Green chitosan-carbon dots nanocomposite hydrogel film with superior properties

Portable sensing methods based on carbon dots for food analysis

Food analysis is significantly important in monitoring food quality and safety for human health. Traditional methods for food detection mainly rely on benchtop instruments and require a certain amount of analysis time, which promotes the development of portable sensors. Portable sensing methods own many advantages over traditional techniques such as flexibility and accessibility in diverse environments, real-time monitoring, cost-effectiveness, and rapid deployment. This review focuses on the portable approaches based on carbon dots (CDs) for food analysis. CDs are zero-dimensional carbon-based material with a size of less than 10 nm. In the manner of sensing, CDs exhibit rich functional groups, low biotoxicity, good biocompatibility, and excellent optical properties. Furthermore, there are many methods for the synthesis of CDs using various precursor materials. The incorporation of CDs into food science and engineering for enhancing food safety control and risk assessment shows promising prospects.

Emerging trends in CDs@hydrogels composites: from materials to applications

Carbon dots (CDs) are nanoscale carbon materials with unique optical properties and biocompatibility. Their applications are limited by their tendency to aggregate or oxidize in aqueous environments. Turning weakness to strengths, CDs can be incorporated with hydrogels, which are three-dimensional networks of crosslinked polymers that can retain large amounts of water. Hydrogels can provide a stable and tunable matrix for CDs, enhancing their fluorescence, stability, and functionality. CDs@hydrogels, known for their ease of synthesis, strong binding capabilities, and rich surface functional groups, have emerged as promising composite materials. In this review, recent advances in the synthesis and characterization of CDs@hydrogels, composite materials composed of CDs and various types of natural or synthetic hydrogels, are summarized. The potential applications of CDs@hydrogels in fluorescence sensing, adsorption, drug delivery, antibacterial activity, flexible electronics, and energy storage are also highlighted. The current challenges and future prospects of CDs@hydrogels systems for the novel functional materials are discussed.

Cellulose nanofiber-based multifunctional composite films integrated with zinc doped-grapefruit peel-based carbon quantum dots

This study aimed to develop a multifunctional active composite film to extend the shelf life of minced pork. The composite film was prepared by incorporating zinc-doped grapefruit peel-derived carbon quantum dots (Zn-GFP-CD) into a cellulose nanofiber (CNF) matrix. The resulting film significantly improved UV-blocking properties from 39.0 % to 85.7 % while maintaining the film transparency. Additionally, the CNF/Zn-GFP-CD5% composite film exhibits strong antioxidant activity with ABTS and DPPH radical scavenging activities of 99.8 % and 77.4 %, respectively. The composite film also showed excellent antibacterial activity against both Gram-negative and Gram-positive bacteria. When used in minced pork packaging, the composite films effectively inhibit bacterial growth, maintaining bacterial levels below 7 Log CFU/g after 15 days and sustaining a red color over a 21-day storage period. Additionally, a significant reduction in the lipid oxidation of the minced pork was observed. These CNF/Zn-GFP-CD composite films have a great potential for active food packaging applications to extend shelf life and maintain the visual quality of packaged meat.

A bio-inspired co-simulation crawling robot enabled by a carbon dot-doped dielectric elastomer

Flexible actuation materials play a crucial role in biomimetic robots. Seeking methods to enhance actuation and functionality is one of the directions in which actuators strive to meet the high-performance and diverse requirements of environmental conditions. Herein, by utilizing the method of adsorbing N-doped carbon dots (NCDs) onto SiO2 to form clusters of functional particles, a NCDs@SiO2/PDMS elastomer was prepared and its combined optical and electrical co-stimulation properties were effectively harnessed to develop a biomimetic crawling robot resembling Rhagophthalmus (firefly). The introduction of NCDs@SiO2 cluster particles not only effectively improves the mechanical and dielectric properties of the elastomer but also exhibits fluorescence response and actuation response under the co-stimulation of UV and electricity, respectively. Additionally, a hybrid dielectric elastomer actuator (DEA) with a transparent SWCNT mesh electrode exhibits two notable advancements: an 826% increase in out-of-plane displacement under low electric field stimulation compared to the pure matrix and the ability of NCDs to maintain a stable excited state within the polymer for an extended duration under UV-excitation. Simultaneously, the transparent biomimetic crawling robot can stealthily move in specific environments and fluoresce under UV light.

Active Fish Gelatin/Chitosan Blend Film Incorporated with Guava Leaf Powder Carbon Dots: Properties, Release and Antioxidant Activity

Active packaging is an innovative approach to prolonge the shelf-life of food products while ensuring their quality and safety. Carbon dots (CDs) from biomass as active fillers for biopolymer films have been introduced to improve their bioactivities as well as properties. Gelatin/chitosan (G/C) blend films containing active guava leaf powder carbon dots (GL-CDs) at various levels (0-3%, w/w) were prepared by the solvent casting method and characterized. Thickness of the control increased from 0.033 to 0.041 mm when 3% GL-CDs were added (G/C-CD-3%). Young's modulus of the resulting films increased (485.67-759.00 MPa), whereas the tensile strength (26.92-17.77 MPa) and elongation at break decreased (14.89-5.48%) as the GL-CDs' level upsurged (p < 0.05). Water vapor barrier property and water contact angle of the film were enhanced when incorporated with GL-CDs (p < 0.05). GL-CDs had a negligible impact on film microstructure, while GL-CDs interacted with gelatin or chitosan, as determined by FTIR. The release of GL-CDs from blend films was more pronounced in water than in alcoholic solutions (10-95% ethanol). The addition of GL-CDs improved the UV light barrier properties and antioxidant activities of the resultant films in a dose-dependent manner. Thus, GL-CD-added gelatin/chitosan blend films with antioxidant activities could be employed as potential active packaging for the food industry.

