Structure, morphology and properties of genipin-crosslinked carboxymethylchitosan porous membranes

Preparation of Emamectin Benzoate·Hexaflumuron Granules Based on Response Surface Methodology

In order to obtain particles with an optimal loading rate and encapsulation efficiency and to explore the effects of sodium alginate, carboxymethyl chitosan, and bentonite on the particle loading rate and encapsulation rate, the preparation parameters of particles were optimized by the response surface method. A series of particles with constantly changing components were prepared, and the particle loading rate and encapsulation rate were determined. The release experiment of granules in different mass release media was implemented, and the optimal loading rate and encapsulation efficiency of particles were used to control the fall armyworm (FAW). The results showed that when the amount of sodium alginate was 1.83%, that of carboxymethyl chitosan was 0.41% and that of bentonite was 0.37%. The maximum theoretical value based on the response surface simulation was 92.63%, and the actual value at this ratio was 91.61%, which was 98.90% of the theoretical value. The release assay indicated that the mechanism of particle release in 2, 4, and 6 mL of the release medium was non-Fickian diffusion, and the controlled mechanism in 25 mL of the medium was Fickian diffusion. The beads were spread directly into maize leaf whorls in field production; at 14 days after application, the efficacy reached 91.28-98.82%. The combination of emamectin benzoate and hexaflumuron granules has a good control effect on the FAW.

A biodegradable oxidized starch/carboxymethyl chitosan film coated with pesticide-loaded ZIF-8 for tomato fusarium wilt control

Film mulching is one of the most important methods to control soil-borne diseases. However, the traditional mulch may cause microplastic pollution and soil ecological damage. Herein, a biodegradable film was developed using oxidized starch and carboxymethyl chitosan and incorporated ZIF-8 carrying fludioxonil to sustainably control soil-borne disease. The microstructure, mechanical properties, optical properties, and water barrier properties of the composite films (Flu@ZIF-8-OS/CMCS) were investigated. The results show that Flu@ZIF-8-OS/CMCS had a smooth and uniform surface and excellent light transmittance. The excellent mechanical properties of the films were verified by tensile strength, elongation at break and Young's modulus. Higher contact angle and lower water vapor permeability indicate water retention capacity of the soil was improved through using Flu@ZIF-8-OS/CMCS. Furthermore, the release properties, biological activity, degradability and safety to soil organisms of Flu@ZIF-8-OS/CMCS was determined. The addition of ZIF-8 significantly improved the film's ability to retard the release of Flu, while the Flu@ZIF-8-OS/CMCS has good soil degradability. In vitro antifungal assays and pot experiments demonstrated excellent inhibitory activity against Fusarium oxysporum f. sp. Lycopersici. Flu@ZIF-8-OS/CMCS caused only 13.33 % mortality of earthworms within 7 d. This research provides a new approach to reducing microplastic pollution and effectively managing soil-borne diseases.

Chitosan-based nanopesticides enhanced anti-fungal activity against strawberry anthracnose as "sugar-coated bombs"

A chitosan-based nanoparticle was prepared using chitosan (CS) and O-carboxymethyl chitosan (O-CMCS). Our study revealed that chitosan/O-carboxymethyl chitosan/tebuconazole nanoparticles (CS/O-CMCS/TBA NPs) exhibited superior antifungal activity, foliar adhesion, and microbial target adhesion performance compared to commercial suspension concentrate (SC). The antifungal activity of CS/O-CMCS/TBA NPs against C. gloeosporioides, with a 3.13-fold increase in efficacy over TBA (SC). We also found that low concentrations of CS/O-CMCS NPs promoted the growth of C. gloeosporioides and enhanced the fungal catabolism of chitosan. Overall, the CS/O-CMCS/TBA NPs were found to possess the remarkable capability to selectively aggregate around pathogenic microorganisms and CS/O-CMCS NPs can enhance the fungal catabolism of chitosan. CS/O-CMCS/TBA NPs, as a "sugar-coated bomb", was a promising asset for effective plant disease management and pesticide utilization through the affinity of chitosan-based nanoparticles and C. gloeosporioides, enabling targeted delivery and targeted release of their encapsulated active ingredient, which was important for the development and application of biocompatible chitosan-based nanopesticides.

