In situ synthesis of new magnetite chitosan/carrageenan nanocomposites by electrostatic interactions for protein delivery applications

Electrospun fiber mats based on chitosan-carrageenan containing Malva sylvestris anthocyanins: Physic-mechanical, thermal, and barrier properties along with application as intelligent food packaging materials

This study aimed to encapsulate Malva sylvestris extract (MSE) into chitosan-carrageenan (CH-KC) fibers using the electrospinning technique and monitor the freshness of silver carp fillets during the refrigerated storage conditions for 8 days. The CH-KC + MSE 4 % fiber mats were red at pH values lower than 3, purple at pH 4-6, dark blue at pH 7, green at pH 8-10, and brown at pH 11-12. The tensile strength, elongation at break, water vapor permeability, oxygen transmission rate, moisture content, and water solubility of fabricated fiber mats were 7.71-11.02 MPa, 13.12 %-30.00 %, 7.35-20.01 × 10-4 g mm/m2 h Pa, 3.81-8.23 cm3/m2 h, 15.74 %-27.34 %, and 3.90 %-7.56 %, respectively. Regarding the potential application of a fabricated indicator for freshness monitoring of silver carp fillets, total viable count, psychrotrophic bacterial count, pH, and total volatile basic nitrogen reached 8.91 log CFU/g, 8.03 log CFU/g, 8.10, and 40.18 mg N/100 g at the end of the study, respectively. Meanwhile, the CH-KC + MSE 4 % fiber mat color changed from white to green. These findings suggest that CH-KC + MSE 4 % fiber mats can be further utilized in the food industry to control the freshness of refrigerated silver carp fillets.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Physicochemical properties of electrostatically crosslinked carrageenan/chitosan hydrogels and carrageenan/chitosan/Laponite nanocomposite hydrogels

In this work physical carrageenan/chitosan (Car/Chit) hydrogels are prepared by electrostatic complexation between the two oppositely charged polysaccharides. The hydrogels have storage moduli in the order of 5-10 kPa and swelling ratios in the order of 5000-6000 %. At conditions where both polysaccharides are highly charged (pH 5) the swelling ratios are lower than the ones at conditions of lower dissociation i.e., at pH 2 and 7 and the opposite trend is found for the storage modulus. Chit appears to act as a crosslinker for Car as increasing its concentration the swelling ratio decreases and the moduli increase. The hydrogels can incorporate the nanoclay Laponite (Lap) and form hybrid nanocomposites where the intercalation by the two biopolymers leads to exfoliation of the clay nanoplatelets in the presence of both Car and Chit. The composite hydrogels retain the mechanical properties of the Car/Chit hydrogels at the studied pH range (pH 2 to pH 7). This shows the prepared hydrogels can be potentially used as multifunctional biomaterials for drug delivery, tissue engineering and bone regeneration applications.

One-Step Construct Responsive Lignin/Polysaccharide/Fe Nano Loading System Driven by Digestive Enzymes of Lepidopteran for Precise Delivery of Pesticides

A strategy that relies on the differences in feeding behavior between pests and natural enemies to deliver insecticides precisely was proposed. After proving that the digestive enzymes in Lepidopteran pests can act as triggers for lignin-based controlled-release carriers, a novel multiple-enzyme-responsive lignin/polysaccharide/Fe nanocarrier was constructed by combining the electrostatic self-assembly and chelation and loaded with lambda-cyhalothrin (LC) to form a nanocapsule suspension loading system. The nanocapsules were LC@sodium lignosulfonate/chitosan/Fe (LC@SL/CS/Fe) and LC@sodium lignosulfonate/alkyl polyglycoside quaternary ammonium salt/Fe (LC@SL/APQAS/Fe). LC@SL/APQAS/Fe was more stable than LC@SL/CS/Fe because it adsorbs more Fe³⁺, and the half-lives of LC in LC@SL/APQAS/Fe under UV irradiation were prolonged at 4.02- and 6.03-folds than those of LC@SL/CS/Fe and LC emulsifiable concentrate (LC EC), respectively. Both LC@SL/APQAS/Fe and LC@SL/CS/Fe have responsive release functions to laccase and cellulase, and the release rate of the former was slower. The insecticidal activity of LC@SL/APQAS/Fe against Agrotis ipsilonis was similar to those of LC@SL/CS/Fe and LC EC, while the toxicity of LC@SL/APQAS/Fe to the natural enemy was 2-3 times less than those of LC@SL/CS/Fe and LC EC. Meanwhile, the organic solvent component in the nanocapsule suspension was 94% less than that in the EC preparation. Therefore, the nano loading system based on SL/APQAS/Fe is a promising nanoplatform with the advantages of high efficiency, low toxicity, and environmental friendliness.

