Extrusion induced low-order starch matrices: Enzymic hydrolysis and structure

Enhancing cassava beer quality: Extrusion-induced modification of cassava starch structure boosts fermentable sugar content in wort

The high starch content and cost-effectiveness of cassava make it an attractive adjunct in beer brewing, with the fine structure of starch playing a crucial role in determining the composition of fermentable sugars (FS) and overall beer quality. This study investigated the effect of extrusion-induced changes in the starch structure of cassava flour on the FS profile of the wort and, consequently, on the quality attributes of cassava beer. The findings revealed that the shear stress during extrusion significantly reduced the molecular weight to 1.20 × 105g/mol and the branching degree of amylopectin. Simultaneously, there was an increase in the concentrations of short- and intermediate- chain amylose by 5.61% and 42.72%, respectively. These structural changes enhanced the enzymatic hydrolysis of extruded cassava flour (ECF), resulting in a higher total fermentable sugars content (22.00g/100 mL) in the ECF wort, predominantly composed of maltose and glucose. Furthermore, the altered FS profile led to an increased production of higher alcohols and esters in extruded cassava beer (ECB), particularly noted for the elevation of 2-phenylethyl alcohol levels, which imparted a distinctive rose aroma to the ECB. Consequently, the sensory profile of ECB showed significant improvement. This study offers critical insight into optimizing cassava beer quality and broadens the potential applications of cassava flour in the brewing industry.

Evaluation of extruded starch foam for glucose-supplying biomaterials

The survival rate of mesenchymal stem cells (MSC), a crucial factor in tissue engineering, is highly dependent on glucose supply. The purpose of this paper is to study the potential of starch foams as glucose suppliers. It is investigated through in vitro hydrolysis by amyloglucosidase in conditions that respect physiological constraints (37 °C and pH 7.4), including a duration of 21 days, and no stirring. Nine extruded starch foams with amylose contents ranging from 0 to 74 %, with various cell wall thicknesses (50 to 300 μm), and different crystallinities (0-30 %) were hydrolysed. These kinetics were fitted by a model which shows that the maximum rate of hydrolysis varies from 7 to 100 %, and which allows the rate of hydrolysis at 21 days to be calculated precisely. The results reveal the major role of amylose in glucose delivery kinetics, and the secondary roles of crystallinity and cell wall thickness of the foams. Additional hydrolysis of starch films revealed that thickness positively influences the amylose chain reorganisation during hydrolysis, which, in slows down and limits glucose delivery. A simple glucose delivery kinetics analysis procedure is proposed to select samples for testing as MSC glucose suppliers.

Structure properties of Canna edulis RS3 (double enzyme hydrolysis) and RS4 (OS-starch and cross-linked starch): Influence on fermentation products and human gut microbiota

This study investigated the in vitro fermentation characteristics of different structural types of Canna edulis resistant starch (RS). RS3 was prepared through a double enzyme hydrolysis method, and RS4 (OS-starch and cross-linked starch) was prepared using octenyl succinic anhydride and sodium trimetaphosphate/sodium tripolyphosphate, respectively. The RS3 and RS4 samples were structurally analyzed using scanning electron microscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction analysis. This was followed by in vitro fermentation experiments. The results revealed microstructure differences in the two groups of starch samples. Compared to native starch, RS3 and RS4 exhibited a lower degree of order and endothermic energy, with lower crystallinity (RS3: 29.59 ± 1.11 %; RS4 [OS-starch]: 28.01 ± 1.32 %; RS4 [cross-linked starch]: 30.44 ± 1.73 %) than that in native starch (36.29 ± 0.89 %). The RS content was higher in RS3 (63.40 ± 2.85 %) and RS4 (OS-starch: 71.21 ± 1.28 %; cross-linked starch: 74.33 ± 0.643 %) than in native starch (57.71 ± 2.95 %). RS3 and RS4 exhibited slow fermentation rates, promoting the production of short-chain fatty acids. RS3 and cross-linked starch significantly increased the production of acetate and butyrate. Moreover, RS3 significantly promoted the abundance of Lactobacillus, while OS-starch and cross-linked starch significantly enhanced the abundance of Dorea and Coprococcus, respectively. Hence, the morphological structure and RS content of the samples greatly influenced the fermentation rate. Moreover, the different varieties of RS induced specific gut microbial regulation. Hence, they show potential applications in functional foods for tailored gut microbiota management.