Designing of chitosan/gelatin based nanocomposite films integrated with Vachellia nilotica gum carbon dots for smart food packaging applications

Microbial growth and exposure to UV light is a persistent global concern resulting in food spoilage, therefore, smart packaging is crucial for the availability of safer and quality food. Present work describes fabrication of chitosan (CH) and gelatin (GL) based nanocomposite films by introducing green source, highly fluorescent Vachillia nilotica gum-derived carbon dots (VNG-CDs). The VNG-CDs and incorporated CH/GL nanocomposite films were characterized by UV-Visible, FTIR, XRD, SEM and TGA analysis. The FTIR and XRD data revealed that VNG-CDs, chitosan, gelatin, and glycerol are combined/interlinked to form homogeneous nanocomposite films. The inclusion of VNG-CDs to CS/GL-CDs nanocomposite film efficiently enhanced the thermal stability and improved mechanical properties. VNG-CDs added to films markedly blocked the ultraviolet light and their effectiveness improved as concentration of CDs increases, being >90 % in UVC (200-280 nm) region. The prepared CS/GL-CDs nanocomposite films manifested radical scavenging activity, reducing capability and also excellently inhibited growth of E. coli, K. pneumonia and S. aureus bacteria. The viability of CS/GL-CDs nanocomposite films examined using banana as a model fruit extending the storage time by two weeks. In conclusion, CH/GL films containing VNG-CDs can be developed into smart packaging materials with enhanced protection and antimicrobial properties.

Application of Multicolor Fluorescent Carbon Dots Based on Tea Polyphenols in a White Light-Emitting Diode and Room-Temperature Phosphorescence

Carbon dots (CDs) are new carbon nanomaterials, among which those prepared from biomass are popular due to their excellent optical properties and environmental friendliness. As representative natural phenolic compounds, tea polyphenols are ideal precursors with fluorescent aromatic rings and phenolic hydroxyl structures. Usually, polyphenolic precursors can only be used to produce blue or green fluorescent CDs, and fluorescence in long wavelength domains, such as orange or red, cannot be achieved. Herein, the high reactivity of the phenolic hydroxyl groups in tea polyphenols with o-phthalaldehyde was exploited to modulate the pH during the carbonation process, which led to redshifts of the fluorescence wavelengths. Different pH values during the reaction caused the precursors to take different reaction paths and form fluorescent groups exhibiting different conjugated structures, resulting in carbon dots providing different fluorescent colors. Finally, by utilizing the in situ hydrolysis of ethyl orthosilicate, the tea polyphenol-based carbon dots were embedded into a silica matrix, inducing phosphorescence of the carbon dots. This study provides a new approach for green preparation and application of natural polyphenolic CDs.

Sustainable packaging film based on cellulose nanofibres/pullulan impregnated with zinc-doped carbon dots derived from avocado peel to extend the shelf life of chicken and tofu

A cellulose nanofiber (CNF)/pullulan (PUL) based multifunctional composite film was developed for active packaging applications by incorporating Zn-doped avocado-derived carbon dots (Zn-ACDs). The incorporation of Zn-ACDs improved the interfacial compatibility and produced a dense cross-sectional structure of the composite films. The Zn-ACDs added film showed no significant difference in water vapor permeability and surface hydrophilicity compared to the neat CNF/PUL film, but the tensile strength and elongation at break increased by ~45.4 % and ~64.1 %, respectively. The addition of 5 wt% Zn-ACDs to the CNF/PUL matrix resulted in 100.0 % UV blocking properties, excellent antioxidant activity (100.0 % for ABTS and 68.0 % for DPPH), and complete eradication of foodborne pathogens such as Listeria monocytogenes ATCC 15313 and Escherichia coli O157:H7 after 3 h of exposure. The CNF/PUL composite film with Zn-ACDs applied to the active packaging of chicken and tofu significantly reduced the total growth of aerobic microorganisms without significantly changing the actual color of the packaged chicken and tofu for 9 days at 10°C. This study demonstrates that CNF/PUL composite films with Zn-ACDs are a sustainable and environmentally friendly option for protecting food from microbial contamination.

Route-dependent tailoring of carbon dot release in alginate hydrogel beads (HB-Alg@WTR-CDs): A versatile platform for biomedical applications