Kappa-carrageenan/chitosan/gelatin scaffolds enriched with potassium chloride for bone tissue engineering

Kappa-carrageenan is a biocompatible natural polysaccharide able to form hydrogels for tissue regeneration. In bone tissue engineering, achieving a bioactive microenvironment with appropriate mechanical properties in polysaccharide-based scaffolds remains a challenge. This study aims to fabricate 3D scaffolds comprising kappa-carrageenan, chitosan and gelatin, crosslinked with KCl, and evaluate their mechanical and biological properties for bone tissue engineering. The produced scaffolds include kappa-carrageenan/chitosan (KC), kappa-carrageenan/chitosan/gelatin (KCG), kappa-carrageenan/chitosan/gelatin enriched with KCl (KCG-KCl), and chitosan/gelatin (CG). All scaffolds present degradation rates ranging from 30% weight loss on day 21, pore size distribution in the range of 100-160 μm and porosity above 80%. The Young modulus values range from 9 to 256 kPa, with the KCl-containing KCG scaffolds demonstrating the highest values, validating the role of KCl in the coil to helix transition of kappa-carrageenan leading to firmer structures. In vitro biological evaluation indicates that pre-osteoblasts proliferate significantly from day 3 up to day 14 on all scaffold compositions. The alkaline phosphatase activity shows a significant increase up to day 14. The calcium production displays a constant increase from day 14 up to day 28, proving that all scaffold compositions support the osteogenic differentiation potential.

Toxicity Assessment and Control of Early Blight and Stem Rot of Solanum tuberosum L. by Mancozeb-Loaded Chitosan–Gum Acacia Nanocomposites

Biopolymers such as chitosan and gum acacia are used for nanotechnological applications due to their biosafety and ecofriendly nature. The commercial fungicide mancozeb (M) was loaded into chitosan–gum acacia (CSGA) polymers to form nanocomposite (NC) CSGA-M (mancozeb-loaded) measuring 363.6 nm via the ionic gelation and polyelectrolyte complexation method. The physico-chemical study of nano CSGA-M was accomplished using dynamic light scattering (DLS), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Nano CSGA-M-1.0 (containing 1.0 mg/mL mancozeb) at 1.5 ppm demonstrated a maximum inhibition (83.8 ± 0.7%) against Alternaria solani, while Sclerotinia sclerotiorum exhibited a 100% inhibition at 1.0 and 1.5 ppm through the mycelium inhibition method. Commercial mancozeb showed an inhibition of 84.6 ± 0% and 100%, respectively, for both fungi. In pot house conditions, NCs were found to exhibit good antimicrobial activity. Disease control efficiency (DCE, in %) in pathogen-treated plants for CSGA-M-1.0 was 64.6 ± 5.0 and 60.2 ± 1.4% against early blight and stem rot diseases, respectively. NCs showed lower cytotoxicity than commercial mancozeb at the given concentration. In conclusion, both in vitro and in vivo antifungal efficacy for nano CSGA-M was found to be quite comparable but less toxic than mancozeb to Vero cell lines; thus, in the future, this formulation may be used for sustainable agriculture.

Assessment of Antifungal Efficacy and Release Behavior of Fungicide-Loaded Chitosan-Carrageenan Nanoparticles against Phytopathogenic Fungi

Biopolymeric Chitosan-Carrageenan nanocomposites 66.6-231.82 nm in size containing the chemical fungicide mancozeb (nano CSCRG-M) were synthesized following a green chemistry approach. The physicochemical study of nanoparticles (NPs) was accomplished using a particle size analyzer, SEM and FTIR. TEM exhibited clover leaf-shaped nanoparticles (248.23 nm) with mancozeb on the inside and entrapped outside. Differential scanning calorimetry and TGA thermogravimetry exhibited the thermal behaviour of the nanoform. Nano CSCRG-1.5 at 1.5 ppm exhibited 83.1% inhibition against Alternaria solani in an in vitro study and performed as well as mancozeb (84.6%). Complete inhibition was exhibited in Sclerotinia sclerotiorum at 1.0 and 1.5 ppm with the nanoformulation. The in vivo disease control efficacy of mancozeb-loaded nanoparticles against A. solani in pathogenized plants was found to be relatively higher (79.4 ± 1.7) than that of commercial fungicide (76 ± 1.1%) in pot conditions. Nanomancozeb showed superior efficacy for plant growth parameters, such as germination percentage, root-shoot ratio and dry biomass. The nanoformulation showed higher cell viability compared to mancozeb in Vero cell cultures at 0.25 and 0.50 mg/mL in the resazurin assay. CSCRG-0.5 showed slow-release behavior up to 10 h. Thus, these green nano-based approaches may help combat soil and water pollution caused by harmful chemical pesticides.

