1
|
Alizadeh S, Ameri Z, Daemi H, Pezeshki-Modaress M. Sulfated polysaccharide as biomimetic biopolymers for tissue engineering scaffolds fabrication: Challenges and opportunities. Carbohydr Polym 2024; 336:122124. [PMID: 38670755 DOI: 10.1016/j.carbpol.2024.122124] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 03/31/2024] [Accepted: 04/01/2024] [Indexed: 04/28/2024]
Abstract
Sulfated polysaccharides play important roles in tissue engineering applications because of their high growth factor preservation ability and their native-like biological features. There are different sulfated polysaccharides based on different repeating units in the carbohydrate backbone, the position of the sulfate group, and the sulfation degree of the polysaccharide. These led to various sulfated polymers with different negative charge densities and resultant structure-property relationships. Since numerous reports are presented related to sulfated polysaccharide applications in tissue engineering, it is crucial to review the role of effective physicochemical and biological parameters in their usage; as well as their structure-property relationships. Within this review, we focused on the effect of naturally occurring and synthetic sulfated polysaccharides in tissue engineering applications reported in the last years, highlighting the challenges of the scaffold fabrication process, the position, and the degree of sulfate on biomedical activity. Additionally, we discussed their use in numerous in vitro and in vivo model systems.
Collapse
Affiliation(s)
- Sanaz Alizadeh
- Cellular and Molecular Research Center, Iran University of Medical Sciences, Tehran, Iran; Department of Tissue Engineering & Regenerative Medicine, Faculty of Advanced Technologies in Medicine, Iran University of Medical Sciences, Tehran, Iran
| | - Zahra Ameri
- Cellular and Molecular Research Center, Iran University of Medical Sciences, Tehran, Iran; Department of Tissue Engineering & Regenerative Medicine, Faculty of Advanced Technologies in Medicine, Iran University of Medical Sciences, Tehran, Iran; Stem Cells and Regenerative Medicine Innovation Center, Kerman University of Medical Sciences, Kerman, Iran
| | - Hamed Daemi
- Department of Cell Engineering, Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran, Iran
| | - Mohamad Pezeshki-Modaress
- Burn Research Center, Iran University of Medical Sciences, Tehran, Iran; Department of Plastic and Reconstructive surgery, Hazrat Fatemeh Hospital, School of Medicine, Iran University of Medical Sciences, Tehran, Iran; Stem Cell and Regenerative Medicine Research Center, Iran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
2
|
Nath PC, Sharma R, Mahapatra U, Mohanta YK, Rustagi S, Sharma M, Mahajan S, Nayak PK, Sridhar K. Sustainable production of cellulosic biopolymers for enhanced smart food packaging: An up-to-date review. Int J Biol Macromol 2024; 273:133090. [PMID: 38878920 DOI: 10.1016/j.ijbiomac.2024.133090] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2024] [Revised: 06/01/2024] [Accepted: 06/09/2024] [Indexed: 06/20/2024]
Abstract
Biodegradable and sustainable food packaging (FP) materials have gained immense global importance to reduce plastic pollution and environmental impact. Therefore, this review focused on the recent advances in biopolymers based on cellulose derivatives for FP applications. Cellulose, an abundant and renewable biopolymer, and its various derivatives, namely cellulose acetate, cellulose sulphate, nanocellulose, carboxymethyl cellulose, and methylcellulose, are explored as promising substitutes for conventional plastic in FP. These reviews focused on the production, modification processes, and properties of cellulose derivatives and highlighted their potential for their application in FP. Finally, we reviewed the effects of incorporating cellulose derivatives into film in various aspects of packaging properties, including barrier, mechanical, thermal, preservation aspects, antimicrobial, and antioxidant properties. Overall, the findings suggest that cellulose derivatives have the potential to replace conventional plastics in food packaging applications. This can contribute to reducing plastic pollution and lessening the environmental impact of food packaging materials. The review likely provides insights into the current state of research and development in this field and underscores the significance of sustainable food packaging solutions.
Collapse
Affiliation(s)
- Pinku Chandra Nath
- Department of Bio Engineering, National Institute of Technology Agartala, Jirania 799046, India; Nano-biotechnology and Translational Knowledge Laboratory, Department of Applied Biology, University of Science and Technology Meghalaya, Baridua 793101, India
| | - Ramesh Sharma
- Department of Bio Engineering, National Institute of Technology Agartala, Jirania 799046, India
| | - Uttara Mahapatra
- Department of Chemical Engineering, National Institute of Technology Agartala, Jirania 799046, India
| | - Yugal Kishore Mohanta
- Nano-biotechnology and Translational Knowledge Laboratory, Department of Applied Biology, University of Science and Technology Meghalaya, Baridua 793101, India; Centre for Herbal Pharmacology and Environmental Sustainability, Chettinad Hospital and Research Institute, Chettinad Academy of Research and Education, Kelambakkam-603103, Tamil Nadu, India
| | - Sarvesh Rustagi
- Department of Food Technology, Uttaranchal University, Dehradun 248007, India
| | - Minaxi Sharma
- Research Center for Life Science and Healthcare, Nottingham Ningbo China Beacons of Excellence Research and Innovation (CBI), University of Nottingham Ningbo China, Ningbo 315000, China
| | - Shikha Mahajan
- Department of Food and Nutrition, Punjab Agricultural University, Ludhiana 141004, India
| | - Prakash Kumar Nayak
- Department of Food Engineering and Technology, Central Institute of Technology Kokrajhar, Kokrajhar 783370, India.
| | - Kandi Sridhar
- Department of Food Technology, Karpagam Academy of Higher Education (Deemed to be University), Coimbatore 641021, India.
| |
Collapse
|
3
|
Jaouahar M, Ablouh EH, Hanani Z, Jaklič B, Spreitzer M, Semlali FZ, Ait Benhamou A, Samih Y, El Achaby M, Sehaqui H. Preparation and characterization of sulfated nanocellulose: From hydrogels to highly transparent films. Int J Biol Macromol 2024; 260:129464. [PMID: 38232892 DOI: 10.1016/j.ijbiomac.2024.129464] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2023] [Revised: 01/05/2024] [Accepted: 01/11/2024] [Indexed: 01/19/2024]
Abstract
This study focuses on the production of sulfated cellulose microfibers and nanocellulose hydrogels from native cellulose microfibers (CMF). The process involves using a combination of H2SO4 and urea, resulting in highly sulfated cellulose microfiber hydrogel (SC) with notable properties such as a sulfur content of 7.5 %, a degree of sulfation of 0.49, a surface charge content of 2.2 mmol. g-1, and a high yield of 81 %. The SC hydrogel can be easily fibrillated into sulfated nanocellulose hydrogel (S-NC) with elongated nanocellulose structures having an average diameter of 6.85 ± 3.11 nm, as determined using atomic force microscopy (AFM). X-ray photoelectron spectroscopy (XPS) analysis confirms the presence of sulfate groups on the surface of the nanocellulose material. Transparent films with good mechanical properties can be produced from both cellulose microfiber and nanocellulose hydrogels. The sulfate functionality gives the hydrogel attractive rheological properties and makes S-NC re-dispersible in water, which can be beneficial for various applications. This study demonstrates the potential of this process to address previous challenges related to nanocellulose materials production.