The present investigation explores the different pathways for development of waste tea residue carbon dots (WTR-CDs) loading into hydrogel matrix for WTR-CDs releasing probe. Fluorescent WTR-CDs incorporated into hydrogel matrix were synthesized by valorisation of kitchen waste tea by simple carbonization method (λem = 450 nm, ΦWTR-CDs =18.45 %). Biopolymeric alginate-based hydrogel beads (HB-Alg) were prepared by simple extrusion method. Three routes (ex-situ/in-situ) were employed for loading of WTR-CDs into hydrogel matrix. Successful synthesis of WTR-CDs and its loading into hydrogel matrix was confirmed via various characterization techniques. Developed protocol was employed for stimuli-responsive cumulative release of WTR-CDs study (pH = 3.0, 7.4, 9.0) was monitored over 7 days. Results suggests that, the HB-Alg@WTR-CDs-A system with in-situ loaded WTR-CDs have sustained release due to ionic interaction of WTR-CDs with crosslinked polymer network, whereas in HB-Alg@WTR-CDs-B, WTR-CDs loaded in wet-beads having burst release in which loosely bound WTR-CDs into hydrogel cavities releases rapidly. While, in case of HB-Alg@WTR-CDs-C, lowest release was observed due to weakly surface bound WTR-CDs, low loading and shrinkage of pores into dry-beads. Radical scavenging activity was studied and shown antioxidant properties of WTR-Powder, WTR-CDs and HB-Alg@WTR-CDs-A,B,C. Cytotoxicity of all systems was checked via CAM assay and significant growth in blood vascularization with no loss of chick embryo confirming the released WTR-CDs are biocompatible. Successful investigation and summarization of results ensure that, waste-valorisation, simple, sustainable, and smart hydrogel systems with different routes of WTR-CDs loading have opened a window to understand the mechanistic pathways in release behaviour. This robust approach for improvement of smarter and biocompatible materials can be fruitfully applicable in advanced, controlled and stimuli responsive delivery probes.

Animal derived biopolymers for food packaging applications: A review

It is essential to use environment-friendly, non-toxic, biodegradable and sustainable materials for various applications. Biopolymers are derived from renewable sources like plants, microorganisms, and agricultural wastes. Unlike conventional polymers, biopolymer has a lower carbon footprint and contributes less to greenhouse gas emission. All biopolymers are biodegradable, meaning natural processes can break them down into harmless products such as water and biomass. This property is of utmost importance for various sustainable applications. This review discusses different classifications of biopolymers based on origin, including plant-based, animal-based and micro-organism-based biopolymers. The review also discusses the desirable properties that are required in materials for their use as packaging material. It also discusses the different processes used in modifying the biopolymer to improve its properties. Finally, this review shows the recent developments taking place in using specifically animal origin-based biopolymer and its use in packaging material. It was observed that animal-origin-based biopolymers, although they possess unique properties however, are less explored than plant-origin biopolymers. The animal-origin-based biopolymers covered in this review are chitosan, gelatin, collagen, keratin, casein, whey, hyaluronic acid and silk fibroin. This review will help in renewing research interest in animal-origin biopolymers. In summary, biopolymer offers a sustainable and environment-friendly alternative to conventional polymers. Their versatility, biocompatibility will help create a more sustainable future.

Synthesis of multicolor luminescent carbon dots based on carboxymethyl chitosan for cell imaging and wound healing application: In vitro and in vivo studies

The construction of biomaterials that can facilitate wound healing is significantly challenging in the medical field, and bacterial infections increase this complexity. In this study, we selected the biomacromolecule carboxymethyl chitosan as a carbon source and citric acid as an auxiliary carbon source. We prepared carbon quantum dots with multicolor luminescence properties and higher quantum yields (QYs) using a facile one-pot hydrothermal method. We characterized them to select carbon dots (CDs) suitable for cell growth. Subsequently, their biocompatibility with L929 cells, antibacterial properties against Staphylococcus aureus, and efficiency in promoting wound healing in vivo were investigated. Our experimental results showed that CDs at an appropriate concentration had excellent bioimaging ability, were suitable for cell growth, and accelerated the healing of infected wounds. We believe these bioactive CDs have great potential in promoting wound healing.

Turning food waste into value-added carbon dots for sustainable food packaging application: A review

Carbon dots (CDs) are a recent addition to the nanocarbon family, encompassing both crystalline and amorphous phases. They have sparked significant research interest due to their unique electrical and optical properties, remarkable biocompatibility, outstanding mechanical characteristics, customizable surface chemistry, and negligible cytotoxicity. Their current applications are mainly limited to flexible photonic and biomedical devices, but they have also garnered attention for their potential use in intelligent packaging. The conversion of food waste into CDs further contributes to the concept of the circular economy. It provides a comprehensive overview of emerging green technologies, energy-saving reactions, and cost-effective starting materials involved in the synthesis of CDs. It also highlights the unique properties of biomass-derived CDs, focusing on their structural performance, cellular toxicity, and functional characteristics. The application of CDs in the food industry, including food packaging, is summarized in a concise manner. This paper sheds light on the current challenges and prospects of utilizing CDs in the packaging industry. It aims to provide researchers with a roadmap to tailor the properties of CDs to suit specific applications in the food industry, particularly in food packaging.

Characterisation, slow-release, and antibacterial properties of carboxymethyl chitosan/inulin hydrogel film loaded with novel antilisterial durancin GL

This paper reports the development of a hydrogel film with antibacterial activity and controlled release characteristics. Carboxymethyl chitosan (CMCS) is grafted onto durancin GL and inulin via a mediated reaction between N-hydroxysuccinimide and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride. Rheology tests, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy, and lap shear tests confirmed the formation of a stable chemical cross-linking and excellent adhesion hydrogel with 4 % CMCS and 8 % inulin. The CMCS/inulin hydrogel film loaded with durancin GL appears transparent and uniform. FTIR spectroscopy results reveal the interaction mode among CMCS, inulin, durancin GL, and the hydrogel film structure. Cross-linking improved thermal stability and water-vapour barrier performance. The hydrophobicity of CMCS/inulin @Durancin GL increased under a durancin GL concentration of 0.036 g/30 mL, and the release of active substances is prolonged. In-vitro antibacterial capacity and salmon preservation experiments show that the addition of durancin GL enhanced the antibacterial activity of the hydrogel film. Therefore, CMCS/inulin@Durancin GL hydrogel films can be used as fresh-keeping packaging materials in practical applications.