Design and fabrication of hybrid triple-responsive κ-carrageenan-based nanospheres for controlled drug delivery

In the last two decades, the utilization of magnetic nanospheres in intelligent polymeric structures have received increased attention of researchers in numerous biomedical applications. Here, hybrid nanostructured triple-responsive magnetic nanospheres (κ-Car-g-P(AA/DMA)@Fe₃O₄) containing inorganic iron oxide core (Fe₃O₄) and organic graft copolymeric shell based on κ-carrageenan (κ-Car) and poly(acrylic acid/dimethylaminoethyl methacrylate) (P(AA/DMA)) were synthesized by microwave induced co-precipitation technique. The structure, size, surface morphology, magnetic property and stability of synthesized κ-Car-g-P(AA/DMA)@Fe₃O₄ magnetic nanospheres were characterized using FTIR, UV, XRD, TEM, Zeta-sizer, and VSM. κ-Car-g-P(AA/DMA)@Fe₃O₄ nanospheres were loaded with 5-Fluorouracil (5-FU) as an antineoplastic drug, and their 5-FU release behavior was explored in diverse graft yields, pH values, temperatures and in the existence of an alternating magnetic field. The κ-Car-g-P(AA/DMA)@Fe₃O₄ nanospheres demonstrated pH-, thermo-, and magnetic field-responsive 5-FU release with good biocompatibility and excellent anticancer activity. In addition, 5-FU release under 50 mT magnetic field reached to 100% within 4 h. This work exhibits that hybrid nanospheres have a triple stimuli-responsive influence, which is of principal importance for the future design and application of multi-functional responsive platforms to develop externally stimulated release of active agents and their healthcare capability.

A Novel Method for Preparation of Carrageenan/Fish Scale Collagen/Allopurinol Biocomposite Film

Biopolymers such as carrageenan or collagen can be used as carriers for loading a drug to enhance a drug’s bioavailability. In this work, allopurinol was loaded on a carrageenan/collagen blend and the carrageenan/collagen/allopurinol (CCA) biocomposite films were prepared using the ionic gelation method combined with the 3D printing method using carrageenan/collagen/allopurinol gel as a 3D printing ink material. The advantages of the 3D printing method are the ease in shaping the design of films and the ease in controlling the thickness of films. The results of infrared (IR) spectroscopy and field emission scanning electron microscopy (FESEM) analyses showed that the CCA biocomposite films have a regular structure, and the functional groups of components in the biocomposites can interact with each other. After 30 minutes of immersion in distilled water and pH buffer solution, the biocomposite films swelled and disintegrated. The carrageenan/collagen blend can control the release of allopurinol in simulated body fluids. In addition, the drug release kinetic models reflecting the release process of allopurinol from CCA biocomposite films in simulated body fluids have also been calculated.

Rational Design of Nanocarriers for Intracellular Protein Delivery

Protein/antibody therapeutics have exhibited the advantages of high specificity and activity even at an extremely low concentration compared to small molecule drugs. However, they are accompanied by unfavorable physicochemical properties such as fragile tertiary structure, large molecular size, and poor penetration of the membrane, and thus the clinical use of protein drugs is hindered by inefficient delivery of proteins into the host cells. To overcome the challenges associated with protein therapeutics and enhance their biopharmaceutical applications, various protein-loaded nanocarriers with desired functions, such as lipid nanocapsules, polymeric nanoparticles, inorganic nanoparticles, and peptides, are developed. In this review, the different strategies for intracellular delivery of proteins are comprehensively summarized. Their designed routes, mechanisms of action, and potential therapeutics in live cells or in vivo are discussed in detail. Furthermore, the perspective on the new generation of delivery systems toward the emerging area of protein-based therapeutics is presented as well.

