Column adsorption of perchlorate by amine-crosslinked biopolymer based resin and its biological, chemical regeneration properties

Fabrication of novel glutathione-Fe3O4-loaded/activated carbon encapsulated sand bionanocomposites for enhanced removal of diethyl phthalate from aqueous environment in a vertical flow reactor

The extensive use of plasticizers in various industries has made Diethyl phthalate (DEP), a serious threat to the environment and ecological water security, owing to its complex-structure and low-biodegradability. Thus, the present study aimed to design a sustainable sand-coated nano glutathione (GSH) -Fe3O4-loaded/activated carbon (AC) bionanocomposite (AC-GSH-Fe3O4@sand bionanocomposite) for effective removal of DEP from water. Characterization results suggested bionanocomposites' rough and irregular texture due to the uneven distribution of AC and Fe3O4 nanoparticles over the sand. The XRD spectra indicated high crystallinity of bionanocomposites, while the FTIR spectra confirmed the presence of all individual components, i.e., GSH, AC, Fe3O4, and sand. EDX-mapping, AFM, and TGA further verified its elemental composition, topographical changes and thermal stability. The influence of pH (3, 7, 9), bed height (2, 4, 6) cm, and flow rate (2.5, 3.5, 4.5) mL min-1 were studied in a dynamic system with an initial DEP concentration of 50 mg L-1 to investigate the removal behavior of the bionanocomposites. The best DEP removal efficiency (90.18 %) was achieved over 28-h at pH 9, bed-height-4 cm, and flow-rate-3.5 mL min-1, with an optimum qmax-200.25 mg g-1 as determined through Thomas-model. Breakthrough curves were predicted using various column models, and the corresponding parameters essential for column-reactor process design were calculated. The high reusability up to the 10th cycle (≥83.32%) and the effective treatment in complex matrices (tap-water: 90.11 %, river-water: 89.72 %, wastewater: 83.83%) demonstrated bionanocomposites' prominent sustainability. Additionally, the production cost at 6.64 USD per Kg, underscores its potentiality for industrial application. Phytotoxicity assessment on mung-bean revealed better root (5.02 ± 0.27 cm) and shoot (17.64 ± 0.35 cm) growth in the bionanocomposite-treated DEP samples over the untreated samples. Thus, AC-GSH-Fe3O4@sand bionanocomposites could be considered a highly-sustainable, low-cost technique for the effective removal of DEP and other phthalate-esters from contaminated matrices.

A review on hybrid membrane-adsorption systems for intensified water and wastewater treatment: Process configurations, separation targets, and materials applied

In the era of rapid and conspicuous progress of water treatment technologies, combined adsorption and membrane filtration systems have gained great attention as a novel and efficient method for contaminant removal from aqueous phase. Further development of these techniques for water/wastewater treatment applications will be promising for the recovery of water resources as well as reducing the water tension throughout the world. This review introduces the state-of-the-art on the capabilities of the combined adsorption-membrane filtration systems for water and wastewater treatment applications. Technical information including employed materials, superiorities, operational limitations, process sustainability and upgradeing strategies for two general configurations i.e. hybrid (pre-adsorption and post-adsorption) and integrated (film adsorbents, low pressure membrane-adsorption coupling and membrane-adsorption bioreactors) systems has been surveyed and presented. Having a systematic look at the fundamentals of hybridization/integration of the two well-established and efficient separation methods as well as spotlighting the current status and prospectives of the combination strategies, this work will be valuable to all the interested researchers working on design and development of cutting-edge wastewater/water treatment techniques. This review also draws a clear roadmap for either decision making and choosing the best alternative for a specific target in water treatment or making a plan for further enhancement and scale-up of an available strategy.

Biopolymer - A sustainable and efficacious material system for effluent removal

Undesired discharge of various effluents directly into the aquatic ecosystem can adversely affect water quality, endangering aquatic and terrestrial flora and fauna. Therefore, the conceptual design and fabrication of a sustainable system for alleviating the harmful toxins that are discharged into the atmosphere and water bodies using a green sustainable approach is a fundamental standpoint. Adsorptive removal of toxins (∼99% removal efficacy) is one of the most attractive and facile approaches for cleaner technologies that remediate the environmental impacts and provide a safe operating space. Recently, the introduction of biopolymers for the adsorptive abstraction of toxins from water has received considerable attention due to their eclectic accessibility, biodegradability, biocompatibility, non-toxicity, and enhanced removal efficacy (∼ 80-90% for electrospun fibers). This review summarizes the recent literature on the biosorption of various toxins by biopolymers and the possible interaction between the adsorbent and adsorbate, providing an in-depth perspective of the adsorption mechanism. Most of the observed results are explained in terms of (1) biopolymers classification and application, (2) toxicity of various effluents, (3) biopolymers in wastewater treatment and their removal mechanism, and (4) regeneration, reuse, and biodegradation of the adsorbent biopolymer.