Two-Pronged Approach: Synergistic Tuning of the Surface and Carbon Core to Achieve Yellow Emission in Lignin-Based Carbon Dots

In this study, yellow emissive lignin-based carbon dots (Y-CDs) were successfully prepared through a synergistic approach to adjust its surface and carbon core states. The lignin was initially effectively oxidized and carboxymethylated to impart abundant -COOH onto the precursor, which eventually adjusts the surface state of the CDs. Subsequently, α-naphthol was employed during the solvothermal treatment of lignin with the aim of elevating the sp2 domain content in the CDs and, thus, adjusting its carbon core state. The obtained Y-CDs possessed abundant carboxyl groups and nanoscale spherical shape with an average diameter of 5.21 nm. Meanwhile, the energy gap of Y-CDs was 2.46 eV and the optimal emission wavelength was 561 nm under the excitation wavelength of 410 nm. Synergistic adjusting carbon core and surface of the Y-CDs would alter the surface charge distribution and promote the delocalization of π electrons, and thus lead to a red shifting with the emission wavelength of 154 nm. Furthermore, a shape memory film with excellent recovery performance and fluorescent properties was designed by embedding the Y-CDs into polyvinyl alcohol (PVA) polymer. The incorporation of Y-CDs could impart the film with considerable high-value applications in the fields of intelligent sensing, biomedicine, and tissue engineering.

Photodynamic antibacterial chitosan/nitrogen-doped carbon dots composite packaging film for food preservation applications

In this study, we synthesized nitrogen-doped carbon dots (N-CDs) with remarkable photodynamic antibacterial properties by a hydrothermal method. The composite film was prepared by solvent casting method, compounding N-CDs with chitosan (CS). The morphology and structure of the films were analyzed by Fourier-transformed infrared spectroscopy (FTIR), scanning electron microscope (SEM), atomic force microscope (AFM), and transmission electron microscope (TEM) techniques. The films' mechanical, barrier, thermal stability, and antibacterial properties were analyzed. A preservation test of the films was studied on the samples of pork, volatile base nitrogen (TVB-N), total viable count (TVC), and pH were determined. Besides, the effect of film on the preservation of blueberries was observed. The study found that, compared with the CS film, the CS/N-CDs composite film is strong and flexible, with good UV light barrier performance. The prepared CS/7 % N-CDs composites showed high photodynamic antibacterial rates of 91.2 % and 99.9 % for E. coli and S. aureus, respectively. In the preservation of pork, it was found that its pH, TVB-N, and TVC indicators were significantly lower. The extent of mold contamination and anthocyanin loss was less in the CS/3 % N-CDs composite film-coated group, which could greatly extend the shelf life of food.

Natural and biocompatible dressing unit based on tea carbon dots modified core-shell electrospun fiber for diabetic wound disinfection and healing

Wound infection and healing in patients with diabetes is one of the complex problems in trauma treatment. Therefore, designing and preparing an advanced dressing membrane for treating the wounds of such patients is essential. In this study, a zein film with biological tea carbon dots (TCDs) and calcium peroxide (CaO₂) as the main components for promoting diabetic wound healing was prepared by an electrospinning technique, which combines the advantages of natural degradability and biosafety. CaO₂ is a biocompatible material with a microsphere structure that reacts with water to release hydrogen peroxide and calcium ions. TCDs with a small diameter were doped in the membrane to mitigate its properties while improving the antibacterial and healing effects of the membrane. TCDs/CaO₂ was mixed with ethyl cellulose-modified zein (ZE) to prepare the dressing membrane. The antibacterial properties, biocompatibility and wound-healing properties of the composite membrane were investigated by antibacterial experiment, cell experiment and a full-thickness skin defect. TCDs/CaO₂ @ZE exhibited significant anti-inflammatory and wound healing-promoting properties in diabetic rats, without any cytotoxicity. This study is meaningful in developing a natural and biocompatible dressing membrane for diabetic wound healing, which shows a promising application in wound disinfection and recovery in patients with chronic diseases.

Supramolecular Chemistry of Carbon-Based Dots Offers Widespread Opportunities

Carbon dots are an emerging class of nanomaterials that has recently attracted considerable attention for applications that span from biomedicine to energy. These photoluminescent carbon nanoparticles are defined by characteristic sizes of <10 nm, a carbon-based core and various functional groups at their surface. Although the surface groups are widely used to establish non-covalent bonds (through electrostatic interactions, coordinative bonds, and hydrogen bonds) with various other (bio)molecules and polymers, the carbonaceous core could also establish non-covalent bonds (ππ stacking or hydrophobic interactions) with π-extended or apolar compounds. The surface functional groups, in addition, can be modified by various post-synthetic chemical procedures to fine-tune the supramolecular interactions. Our contribution categorizes and analyzes the interactions that are commonly used to engineer carbon dots-based materials and discusses how they have allowed preparation of functional assemblies and architectures used for sensing, (bio)imaging, therapeutic applications, catalysis, and devices. Using non-covalent interactions as a bottom-up approach to prepare carbon dots-based assemblies and composites can exploit the unique features of supramolecular chemistry, which include adaptability, tunability, and stimuli-responsiveness due to the dynamic nature of the non-covalent interactions. It is expected that focusing on the various supramolecular possibilities will influence the future development of this class of nanomaterials.