Collapse
Affiliation(s)
- Mohamed Jaouahar
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco.
| | - El-Houssaine Ablouh
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco.
| | - Zouhair Hanani
- Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia
| | - Blaž Jaklič
- Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Jamova cesta 39, 1000, Ljubljana, Slovenia
| | - Matjaz Spreitzer
- Advanced Materials Department, Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia
| | - Fatima-Zahra Semlali
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco
| | - Anass Ait Benhamou
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco
| | - Youssef Samih
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco
| | - Mounir El Achaby
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco
| | - Houssine Sehaqui
- Materials Science, Energy, and Nanoengineering (MSN) Department, Mohammed VI Polytechnic University (UM6P), Lot 660 - Hay Moulay Rachid, 43150 Benguerir, Morocco.
| |
Collapse
|
4
|
Sanjanwala D, Londhe V, Trivedi R, Bonde S, Sawarkar S, Kale V, Patravale V. Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review. Int J Biol Macromol 2024; 256:128488. [PMID: 38043653 DOI: 10.1016/j.ijbiomac.2023.128488] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Revised: 11/10/2023] [Accepted: 11/27/2023] [Indexed: 12/05/2023]
Abstract
Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.
Collapse
Affiliation(s)
- Dhruv Sanjanwala
- Department of Pharmaceutical Sciences and Technology, Institute of Chemical Technology, Nathalal Parekh Marg, Matunga (E), Mumbai 400019, Maharashtra, India; Department of Pharmaceutical Sciences, College of Pharmacy, 428 Church Street, University of Michigan, Ann Arbor, MI 48109, United States.
| | - Vaishali Londhe
- SVKM's NMIMS, Shobhaben Pratapbhai College of Pharmacy and Technology Management, V.L. Mehta Road, Vile Parle (W), Mumbai 400056, Maharashtra, India
| | - Rashmi Trivedi
- Smt. Kishoritai Bhoyar College of Pharmacy, Kamptee, Nagpur 441002, Maharashtra, India
| | - Smita Bonde
- SVKM's NMIMS, School of Pharmacy and Technology Management, Shirpur Campus, Maharashtra, India
| | - Sujata Sawarkar
- Department of Pharmaceutics, SVKM's Dr. Bhanuben Nanavati College of Pharmacy, University of Mumbai, Mumbai 400056, Maharashtra, India
| | - Vinita Kale
- Department of Pharmaceutics, Gurunanak College of Pharmacy, Kamptee Road, Nagpur 440026, Maharashtra, India
| | - Vandana Patravale
- Department of Pharmaceutical Sciences and Technology, Institute of Chemical Technology, Nathalal Parekh Marg, Matunga (E), Mumbai 400019, Maharashtra, India.
| |
Collapse
|
5
|
Zhang Y, Wang L, Wang ZD, Zhou Q, Zhou X, Zhou T, Guan YX, Liu X. Surface-anchored microbial enzyme-responsive solid lipid nanoparticles enabling colonic budesonide release for ulcerative colitis treatment. J Nanobiotechnology 2023; 21:145. [PMID: 37127609 PMCID: PMC10152766 DOI: 10.1186/s12951-023-01889-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/26/2022] [Accepted: 04/10/2023] [Indexed: 05/03/2023] Open
Abstract
Colon-targeted oral drug delivery systems (CDDSs) are desirable for the treatment of ulcerative colitis (UC), which is a disease with high relapse and remission rates associated with immune system inflammation and dysregulation localized within the lining of the large bowel. However, the success of current available approaches used for colon-targeted therapy is limited. Budesonide (BUD) is a corticosteroid drug, and its rectal and oral formulations are used to treat UC, but the inconvenience of rectal administration and the systemic toxicity of oral administration restrict its long-term use. In this study, we designed and prepared colon-targeted solid lipid nanoparticles (SLNs) encapsulating BUD to treat UC by oral administration. A negatively charged surfactant (NaCS-C12) was synthesized to anchor cellulase-responsive layers consisting of polyelectrolyte complexes (PECs) formed by negatively charged NaCS and cationic chitosan onto the SLNs. The release rate and colon-specific release behavior of BUD could be easily modified by regulating the number of coated layers. We found that the two-layer BUD-loaded SLNs (SLN-BUD-2L) with a nanoscale particle size and negative zeta potential showed the designed colon-specific drug release profile in response to localized high cellulase activity. In addition, SLN-BUD-2L exhibited excellent anti-inflammatory activity in a dextran sulfate sodium (DSS)-induced colitis mouse model, suggesting its potential anti-UC applications.
Collapse
Affiliation(s)
- Yipeng Zhang
- Department of Pharmacology and Department of Radiology of Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Hangzhou, 310016, China
- Zhejiang Key Laboratory of Smart Biomaterials, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China
- Innovation Center of Yangtze River Delta, Zhejiang University, Jiaxing, 314100, China
| | - Liying Wang
- Department of General Surgery, Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Hangzhou, 310016, China
| | - Zi-Dan Wang
- Zhejiang Key Laboratory of Smart Biomaterials, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Quan Zhou
- Department of Cell Biology, Zhejiang University School of Medicine, Hangzhou, 310058, China
- International Institutes of Medicine, The Fourth Affiliated Hospital of Zhejiang University School of Medicine, Yiwu, 322000, China
| | - Xuefei Zhou
- International Institutes of Medicine, The Fourth Affiliated Hospital of Zhejiang University School of Medicine, Yiwu, 322000, China
| | - Tianhua Zhou
- Department of Cell Biology, Zhejiang University School of Medicine, Hangzhou, 310058, China
- Cancer Center, Zhejiang University, Hangzhou, 310058, China
| | - Yi-Xin Guan
- Zhejiang Key Laboratory of Smart Biomaterials, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China
| | - Xiangrui Liu
- Department of Pharmacology and Department of Radiology of Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, Hangzhou, 310016, China.
- Zhejiang Key Laboratory of Smart Biomaterials, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, China.
- Innovation Center of Yangtze River Delta, Zhejiang University, Jiaxing, 314100, China.
- Cancer Center, Zhejiang University, Hangzhou, 310058, China.
| |
Collapse
|
6
|
Raees S, Ullah F, Javed F, Akil HM, Jadoon Khan M, Safdar M, Din IU, Alotaibi MA, Alharthi AI, Bakht MA, Ahmad A, Nassar AA. Classification, processing, and applications of bioink and 3D bioprinting: A detailed review. Int J Biol Macromol 2023; 232:123476. [PMID: 36731696 DOI: 10.1016/j.ijbiomac.2023.123476] [Citation(s) in RCA: 19] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/15/2022] [Revised: 01/12/2023] [Accepted: 01/25/2023] [Indexed: 02/02/2023]
Abstract
With the advancement in 3D bioprinting technology, cell culture methods can design 3D environments which are both, complex and physiologically relevant. The main component in 3D bioprinting, bioink, can be split into various categories depending on the criterion of categorization. Although the choice of bioink and bioprinting process will vary greatly depending on the application, general features such as material properties, biological interaction, gelation, and viscosity are always important to consider. The foundation of 3D bioprinting is the exact layer-by-layer implantation of biological elements, biochemicals, and living cells with the spatial control of the implantation of functional elements onto the biofabricated 3D structure. Three basic strategies underlie the 3D bioprinting process: autonomous self-assembly, micro tissue building blocks, and biomimicry or biomimetics. Tissue engineering can benefit from 3D bioprinting in many ways, but there are still numerous obstacles to overcome before functional tissues can be produced and used in clinical settings. A better comprehension of the physiological characteristics of bioink materials and a higher level of ability to reproduce the intricate biologically mimicked and physiologically relevant 3D structures would be a significant improvement for 3D bioprinting to overcome the limitations.