Double network structure via ionic bond and covalent bond of carboxymethyl chitosan and poly(ethylene glycol): Factors affecting hydrogel formation

The factors were studied that affect the formation of DN hydrogel, which was prepared using a water-based, environmental-friendly system. The DN hydrogel was designed and prepared based on a cross-linked, polysaccharide-based, polymer carboxymethyl chitosan (CMCS) via an ionic crosslinking reaction for the first network structure. UV irradiation created a radical crosslinking reaction of poly(ethylene glycol) from a double bond at the chain end for the second network structure. It was found that the optimum hydrogel was produced using 9.5 %v/v of 1000PEGGMA, CMCS 5%w/v, and CaCl₂ 3%w/v. The results showed the highest percentage of the gel fraction was 87.84 % and the hydrogel was stable based on its rheological properties. Factors affecting the hydrogel formation were the concentration and molecular weight of PEGGMA and the concentrations of CMCS and calcium chloride (CaCl₂). The DN hydrogel had bioactivity due to its octacalcium phosphate (OCP) hydroxyapatite crystal form. In addition, the composite DN scaffold with a conductive polymer of chitosan-grafted-polyaniline (CS-g-PANI) had conduction of 2.33 × 10^-5 S/cm when the concentration of CS-g-PANI was 3 mg/ml, confirming the semi-conductive nature of the material. All the results indicated that DN hydrogel could be a candidate to apply in tissue-engineering applications.

Synthesis and fluorescent property of carboxymethyl chitosan with different degrees of carboxymethylation and its application for fluorescence turn-on detection of Cd(II) ion

Recently, carboxymethyl chitosan (CMCS) has proved to be an intrinsically fluorescent material with aggregation-induced emission characteristic. In order to elucidate the influence of CMCS's chemical structure and solution behavior on its fluorescent intensity, two series of CMCS with different degrees of carboxymethylation (DCM) are synthesized by adjusting the mass ratio of monochloroacetic acid and sodium hydroxide to chitosan at various reaction temperature and time, and then characterized using Fourier-transform infrared spectroscopy and nuclear magnetic resonance. Their solution behaviors at different pH values are studied via zeta potential and ultraviolet-visible measurements. The data reveal that the isoelectronic point (IEP) of a CMCS decreases with increasing DCM, and all the CMCSs have good water solubility at pH range below their IEPs. Fluorescence spectra indicate that a CMCS shows the highest fluorescent intensity in a slightly acidic environment next to its IEP, and the photoluminescence of a CMCS solution increases significantly after heat treatment above T = 70 °C. Furthermore, we compare for the first time the use of heated CMCS solutions for the fluorescence turn-on detection of cadmium ion in pure and tap water, respectively. The limit of detection is found to be ca. 1 μM for the Cd2+ in pure water.

Carboxymethyl chitosan regulates oxidative stress and decreases the expression levels of tumor necrosis factor α in macrophages induced by wear particles

The aim of the present study was to determine the effects of carboxymethyl chitosan (CMC) on titanium particles-induced oxidative stress in mouse RAW264.7 macrophages. The mouse RAW264.7 macrophages were divided into four groups: (i) the control group; (ii) the CMC group received stimulation of CMC for 4 h; (iii) the titanium particles group received stimulation of titanium particles for 12 h; and (iv) the CMC group received pre-stimulation of CMC hydrogels for 4 h followed by treatment of titanium particles for 12 h. Afterwards, reactive oxygen species (ROS) level in the cells was measured by flow cytometry. A spectrophotometer was used to measure the activities of oxidases and antioxidant enzymes. Fluorescence quantitative PCR was performed to analyze mRNA levels of enzymes and tumor necrosis factor α (TNF-α). ELISA was used to detect the mass concentration of TNF-α after indicated treatment. CMC effectively suppressed titanium particles-induced oxidative stress in RAW264.7 cells, as evidenced by the decrease in intracellular ROS level, the transcription of oxidases, and TNF-α concentration as well as the increase in the transcription of antioxidant enzymes. CMC exerts a protective impact against wear particles-induced oxidative stress and reduces the release of TNF-α in RAW264.7 cells.

Minimally invasive bone augmentation through subperiosteal injectable hydroxylapatite/laponite/alginate nanocomposite hydrogels

Bone augmentation has an enormous demand in oral clinical treatment. Although there are various options available for clinical management to address it, these approaches could increase patient suffering due to surgical trauma and even cause psychological trauma to the patients. Moreover, presently, there is still a lack of well-considered microinvasive bone augmentation systems to deal with this challenge. Herein, we newly developed a subperiosteal injectable and osteogenesis-promoting hydroxylapatite/laponite/alginate nanocomposite hydrogels to address the insufficient microinvasive bone augmentation strategies. The physical performances (like swelling profiles, degradation behaviors, mechanical properties, and surface morphologies) of the gels were determined, and can be slightly tuned through altering concentrations of laponite. The cytocompatibility test results show outstanding biocompatibility of the hydrogels. Furthermore, the in vitro testing for bone-inducing activity and in vivo determination of bone-augmentation in the rat cranial subperiosteum exhibit that the hydrogels significantly promoted rat periosteum-derived mesenchymal stromal cells (P-MSCs) osteogenic differentiation in vitro and bone augmentation in vivo. Therefore, the research reveals that the nanocomposite hydrogels possessing subperiosteal microinvasive injectability, osteogenesis-enhancing capability, and clinical applicability have extremely great potential application in subperiosteal microinvasive bone augmentation.