Review on biopolymers and composites - Evolving material as adsorbents in removal of environmental pollutants

The presence of pollutants and toxic contaminants in water sources makes it unfit to run through. Though various conventional techniques are on deck, development of new technologies are vital for wastewater treatment and recycling. Polymers have been intensively utilized recently in many industries owing to their unique characteristics. Biopolymers resembles natural alternative to synthetic polymers that can be prepared by linking the monomeric units covalently. Despite the obvious advantages of biopolymers, few reviews have been conducted. This review focuses on biopolymers and composites as suitable adsorbent material for removing pollutants present in environment. The classification of biopolymers and their composites based on the sources, methods of preparation and their potential applications are discussed in detail. Biopolymers have the potentiality of substituting conventional adsorbents due to its unique characteristics. Biopolymer based membranes and effective methods of utilization of biopolymers as suitable adsorbent materials are also briefly elaborated. The mechanism of biopolymers and their membrane-based adsorption has been briefly reviewed. In addition, the methods of regeneration and reuse of used biopolymer based adsorbents are highlighted. The comprehensive content on fate of biopolymer after adsorption is given in brief. Finally, this review concludes the future investigations in recent trends in application of biopolymer in various fields in view of eco-friendly and economic perspectives.

Removal of inorganic toxic contaminants from wastewater using sustainable biomass: A review

Lignocellulosic biomass is most abundant, ecofriendly and sustainable material on this green planet which has received great attention due to exhaustion of petroleum reserves and various environmental complications. Due to its abundance and sustainability, it has been opted in number of advanced applications i.e. synthesis of green chemicals, biofuels, paper, packaging, biocomposite and for discharge of toxic contaminants from wastewaters. Utilization of sustainable biomass for removal of toxic pollutants from wastewater is robust technique due to its low-cost and easy availability. In this review, we have summarized removal of inorganic pollutants by sustainable lignocellulosic biomass in their natural as well as in chemically functionalized form. Various techniques for modification of sustainable biomass have been discussed and it was found that modified biomass showed better biosorption ability as compared to natural biomass. We conclude that modified biomass biosorbents are useful for removal of toxic inorganic pollutants to deficient levels. Several modification strategies can improve the qualities of biosorbent, however grafting is the most successful among them, as demonstrated in this work. The numerous grafting methods using a free radical grafting process are also summarized in this review article. This review also gathers studies comparing sorption capabilities with and without modification using modified and unmodified biosorbents. Chemically modified cellulosic biomass is favoured over untreated biomass because it has a higher adsorption efficiency, which is favoured by a large number of reactive binding sites, improved ion-exchange characteristics, and more functional groups available after modification.

Efficient Fluoride Removal by a Fixed-Bed Column of Self-Assembled Zr(IV)-, Fe(III)-, Cu(II)-Complexed Polyvinyl Alcohol Hydrogel Beads

Fixed-bed column adsorption studies are performed with metal-complexed polyvinyl alcohol (PVA) hydrogel beads to remove fluoride from groundwater. The fixed-bed column (bed height = 8 ± 0.2 cm) of copper-zirconium-PVA (PCZH), zirconium-PVA (PZH), and iron-zirconium-PVA (PFZH) hydrogel beads have equilibrium fluoride removal capacities of 17.26 ± 0.05, 31.67 ± 0.05, and 11.84 ± 0.05 mg g^-1 from a 10 ± 0.20 mg L^-1 fluoride solution of pH 6.5 maintained at a flow rate of 1 ± 0.01 mL min^-1. The breakthrough curves for fluoride adsorption are analyzed by non-linear empirical models of Thomas, Bohart-Adams, Yoon-Nelson, and semi-empirical bed depth service time models. The maximum fluoride adsorption capacities obtained from the Thomas model are 25.66 ± 0.05, 38.17 ± 0.05, and 13.75 ± 0.05 mg g^-1 for PCZH, PZH, and PFZH. Moreover, the column of PZH (bed height = 4 ± 0.2 cm) removes about 1.67 ± 0.05 mg g^-1 of fluoride from the alkaline groundwater sample with high total dissolved solids containing 2.84 ± 0.20 mg L^-1 fluoride maintained at a flow rate of 0.5 ± 0.01 mL min^-1. The fluoride removal efficiency decreases marginally (<1 ± 0.02%) in the presence of interfering ions such as chlorides, sulfates, phosphates, bicarbonates, and nitrates. Furthermore, the fixed-bed column (bed height = 4 ± 0.2 cm) of PCZH, PZH, and PFZH remove 7.40 ± 0.05, 14.85 ± 0.05, and 6.53 ± 0.05 mg g^-1 fluoride, respectively, even after the third regeneration cycle. Additionally, the hydrogel beads are effective in the removal of arsenate (≤90 ± 0.02%) and chromate ions (≤96 ± 0.02%) from 100 ± 0.20 mg L^-1 solution in batch adsorption studies. Therefore, the hydrogel beads could be used as potent filters for the removal of fluoride, chromate, and arsenate ions from water.