Interaction between starch and dietary compounds: New findings and perspectives to produce functional foods

Due to the increased prevalence of overweight, obesity, diabetes, colon cancer, cardiovascular diseases, and metabolic syndrome, dietary approaches to reduce starch digestion and regulate glucose homeostasis have gained attention. Starch is a polysaccharide in most daily food consumed as bakery products, snacks, breakfast cereals, and pasta, which are often vilified. However, it is also present in beans, lentils, and oatmeal, which are considered healthy food products. The difference relays on the food matrix and the thermal process that can produce interactions between starch and dietary compounds (protein, lipid, non-starch polysaccharide, and bioactive compounds) or among starch chains (retrogradation). Such interactions produce structural changes so the digestive enzymes cannot hydrolyze them; additionally, the physical barrier of some macromolecules (proteins, hydrocolloids) restricts starch gelatinization and accessibility of the digestive enzymes to hydrolyze the starch. The interactions mentioned above and the use of some macromolecules as physical barriers could be explored as a pathway to develop functional foods. This review analyzes the interactions between starch and dietary compounds influenced by the processing of some food matrices to better understand their potential for developing functional foods.

Degradation of starch in pasta induced by extrusion below gelatinization temperature

The structural deformation of starch during pasta extrusion leads to varied effects on pasta quality. We investigated the impact of shearing force on the starch structure of pasta and pasta quality by varying the screw speed (100, 300, 500 and 600 rpm) with a temperature range of 25 to 50 ℃ in increments of 5 ℃, from the feeding zone to the die zone. The higher screw speeds were associated with more specific mechanical energy input (157, 319, 440, and 531 kJ/kg for pasta produced at 100, 300, 500 and 600 rpm, respectively), resulting in a lower pasting viscosity (1084, 813, 522 and 480 mPa·s for pasta produced at 100, 300, 500 and 600 rpm, respectively) in the pasta due to the loss of starch molecular order and crystallinity. Size-exclusion chromatography revealed that pasta produced at 600 rpm screw speed had a lower amylopectin size distribution which indicated molecular breakdown during extrusion. Pasta produced at 600 rpm had higher in vitro starch hydrolysis (both raw and cooked) than the pasta made at 100 rpm. The research provides relationship of how the screw speed can be manipulated to design pasta with varied texture and nutritional functionality.

Insights into the Supramolecular Structure and Degradation Mechanisms of Starch from Different Botanical Sources as Affected by Extrusion-based 3D Printing

Extrusion-based 3D printing has emerged as the most versatile additive manufacturing technique for the printing of practically any material. However, 3D printing of functional materials often activates thermo-mechanical degradation, which affects the 3D shape quality. Herein, we describe the structural changes of eight different starch sources (normal or waxy) as a consequence of the temperature of an extrusion-based 3D printing system through in-depth characterization of their molecular and structural changes. The combination of size-exclusion chromatography, small-angle X-ray scattering, X-ray diffraction, dynamic viscoelasticity measurements, and in vitro digestion has offered an extensive picture of the structural and biological transformations of starch varieties. Depending on the 3D printing conditions, either gelatinization was attained ("moderate" condition) or single-amylose helix formation was induced ("extreme" condition). The stiff amylopectin crystallites in starch granules were more susceptible to thermo-mechanical degradation compared to flexible amorphous amylose. The crystalline morphology of the starch varieties varied from B-type crystallinity for the starch 3D printing at the "moderate" condition to a mixture of C- and V-type crystallinity regarding the "extreme" condition. The "extreme" condition reduced the viscoelasticity of 3D-printed starches but increased the starch digestibility rate/extent. In contrast, the "moderate" condition increased the viscoelastic moduli, decreasing the starch digestion rate/extent. This was more considerable mainly regarding the waxy starch varieties. Finally, normal starch varieties presented a well-defined shape fidelity, being able to form a stable structure, whereas waxy starches exhibited a non-well-defined structure and were not able to maintain their integrity after printing. The results of this research allow us to monitor the degradability of a variety of starch cultivars to create starch-based 3D structures, in which the local structure can be controlled based on the 3D printing parameters.