Carboxymethyl chitosan reduces inflammation and promotes osteogenesis in a rabbit knee replacement model

BACKGROUND

The major causes of failure after total knee arthroplasty (TKA) include prosthesis loosening and infection. This study aimed to investigate the role of carboxymethyl chitosan (CMC) in knee arthroplasty.

METHODS

A total of 20 New Zealand white rabbits that were divided into two groups (10 in the control group and 10 in the chitosan group) were included in the study. They underwent TKA surgery, and all were implanted with titanium rod prostheses; the prosthesis in the chitosan group was coated with CMC. After 12 weeks, all rabbits were euthanized, and the following analyses of some specific surface membrane tissues around the prosthesis were performed: X-ray analysis; micro-computed tomography scan; haematoxylin and eosin, Van Gieson, and Von Kossa staining; reverse transcription polymerase chain reaction; and Western Blotting.

RESULTS

The result of CCK8 test showed CMC can promote cell proliferation and increase cell viability. Radiological result showed better amount of bone deposits and more bone formation in the chitosan group. HE staining result showed CMC reduces inflammation around the prosthesis. The VG and Von Kossa staining results showed CMC can promote bone deposition around prosthesis. And according to the results of PCR and WB, the OCN content was higher in the chitosan group, while the MMPs content was lower. The chitosan group has an increased OPG/RANKL ratio than the control group.

CONCLUSION

CMC can effectively inhibit the inflammatory response around the prosthesis and osteoclast activation and promote osteogenesis by interfering with the osteoprotegerin/receptor activator of nuclear factor kappa-Β ligand/receptor activator of nuclear factor kappa-Β signalling pathway.

Tuning the properties of carboxymethylchitosan-based porous membranes for potential application as wound dressing

Wound repair is a complex process that calls for strategies to allow a rapid and effective regeneration of injured skin, which has stimulated the research of advanced wound dressings. Herein, highly porous membranes of N,O-carboxymethylchitosan (CMCh), and poly (vinyl alcohol) (PVA) were successfully prepared via a green and facile freeze-drying method of blend solutions containing CMCh/PVA at weight ratio 25/75. Membranes composed only by CMCh were also prepared and genipin was used for crosslinking. Different contents of TiO₂ nanoparticles were incorporated to both type of membranes, which were characterized in terms of morphology, porosity (Φ), swelling capacity (S.C.), mechanical properties, susceptibility to lysozyme degradation and in vitro cytotoxicity toward human fibroblast (HDFn) and keratinocytes (HaCaT) cells. Larger apparent pores were observed in the surface of the genipin-crosslinked CMCh membrane, which resulted in higher porosity (Φ ≈ 76%) and swelling capacity (S.C. ≈ 1720%) as compared to CMCh/PVA membrane (Φ ≈ 68%; S.C. ≈ 1660%). The porosity of both types of membranes decreased upon the addition of TiO₂ nanoparticles while swelling capacity increased. Due to their high porosity and swelling capacity, adequate mechanical properties, controlled degradability, and cytocompatibility, such carboxymethylchitosan-based membranes are potentially useful as wound dressings.

Superior removal of inorganic and organic arsenic pollutants from water with MIL-88A(Fe) decorated on cotton fibers

Arsenic contamination has attracted worldwide concerns, owing to its toxicity and severe threat to human and environment. It is urgent to develop efficient adsorbents to remove arsenic pollutants. Within this paper, both pristine MIL-88A(Fe) and MIL-88A(Fe) decorated on cotton fibers were successfully fabricated using an eco-friendly method. The pristine MIL-88A(Fe) displayed outstanding adsorption performances towards four selected arsenic pollutants, in which the adsorption capacities toward As(III), As(V), ROX and ASA were 126.5, 164.0, 261.4 and 427.5 mg g^-1, respectively. Additionally, MIL-88A(Fe) exhibited excellent removal efficiencies in a wide pH range and with the presence of different co-existing ions. It was proposed that the coordinative interactions of As-O-Fe between arsenic pollutants and MIL-88A(Fe) contributed to the superior adsorption performances. Furthermore, two MIL-88A(Fe)/cotton fibers composites were synthesized by both post synthesis (MC-1) and in-situ synthesis (MC-2), which demonstrated identically outstanding adsorption activities toward four selected arsenic pollutants. MC-1 and MC-2 enhanced the stability and reusability of MIL-88A(Fe), which was challenging issues of pristine MIL-88A(Fe) powder. Additionally, the fixed-bed column packed by MC-1 or MC-2 can continuously eliminate arsenic pollutants from the water flow. This work provided a new possibility of metal-organic frameworks to accomplish potentially large-scale application to purify the arsenic-contaminated water.

