Extent of shielding by counterions determines the bactericidal activity of N,N,N-trimethyl chitosan salts

Development and challenges of antimicrobial peptide delivery strategies in bacterial therapy: A review

The escalating global prevalence of antimicrobial resistance poses a critical threat, prompting concerns about its impact on public health. This predicament is exacerbated by the acute shortage of novel antimicrobial agents, a scarcity attributed to the rapid surge in bacterial resistance. This review delves into the realm of antimicrobial peptides, a diverse class of compounds ubiquitously present in plants and animals across various natural organisms. Renowned for their intrinsic antibacterial activity, these peptides provide a promising avenue to tackle the intricate challenge of bacterial resistance. However, the clinical utility of peptide-based drugs is hindered by limited bioavailability and susceptibility to rapid degradation, constraining efforts to enhance the efficacy of bacterial infection treatments. The emergence of nanocarriers marks a transformative approach poised to revolutionize peptide delivery strategies. This review elucidates a promising framework involving nanocarriers within the realm of antimicrobial peptides. This paradigm enables meticulous and controlled peptide release at infection sites by detecting dynamic shifts in microenvironmental factors, including pH, ROS, GSH, and reactive enzymes. Furthermore, a glimpse into the future reveals the potential of targeted delivery mechanisms, harnessing inflammatory responses and intricate signaling pathways, including adenosine triphosphate, macrophage receptors, and pathogenic nucleic acid entities. This approach holds promise in fortifying immunity, thereby amplifying the potency of peptide-based treatments. In summary, this review spotlights peptide nanosystems as prospective solutions for combating bacterial infections. By bridging antimicrobial peptides with advanced nanomedicine, a new therapeutic era emerges, poised to confront the formidable challenge of antimicrobial resistance head-on.

Expanding the Scope of an Amphoteric Condensed Tannin, Tanfloc, for Antibacterial Coatings

Bacterial infections are a common mode of failure for medical implants. This study aims to develop antibacterial polyelectrolyte multilayer (PEM) coatings that contain a plant-derived condensed tannin polymer (Tanfloc, TAN) with inherent antimicrobial activity. Tanfloc is amphoteric, and herein we show that it can be used as either a polyanion or a polycation in PEMs, thereby expanding the possibility of its use in PEM coatings. PEMs are ordinarily formed using a polycation and a polyanion, in which the functional (ionic) groups of the two polymers are complexed to each other. However, using the amphoteric polymer Tanfloc with weakly basic amine and weakly acidic catechol and pyrogallol groups enables PEM formation using only one or the other of its functional groups, leaving the other functional group available to impart antibacterial activity. This work demonstrates Tanfloc-containing PEMs using multiple counter-polyelectrolytes including three polyanionic glycosaminoglycans of varying charge density, and the polycations N,N,N-trimethyl chitosan and polyethyleneimine. The layer-by-layer (LbL) assembly of PEMs was monitored using in situ Fourier-transform surface plasmon resonance (FT-SPR), confirming a stable LbL assembly. X-ray photoelectron spectroscopy (XPS) was used to evaluate surface chemistry, and atomic force microscopy (AFM) was used to determine the surface roughness. The LDH release levels from cells cultured on the Tanfloc-containing PEMs were not statistically different from those on the negative control (p > 0.05), confirming their non-cytotoxicity, while exhibiting remarkable antiadhesive and bactericidal properties against Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus), respectively. The antibacterial effects were attributed to electrostatic interactions and Tanfloc's polyphenolic nature. This work underscores the potential of Tanfloc as a versatile biomaterial for combating infections on surfaces.

Carbohydrate polymer-based nanocomposites for breast cancer treatment

Breast cancer is known as the most common invasive malignancy in women with the highest mortality rate worldwide. This concerning disease may be presented in situ (relatively easier treatment) or be invasive, especially invasive ductal carcinoma which is highly worrisome nowadays. Among several strategies used in breast cancer treatment, nanotechnology-based targeted therapy is currently being investigated, as it depicts advanced technological features able of preventing drugs' side effects on normal cells while effectively acting on tumor cells. In this context, carbohydrate polymer-based nanocomposites have gained particular interest among the biomedical community for breast cancer therapy applications due to their advantage features, including abundance in nature, biocompatibility, straightforward fabrication methods, and good physicochemical properties. In this review, the physicochemical properties and biological activities of carbohydrate polymers and their derivate nanocomposites were discussed. Then, various methods for the fabrication of carbohydrate polymer-based nanocomposites as well as their application in breast cancer therapy and future perspectives were discussed.

Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Quaternary ammonium N,N,N-trimethyl chitosan derivative and povidone‑iodine complex as a potent antiseptic with enhanced wound healing property

The importance of developing more potent antimicrobials and robust infection prevention practices has been highlighted recently with the increase in reports of emerging bacterial resistance mechanisms and the development of antibiotic-resistant microbes. In this study, a quaternary ammonium chitosan derivative, N,N,N-trimethyl chitosan chloride (TMC) with inherent bactericidal property was synthesized and complexed with povidone‑iodine (PVP-I) to create a potentially more potent antiseptic solution that could also significantly enhance the wound healing process. TMC, a positively charged, water-soluble derivative of chitosan, formed stable solutions with PVP-I at 5% w/v TMC concentration (TMC5/PVP-I). TMC5/PVP-I was significantly effective against multidrug-resistant bacteria S. aureus compared with PVP-I alone. TMC/PVP-I solutions also showed fungicidal property against C. albicans, with no cytotoxic effects when tested against human fibroblast cells cultured in vitro. Wound healing assessment in vivo revealed early collagen formation and re-epithelialization for TMC5/PVP-I treated wounds in rats relative to control and PVP-I only. Formulation of TMC/PVP-I solutions presented in the study can be easily adapted in the existing production of commercial PVP-I creating a new product with more potent bactericidal and enhanced wound healing properties for optimal wound care.

Computational evidence for nitro derivatives of quinoline and quinoline N-oxide as low-cost alternative for the treatment of SARS-CoV-2 infection

A new and more aggressive strain of coronavirus, known as SARS-CoV-2, which is highly contagious, has rapidly spread across the planet within a short period of time. Due to its high transmission rate and the significant time–space between infection and manifestation of symptoms, the WHO recently declared this a pandemic. Because of the exponentially growing number of new cases of both infections and deaths, development of new therapeutic options to help fight this pandemic is urgently needed. The target molecules of this study were the nitro derivatives of quinoline and quinoline N-oxide. Computational design at the DFT level, docking studies, and molecular dynamics methods as a well-reasoned strategy will aid in elucidating the fundamental physicochemical properties and molecular functions of a diversity of compounds, directly accelerating the process of discovering new drugs. In this study, we discovered isomers based on the nitro derivatives of quinoline and quinoline N-oxide, which are biologically active compounds and may be low-cost alternatives for the treatment of infections induced by SARS-CoV-2.

Novel poly(ε-caprolactone)/amino-functionalized tannin electrospun membranes as scaffolds for tissue engineering

Poly(ε-caprolactone) (PCL) is a hydrophobic and cytocompatible aliphatic polyester that has been used to produce PCL-based nanofibrous for both wound healing and tissue repair. However, the high hydrophobicity and low water adsorptive have been challenges for developing PCL-based materials for use in tissue engineering field. Here, we report a new polymer (a hydrophilic amino-functionalized tannin (TN)) that is associated with PCL for developing PCL-TN blends at different PCL:TN weight ratios (100:0, 95:5, 85:15 and 78:22). PCL:TN ratio may be tuned to modulate hydrophilicity and cytocompatibility of the nanofibers. The neutralization step and surface wettability played an important role in the attachment of human adipose-derived stem cells (ADSC cells) on PCL-TN membranes. Also, fluorescence images confirmed great proliferation of ADSC cells on the PCL-TN electrospun surfaces. Yet, neutralized PCL-TN nanofibers promoted bactericidal activity against Pseudomonas aeruginosa. These membranes have potential to be used as scaffolds for tissue engineering purposes.

Cellulose nanowhiskers decorated with silver nanoparticles as an additive to antibacterial polymers membranes fabricated by electrospinning

Antimicrobial films based on distinct polymer matrices, poly (vinyl alcohol) (PVA) or poly (N-isopropylacrylamide) (PNIPAAm), and silver nanoparticles (AgNPs) immobilized onto cellulose nanowhiskers (CWs) were successfully prepared by either casting or electrospinning. CWs were first functionalized with carboxylate groups (labeled as CWSAc) and later they were immersed in a silver nitrate solution (AgNO₃). After Ag⁺ ions anchored in the COO^- groups are chemically reduced to produce AgNPs. The CWSAc/AgNPs biological activity was evaluated against Staphylococcus aureus (S. aureus), Bacillus Subtilis (B. subtilis), Escherichia coli (E. coli), and Candida albicans (C. albicans). The materials were more effective against C. albicans that showed a MIC of 15.6 µg/mL. In the process of AgNPs synthesis, the activity of the stabilizing agent (gelatin) and concentration of precursor and reducing agents were evaluated. The synthesized polymeric films displayed good antimicrobial activity against S. aureus, E. coli, and Pseudomonas aeruginosa (P. aeruginosa) bacteria. The PVA films with CWSAc/AgNPs showed diameter of the inhibition halo of up to 11 mm. The results obtained displayed that the films obtained have a potential application to be used in different fields such as packaging, membrane filtration, wound dressing, clothing and in different biomedical applications.