Comparative study on the structural and in vitro digestion properties of starch within potato parenchyma cells under different cooking methods

To study the effects of cooking methods on the structure and digestion changes of starch encapsulated by cellular structure, intact potato parenchyma cells were successfully isolated and then subjected to different domestic cooking methods, including baking, frying, boiling, and autoclaving. The morphology, crystalline structure, thermal properties, and in vitro starch digestibility of cooked cell samples were investigated. Our results indicated that potato cell walls remained intact and performed as physical barriers preventing the diffusion/absorption of α-amylase to intracellular starch substrates after baking or frying treatment. However, boiling or autoclaving treatment destroyed cell wall structure, and the disrupted cellular structure reduced the digestion rate, likely by inhibiting diffusion of amylase through a weakened cell wall barrier, but could not lower the final digestion extent when compared to the pure starch. These findings suggested that potato products with lower glycemic index can be obtained by baking or frying treatment.

Optimization of ultrasound-assisted enzymatic extraction of resistant starch from green banana peels and its structural characterization

The global consumption of a large quantity of banana generates a huge quantity of banana peels which creates the problem of its disposal and proper management. The utilization of banana peels for the extraction of resistant starch can be a valuable strategy of waste valorization with economic viability at the industrial level. Green techniques like ultrasound can be efficacious in terms of increasing the extraction efficiency and yield of resistant starch. In this study, ultrasound assisted enzymatic extraction of resistant starch was optimized using response surface methodology. The optimum yield (60.6%) of resistant starch was obtained at 35 °C temperature, 30:1 liquid to solid ratio after a treatment time of 9 min. The results showed that a combination of ultrasound treatment with enzymatic extraction of resistant starch can be an efficient approach for the valorization of banana peels. Resistant starch holds application as a valuable supplement in functional food development in the fields of dairy, bakery, beverages, etc.

Assessment of physicochemical, rheological, and thermal properties of Indian rice cultivars: Implications on the extrusion characteristics

The implications of physicochemical, rheological, and thermal properties of seven eminent Indian rice cultivars (PR 114, 121, 122, 123, 124, 126, and 127) on the extrusion behavior and physico-functionalities of the extrudates were investigated. The amylose and amylopectin content of the cultivars ranged between 12.72 to 28.86% and 71.14 to 87.28% in addition with protein and crude fat content that varied from 7.05 to 9.15% and 0.49 to 1.17%, respectively. The onset (r = 0.98), peak (r = 0.95), and conclusion (r = 0.98) temperatures of the cultivars were in positive correlation with amylose. Likewise, pasting temperature (r = 0.979), final viscosity (r = 0.91), set back viscosity (r = 0.89), and stability ratio (r = 0.90) of the cultivars demonstrated a significant positive correlation with the amylose content. However, peak (r = - 0.879) and hold viscosity (r = - 0.89) were negatively correlated. The cultivars were extruded at feed moisture of 15%, screw speed of 500 rpm and barrel temperature of 150°C. The extrudates characteristics viz., expansion ratio-1.82 (PR 123); bulk density-184 g/cc (PR 123); specific mechanical energy-262.35 Wh/kg; water absorption index (WAI)-6.26 (PR 122); water solubility index-48.52% (PR 123); hardness-148.63 N (PR 122); and hydration power-284% (PR 122) were viably hyphenated with the physicochemical and rheological behavior of cultivars. The physico-functional characterization of the extrudates in terms of their starch and protein structural indexes, α-amylase susceptibility; water soluble carbohydrates and proteins revealed the possibility of exploring these cultivars as a functionally viable and diverse ingredient for the production of ready-to-eat extrudates.