Carbon Dot-Based Hydrogels: Preparations, Properties, and Applications

Hydrogels have extremely high moisture content, which makes it very soft and excellently biocompatible. They have become an important soft material and have a wide range of applications in various fields such as biomedicine, bionic smart material, and electrochemistry. Carbon dot (CD)-based hydrogels are based on carbon dots (CDs) and auxiliary substances, forming a gel material with comprehensive properties of individual components. CDs embedding in hydrogels could not only solve their aggregation-caused quenching (ACQ) effect, but also manipulate the properties of hydrogels and even bring some novel properties, achieving a win-win situation. In this review, the preparation methods, formation mechanism, and properties of CD-based hydrogels, and their applications in biomedicine, sensing, adsorption, energy storage, and catalysis -are summarized. Finally, a brief discussion on future research directions of CD-based hydrogels will be given.

Multifunctional role of carbon dot-based polymer nanocomposites in biomedical applications: a review

Carbon-based 0D materials have shown tremendous potential in the development of biomedical applications of the next generation. The astounding results are primarily motivated by their distinctive nanoarchitecture and unique properties. Integrating these properties of 0D carbon nanomaterials into various polymer systems has orchestrated exceptional potential for their use in the development of sustainable and cutting-edge biomedical applications such as biosensors, bioimaging, biomimetic implants and many more. Specifically, carbon dots (CDs) have gained much attention in the development of biomedical devices due to their optoelectronic properties and scope of band manipulation upon surface revamping. The role of CDs in reinforcing various polymeric systems has been reviewed along with discussing unifying concepts of their mechanistic aspects. The study also discussed CDs optical properties via the quantum confinement effect and band gap transition which is further useful in various biomedical application studies.

Chitosan/Starch-Based Active Packaging Film with N, P-Doped Carbon Dots for Meat Packaging

Nitrogen, phosphorus-doped green-tea-derived carbon dots (NP-CDs) incorporated chitosan/starch (Chi/St) based multifunctional nanocomposite films were prepared. FE-SEM images verified a homogeneous distribution of CDs with minimum aggregation in the fabricated films. Incorporating NP-CDs led to enhanced UV-light blocking (93.1% of UV-A and ∼99.7% of UV-B) without significantly affecting the films' water transparency and water vapor permeability. Besides, incorporating NP-CDs into the Chi/St films enhanced antioxidant activity (98.0% for ABTS and 71.4% for DPPH) and displayed strong antibacterial activity against L. monocytogenes, E. coli, and S. aureus. Wrapping the meat in the prepared film and storing it at 20 °C has been shown to reduce bacterial growth (less than 2.5 Log CFU/g after 48 h) without significantly altering the actual color of the wrapped meat. The Chi/St film loaded with NP-CD has high potential as an active packaging material to ensure safety and extend the shelf life of meat products.

Doped Carbon Quantum Dots Reinforced Hydrogels for Sustained Delivery of Molecular Cargo

Hydrogels have emerged as important soft materials with numerous applications in fields including biomedicine, biomimetic smart materials, and electrochemistry. Because of their outstanding photo-physical properties and prolonged colloidal stability, the serendipitous findings of carbon quantum dots (CQDs) have introduced a new topic of investigation for materials scientists. CQDs confined polymeric hydrogel nanocomposites have emerged as novel materials with integrated properties of the individual constituents, resulting in vital uses in the realm of soft nanomaterials. Immobilizing CQDs within hydrogels has been shown to be a smart tactic for preventing the aggregation-caused quenching effect and also for manipulating the characteristics of hydrogels and introducing new properties. The combination of these two very different types of materials results in not only structural diversity but also significant improvements in many property aspects, leading to novel multifunctional materials. This review covers the synthesis of doped CQDs, different fabrication techniques for nanostructured materials made of CQDs and polymers, as well as their applications in sustained drug delivery. Finally, a brief overview of the present market and future perspectives are discussed.

Antibacterial Carbon Dots-Based Composites

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Carbon Quantum Dot/Chitosan-Derived Hydrogels with Photo-stress-pH Multiresponsiveness for Wearable Sensors

In recent years, hydrogels have attracted extensive attention in smart sensing owing to their biocompatibility and high elasticity. However, it is still a challenge to develop hydrogels with excellent multiple responsiveness for smart wearable sensors. In this paper, a facile synthesis of carbon quantum dots (CQDs)-doped cross-linked chitosan quaternary/carboxymethylcellulose hydrogels (CCCDs) is presented. Designing of dual network hydrogels decorated with CQDs provides abundant crosslinking and improves the mechanical properties of the hydrogels. The hydrogel-based strain sensor exhibits excellent sensitivity (gauge factor: 9.88), linearity (R² : 0.97), stretchable ability (stress: 0.67 MPa; strain: 404%), good cyclicity, and durability. The luminescent properties are endowed by the CQDs further broaden the application of hydrogels for realizing flexible electronics. More interestingly, the strain sensor based on CCCDs hydrogel demonstrates photo responsiveness (ΔR/R₀ ≈20%) and pH responsiveness (pH range ≈4-7) performance. CCCDs hydrogels can be used for gesture recognition and light sensing switch. As a proof-of-concept, a smart wearable sensor is designed for monitoring human activities and detecting pH variation in human sweat during exercise. This study reveals new possibilities for further applications in wearable health monitoring.