Synthesis, characterization, and the antioxidant activity of N,N,N-trimethyl chitosan salts

Chitosan, possessing excellent properties, has been drawing broad attention. For the further utilization of chitosan, chemical modification is performed in improving its water solubility and the bioactivities. In the current study, four N,N,N-trimethyl chitosan salts, including N,N,N-trimethyl chitosan citrate (TMCSCi), N,N,N-trimethyl chitosan acetylsalicylate (TMCSAc), N,N,N-trimethyl chitosan ascorbate (TMCSAs), and N,N,N-trimethyl chitosan gallate (TMCSGa), were prepared via N,N,N-trimethyl chitosan iodide (TMCSI). The as-prepared products were characterized by FT-IR and ¹H NMR. Meanwhile, the degrees of substitution were calculated by elemental analysis results. Furthermore, scavenging activities (against DPPH radicals and superoxide radicals) test and reducing power test were selected to evaluate the antioxidant property of N,N,N-trimethyl chitosan salts in vitro. The results indicated that TMCSAs and TMCSGa displayed excellent activity, probably due to the enhancement of ascorbate and gallate in antioxidant activity. However, because of the weak antioxidant property of citrate and acetylsalicylate, the activity was lower for TMCSCi and TMCSAc. For example, in the DPPH radicals scavenging assay, the scavenging rates of chitosan, TMCSI, TMCSCi, TMCSAc, TMCSAs, and TMCSGa were 25.22, 84.11, 6.90, 2.70, 94.92, and 96.75% at 0.4 mg/mL, respectively. Generally, TMCSAs and TMCSGa could be regarded as a potential source of antioxidants.

Multifunctional hybrid aerogels: hyperbranched polymer-trapped mesoporous silica nanoparticles for sustained and prolonged drug release

In this study, we show the synthesis of novel hybrid organic-inorganic aerogel materials with one-dimensionally aligned pores and demonstrate their use as sustained and prolonged release systems for a hydrophobic drug. The materials are synthesized by trapping mesoporous silica nanoparticles within a hyperbranched polymer network made from poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA). The synthetic method involves dispersing mesoporous silica nanoparticles in a polymer solution, then freeze-drying the solution, and finally subjecting the resulting materials to high temperature to activate a solid-state condensation reaction between PVA and PAA. Before trapping the mesoporous silica nanoparticles within the hyperbranched polymeric network, their pores are decorated with hydrophobic groups so that they can serve as good host materials for hydrophobic drugs. The potential application of the hybrid aerogels as drug carriers is demonstrated using the hydrophobic, anti-inflammatory agent dexamethasone (DEX) as a model drug. Due to their hydrophobic pores, the hybrid aerogels show excellent drug loading capacity for DEX, with an encapsulation efficiency higher than 75%. Furthermore, the release pattern of the payloads of DEX encapsulated in the aerogels is highly tailorable (i.e., it can be made faster or slower, as needed) simply by varying the PVA-to-PAA weight ratio in the precursors, and thus the 3-dimensional (3-D) structures of the cross-linked polymers in them. The materials also show sustained drug release, for over 50 days or more. In addition, the aerogels are biocompatible, as demonstrated with Vero cells, and greatly promote the cell proliferation of L929 fibroblasts. Also, the nanoparticles functionalized with quaternary groups and dispersed within the aerogels display bactericidal activity against E. coli, S. aureus, B. subtilis, and P. aeruginosa. These new hybrid aerogels can, thus, be highly appealing biomaterials for sustained and prolonged drug release, such as wound dressing systems.

Polyelectrolyte complexes based on alginate/tanfloc: Optimization, characterization and medical application

Hydrogels based on alginate and tanfloc (a cationic biopolymer obtained from natural condensed tannins) were successfully prepared. Tanfloc (TN) presents high aqueous solubility at pHs lower than 10; it contains substituted amino sites and molar weight of ca. 600,000gmol^-1. A factorial design (2²) was used to optimize the yield of alginate/tanfloc polyelectrolyte complexes (PECs). Dialysis recovered the overplus of alginate (AG) no complexed with TN. These materials were characterized by thermal analyses (TGA/DTG and DSC), zeta potential, and FTIR, while SEM technique depicted a rough surface on AG/TN complex, containing non-homogeneous pores. Indeed, the AG and TN were tailored to elicit scaffold materials with outstanding cytocompatibility, mainly upon mouse preosteoblastic cells because of reconstruction of bone tissues (119% at 10days). The AG/TN complex also displayed antioxidant and bactericidal activities against Staphylococcus aureus (S. aureus). Besides, the pristine TN fostered bacteriostatic and bactericidal performances towards S. aureus and Escherichia coli. However, for our best knowledge, no studies were still carried out on TN and TN-based materials for medical purpose.