High-amylose starch: Structure, functionality and applications

Starch with a high amylose (AM) content (high AM starch, HAS) has attracted increasing research attention due to its industrial application potential, such as functional foods and biodegradable packaging. In the past two decades, HAS structure, functionality, and applications have been the research hotspots. However, a review that comprehensively summarizes these areas is lacking, making it difficult for interested readers to keep track of past and recent advances. In this review, we highlight studies that benefited from rapidly developing techniques, and systematically review the structure, functionality, and applications of HAS. We particularly emphasize the relationships between HAS molecular structure and physicochemical properties.

Methods for characterizing the structure of starch in relation to its applications: a comprehensive review

Starch is a major part of the human diet and an important material for industrial utilization. The structure of starch granules is the subject of intensive research because it determines functionality, and hence suitability for specific applications. Starch granules are made up of a hierarchy of complex structural elements, from lamellae and amorphous regions to blocklets, growth rings and granules, which increase in scale from nanometers to microns. The complexity of these native structures changes with the processing of starch-rich ingredients into foods and other products. This review aims to provide a comprehensive review of analytical methods developed to characterize structure of starch granules, and their applications in analyzing the changes in starch structure as a result of processing, with particular consideration of the poorly understood short-range ordered structures in amorphous regions of granules.

Resistant starch type 2 from lotus stem: Ultrasonic effect on physical and nutraceutical properties

Resistant starch type 2 (RS) was isolated from lotus stem using enzymatic digestion method. The isolated RS was subjected to ultrasonication (US) at different sonication power (100-400 W). The US treated and untreated RS samples were characterized using dynamic light scattering (DLS), scanning electron microscopy (SEM), light microscopy and Fourier transform infrared spectroscopy (FT-IR). DLS revealed that particle size of RS decreased from 12.80 µm to 413.19 nm and zeta potential increased from -12.34 mV to -26.09 mV with the increase in sonication power. SEM revealed smaller, disintegrated and irregular shaped RS particles after ultrasonication. FT-IR showed the decreased the band intensity at 995 cm-1 and 1047 cm-1 signifying that US treatment decreased the crystallinity of RS and increased its amorphous character. The bile acid binding, anti-oxidant and pancreatic lipase inhibition activity of samples also increased significantly (p < 0.05) with the increase in sonication power. Increase in US power however increased the values of hydrolysis from 23.11 ± 1.09 to 36.06 ± 0.13% and gylcemic index from 52.39 ± 0.38 to 59.50 ± 0.11. Overall, the non-thermal process of ultrasonic treatment can be used to change the structural, morphological and nutraceutical profile of lotus stem resistant starch which can have great food and pharamaceutical applications.

Addition of chickpea markedly increases the indigestible carbohydrate content in semolina pasta as eaten

BACKGROUND

There is a growing interest in increasing dietary fiber (DF) consumption because of the health benefits associated with this nutrient. Pulses are considered a good source of non-digestible carbohydrates. The aim of this study was to investigate the possibility of substituting semolina with chickpea flour to increase indigestible carbohydrate content without altering the texture of the pasta.

RESULTS

Pasta was prepared by extruding semolina-chickpea blends. The protein and DF content in the cooked pasta increased with the chickpea level, with an important contribution of resistant starch (RS) to the DF values. The optimum cooking time decreased as the chickpea content increased, which was related to the degree of starch gelatinization of the raw pasta. The in vitro digestible starch content decreased with the chickpea substitution level, concomitant with the increase in RS content. In general, the texture of the chickpea-containing pasta was similar to that of semolina pasta.

CONCLUSIONS

Pending acceptability studies on these pastas may grant their promotion as good fiber sources, probably helpful in the fight against obesity and diet-related non-communicable diseases. © 2020 Society of Chemical Industry.