Collapse
Affiliation(s)
- Sania Raees
- Department of Biosciences, COMSATS University Islamabad, Park Road, 45520 Islamabad, Pakistan
| | - Faheem Ullah
- Department of Biological Sciences, National University of Medical Sciences, NUMS, Rawalpindi 46000, Pakistan; School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang, Malaysia
| | - Fatima Javed
- Department of Chemistry, Shaheed Benazir Bhutto Women University, Peshawar 25000, KPK, Pakistan
| | - Hazizan Md Akil
- School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang, Malaysia
| | - Muhammad Jadoon Khan
- Department of Biosciences, COMSATS University Islamabad, Park Road, 45520 Islamabad, Pakistan
| | - Muhammad Safdar
- Department of Pharmacy, Gomal University D. I Khan, KPK, Pakistan
| | - Israf Ud Din
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia.
| | - Mshari A Alotaibi
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia
| | - Abdulrahman I Alharthi
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia
| | - M Afroz Bakht
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia
| | - Akil Ahmad
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia
| | - Amal A Nassar
- Department of Chemistry, College of Science and Humanities, Prince Sattam bin Abdulaziz University, 16278 Al-Kharj, Saudi Arabia
| |
Collapse
|
7
|
Su X, Fang H, Yang H, Zou F, Li G, Wang L, Liao H, Guan W, Hu X. Cellulose sulfate lithium as a conductive binder for LiFePO4 cathode with long cycle life. Carbohydr Polym 2023; 313:120848. [PMID: 37182948 DOI: 10.1016/j.carbpol.2023.120848] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Revised: 03/14/2023] [Accepted: 03/22/2023] [Indexed: 03/30/2023]
Abstract
Polysaccharides can be potential binders for lithium-ion batteries due to their strong adhesion through numerous hydroxyl groups. As a novel waterborne lithiated polysaccharide derivative, cellulose sulfate lithium (CSL) is successfully synthesized and used as the binder for LiFePO4 (LFP) cathode. The chemical structure of CSL is verified by FTIR-ATR, XRD, C13-NMR, GPC, EA, ICP and TGA. Compared to LFP cathode using polyvinylidene difluoride binder, electrochemical measurements show that the LFP cathode using CSL (LFP-CSL) has lower polarization and better rate performance owing to higher lithium-ion conductivity of CSL. The result of morphological analysis indicates that CSL binder can maintain an integrated LFP cathode structure during hundreds of cycles. As a result, the LFP-CSL cathode exhibits a discharge capacity of 133.4 mAh g-1 and maintains remarkable cycle stability with retention of 93.1 % after 300 cycles at 1C. These findings provide novel insights into the rational design of the binders for the LFP cathode.
Collapse
|
8
|
Sulfation of Birch Wood Microcrystalline Cellulose with Sulfamic Acid Using Ion-Exchange Resins as Catalysts. Polymers (Basel) 2023; 15:polym15051116. [PMID: 36904360 PMCID: PMC10007473 DOI: 10.3390/polym15051116] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2023] [Revised: 02/17/2023] [Accepted: 02/20/2023] [Indexed: 02/25/2023] Open
Abstract
Cellulose sulfates are important biologically active substances with a wide range of useful properties. The development of new methods for the production of cellulose sulfates is an urgent task. In this work, we investigated ion-exchange resins as catalysts for the sulfation of cellulose with sulfamic acid. It has been shown that water-insoluble sulfated reaction products are formed in high yield in the presence of anion exchangers, while water-soluble products are formed in the presence of cation exchangers. The most effective catalyst is Amberlite IR 120. According to gel permeation chromatography, it was shown that the samples sulfated in the presence of the catalysts KU-2-8, Purolit s390 plus, and AN-31 SO42- underwent the greatest degradation. The molecular weight destribution profiles of these samples are noticeably shifted to the left towards low-molecular-weight compounds with an increase in fractions in the regions Mw ~2.100 g/mol and ~3.500 g/mol, indicating the growth of microcrystalline cellulose depolymerization products. The introduction of a sulfate group into the cellulose molecule is confirmed using FTIR spectroscopy by the appearance of absorption bands at 1245-1252 cm-1 and 800-809 cm-1, which correspond to the vibrations of the sulfate group. According to X-ray diffraction data, amorphization of the crystalline structure of cellulose is observed during sulfation. Thermal analysis has shown that with an increase in the content of sulfate groups in cellulose derivatives, thermal stability decreases.
Collapse
|
9
|
Novel Features of Cellulose-Based Films as Sustainable Alternatives for Food Packaging. Polymers (Basel) 2022; 14:polym14224968. [PMID: 36433095 PMCID: PMC9699531 DOI: 10.3390/polym14224968] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 10/31/2022] [Accepted: 11/07/2022] [Indexed: 11/18/2022] Open
Abstract
Packaging plays an important role in food quality and safety, especially regarding waste and spoilage reduction. The main drawback is that the packaging industry is among the ones that is highly dependent on plastic usage. New alternatives to conventional plastic packaging such as biopolymers-based type are mandatory. Examples are cellulose films and its derivatives. These are among the most used options in the food packaging due to their unique characteristics, such as biocompatibility, environmental sustainability, low price, mechanical properties, and biodegradability. Emerging concepts such as active and intelligent packaging provides new solutions for an extending shelf-life, and it fights some limitations of cellulose films and improves the properties of the packaging. This article reviews the available cellulose polymers and derivatives that are used as sustainable alternatives for food packaging regarding their properties, characteristics, and functionalization towards active properties enhancement. In this way, several types of films that are prepared with cellulose and their derivatives, incorporating antimicrobial and antioxidant compounds, are herein described, and discussed.
Collapse
|
10
|
Duceac IA, Coseri S. Biopolymers and their derivatives: Key components of advanced biomedical technologies. Biotechnol Adv 2022; 61:108056. [DOI: 10.1016/j.biotechadv.2022.108056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2022] [Revised: 09/26/2022] [Accepted: 10/23/2022] [Indexed: 11/02/2022]
|
11
|
Optical and Mechanical Properties of Self-Repairing Pectin Biopolymers. Polymers (Basel) 2022; 14:polym14071345. [PMID: 35406219 PMCID: PMC9002866 DOI: 10.3390/polym14071345] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Revised: 03/18/2022] [Accepted: 03/21/2022] [Indexed: 02/06/2023] Open
Abstract
Pectin’s unique physicochemical properties have been linked to a variety of reparative and regenerative processes in nature. To investigate the effect of water on pectin repair, we used a 5 mm stainless-steel uniaxial load to fracture glass phase pectin films. The fractured gel phase films were placed on a 1.5–1.8 mm thick layer of water and incubated for 8 h at room temperature and ambient humidity. There was no immersion or agitation. The repaired pectin film was subsequently assessed for its optical and mechanical properties. Light microscopy demonstrated repair of the detectable fracture area and restoration of the films’ optical properties. The burst strength of the repaired film declined to 55% of the original film. However, its resilience was restored to 87% of the original film. Finally, a comparison of the initial and post-repair fracture patterns demonstrated no recurrent fissures in the repaired glass phase films. The water-induced repair of the pectin film was superior to the optical and mechanical properties of the repaired films composed of nanocellulose fibers, sodium hyaluronate, and oxidized cellulose. We conclude that the unique physicochemical properties of pectin facilitate the water-induced self-repair of fractured pectin films.