Carboxymethylcellulose/agar-based functional film incorporated with nitrogen-doped polyethylene glycol-derived carbon dots for active packaging applications

The present investigation demonstrates the role of nitrogen doping on polyethylene glycol (PEG)-derived carbon dots on optical, antibacterial, and antioxidant activity. CDs' average size and surface charge were determined using transmission electron microscopy (TEM) and a zeta sizer with 2.14 ± 0.6 nm and -20 mV, respectively. Though CDs without N-doping (PCD) did not show any significant antioxidant and antimicrobial activities, the CDs doped with nitrogen (NPCD) showed potent antioxidant (25% and 100% DPPH and ABTS radical scavenging activity) and significant antimicrobial activity against Gram-positive (1.8 cm inhibition zone) and Gram-negative (1.4 cm) bacteria. Both carbon dots were loaded into the carboxymethyl cellulose (CMC)/agar-based film with different concentrations (4 and 8%) and showed a significant increase in the physicochemical properties, and UV-blocking property was increased from 53.7 to 79.9% without sacrificing the transparency. The NPCD-loaded film also showed high antioxidant (DPPH 12.7% and ABTS 67%) and potent antibacterial activity. In particular, the CMC/agar film loaded with 8% NPCD destroyed Escherichia coli and Listeria monocytogenes completely after 6 h of incubation.

Cellulose nanofiber-poly(ethylene terephthalate) nanocomposite membrane from waste materials for treatment of petroleum industry wastewater

Petroleum industry wastewater contains high level of crude oil and other types of organic substances that can cause immense harm to the agriculture, aquatic as well as terrestrial organisms. Organic solvent resistance of membranes is very important to treat such wastewater that contains high level of organic pollutants. This work reports the designing of a superhydrophilic and organic solvent resistant nanocomposite membrane using waste bottles made of poly(ethylene terephthalate) (PET) and cellulosic papers. Using in-situ synthesized cellulose nanofibers we could successfully fabricate porous membranes which is not possible for bare PET matrix using water as nonsolvent. Thus, we could successfully replace methanol which was used as a suitable non-solvent in earlier reports by distilled water. We successfully used the membrane for separation of synthetic crude oil-water emulsion. The membrane showed permeability up to 98 Lm^-2h^-1 applying pressure of 1.5 bar. The membrane also achieved removal of more than 97 % of organic substances from a crude oil-water emulsion system. The optimum membrane also showed good thermal stability with initial degradation temperature ∼350 °C and tensile strength of 0.86 MPa. The antimicrobial property of the nanocomposite membranes could be achieved by coating its surface with carbon dots rooted graphene oxide.

Progression of Quantum Dots Confined Polymeric Systems for Sensorics

The substantial fluorescence (FL) capabilities, exceptional photophysical qualities, and long-term colloidal stability of quantum dots (QDs) have aroused a lot of interest in recent years. QDs have strong and wide optical absorption, good chemical stability, quick transfer characteristics, and facile customization. Adding polymeric materials to QDs improves their effectiveness. QDs/polymer hybrids have implications in sensors, photonics, transistors, pharmaceutical transport, and other domains. There are a great number of review articles available online discussing the creation of CDs and their many uses. There are certain review papers that can be found online that describe the creation of composites as well as their many different uses. For QDs/polymer hybrids, the emission spectra were nearly equal to those of QDs, indicating that the optical characteristics of QDs were substantially preserved. They performed well as biochemical and biophysical detectors/sensors for a variety of targets because of their FL quenching efficacy. This article concludes by discussing the difficulties that still need to be overcome as well as the outlook for the future of QDs/polymer hybrids.

Facile Access to Fabricate Carbon Dots and Perspective of Large-Scale Applications

Carbon dots (CDs), fluorescent carbon nanoparticles with particle sizes < 10 nm, are constantly being developed for potential large-scale applications. Recently, methods allow CD synthesis to be carried out on large-scale preparation in a controlled fashion are potentially important for multiple disciplines, including bottom-up strategy, top-down method. In this review, the recent progresses in the research of the methods for large-scale production of CDs and their functionalization are summarized. Especially, the methods of CD synthesis, such as large-scale preparation, hydrothermal/solvothermal, microwave-assisted, magnetic hyperthermia microfluidic and other methods, along with functionalization of CDs, are summarized in detail. By promising applications of CDs, there are three aspects have been already reported, such as enhancing mechanical properties, flame retardancy, and energy storage. Also, future development of CDs is prospected.

Development of curcumin incorporated composite films based on chitin and glucan complexes extracted from Agaricus bisporus for active packaging of chicken breast meat

Composite films were prepared by combining different concentrations of curcumin with chitin and glucan complexes (CGCs) extracted from Agaricus bisporus via a solution casting method. The developed curcumin doped CGC (CGC/Cu) films were characterized in terms of surface, optical, structural, barrier, mechanical, antioxidant, and antimicrobial properties. The biodegradability of CGC/Cu films was determined in soil for 14 days. The incorporation of curcumin significantly affected the surface morphology and improved light barrier properties, radical scavenging activity, and total phenolic content of the films. The CGC/Cu films containing different concentrations of curcumin showed antibacterial activity against Escherichia coli, while antibacterial activity against Staphylococcus aureus was not observed with the developed films. Afterward, the microbial properties of the fresh chicken breast were examined during refrigerated storage for 10 days. The shelf-life of chicken samples wrapped in the developed film was extended at least 40 % compared to the control sample. In conclusion, curcumin incorporated CGC based films can serve as a promising biodegradable active packaging material to improve the shelf-life of meat products.