Relationship between molecular structure and lamellar and crystalline structure of rice starch

The relationship between molecular structure and crystalline and lamellar structures of fifteen types of rice starches was studied. GPC and HPAEC were used for the molecular chain analysis and WAXS, SAXS, and CP/MAS ¹³C NMR were employed for aggregation structural analysis. The amylopectin content and the average lengths of fb₁-chains (the degree of polymerization (DP) 13-24) were positively correlated with the amount of double helices (r² = 0.92 and 0.57, respectively). In contrast, amylose content was positively correlated with the amounts of amorphous materials in starch (r² = 0.77). The amount of double helices, which constitute a major part of the crystalline matrix, was positively correlated with the lamellar ordering (r² = 0.81), and negatively correlated with the thickness of crystalline lamellae (r² = 0.90) and lamellar repeat distance (r² = 0.84). Conversely, the amount of the amorphous matrix was correlated with these parameters in the opposite way (r² = 0.50, 0.75, and 0.75, respectively).

Food Matrix Effects for Modulating Starch Bioavailability

As the prevalence of obesity and diabetes has continued to increase rapidly in recent years, dietary approaches to regulating glucose homeostasis have gained more attention. Starch is the major source of glucose in the human diet and can have diverse effects, depending on its rate and extent of digestion in the small intestine, on postprandial glycemic response, which over time is associated with blood glucose abnormalities, insulin sensitivity, and even appetitive response and food intake. The classification of starch bioavailability into rapidly digestible starch, slowly digestible starch, and resistant starch highlights the nutritional values of different starches. As starch is the main structure-building macroconstituent of foods, its bioavailability can be manipulated by selection of food matrices with varying degrees of susceptibility to amylolysis and food processing to retain or develop new matrices. In this review, the food factors that may modulate starch bioavailability, with a focus on food matrices, are assessed for a better understanding of their potential contribution to human health. Aspects affecting starch nutritional properties as well as production strategies for healthy foods are also reviewed, e.g., starch characteristics (different type, structure, and modification), food physical properties (food form, viscosity, and integrity), food matrix interactions (lipid, protein, nonstarch polysaccharide, phytochemicals, organic acid, and enzyme inhibitor), and food processing (milling, cooking, and storage).

Interaction with longan seed polyphenols affects the structure and digestion properties of maize starch

This study investigated effects of longan seed polyphenols (LSPs) on the structure and digestion properties of starch, and discussed the interaction mechanism between starch and LSPs. The results showed cooking with 20 % LSPs did not change amylopectin chain length distribution of normal maize starch, however, the amylose content was reduced from 21.60 to 14.03 %. This suggests LSPs may interact with starch via non-covalent bond. Isothermal titration microcalorimetry and XRD results confirmed the existence of non-covalent interaction, and indicated that LSPs may enter the hydrophobic cavity of amylose, forming V-type inclusion complex. LSPs did not affect gelatinization temperatures of maize starch, whereas 20 % LSPs decreased the enthalpy change by about 26 %. The digestion results indicate significant inhibition effect of LSPs on the digestion of cooked starch, attributing to the interaction of LSPs with starch. These suggest potential applications of LSPs as functional ingredients in modulating postprandial glycemic response of starchy food.

Modulating the in vitro digestibility of chemically modified starch ingredient by a non-thermal processing technology of ultrasonic treatment

Chemically modified starch (RS4) was commercially available as a food ingredient, however, there was a lack of knowledge on how ultrasonic treatment (non-thermal technology) modulated the enzymatic resistance of RS4. In this study, structural change of RS4 during ultrasonic treatment and its resulting digestibility was investigated. Results from scanning electron microscopy, particle size analysis, chemical composition analysis, X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy showed that ultrasonic treatment remained the granule morphology, increased the apparent amylose content, reduced the particle size, destroyed the crystalline structure, decreased the helical orders, but enhanced the short-range molecular orders of ultrasonic-processed RS4. In vitro digestibility analysis showed that the total content of rapidly digestible starch and slowly digestible starch was increased, whereas the content of resistant starch was decreased. Overall, ultrasonic treatment substantially reduced the enzymatic resistance of RS4, indicating that RS4 was not stability against the non-thermal processing technology of ultrasonic treatment.