Biotransformation of (E)-2-Methyl-3-Phenylacrylaldehyde Using Mycelia of Penicillium citrinum CBMAI 1186, Both Free and Immobilized on Chitosan

This study applied the use of marine-derived fungus Penicillium citrinum CBMAI 1186 in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde 1. The fungus immobilized on chitosan, obtained by multistep ultrasound-assisted deacetylation process (Ch-USAD), produced the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 49%, 40% ee) isomer and (±)-2-methyl-3-phenylacrilic acid 4 (c = 35%); in contrast, immobilized mycelia on commercial chitosan (Ch-C) yielded the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 48%, 10% ee) and (±)-2-methyl-3-phenylpropanal 1a (c = 41%). The reaction using free mycelia gave a 40% yield of (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 with 10% ee. These results showed that the crystallinity form and molecular weight of chitosan (Ch-C or Ch-USAD) used to immobilized mycelia of P. citrinum CBMAI 1186 influenced in the biotransformation of (E)-2-methyl-3-phenylacrylaldehyde 1. Therefore, marine-derived fungus P. citrinum CBMAI 1186 immobilized on chitosan can be a potential alternative in the studies of hydrogenation of the α,β-unsaturated carbon-carbon (α,β-C=C) double bond. Marine-derived fungus Penicillium citrinum CBMAI 1186 immobilized on chitosan in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde.

Wound healing and antimicrobial effect of active secondary metabolites in chitosan-based wound dressings: A review

Wound healing can lead to complex clinical problems, hence finding an efficient approach to enhance the healing process is necessary. An ideal wound dressing should treat wounds at reasonable costs, with minimal inconveniences for the patient. Chitosan is one of the most investigated biopolymers for wound healing applications due to its biocompatibility, biodegradability, non-toxicity, and antimicrobial activity. Moreover, chitosan and its derivative have attracted numerous attentions because of the accelerating wound healing, and easy processability into different forms (gels, foams, membranes, and beads). All these properties make chitosan-based materials particularly versatile and promising for wound dressings. Besides, secondary natural metabolites could potentially act like the antimicrobial and anti-inflammatory agents and accelerate the healing process. This review collected almost all studies regarding natural compounds applications in wound healing by focusing on the chitosan-based bioactive wound dressing systems. An accurate analysis of different chitosan formulations and the influence of bioactive compounds on their wound healing properties are reported.

Transglutaminase-catalyzed preparation of crosslinked carboxymethyl chitosan/carboxymethyl cellulose/collagen composite membrane for postsurgical peritoneal adhesion prevention

Peritoneal adhesion is a general complication following pelvic and abdominal surgery, which may lead to chronic abdominal pain, bowel obstruction, organ injury, and female infertility. Biodegradable polymer membranes have been suggested as physical barriers to prevent peritoneum adhesion. In this work, a transglutaminase (TGase)-catalyzed crosslinked carboxymethyl chitosan/carboxymethyl cellulose/collagen (CMCS/CMCL/COL) composite anti-adhesion membrane with various proportions of CMCS, CMCL, and COL (40/40/20, 35/35/30, 25/25/50) was developed. After crosslinking by TGase, the composite anti-adhesion membranes shown enhanced mechanical properties and improved biodegradability. Meanwhile, the high cytocompatibility of anti-adhesion membranes was proved by in vitro cell culture study. Moreover, the anti-adhesion membrane with the proportion of 25/25/50 was implanted between the artificially defected cecum and peritoneal wall in rats and following by general observation, histological examination, and inflammatory factors assay. The results indicated that the anti-adhesion membrane can significantly prevent peritoneal adhesion with negligible immunogenicity. Therefore, the composite membrane crosslinked by TGase had satisfactory anti-adhesive effects with high biocompatibility and low antigenicity, which could be used as a preventive barrier for peritoneal adhesion.

Biotransformation of Geniposide into Genipin by Immobilized Trichoderma reesei and Conformational Study of Genipin

Trichoderma reesei QM9414, Trichoderma viride 3.316, Aspergillus niger M85, and Aspergillus niger M92 were screened for hydrolyzing geniposide into genipin. T. reesei was selected according to the β-glucosidase activity of the fermentation broths using geniposide as a substrate. T. reesei was immobilized by embedding method using sodium alginate as the carrier. Geniposide was hydrolyzed by immobilized T. reesei at 28°C (200 rpm) for 34 h, and the yield of genipin was 89%. The product was purified and identified by UV, IR, EIMS, and ¹H-NMR. Since there were two sets of signals in ¹H-NMR spectra, a series of experiments were performed and verified that the existence of two conformations was the main reason. Generally, biotransformation of geniposide into genipin by immobilized T. reesei provides a promising solution to the genipin production.