Perchlorate occurrence in foodstuffs and water: Analytical methods and techniques for removal from water - A review

Perchlorate (ClO₄^-), a type of contaminant with high diffusivity and durability, has been widely detected in water and foodstuffs, arousing a global concern. It can interfere with normal function of the human thyroid gland, affecting human health. Therefore, determination of perchlorate in water and foodstuffs, and removal from water are important. This review focuses on the occurrence of perchlorate, mainly in water and foodstuffs, and provides an overview of analytical methods for determination of perchlorate over the last two decades. In addition, merits and drawbacks of the various methods have been considered. This review also highlights the most commonly used approaches for removal of perchlorate from water. Finally, current trends and future perspectives in determination of perchlorate and removal from water are proposed. This review provided a comprehensive understanding of perchlorate occurrence and its removal from water, and had practical significance in reducing the harm of perchlorate to human.

Electro-assisted autohydrogenotrophic reduction of perchlorate and microbial community in a dual-chamber biofilm-electrode reactor

The electro-assisted autohydrogenotrophic reduction of perchlorate (ClO₄^-) was investigated in a dual-chamber biofilm-electrode reactor (BER), in which the microbial community was inoculated from natural sediments. To avoid the effect of extreme pH and direct electron transfer on perchlorate reduction, a novel cathode configuration was designed. The pH of the cathode compartment was successfully controlled in the range of 7.2-8.4 during whole experiment. The effective biological autohydrogenotrophic reduction of perchlorate was achieved using hydrogen generated in-situ on the electrode surface, and the removal rate of 10 mg L^-1 perchlorate reached 98.16% at HRT of 48 h. The highest perchlorate removal flux reached to 1498.420 mg m^-2·d^-1 with a 0.410 kW·h g-perchlorate^-1 energy consumption. The microbial community evolution in the BER was determined by high-throughput sequencing and the results indicated that the Firmicutes and Bacteroidetes were dominant at phylum level when perchlorate concentration was 10 mg L^-1 or lower. And the Proteobacteria became ascendant at the perchlorate concentration of 20 mg L^-1. The functional populations for perchlorate reduction were successfully enriched including Nitrosomonas (30%), Thermomonas (9%), Comamonas (8%) and Hydrogenophaga (3%). Meanwhile, the proportion of functional population in biofilm linked to perchlorate concentration. With the increase of influent perchlorate concentration, the perchlorate-reducing bacteria (PRB) were enriched successfully and became ascendant.

Treatment of malachite green dye containing solution using bio-degradable Sodium alginate/NaOH treated activated sugarcane baggsse charcoal beads: Batch, optimization using response surface methodology and continuous fixed bed column study

In this study, carbonized material was produced using sodium hydroxide treated Sugar cane bagasse (SB), and synthesized materials ware used to prepare Sodium Alginate/SBAC composite beads which were further used as an adsorbent to remove malachite green dye (MG) present in water. Physiochemical characteristics of composite beads were analyzed using FTIR, SEM, TGA, and BET. Adsorption equilibrium data showed excellent fit to the Freundlich model (R² = 0.994) than to the Langmuir model (R² = 0.925). Adsorption kinetics study indicated that the MG removal process would be better described by the pseudo-second-order kinetic model. The thermodynamic study suggested the spontaneous and endothermic nature of MG adsorption. By using response surface methodology, the optimum conditions for MG adsorption on composite beads were found to be 115.43 min, 0.3 g/L and pH 8 for contact time, adsorbent mass, and pH respectively and MG adsorption efficiency was 97.88%. The fixed-bed column data were evaluated using several kinetic models and among them, Thomas model showed the best agreement with investigation results. These results revealed that synthesized composite beads have a high affinity toward MG and it could be reasonable, eco-friendly adsorbent for dye removal from wastewater.