Collapse
|
12
|
Wu J, Wang Y, Han J, Wang L, Li C, Mao Y, Wang Y. A method of preparing mesoporous Zr-based MOF and application in enhancing immobilization of cellulase on carrier surface. Biochem Eng J 2022. [DOI: 10.1016/j.bej.2022.108342] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023]
|
13
|
Tang C, Zhao Z, Yang M, Lu X, Fu L, Jiang G. Preparation and characterization of sodium cellulose sulfate/chitosan composite films loaded with curcumin for monitoring pork freshness. Curr Res Food Sci 2022; 5:1475-1483. [PMID: 36132488 PMCID: PMC9483810 DOI: 10.1016/j.crfs.2022.08.019] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2022] [Revised: 08/14/2022] [Accepted: 08/26/2022] [Indexed: 11/27/2022] Open
Abstract
Colorimetric films were prepared by incorporating curcumin into a sodium cellulose sulfate/chitosan composite. The morphology mechanical, and water vapor properties of the films were investigated, and their practical use in pork preservation was evaluated. The formula with the same charge ratio of sodium cellulose sulfate and chitosan had the highest tensile strength (TS). After the addition of curcumin, the tensile strength increased, whereas the water vapor permeability (WVP) decreased. The colorimetric film showed distinguishable color changes between the pH ranges of 3–10. The colorimetric film packaging extended the shelf life of the pork samples by 4 days. Moreover, the composite films were able to effectively monitor pork freshness. In conclusion, curcumin incorporated into sodium cellulose sulfate/chitosan composite films may have great potential in food packaging. Sodium cellulose sulfate/chitosan/curcumin films were produced for food packaging. The properties of composite films were enhanced due to electrostatic interaction. The composite films changed their colors in response to the change of pH. The composite films could monitor the freshness and extend shelf life of pork.
Collapse
Affiliation(s)
- Chuan Tang
- College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China
- Dalian Fusheng Natural Medicinal Development Co. Limited, Dalian, Liaoning, 116600, China
- Corresponding author. College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China.
| | - Zhixin Zhao
- College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China
| | - Ming Yang
- College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China
| | - Xuan Lu
- College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China
| | - Li Fu
- Dalian Fusheng Natural Medicinal Development Co. Limited, Dalian, Liaoning, 116600, China
| | - Ge Jiang
- College of Life Science and Technology, Dalian University, Dalian, Liaoning, 116622, China
- Corresponding author.
| |
Collapse
|
14
|
Kazachenko A, Akman F, Medimagh M, Issaoui N, Vasilieva N, Malyar YN, Sudakova IG, Karacharov A, Miroshnikova A, Al-Dossary OM. Sulfation of Diethylaminoethyl-Cellulose: QTAIM Topological Analysis and Experimental and DFT Studies of the Properties. ACS OMEGA 2021; 6:22603-22615. [PMID: 34514232 PMCID: PMC8427635 DOI: 10.1021/acsomega.1c02570] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/17/2021] [Accepted: 08/12/2021] [Indexed: 01/18/2023]
Abstract
Sulfated cellulose derivatives are biologically active substances with anticoagulant properties. In this study, a new sulfated diethylaminoethyl (DEAE)-cellulose derivative has been obtained. The effect of a solvent on the sulfation process has been investigated. It is shown that 1,4-dioxane is the most effective solvent, which ensures the highest sulfur content in DEAE-cellulose sulfate under sulfamic acid sulfation. The processes of sulfamic acid sulfation in the presence of urea in 1,4-dioxane and in a deep eutectic solvent representing a mixture of sulfamic acid and urea have been compared. It is demonstrated that the use of 1,4-dioxane yields the sulfated product with a higher sulfur content. The obtained sulfated DEAE-cellulose derivatives have been analyzed by Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron and atomic force microscopy, and the degree of their polymerization has been determined. The introduction of a sulfate group has been confirmed by the Fourier transform infrared spectroscopy data; the absorption bands corresponding to sulfate groups have been observed in the ranges of 1247-1256 and 809-816 cm-1. It is shown that the use of a deep eutectic solvent leads to the side carbamation reactions. Amorphization of DEAE-cellulose during sulfation has been demonstrated using X-ray diffractometry. The geometric structure of a molecule in the ground state has been calculated using the density functional theory with the B3LYP/6-31G(d, p) basis set. The reactive areas of DEAE-cellulose and its sulfated derivatives have been analyzed using molecular electrostatic potential maps. The thermodynamic parameters (heat capacity, entropy, and enthalpy) of the target sulfation products have been determined. The HOMO-LUMO energy gap, Mulliken atomic charges, and electron density topology of the title compound have been calculated within the atoms in molecule theory.
Collapse
Affiliation(s)
- Aleksandr Kazachenko
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
- Siberian
Federal University, pr.
Svobodny, 79, Krasnoyarsk 660041, Russia
| | - Feride Akman
- Vocational
School of Food, Agriculture and Livestock, University of Bingöl, Bingöl 12000, Turkey
| | - Mouna Medimagh
- Laboratory
of Quantum and Statistical Physics (LR18ES18), Faculty of Sciences, University of Monastir, Monastir 5079, Tunisia
| | - Noureddine Issaoui
- Laboratory
of Quantum and Statistical Physics (LR18ES18), Faculty of Sciences, University of Monastir, Monastir 5079, Tunisia
| | - Natalya Vasilieva
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
- Siberian
Federal University, pr.
Svobodny, 79, Krasnoyarsk 660041, Russia
| | - Yuriy N. Malyar
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
- Siberian
Federal University, pr.
Svobodny, 79, Krasnoyarsk 660041, Russia
| | - Irina G. Sudakova
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
| | - Anton Karacharov
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
| | - Angelina Miroshnikova
- Institute
of Chemistry and Chemical Technology, Krasnoyarsk Science Center,
Siberian Branch, Russian Academy of Sciences, Akademgorodok, 50/24, Krasnoyarsk 660036, Russia
- Siberian
Federal University, pr.
Svobodny, 79, Krasnoyarsk 660041, Russia
| | - Omar Marzook Al-Dossary
- Department
of Physics and Astronomy, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia
| |
Collapse
|
15
|
Yang Y, Lu YT, Zeng K, Heinze T, Groth T, Zhang K. Recent Progress on Cellulose-Based Ionic Compounds for Biomaterials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2000717. [PMID: 32270900 DOI: 10.1002/adma.202000717] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2020] [Revised: 02/25/2020] [Accepted: 02/26/2020] [Indexed: 05/06/2023]
Abstract
Glycans play important roles in all major kingdoms of organisms, such as archea, bacteria, fungi, plants, and animals. Cellulose, the most abundant polysaccharide on the Earth, plays a predominant role for mechanical stability in plants, and finds a plethora of applications by humans. Beyond traditional use, biomedical application of cellulose becomes feasible with advances of soluble cellulose derivatives with diverse functional moieties along the backbone and modified nanocellulose with versatile functional groups on the surface due to the native features of cellulose as both cellulose chains and supramolecular ordered domains as extractable nanocellulose. With the focus on ionic cellulose-based compounds involving both these groups primarily for biomedical applications, a brief introduction about glycoscience and especially native biologically active glycosaminoglycans with specific biomedical application areas on humans is given, which inspires further development of bioactive compounds from glycans. Then, both polymeric cellulose derivatives and nanocellulose-based compounds synthesized as versatile biomaterials for a large variety of biomedical applications, such as for wound dressings, controlled release, encapsulation of cells and enzymes, and tissue engineering, are separately described, regarding the diverse routes of synthesis and the established and suggested applications for these highly interesting materials.