Exhausted Cr(VI) Sensing/Removal Aerogels Are Recycled for Water Purification and Solar-Thermal Energy Generation

Heavy metal pollution has resulted in numerous environmental challenges. However, classic approaches, involving the use of solid adsorbents are subject to limitations, including the high energy consumption required for processing before and after use. Accordingly, strategies that facilitate the use of metal capture media that extends beyond waste remediation are attractive. Herein, a porous fluorescent aerogel (CPC aerogel) is constructed by immersing amino-based carbon dots (CDs-NH₂ ) into a polyethyleneimine (PEI)/carboxymethylated cellulose (CMC) aerogel network for the simultaneous detection and adsorption of Cr(VI). Adsorption experiments confirm that the CMC/PEI containing CDs-NH₂ aerogel (CPC aerogel) exhibits good Cr(VI) extraction capacity, and can reach a level that conforms with industrial water safety standards. In addition, the CPC aerogel can continuously detect and remove Cr(VI) at high flux. Following Cr(VI) absorption, the CPC aerogel may be vulcanized (MS_x -CPC gel) and used for solar thermoelectric generation resulting in power generation. Additionally, the MS_x -CPC gel can be used for solar steam generation and exhibits excellent evaporation rates of ≈1.31 kg m^-2 h^-1 under one sun irradiation. The results serve to underscore how materials designed for metal ion recognition and adsorption once exhausted can be exploited to provide materials for solar thermoelectric power generation and seawater desalination.

Aflatoxin B1 Acts as an Effective Energy Donor to Enhance Fluorescence of Yellow Emissive Carbon Dots

Carbon dots (CDs) are versatile fluorescent nanocrystals with unique optical and structural properties and are commonly used in biosensing, bioimaging, and biomolecule tagging studies. However, fluorescence of CDs is brightest in the wavelength range of 430-530 nm, which overlaps with the autofluorescence range of many eukaryotic cells and makes CDs impractical for in vivo and in vitro imaging studies. Thus, the design of yellow-red emissive CDs with high quantum yield is of importance. In this study, the quantum yield of traditional yellow emissive CDs was enhanced by two different methods: (1) the surface of traditional yellow emissive CDs passivated with a biomolecule, urea, through easy, rapid, inexpensive microwave assisted synthesis methods and (2) a fluorescent biomolecule, aflatoxin B1, used as an energy donor for yellow emissive CDs. In the first method, the quantum yield of the CDs was enhanced to 51%. In the second method, an efficient energy transfer (above 40%) from aflatoxin B1 to the CDs was observed. Our study showed that highly luminescent yellow emissive CDs can be synthesized by simple, rapid microwave assisted synthesis methods, and these CDs are potential candidates to sense aflatoxin B1. Furthermore, our results indicated that Aflatoxin B1 can be considered as an emission booster for CDs.

Facile method to synthesize fluorescent chitosan hydrogels for selective detection and adsorption of Hg2+/Hg. Carbohydr Polym 2022;288:119417. [PMID: 35450660 DOI: 10.1016/j.carbpol.2022.119417]

Fluorescent chitosan-based hydrogel for the selective detection and adsorption of Hg²⁺/Hg⁺ in aqueous environment was prepared through three-step synthesis strategy. NO₂-Boron-dipyrrolemethene (BODIPY) was prepared firstly, and then the -NO₂ group was reduced to -NH₂ group. Finally, the NH₂-BODIPY was introduced to chitosan by Schiff base formation reaction through bi-aldehyde. Eventually, fluorescent chitosan hydrogel was obtained. The as-prepared fluorescent hydrogel probe could detect Hg²⁺/Hg⁺ through PET mechanism with the detection limit of 0.3 μM. The recognition site which combines Hg²⁺/Hg⁺ is CN, it is just formed in the reaction with chitosan and the amino group on BODIPY. Adsorption capacity of the fluorescent hydrogel is 121 mg·g^-1, which is almost seven times of the original chitosan. The isotherm and kinetics of Hg²⁺/Hg⁺ removal follows Langmuir isotherm and pseudo-second order kinetics, respectively. Besides, a series of fluorescent hydrogels were prepared to compare the elasticity, hydropHilicity, fluorescence intensity and adsorption capacity.

Guar gum-sodium alginate nanocomposite film as a smart fluorescence-based humidity sensor: A smart packaging material

Perishable packed foods are easily damaged by the change in relative humidity. In this work, we demonstrate that guar gum- sodium alginate blending with glucose-glycerol carbon dots nanocomposite film can be used to detect relative humidity. The fabricated nanocomposite film was an excellent smart sensor based on the fluorescence 'on-off' mechanisms against humidity. The study demonstrates that at different relative humidity conditions, such as 11 %, 33 %, 75.30 %, 84 %, and 97 %, there is a change in the fluorescence of biocomposite films under UV light. The practical feasibility of the biocomposite developed film was tested in real conditions by placing a piece of bread with high humidity conditions wrapped with the developed nanocomposite film. It was observed that under such conditions, marked quenching of fluorescence was observed and hence detection of humidity was possible. Hence, the fabricated nanocomposite film can monitor the packed food freshness using just a UV light source. Such biopolymer nanocomposite is potential materials and may find application as smart packaging materials, especially as food packaging materials.