Adsorption of lead (Ⅱ) from aqueous solution by modified Auricularia matrix waste: A fixed-bed column study

In this study, Auricularia Matrix Waste (AMW) was modified by sodium hydroxide and immobilized into granular adsorbent with sodium alginate to remove lead ions from aqueous solution through a fixed-bed column. The results of Scanning Electron Microscope-Energy Dispersive X-ray (SEM-EDX) and Fourier Transform Infrared Spectroscopy (FTIR) illuminated that immobilization greatly changed the structure, elements, polarity and functional groups of the adsorbent. Amino, hydroxyl, carboxyl groups on the adsorbent actively participated lead(II) adsorption and cation exchange also played an important role in adsorption process. The effects of bed length, flow rate and lead ions concentration determined the breakthrough characteristics and remarkably impacted lead(II) adsorption. The maximum adsorption capacity of lead(II) was 151.7 mg/g, when the influent bed, bed height and initial concentration were 15 mL/min, 25 mL/min and 150 mg/L, respectively. Thomas model was more suitable than the Bohart-Adams model to describe the performance of lead(II) adsorption onto IMAMW.

Bio-reduction of free and laden perchlorate by the pure and mixed perchlorate reducing bacteria: Considering the pH and coexisting nitrate

Pure bacteria cell (Azospira sp. KJ) and mixed perchlorate reducing bacteria (MPRB) were employed for decomposing the free perchlorate in water as well as the laden perchlorate on surface of quaternary ammonium wheat residuals (QAWR). Results indicated that perchlorate was decomposed by the Azospira sp. KJ prior to nitrate while MPRB was just the reverse. Bio-reduction of laden perchlorate by Azospira sp. KJ was optimal at pH 8.0. In contrast, bio-reduction of laden perchlorate by MPRB was optimal at pH 7.0. Generally, the rate of perchlorate reduction was controlled by the enzyme activity of PRB. In addition, perchlorate recovery (26.0 mg/g) onto bio-regenerated QAWR by MPRB was observed with a small decrease as compared with that (31.1 mg/g) by Azospira sp. KJ at first 48 h. Basically, this study is expected to offer some different ideas on bio-regeneration of perchlorate-saturated adsorbents using biological process, which may provide the economically alternative to conventional methods.

Capture of perchlorate by a surface-modified bio-sorbent and its bio-regeneration properties: Adsorption, computations and biofouling

A magnetic amine-crosslinked reed (MACR) was synthesized by an insitu precipitation method and used for perchlorate uptake. The morphological properties of clean MACR, perchlorate-saturated MACR and bio-regenerated MACR samples were determined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. The adsorption capacities of perchlorate by clean and bio-regenerated MACRs were determined. The density functional theory (DFT) method was employed to evaluate the binding free energies between various anions and ammonium/hydroxy groups. The maximum adsorption (Q_max) of perchlorate by MACR was calculated to be 195.5-232.8 mg/g at 30-50 °C. The theoretical computation of adsorption-free energies indicated that ammonium groups were dominant in the process of perchlorate adsorption; other anions, such as [H₂PO₄]^-, [NO₃]^- and [SO₄]^2-, showed relatively higher binding free energies than [ClO₄]^-, which corresponded to the results of competitive adsorption. The spent MACR was then bio-regenerated in a sealed 250-ml conical flask with perchlorate-reducing bacteria (30 °C, 160 rpm) and reached 81.4% of recovery within 3 days. Some hydrophobic macromolecules of extracellular polymeric substances (EPS) might have attached to the surface of MACR, which was validated by the zeta potential, SEM and excitation emission matrix (EEM) fluorescence spectroscopy results.

Environmental applications of chitosan and cellulosic biopolymers: A comprehensive outlook

Biopolymers are substances naturally produced by living organisms and are hence considered to be eco-friendly and sustainable. Chitosan and cellulose are of specific significance owing to their abundant availability, ease of modification, and application potential. On the environmental front, their coagulating and flocculating effects have helped in wastewater clarification, while minimizing the dependability on synthetic polyelectrolytes. Biopolymer based hydrogels and nanocomposite films have functioned as effective biosorbents in removing an array of organic and inorganic pollutants, including xenobiotics, from wastewater. Specifically, they have been vastly harnessed for heavy metal and dye adsorption. They have also played a pivotal part in other environmental applications including anti-desertification, natural bio-sealants for preventing concrete leaks and proton conducting membranes in electrochemical devices. Such recent research on the environmental applications of biopolymers has been comprehensively analysed, thus providing a fresh insight into the future prospects of research in this domain.