Collapse
Affiliation(s)
- Yang Yang
- Wood Technology and Wood Chemistry, University of Goettingen, Büsgenweg 4, Göttingen, 37077, Germany
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Wushan Road 381, Guangzhou, 510640, P. R. China
| | - Yi-Tung Lu
- Department Biomedical Materials, Institute of Pharmacy, Martin Luther University Halle-Wittenberg, Heinrich-Damerow-Strasse 4, Halle (Saale), 06120, Germany
| | - Kui Zeng
- Wood Technology and Wood Chemistry, University of Goettingen, Büsgenweg 4, Göttingen, 37077, Germany
| | - Thomas Heinze
- Institute of Organic Chemistry and Macromolecular Chemistry, Friedrich Schiller University of Jena, Centre of Excellence for Polysaccharide Research, Humboldt Straße 10, Jena, D-07743, Germany
| | - Thomas Groth
- Department Biomedical Materials, Institute of Pharmacy, Martin Luther University Halle-Wittenberg, Heinrich-Damerow-Strasse 4, Halle (Saale), 06120, Germany
- Interdisciplinary Center of Materials Science, Martin Luther University Halle-Wittenberg, Halle (Saale), 06120, Germany
- Laboratory of Biomedical Nanotechnologies, Institute of Bionic Technologies and Engineering, I. M. Sechenov First Moscow State University, Trubetskaya Street 8, 119991, Moscow, Russian Federation
| | - Kai Zhang
- Wood Technology and Wood Chemistry, University of Goettingen, Büsgenweg 4, Göttingen, 37077, Germany
| |
Collapse
|
16
|
Photopolymerizable pullulan: Synthesis, self-assembly and inkjet printing. J Colloid Interface Sci 2021; 592:430-439. [PMID: 33706154 DOI: 10.1016/j.jcis.2021.02.074] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2021] [Revised: 02/08/2021] [Accepted: 02/16/2021] [Indexed: 12/18/2022]
Abstract
HYPOTHESIS Pullulan, an exopolysaccharide consisting of maltotriose repeating units, has recently found many applications in different fields, such as food, packaging, cosmetics and pharmaceuticals. The introduction of photo-crosslinkable methacrylic units potentially allows to use pullulan derivative in inkjet 3D printing. EXPERIMENTS Pullulan was functionalized with methacrylic groups and the derivative was characterized by NMR, FT-IR and Raman spectroscopy. Water dispersions were thoroughly investigated by optical microscopy, SAXS and rheology to evaluate the self-assembly properties and they were used as photo-crosslinkable inks in a 3D printer, also in comparison with pristine pullulan. The structural and mechanical properties of the obtained films were studied by Atomic Force Microscopy and tensile strength tests. FINDINGS The introduction of methacrylic groups moderately affects the self-assembly of the polymer in water, resulting in a slight increase of the gyration radius of the polymer coils and in a small decrease of the viscosity, retaining the typical shear-thinning behavior of concentrated polysaccharides in water. The structural and mechanical properties of the 3D printed films are much more affected, showing the presence of sub-micrometric phase segregated domains which are further separated by the cross-linking. As a result, the deformability of the materials is improved, with a lower tensile strength.
Collapse
|
17
|
Conformational and rheological properties of bacterial cellulose sulfate. Int J Biol Macromol 2021; 183:2326-2336. [PMID: 34089760 DOI: 10.1016/j.ijbiomac.2021.06.001] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2021] [Revised: 05/21/2021] [Accepted: 06/01/2021] [Indexed: 11/22/2022]
Abstract
In this study, a water-soluble bacterial cellulose sulfate (BCS) was prepared with sulfur trioxide pyridine complex (SO3· Py) in a lithium chloride (LiCl)/dimethylacetamide (DMAc) homogeneous solution system using bacterial cellulose (BC). The structural study showed that the value for the degrees of substitution of BCS was 1.23. After modification, the C-6 hydroxyl group of BC was completely substituted and the C-2 and C-3 hydroxyl groups were partially substituted. In an aqueous solution, the BCS existed as a linear polymer with irregular coil conformation, which was consistent with the findings observed using atomic force microscopy. The steady-state shear flow and dynamic viscoelasticity were systematically determined over a range of BCS concentrations (1 %-4 %, w/v) and temperature (5 °C-50 °C). Steady-state flow experiments revealed that BCS exhibited shear thinning behavior, which increased with an increase in concentration and a decrease in temperature. These observations were quantitatively demonstrated using the cross model. Moreover, based on the dynamical viscoelastic properties, we confirmed that BCS was a temperature-sensitive and weak elastic gel, which was somewhere between a dilute solution and an elastic gel. Therefore, considering the special synthetic strategy and rheological behavior, BCS might be used as a renewable material in the field of biological tissue engineering, especially in the manufacture of injectable hydrogels, cell scaffolds, and as a drug carrier.
Collapse
|
18
|
Mapping the surface potential, charge density and adhesion of cellulose nanocrystals using advanced scanning probe microscopy. Carbohydr Polym 2020; 246:116393. [PMID: 32747225 DOI: 10.1016/j.carbpol.2020.116393] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2019] [Revised: 04/26/2020] [Accepted: 04/29/2020] [Indexed: 01/23/2023]
Abstract
Cellulose nanocrystals (CNC) are the focus of significant attention in the broad area of sustainable technologies for possessing many desirable properties such as a large surface area, high strength and stiffness, outstanding colloidal stability, excellent biocompatibility and biodegradability, low weight and abundance in nature. Yet, a fundamental understanding of the micro- and nanoscale electrical charge distribution on nanocellulose still remains elusive. Here we present direct quantification and mapping of surface charges on CNCs at ambient condition using advanced surface probe microscopy techniques such as Kelvin probe force microscopy (KPFM), electrostatic force microscopy (EFM) and force-distance (F-D) curve measurements. We show by EFM measurements that the surface charge in the solid-state (as contrasted with liquid dispersions) present at ambient condition on CNCs provided by Innotech Alberta is intrinsically negative and the charge density is estimated to be 13 μC/cm2. These charges also result in CNCs having two times the adhesive force exhibited by SiO2 substrates in adhesion mapping studies. The origin of negative surface charge is likely due to the formation of CNCs through sulfuric acid hydrolysis where sulfate half esters groups remained on the surface (Johnston et al., 2018).
Collapse
|
19
|
Abu Bakar MH, Azeman NH, Mobarak NN, Mokhtar MHH, A Bakar AA. Effect of Active Site Modification towards Performance Enhancement in Biopolymer κ-Carrageenan Derivatives. Polymers (Basel) 2020; 12:E2040. [PMID: 32911662 PMCID: PMC7564788 DOI: 10.3390/polym12092040] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2020] [Revised: 08/14/2020] [Accepted: 08/18/2020] [Indexed: 12/18/2022] Open
Abstract
This research demonstrates a one-step modification process of biopolymer carrageenan active sites through functional group substitution in κ-carrageenan structures. The modification process improves the electronegative properties of κ-carrageenan derivatives, leading to enhancement of the material's performance. Synthesized succinyl κ-carrageenan with a high degree of substitution provides more active sites for interaction with analytes. The FTIR analysis of succinyl κ-carrageenan showed the presence of new peaks at 1068 cm-1, 1218 cm-1, and 1626 cm-1 that corresponded to the vibrations of C-O and C=O from the carbonyl group. A new peak at 2.86 ppm in 1H NMR represented the methyl proton neighboring with C=O. The appearance of new peaks at 177.05 and 177.15 ppm in 13C NMR proves the substitution of the succinyl group in the κ-carrageenan structure. The elemental analysis was carried out to calculate the degree of substitution with the highest value of 1.78 at 24 h of reaction. The XRD diffractogram of derivatives exhibited a higher degree of crystallinity compared to pristine κ-carrageenan at 23.8% and 9.2%, respectively. Modification of κ-carrageenan with a succinyl group improved its interaction with ions and the conductivity of the salt solution compared to its pristine form. This work has a high potential to be applied in various applications such as sensors, drug delivery, and polymer electrolytes.