On the role of the internal chain length distribution of amylopectins during retrogradation: Double helix lateral aggregation and slow digestibility

A structure-digestion model is proposed to explain the formation of α-amylase-slowly digestible structures during amylopectin retrogradation. Maize and potato (normal and waxy) and banana starch (normal and purified amylopectin through alcohol precipitation), were analyzed for amylose ratio and size (HPSEC) and amylopectin unit- and internal-chain length distribution (HPAEC). Banana amylopectin (BA), like waxy potato (WP), exhibited a larger number of B3-chains, fewer BS- and B_fp-chains and lower S:L and BS:BL ratios than maize, categorizing BA structurally as type-4. WP exhibited a significantly greater tendency to form double helices (DSC and ¹³C-NMR) than BA, which was attributed to its higher internal chain length (ICL) and fewer DP6-12-chains. However, retrograded BA was remarkably more resistant to digestion than WP. Lower number of phosphorylated B-chains, more S- and B_fp-chains and shorter ICL, were suggested to result in α-amylase-slowly digestible structures through further lateral packing of double helices (suggested by thermo-rheology) in type-4 amylopectins.

Structural Basis of Resistant Starch (RS) in Bread: Natural and Commercial Alternatives

Bread is categorized as having a high amount of rapidly digested starch that may result in a rapid increase in postprandial blood glucose and, therefore, poor health outcomes. This is mostly the result of the complete gelatinization that starch undergoes during baking. The inclusion of resistant starch (RS) ingredients in bread formulas is gaining prominence, especially with the current positive health outcomes attributed to RS and the apparition of novel RS ingredients in the market. However, many RS ingredients contain RS structures that do not resist baking and, therefore, are not suitable to result in a meaningful RS increase in the final product. In this review, the structural factors for the resistance to digestion and hydrothermal processing of RS ingredients are reviewed, and the definition of each RS subtype is expanded to account for novel non-digestible structures recently reported. Moreover, the current in vitro digestion methods used to measure RS content are critically discussed with a view of highlighting the importance of having a harmonized method to determine the optimum RS type and inclusion levels for bread-making.

Physicochemical, microstructural and digestibility analysis of gluten-free spaghetti of whole unripe plantain flour

Plantain is a climacteric fruit having economic relevance in several tropical regions. Unripe plantain is an alternative source of indigestible carbohydrates (dietary fibre) and undigestible starch fraction. Unripe plantain flour was explored in this work as an alternative ingredient (whole and pulp) in spaghetti formulations. Chemical composition, cooking quality, texture analysis, and microstructure of spaghetti formulations were analyzed. The microstructure results showed that the presence of fiber in the food matrix helped the reduction of the starch granule swelling in the cooking process. Spaghetti made with whole plantain flour exhibited lower rapidly starch fraction, with increased resistant starch fractions. Overall, the whole unripe plantain flour exhibited good potential for gluten-free spaghetti having highest content of fiber and lower starch digestion rates.

Extruded Unripe Plantain Flour as an Indigestible Carbohydrate-Rich Ingredient

There is a growing interest in the development of functional ingredients, including those with high indigestible carbohydrate content. Unripe plantain flour (UPF) is a source of indigestible carbohydrates, type II resistant starch (RS) in particular. A major drawback of UPF, however, is that its RS content decreases sharply after wet heat treatment. Here, we explore the possibility of preparing an extruded UPF-based functional ingredient that retains limited starch digestibility features and high dietary fiber content. Both an unripe plantain pulp flour (UPFP) and a whole (pulp and peel) unripe plantain flour (UPFW) were prepared, extruded under identical conditions and evaluated for their gelatinization degree, total starch (TS), resistant starch (RS), and total dietary fiber (TDF) content; functional properties, such as pasting profile, water retention capacity, and solubility, and oil absorption index were also analyzed. The extruded functional ingredient was added to a yogurt and the rheological characteristics and in vitro starch digestibility of the product were evaluated. The extruded UPFW showed a lower gelatinization degree than the extruded UPFP, which may be due to the higher non-starch polysaccharide content of the former. A high TDF content was recorded in both extrudates (12.4% in UPFP and 18.5% in UPFW), including a significant RS fraction. The water retention capacity and solubility indices were higher in the extruded flours, particularly in UPFW, while only marginal differences in oil retention capacity were observed among the products. The addition of UPFP or UPFW (1.5 g TDF, w/v) to a yogurt did not alter the viscosity of the product, an important characteristic for the consumer's approval. Moreover, the composite yogurt showed a relatively low starch digestion rate. Extrusion of UPFs may be an alternative for the production of functional ingredients with important DF contents.