High-Power Laser Deposition of Chitosan Polymers: Medical and Environmental Applications

High-power laser irradiation interaction with natural polymers in biocomposites and Laser-Induced Chitin Deacetylation (LICD) was studied in this work, in order to produce thin films consisting of chitosan composite. The new method can lead to a cutting-edge technology, as a response to the concern regarding the accumulation of “natural biological waste” and its use. The process consists of high-power laser irradiation applied on oyster shells as the target and deposition of the ablated material on different substrates. The obtained thin films we analyzed by FTIR, UV-VIS and LIF spectroscopy, as well as SEM-EDS and AFM. All the results indicated that chitin was extracted from the shell composite material and converted to chitosan by deacetylation. It was, thus, evidenced that chemical transformation in the chitin polymer side-chain occurs during laser irradiation of the oyster shell and in the resulted plasma plume of ablation. The numerical simulation in COMSOL performed for this study anticipates and confirms the experimental results of chitin deacetylation, also providing information about the conditions required for the physico-chemical processes involved. The high sorption properties of the thin films obtained by a LICD procedure is evidenced in the study. This quality suggests that they should be used in transdermal patch construction due to the known hemostatic and antibacterial effects of chitosan. The resulting composite materials, consisting of the chitosan thin films deposited on hemp fabric, are also suitable for micro-filters in water decontamination or in other filtering processes.

Application of carbon dots in food preservation: a critical review for packaging enhancers and food preservatives

Carbon dots (CDs) have two unique advantages: one is ease of synthesis at low price, the other is desirable physical and chemical properties, such as ultra-small size, abundant surface functional groups, nontoxic/low-toxicity, good biocompatibility, excellent antibacterial and antioxidant activities etc. These advantages provide opportunities for the development of new food packaging enhancers and food preservatives. This paper systematically reviews the studies of CDs used to strengthen the physical properties of food packaging, including strengthen mechanical strength, ultraviolet (UV) barrier properties and water barrier properties. It also reviews the researches of CDs used to fabricate active packaging with antioxidant and/or antibacterial properties and intelligent packaging with the capacity of sensing the freshness of food. In addition, it analyzes the antioxidant and antibacterial properties of CDs as preservatives, and discusses the effect of CDs applied as coating agents and nano-level food additives for extension the shelf life of food samples. It also provides a brief review on the security and the release behavior of CDs.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Bioactive Graphene Quantum Dots Based Polymer Composite for Biomedical Applications

Today, nanomedicine seeks to develop new polymer composites to overcome current problems in diagnosing and treating common diseases, especially cancer. To achieve this goal, research on polymer composites has expanded so that, in recent years, interdisciplinary collaborations between scientists have been expanding day by day. The synthesis and applications of bioactive GQD-based polymer composites have been investigated in medicine and biomedicine. Bioactive GQD-based polymer composites have a special role as drug delivery carriers. Bioactive GQDs are one of the newcomers to the list of carbon-based nanomaterials. In addition, the antibacterial and anti-diabetic potentials of bioactive GQDs are already known. Due to their highly specific surface properties, π-π aggregation, and hydrophobic interactions, bioactive GQD-based polymer composites have a high drug loading capacity, and, in case of proper correction, can be used as an excellent option for the release of anticancer drugs, gene carriers, biosensors, bioimaging, antibacterial applications, cell culture, and tissue engineering. In this paper, we summarize recent advances in using bioactive GQD-based polymer composites in drug delivery, gene delivery, thermal therapy, thermodynamic therapy, bioimaging, tissue engineering, bioactive GQD synthesis, and GQD green resuscitation, in addition to examining GQD-based polymer composites.

An all-in-one nanomaterial derived from rGO-MoS2 for photo/chemotherapy of tuberculosis

A combination of therapeutic modalities has recently emerged as an alternative technique for combating Mycobacterium tuberculosis.

Carbon dot composites for bioapplications: a review

Recent advancements in the synthesis of carbon dot composites and their applications in biomedical fields (bioimaging, drug delivery and biosensing) have been carefully summarized. The current challenges and future trends of CD composites in this field have also been discussed.

Carbon dots synthesized from microorganisms and food by-products: active and smart food packaging applications

Nanotechnology is rapidly becoming a commercial reality for application in food packaging. In particular, the incorporation of nanoparticles into packaging materials is being used to increase the shelf life and safety of foods. Carbon dots (C-dots) have a diverse range of potential applications in food packaging. They can be synthesized from environmentally friendly sources such as microorganisms, food by-products, and waste streams, or they may be generated in foods during normal processing operations, such as cooking. These processes often produce nitrogen- and sulfur-rich heteroatom-doped C-dots, which are beneficial for certain applications. The incorporation of C-dots into food packaging materials can improve their mechanical, barrier, and preservative properties. Indeed, C-dots have been used as antioxidant, antimicrobial, photoluminescent, and UV-light blocker additives in food packaging materials to reduce the chemical deterioration and inhibit the growth of pathogenic and spoilage microorganisms in foods. This article reviews recent progress on the synthesis of C-dots from microorganisms and food by-products of animal origin. It then highlights their potential application for the development of active and intelligent food packaging materials. Finally, a discussion of current challenges and future trends is given.