Collapse
Affiliation(s)
- Mohd Hafiz Abu Bakar
- Photonics Technology Laboratory, Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia; (M.H.A.B.); (M.H.H.M.)
| | - Nur Hidayah Azeman
- Photonics Technology Laboratory, Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia; (M.H.A.B.); (M.H.H.M.)
| | - Nadhratun Naiim Mobarak
- Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia;
| | - Mohd Hadri Hafiz Mokhtar
- Photonics Technology Laboratory, Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia; (M.H.A.B.); (M.H.H.M.)
| | - Ahmad Ashrif A Bakar
- Photonics Technology Laboratory, Department of Electrical, Electronic & Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia; (M.H.A.B.); (M.H.H.M.)
| |
Collapse
|
20
|
Zheng B, Ge S, Wang S, Shao Q, Jiao C, Liu M, Das R, Dong B, Guo Z. Effect of γ-aminopropyltriethoxysilane on the properties of cellulose acetate butyrate modified acrylic waterborne coatings. REACT FUNCT POLYM 2020. [DOI: 10.1016/j.reactfunctpolym.2020.104657] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
21
|
Junter GA, Lebrun L. Polysaccharide-based chromatographic adsorbents for virus purification and viral clearance. J Pharm Anal 2020; 10:291-312. [PMID: 32292625 PMCID: PMC7104128 DOI: 10.1016/j.jpha.2020.01.002] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/10/2019] [Revised: 01/10/2020] [Accepted: 01/11/2020] [Indexed: 12/20/2022] Open
Abstract
Viruses still pose a significant threat to human and animal health worldwide. In the fight against viral infections, high-purity viral stocks are needed for manufacture of safer vaccines. It is also a priority to ensure the viral safety of biopharmaceuticals such as blood products. Chromatography techniques are widely implemented at both academic and industrial levels in the purification of viral particles, whole viruses and virus-like particles to remove viral contaminants from biopharmaceutical products. This paper focuses on polysaccharide adsorbents, particulate resins and membrane adsorbers, used in virus purification/removal chromatography processes. Different chromatographic modes are surveyed, with particular attention to ion exchange and affinity/pseudo-affinity adsorbents among which commercially available agarose-based resins (Sepharose®) and cellulose-based membrane adsorbers (Sartobind®) occupy a dominant position. Mainly built on the development of new ligands coupled to conventional agarose/cellulose matrices, the development perspectives of polysaccharide-based chromatography media in this antiviral area are stressed in the conclusive part.
Collapse
Affiliation(s)
- Guy-Alain Junter
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 76000, Rouen, France
| | - Laurent Lebrun
- Normandie Univ, UNIROUEN, INSA Rouen, CNRS, PBS, 76000, Rouen, France
| |
Collapse
|
22
|
Oprea M, Voicu SI. Recent advances in composites based on cellulose derivatives for biomedical applications. Carbohydr Polym 2020; 247:116683. [PMID: 32829811 DOI: 10.1016/j.carbpol.2020.116683] [Citation(s) in RCA: 94] [Impact Index Per Article: 23.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2020] [Revised: 06/21/2020] [Accepted: 06/22/2020] [Indexed: 01/17/2023]
Abstract
Cellulose derivatives represent a viable alternative to pure cellulose due to their solubility in water and common organic solvents. This, coupled with their low cost, biocompatibility, and biodegradability, makes them an attractive choice for applications related to the biomedicine and bioanalysis area. Cellulose derivatives-based composites with improved properties were researched as films and membranes for osseointegration, hemodialysis and biosensors, smart textile fibers, tissue engineering scaffolds, hydrogels and nanoparticles for drug delivery. The different preparation strategies of these polymeric composites as well as the most recent available experimental results were described in this review. General aspects such as structure and properties of cellulose extracted from plants or bacterial sources, types of cellulose derivatives and their synthesis methods were also discussed. Finally, the future perspectives related to composites based on cellulose derivatives were highlighted and some conclusions regarding the reviewed applications were drawn.
Collapse
Affiliation(s)
- Madalina Oprea
- National Institute for Research and Development in Chemistry and Petrochemistry - ICECHIM, Splaiul Independentei 202, 060021 Bucharest, Romania; Department of Analytical Chemistry and Environmental Engineering, University Politehnica of Bucharest, 011061 Bucharest, Romania
| | - Stefan Ioan Voicu
- Department of Analytical Chemistry and Environmental Engineering, University Politehnica of Bucharest, 011061 Bucharest, Romania; Advanced Polymers Materials Group, University Politehnica of Bucharest, 011061 Bucharest, Romania.
| |
Collapse
|
23
|
Besford QA, Cavalieri F, Caruso F. Glycogen as a Building Block for Advanced Biological Materials. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1904625. [PMID: 31617264 DOI: 10.1002/adma.201904625] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2019] [Revised: 08/15/2019] [Indexed: 06/10/2023]
Abstract
Biological nanoparticles found in living systems possess distinct molecular architectures and diverse functions. Glycogen is a unique biological polysaccharide nanoparticle fabricated by nature through a bottom-up approach. The biocatalytic synthesis of glycogen has evolved over time to form a nanometer-sized dendrimer-like structure (20-150 nm) with a highly branched surface and a dense core. This makes glycogen markedly different from other natural linear or branched polysaccharides and particularly attractive as a platform for biomedical applications. Glycogen is inherently biodegradable, nontoxic, and can be functionalized with diverse surface and internal motifs for enhanced biofunctional properties. Recently, there has been growing interest in glycogen as a natural alternative to synthetic polymers and nanoparticles in a range of applications. Herein, the recent literature on glycogen in the material-based sciences, including its use as a constituent in biodegradable hydrogels and fibers, drug delivery vectors, tumor targeting and penetrating nanoparticles, immunomodulators, vaccine adjuvants, and contrast agents, is reviewed. The various methods of chemical functionalization and physical assembly of glycogen nanoparticles into multicomponent nanodevices, which advance glycogen toward a functional therapeutic nanoparticle from nature and back again, are discussed in detail.