Controlled gelatinization of potato parenchyma cells under excess water condition: structural and in vitro digestion properties of starch

The starch digestion rate and extent of potato-based food were modulated through controlled gelatinization.

Banana starch and molecular shear fragmentation dramatically increase structurally driven slowly digestible starch in fully gelatinized bread crumb

The role of native (NB) and extruded (EB) banana starch, and a 1:1 native:extruded banana starch composite (MB), in slowing down the starch digestibility of bread crumb and crust was investigated. During extrusion, the molecular weight of banana starch was reduced from 2.75 × 10⁸ to 4.48 × 10⁶ g/mol (HPSEC-MALS-RI). Results showed a slowly digestible starch (SDS) increase from 1.09% (control) to 4.2, 6.6, and 7.76% in NB, MB and EB crumbs (fully gelatinized), respectively. DSC data attributed this occurrence to the formation of supramolecular structures upon storage involving amylopectin branches (especially those from fragmented amylopectin in EB). The hedonic sensory test showed no differences in overall liking between MB, EB and control, validating feasibility of including banana in the formulation. For the first time, this study shows a molecular size reduction as a strategy to manufacture selected starches that result in highly gelatinized baked products rich in structurally driven SDS.

Modeling Starch Digestograms: Computational Characteristics of Kinetic Models for in vitro Starch Digestion in Food Research

Starch digestion is mostly investigated with in vitro techniques, and time-course measurements are common. These yield digestograms that are modeled by theoretical, semitheoretical, and empirical kinetic equations, many of which are reviewed here. The Duggleby model has Michaelis-Menten functions, and its dependent variable is on both sides of the equation with no apparent parameter for maximum digestible starch (D_∞ ). The Gaouar and Peleg models are equivalent. They predict both the initial digestible starch (D₀ ) and D_∞ , and an average digestion rate, but they can reveal "biratial" digestions. The first-order kinetic model exhibits diverse predictabilities and, when linearized, D_∞ is sometimes equated to 100 g/100 g dry starch (100%), it yields an average rate of digestion and can predict negative D₀ . The log of slope (LOS) model is unique in revealing the rapid-to-slow digestion rate phenomenon, but without guidelines to identify such. The LOS model does not sometimes use all the digestogram data, can predict D_∞ greater than 100%, and returns zero digestion rate for some digestograms. However, some starchy materials exhibit a slow-to-rapid digestion rate phenomenon, as demonstrated with an example. The modified first-order kinetic model uses all the digestogram data with practical constraints (D₀  ≥ 0 g/100 g dry starch; D_∞  ≤ 100 g/100 g dry starch), describes all digestograms, and yields an average digestion rate, but it can also be used for "biratial" digestions. In addition, the logistic and Weibull models are discussed. Using some published data, the computational characteristics of these commonly used models are presented with objective parameters to guide choices.

Changes in crystal structure and physicochemical properties of potato starch treated by induced electric field

The effects of induced electric field (IEF) on the crystal structure and physicochemical properties of potato starch were investigated by subjecting identically treated control and electrically-modified samples to the same temperature history. Additionally, a method of combining IEF with heating for efficient modification of native polymer was also proposed. Results showed that the application of IEF at an electric voltage of 75V has a statistically significant effect on starch gelatinization and pasting properties, especially when combined with heating at 50°C. After treatment by the combination method for 96h, the gelatinization temperatures increased, which can be explained by the slight increase in the ratio of 1044/1015cm(-1) and relative crystallinity. Furthermore, IEF reduced granular swelling and therefore contributed to decreasing the peak, breakdown, and setback viscosity of potato starch. This study explores the potential of IEF as innovative technology for starch modification.