Immobilization of Lipase A from Candida antarctica onto Chitosan-Coated Magnetic Nanoparticles

In this communication, lipase A from Candida antarctica (CALA) was immobilized by covalent bonding on magnetic nanoparticles coated with chitosan and activated with glutaraldehyde, labelled CALA-MNP, (immobilization parameters: 84.1% ± 1.0 for immobilization yield and 208.0 ± 3.0 U/g ± 1.1 for derivative activity). CALA-MNP biocatalyst was characterized by X-ray Powder Diffraction (XRPD), Fourier Transform Infrared (FTIR) spectroscopy, Thermogravimetry (TG) and Scanning Electron Microscope (SEM), proving the incorporation of magnetite and the immobilization of CALA in the chitosan matrix. Besides, the immobilized biocatalyst showed a half-life 8-11 times higher than that of the soluble enzyme at pH 5-9. CALA showed the highest activity at pH 7, while CALA-MNP presented the highest activity at pH 10. The immobilized enzyme was more active than the free enzyme at all studied pH values, except pH 7.

Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing

Carrageenan is a class of naturally occurring sulphated polysaccharides, which is currently a promising candidate in tissue engineering and regenerative medicine as it resemblances native glycosaminoglycans. From pharmaceutical drug formulations to tissue engineered scaffolds, carrageenan has broad range of applications. Here we provide an overview of developing various forms of carrageenan based hydrogels. We focus on how these fabrication processes has an effect on physiochemical properties of the hydrogel. We outline the application of these hydrogels not only pertaining to sustained drug release but also their application in bone and cartilage tissue engineering as well as in wound healing and antimicrobial formulations. Administration of these hydrogels through various routes for drug delivery applications has been critically reviewed. Finally, we conclude by summarizing the current and future outlook that promotes the seaweed-derived polysaccharide as versatile, promising biomaterial for a variety of bioengineering applications.

Engineering pectin-based hollow nanocapsules for delivery of anticancer drug

Multifunctional capsules have great applications in biomedical fields. In this study, novel polysaccharide-based nanocapsules were prepared via a layer-by-layer technique using silica as the templates. The shell was constructed based on the electrostatic interactions between pectin and chitosan. The pectin-chitosan nanocapsules ((Pec/Cs)₃Pec) could keep good colloidal stability within 96h in PBS solution and 48h in BSA solution. Meanwhile, the nanocapsules exhibited a high drug loading and pH-sensitive release property for doxorubicin hydrochloride. Moreover, (Pec/Cs)₃Pec nanocapsules had no cytotoxicity to both human hepatocellular carcinoma cells (HepG2 cells) and mouse fibroblast cells (L929 cells). More importantly, (Pec/Cs)₃Pec nanocapsules could be more easily uptaken by HepG2 cells when compared with L929 cells. In vitro anticancer activity tests indicated the carriers could effectively kill HepG2 cells. Overall, (Pec/Cs)₃Pec nanocapsules have great potential as a novel anticancer drug carrier as a result of their pH-sensitivity, good colloidal stability and anticancer activity.

Carrageenan Based Bionanocomposites as Drug Delivery Tool with Special Emphasis on the Influence of Ferromagnetic Nanoparticles

Over the past few years, considerable attention has been focused on carrageenan based bionanocomposites due to their multifaceted properties like biodegradability, biocompatibility, and nontoxicity. Moreover, these composites can be tailored according to the desired purpose by using different nanofillers. The role of ferromagnetic nanoparticles in drug delivery is also discussed here in detail. Moreover, this article also presents a short review of recent research on the different types of the carrageenan based bionanocomposites and applications.

Bioactive Nanocomposites for Tissue Repair and Regeneration: A Review

This review presents scientific findings concerning the use of bioactive nanocomposites in the field of tissue repair and regeneration. Bioactivity is the ability of a material to incite a specific biological reaction, usually at the boundary of the material. Nanocomposites have been shown to be ideal bioactive materials due the many biological interfaces and structures operating at the nanoscale. This has resulted in many researchers investigating nanocomposites for use in bioapplications. Nanocomposites encompass a number of different structures, incorporating organic-inorganic, inorganic-inorganic and bioinorganic nanomaterials and based upon ceramic, metallic or polymeric materials. This enables a wide range of properties to be incorporated into nanocomposite materials, such as magnetic properties, MR imaging contrast or drug delivery, and even a combination of these properties. Much of the classical research was focused on bone regeneration, however, recent advances have enabled further use in soft tissue body sites too. Despite recent technological advances, more research is needed to further understand the long-term biocompatibility impact of the use of nanoparticles within the human body.