Collapse
Affiliation(s)
- Quinn A Besford
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
| | - Francesca Cavalieri
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
- Dipartimento di Scienze e Tecnologie Chimiche, Università degli Studi di Roma Tor Vergata, via della Ricerca Scientifica 1, 00133, Rome, Italy
| | - Frank Caruso
- ARC Centre of Excellence in Convergent Bio-Nano Science and Technology, and the Department of Chemical Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia
| |
Collapse
|
24
|
Mosaiab T, Farr DC, Kiefel MJ, Houston TA. Carbohydrate-based nanocarriers and their application to target macrophages and deliver antimicrobial agents. Adv Drug Deliv Rev 2019; 151-152:94-129. [PMID: 31513827 DOI: 10.1016/j.addr.2019.09.002] [Citation(s) in RCA: 41] [Impact Index Per Article: 8.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/23/2019] [Revised: 09/02/2019] [Accepted: 09/05/2019] [Indexed: 12/18/2022]
Abstract
Many deadly infections are produced by microorganisms capable of sustained survival in macrophages. This reduces exposure to chemadrotherapy, prevents immune detection, and is akin to criminals hiding in police stations. Therefore, the use of glyco-nanoparticles (GNPs) as carriers of therapeutic agents is a burgeoning field. Such an approach can enhance the penetration of drugs into macrophages with specific carbohydrate targeting molecules on the nanocarrier to interact with macrophage lectins. Carbohydrates are natural biological molecules and the key constituents in a large variety of biological events such as cellular communication, infection, inflammation, enzyme trafficking, cellular migration, cancer metastasis and immune functions. The prominent characteristics of carbohydrates including biodegradability, biocompatibility, hydrophilicity and the highly specific interaction of targeting cell-surface receptors support their potential application to drug delivery systems (DDS). This review presents the 21st century development of carbohydrate-based nanocarriers for drug targeting of therapeutic agents for diseases localized in macrophages. The significance of natural carbohydrate-derived nanoparticles (GNPs) as anti-microbial drug carriers is highlighted in several areas of treatment including tuberculosis, salmonellosis, leishmaniasis, candidiasis, and HIV/AIDS.
Collapse
Affiliation(s)
- Tamim Mosaiab
- Institute for Glycomics, Griffith University, Gold Coast Campus, QLD 4222, Australia
| | - Dylan C Farr
- Institute for Glycomics, Griffith University, Gold Coast Campus, QLD 4222, Australia
| | - Milton J Kiefel
- Institute for Glycomics, Griffith University, Gold Coast Campus, QLD 4222, Australia.
| | - Todd A Houston
- Institute for Glycomics, Griffith University, Gold Coast Campus, QLD 4222, Australia.
| |
Collapse
|
25
|
Homogenous synthesis of sodium cellulose sulfates with regulable low and high degree of substitutions with SO3/Py in N,N-dimethylacetamide/LiCl. Eur Polym J 2019. [DOI: 10.1016/j.eurpolymj.2019.07.030] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
26
|
Preparation of Polyanionic Cellulosic Microparticles with Antioxidant Capacity by Introducing Sulphurous Acid Groups onto Cellulose. ADVANCES IN POLYMER TECHNOLOGY 2019. [DOI: 10.1155/2019/2374792] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
In this work, we presented a facile pathway to fabricate polyanionic cellulosic microparticles by selective oxidation with sodium periodate firstly, followed by grafting sodium bisulfite to the 2,3-dialdehyde cellulose particles. The obtained polyanionic cellulosic microparticles with the particle size of 2-4 μm had increased stability in water, and it had pH responsiveness. Moreover, the polyanionic cellulosic microparticles had excellent film-forming property, and the tensile strength of the film formed from pristine cellulose particles was about 40 MPa, and it increased to 64 MPa for the film formed from SRC-50 particles. Furthermore, the polyanionic cellulosic microparticles had certain reduction ability, and it could be used as coating to cover the surface of fruits or vegetables, and it could prevent the discoloration of the fresh-cut potato. The cellulose based particle coating with excellent antibrowning capacity, biocompatible, and environmentally friendly characteristics would be attractive for the applications in packaging material for food preservation.
Collapse
|
27
|
Zeng K, Groth T, Zhang K. Recent Advances in Artificially Sulfated Polysaccharides for Applications in Cell Growth and Differentiation, Drug Delivery, and Tissue Engineering. Chembiochem 2018; 20:737-746. [DOI: 10.1002/cbic.201800569] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2018] [Indexed: 12/21/2022]
Affiliation(s)
- Kui Zeng
- Wood Technology and Wood ChemistryGeorg-August-University of Goettingen Büsgenweg 4 37077 Göttingen Germany
| | - Thomas Groth
- Biomedical Materials GroupMartin Luther University Halle-Wittenberg Heinrich-Damerow-Strasse 4 06120 Halle/Saale Germany
| | - Kai Zhang
- Wood Technology and Wood ChemistryGeorg-August-University of Goettingen Büsgenweg 4 37077 Göttingen Germany
| |
Collapse
|
28
|
Huang G, Lin WC, He P, Pan Y, Shu CM. Thermal decomposition of imidazolium-based ionic liquid binary mixture: Processes and mechanisms. J Mol Liq 2018. [DOI: 10.1016/j.molliq.2018.09.058] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
29
|
Weber D, Knaak S, Hettrich K, Andrulis M, Momburg F, Quade M, Gelinsky M, Schwartz-Albiez R. Influence of Regioselectively Sulfated Cellulose on in Vitro Vascularization of Biomimetic Bone Matrices. Biomacromolecules 2018; 19:4228-4238. [DOI: 10.1021/acs.biomac.8b01004] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Dominik Weber
- German Cancer Research Center (DKFZ), Clinical Cooperation Unit Applied Tumor Immunology, Im Neuenheimer Feld 280, 69120 Heidelberg, Germany
| | - Sven Knaak
- Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, Technische Universität Dresden, Fetscher Strasse 74, 1307 Dresden, Germany
| | - Kay Hettrich
- Fraunhofer Institut für Angewandte Polymerforschung (IAP), Geiselbergstrasse 69, 14476 Potsdam-Golm Germany
| | - Mindaugas Andrulis
- Institute of Pathology, Heidelberg University, Im Neuenheimer Feld 224, 69120 Heidelberg, Germany
| | - Frank Momburg
- German Cancer Research Center (DKFZ), Clinical Cooperation Unit Applied Tumor Immunology, Im Neuenheimer Feld 280, 69120 Heidelberg, Germany
| | - Mandy Quade
- Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, Technische Universität Dresden, Fetscher Strasse 74, 1307 Dresden, Germany
| | - Michael Gelinsky
- Centre for Translational Bone, Joint and Soft Tissue Research, University Hospital Carl Gustav Carus and Faculty of Medicine, Technische Universität Dresden, Fetscher Strasse 74, 1307 Dresden, Germany
| | - Reinhard Schwartz-Albiez
- German Cancer Research Center (DKFZ), Clinical Cooperation Unit Applied Tumor Immunology, Im Neuenheimer Feld 280, 69120 Heidelberg, Germany
| |
Collapse
|
30
|
Wu QX, Guan YX, Yao SJ. Sodium cellulose sulfate: A promising biomaterial used for microcarriers’ designing. Front Chem Sci Eng 2018. [DOI: 10.1007/s11705-018-1723-x] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
31
|
Meireles AB, Corrêa DK, da Silveira JVW, Millás ALG, Bittencourt E, de Brito-Melo GEA, González-Torres LA. Trends in polymeric electrospun fibers and their use as oral biomaterials. Exp Biol Med (Maywood) 2018; 243:665-676. [PMID: 29763386 PMCID: PMC6378505 DOI: 10.1177/1535370218770404] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Abstract
Electrospinning is one of the techniques to produce structured polymeric fibers in the micro or nano scale and to generate novel materials for biomedical proposes. Electrospinning versatility provides fibers that could support different surgical and rehabilitation treatments. However, its diversity in equipment assembly, polymeric materials, and functional molecules to be incorporated in fibers result in profusion of recent biomaterials that are not fully explored, even though the recognized relevance of the technique. The present article describes the main electrospun polymeric materials used in oral applications, and the main aspects and parameters of the technique. Natural and synthetic polymers, blends, and composites were identified from the available literature and recent developments. Main applications of electrospun fibers were focused on drug delivery systems, tissue regeneration, and material reinforcement or modification, although studies require further investigation in order to enable direct use in human. Current and potential usages as biomaterials for oral applications must motivate the development in the use of electrospinning as an efficient method to produce highly innovative biomaterials, over the next few years. Impact statement Nanotechnology is a challenge for many researchers that look for obtaining different materials behaviors by modifying characteristics at a very low scale. Thus, the production of nanostructured materials represents a very important field in bioengineering, in which the electrospinning technique appears as a suitable alternative. This review discusses and provides further explanation on this versatile technique to produce novel polymeric biomaterials for oral applications. The use of electrospun fibers is incipient in oral areas, mainly because of the unfamiliarity with the technique. Provided disclosure, possibilities and state of the art are aimed at supporting interested researchers to better choose proper materials, understand, and design new experiments. This work seeks to encourage many other researchers-Dentists, Biologists, Engineers, Pharmacists-to develop innovative materials from different polymers. We highlight synthetic and natural polymers as trends in treatments to motivate an advance in the worldwide discussion and exploration of this interdisciplinary field.