The rapid adsorption-microbial reduction of perchlorate from aqueous solution by novel amine-crosslinked magnetic biopolymer resin

The aim of this work was to study the adsorption characters of resin, microbial reduction of perchlorate and combined process of perchlorate removal in aqueous solution. Study demonstrated the adsorption equilibrium was achieved in 120min, which based on ion exchange reaction. Dissolved perchlorate (100mg/L) can be completely removed by acclimated anaerobic sludge in 15h, and the concentrated perchlorate (∼200mg/g) on the surface of resin would be effectively microbial reduced after 3days. Neutral environment (pH=7.4), higher biomass and additional electron donor can apparently improve the biological reduction efficiency of concentrated perchlorate. Addition of many co-anions showed the competition adsorption towards perchlorate, especially in the presence of NO₃^-. This study provides an effective method for perchlorate reduction by the adsorption-microbial process.

Anion exchange dynamics in the capture of perchlorate by a cationic Ag-based MOF

We report a detailed study of the host-guest interaction for a cationic metal-organic framework that can reversibly capture perchlorate. The structural transformation and flexibility of silver 4,4'-bipyridine nitrate (SBN) upon formation of silver 4,4'-bipyridine perchlorate (SBP) was evaluated by monitoring the anion exchange dynamics using a combination of powder X-ray diffraction (PXRD) with multinuclear 13C, 15N and 109Ag solid-state NMR spectra at different time intervals of the anion exchange. The structural transformation from SBN to SBP is complete within 70 minutes and was determined to take place by a solvent-mediated process. This pathway is confirmed by the morphological changes of the two crystalline materials observed by SEM. This key understanding may lead to application of this material towards perchlorate capture.

Reversible, Selective Trapping of Perchlorate from Water in Record Capacity by a Cationic Metal-Organic Framework

We report the capture of ppm-level aqueous perchlorate in record capacity and kinetics via the complete anion exchange of a cationic metal-organic framework. Ambient conditions were used for both the synthesis of silver 4,4'-bipyridine nitrate (SBN) and the exchange, forming silver 4,4'-bipyridine perchlorate (SBP). The exchange was complete within 90 min, and the capacity was 354 mg/g, representing 99% removal. These values are greater than current anion exchangers such as the resins Amberlite IRA-400 (249 mg/g), Purolite A530E (104 mg/g), and layered double hydroxides (28 mg/g). Moreover, unlike resins and layered double hydroxides, SBN is fully reusable and displays 96% regeneration to SBN in nitrate solution, with new crystal formation allowing the indefinite cycling for perchlorate. We show seven cycles as proof of concept. Perchlorate contamination of water represents a serious health threat because it is a thyroid endocrine disruptor. This noncomplexing anionic pollutant is significantly mobile and environmentally persistent. Removal of other anionic pollutants from water such as chromate, pertechnetate, or arsenate may be possible by this methodology.

Continuous Fixed-Bed Column Study and Adsorption Modeling: Removal of Lead Ion from Aqueous Solution by Charcoal Originated from Chemical Carbonization of Rubber Wood Sawdust

The efficiency of chemically carbonized rubber wood sawdust for the removal of lead ion from the aqueous stream was investigated by column process. Chemically carbonized rubber wood sawdust was prepared by treating the sawdust with H2SO4and HNO3. Maximum removal of lead ion in column process was found as 38.56 mg/g. The effects of operating parameters such as flow rate, bed depth, concentration, and pH were studied in column mode. Experimental data confirmed that the adsorption capacity increased with the increasing inlet concentration and bed depth and decreased with increasing flow rate. Thomas, Yoon-Nelson, and Adams-Bohart models were used to analyze the column experimental data and the relationship between operating parameters. Chemically carbonized rubber wood sawdust was characterized by using Fourier transform infrared spectroscopy. Scanning electron microscope was also utilized for morphological analysis of the adsorbent. Furthermore X-ray fluorescence spectrum analysis and energy dispersive X-ray spectroscopy were also used for the confirmation of lead adsorption process.