Collapse
Affiliation(s)
- Agnes B Meireles
- Pharmacy Department, Laboratory of Immunology, UFVJM and PPGCF-UFVJM, Diamantina, MG 39100-000, Brazil
| | - Daniella K Corrêa
- Institute of Science and Technology – UFVJM, Diamantina, MG 39100-000, Brazil
| | - João VW da Silveira
- Institute of Science and Technology – UFVJM, Diamantina, MG 39100-000, Brazil
| | - Ana LG Millás
- Chemical Engineering Department, UNICAMP, Campinas, SP 13083-852, Brazil
| | - Edison Bittencourt
- Chemical Engineering Department, UNICAMP, Campinas, SP 13083-852, Brazil
| | - Gustavo EA de Brito-Melo
- Pharmacy Department, Laboratory of Immunology, UFVJM and PPGCF-UFVJM, Diamantina, MG 39100-000, Brazil
| | | |
Collapse
|
32
|
Negrea A, Gabor A, Davidescu CM, Ciopec M, Negrea P, Duteanu N, Barbulescu A. Rare Earth Elements Removal from Water Using Natural Polymers. Sci Rep 2018; 8:316. [PMID: 29321487 PMCID: PMC5762904 DOI: 10.1038/s41598-017-18623-0] [Citation(s) in RCA: 33] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2017] [Accepted: 12/15/2017] [Indexed: 11/30/2022] Open
Abstract
Adsorption of rare earth metals, Eu (III) and Nd (III) was investigated on a new environmental friendly material, thiourea functionalized cellulose. Before usage, the synthesized material was characterized by Fourrier Transform Infrared spectroscopy and energy dispersive X-ray analysis. The influence of adsorption parameters (adsorbent dosage, time, temperature and initial metal concentration) on adsorption capacity was investigated. Experimental data were fitted by using the pseudo-first-order and pseudo-second-order kinetic models. Simultaneously thermodynamic and equilibrium studies have been carried out using Langmuir, Freundlich and Sips isotherm. Maximum adsorption capacities were reached in 30 minutes at 298 K having the value of 27 mg/g for Eu (III) and 73 mg/g for Nd (III).
Collapse
Affiliation(s)
- Adina Negrea
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania
| | - Andreea Gabor
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania
| | - Corneliu Mircea Davidescu
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania.
| | - Mihaela Ciopec
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania
| | - Petru Negrea
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania
| | - Narcis Duteanu
- Politehnica University Timişoara, Faculty of Industrial Chemistry and Environmental Engineering, Victoriei Square Nr. 2, 300006, Timişoara, Romania.
| | - Alina Barbulescu
- Ovidius University of Costanta, Romania,124, Mamaia Blvd., 900527, Constanta, Romania
| |
Collapse
|
33
|
Wang HQ, Tan H, Hua S, Liu ZY, Yang W, Yang MB. High Efficiency Conversion of Regenerated Cellulose Hydrogel Directly to Functionalized Cellulose Nanoparticles. Macromol Rapid Commun 2017; 38. [DOI: 10.1002/marc.201700409] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2017] [Revised: 09/22/2017] [Indexed: 01/21/2023]
Affiliation(s)
- Han-Qing Wang
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| | - Huang Tan
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| | - Sun Hua
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| | - Zheng-Ying Liu
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| | - Wei Yang
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| | - Ming-Bo Yang
- College of Polymer Science and Engineering; State Key Laboratory of Polymer Materials Engineering; Sichuan University; Chengdu 610065 China
| |
Collapse
|
34
|
Muhitdinov B, Heinze T, Normakhamatov N, Turaev A. Preparation of sodium cellulose sulfate oligomers by free-radical depolymerization. Carbohydr Polym 2017; 173:631-637. [DOI: 10.1016/j.carbpol.2017.06.033] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2017] [Revised: 05/29/2017] [Accepted: 06/07/2017] [Indexed: 11/29/2022]
|
35
|
Preparation and characterization of aminoethyl hydroxypropyl starch modified with collagen peptide. Int J Biol Macromol 2017; 101:996-1003. [DOI: 10.1016/j.ijbiomac.2017.03.131] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2016] [Revised: 03/16/2017] [Accepted: 03/19/2017] [Indexed: 11/20/2022]
|
36
|
Zhao X, Pan Y, Jiang J, Xu S, Jiang J, Ding L. Thermal Hazard of Ionic Liquids: Modeling Thermal Decomposition Temperatures of Imidazolium Ionic Liquids via QSPR Method. Ind Eng Chem Res 2017. [DOI: 10.1021/acs.iecr.6b04762] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Xinyue Zhao
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Yong Pan
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Juncheng Jiang
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Shuangyan Xu
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Jiajia Jiang
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| | - Li Ding
- Jiangsu Key Laboratory of
Hazardous Chemicals Safety and Control, College of Safety Science
and Engineering, Nanjing Tech University, Nanjing 210009, China
| |
Collapse
|
37
|
Synthesis and characterization of new shellac–hydroxypropylmethylcellulose composite for pharmaceutical applications. Polym Bull (Berl) 2017. [DOI: 10.1007/s00289-017-1903-8] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
38
|
Wu QX, Xu X, Wang ZL, Yao SJ, Tong WY, Chen Y. Effect of the cross-linking agent on performances of NaCS-CS/WSC microcapsules. Colloids Surf B Biointerfaces 2016; 147:416-421. [DOI: 10.1016/j.colsurfb.2016.08.025] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2016] [Revised: 07/22/2016] [Accepted: 08/17/2016] [Indexed: 12/18/2022]
|
39
|
Fan L, Hu J, Hu Z, Peng M, Wen H, Li Y, Wang T. Preparation and characterization of aminoethyl hydroxypropyl methyl cellulose modified with nisin. Int J Biol Macromol 2016; 89:62-9. [DOI: 10.1016/j.ijbiomac.2016.03.009] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2016] [Revised: 02/20/2016] [Accepted: 03/05/2016] [Indexed: 01/31/2023]
|
40
|
B.S. Albuquerque P, C.B.B. Coelho L, A. Teixeira J, G. Carneiro-da-Cunha M. Approaches in biotechnological applications of natural polymers. AIMS MOLECULAR SCIENCE 2016. [DOI: 10.3934/molsci.2016.3.386] [Citation(s) in RCA: 32] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022] Open
|