Synthesis, characterization and drug release properties of 3D chitosan/clinoptilolite biocomposite cryogels

Evaluation of reproducible cryogel preparation based on automated image analysis using deep learning

Cryogels represent a class of porous sponge-like materials possessing unique properties including high-fidelity reproduction of tissue structure and maximized permeability. Their architecture is mainly based on an interconnected network of macropores that provides sufficient stability while allowing the movement of substances through the material. In most cryogel applications, the pore size is very important, especially when the material is used as a 3D scaffold for tissue culture, applied as a filter, or utilized as a membrane. In this study, poly(dimethylacrylamide-co-2-hydroxyethyl methacrylate) cryogels have been prepared by two preparation methods to investigate the reproducibility of homogeneous pore structures and pore sizes. Automated image analysis algorithms were developed to rapidly evaluate cryogel pore sizes based on scanning electron microscopy (SEM) images. The quantification approach contained a unique combination of classical and deep learning-based algorithms. To validate the accuracy of the two models, we compared the results obtained from automated SEM image analysis with those from manual pore size determinations and mercury intrusion porosimetry (MIP) measurements. Effect sizes were calculated to compare the results from manual and automated pore size measurements for the cryogel reproducibility series. 81% of the values obtained revealed only trivial differences, which strongly suggests that automated image analysis can reliably substitute the manual evaluation of cryogel pore sizes. The use of an adapted reactor setup yielded cryogels with heterogeneous morphologies in the absence of recognizable pore structures. With the conventional cryogel preparation using plastic syringes, the obtained cryogels represented highly reproducible morphologies and pore sizes in the range between 17 and 22 μm. Calculated effect sizes within the cryogel replicate series revealed only trivial differences between the obtained pore sizes in 83.5% or 99.4% of the data (classical approach and deep learning-based approach, respectively).

Cryogels: Advancing Biomaterials for Transformative Biomedical Applications

Cryogels, composed of synthetic and natural materials, have emerged as versatile biomaterials with applications in tissue engineering, controlled drug delivery, regenerative medicine, and therapeutics. However, optimizing cryogel properties, such as mechanical strength and release profiles, remains challenging. To advance the field, researchers are exploring advanced manufacturing techniques, biomimetic design, and addressing long-term stability. Combination therapies and drug delivery systems using cryogels show promise. In vivo evaluation and clinical trials are crucial for safety and efficacy. Overcoming practical challenges, including scalability, structural integrity, mass transfer constraints, biocompatibility, seamless integration, and cost-effectiveness, is essential. By addressing these challenges, cryogels can transform biomedical applications with innovative biomaterials.

Zeolites as Ingredients of Medicinal Products

Development of new medicinal products for particular therapeutic treatment or for better manipulations with better quality and less side effects are possible as a result of advanced inorganic and organic materials application, among which zeolites, due to their properties and versatility, have been gaining attention. This paper is an overview of the development in the use of zeolite materials and their composites and modifications as medicinal products for several purposes such as active agents, carriers, for topical treatments, oral formulations, anticancer, the composition of theragnostic systems, vaccines, parenteral dosage forms, tissue engineering, etc. The objective of this review is to explore the main properties of zeolites and associate them with their drug interaction, mainly addressing the advances and studies related to the use of zeolites for different types of treatments due to their zeolite characteristics such as molecule storage capacity, physical and chemical stability, cation exchange capacity, and possibility of functionalization. The use of computational tools to predict the drug-zeolite interaction is also explored. As conclusion was possible to realize the possibilities and versatility of zeolite applications as being able to act in several aspects of medicinal products.

Chitosan Sponges with Instantaneous Shape Recovery and Multistrain Antibacterial Activity for Controlled Release of Plant-Derived Polyphenols

Biomass-derived materials with multiple features are seldom reported so far. Herein, new chitosan (CS) sponges with complementary functions for point-of-use healthcare applications were prepared by glutaraldehyde (GA) cross-linking and tested for antibacterial activity, antioxidant properties, and controlled delivery of plant-derived polyphenols. Their structural, morphological, and mechanical properties were thoroughly assessed by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and uniaxial compression measurements, respectively. The main features of sponges were modulated by varying the CS concentration, cross-linking ratio, and gelation conditions (either cryogelation or room-temperature gelation). They exhibited complete water-triggered shape recovery after compression, remarkable antibacterial properties against Gram-positive (Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes)) and Gram-negative (Escherichia coli (E. coli), Salmonella typhimurium (S. typhimurium)) strains, as well as good radical scavenging activity. The release profile of a plant-derived polyphenol, namely curcumin (CCM), was investigated at 37 °C in simulated gastrointestinal media. It was found that CCM release was dependent on the composition and the preparation strategy of sponges. By linearly fitting the CCM kinetic release data from the CS sponges with the Korsmeyer-Peppas kinetic models, a pseudo-Fickian diffusion release mechanism was predicted.

Chitosan-Based Polyelectrolyte Complex Cryogels with Elasticity, Toughness and Delivery of Curcumin Engineered by Polyions Pair and Cryostructuration Steps

Chitosan (CS)-based drug delivery systems (DDSs) are often stabilized by chemical cross-linking. A much more friendly approach to deliver drugs in a controlled manner is represented by polyelectrolyte complexes (PECs) physically stabilized by spontaneous interactions between CS and natural or synthetic biocompatible polyanions. PECs with tunable structures, morphologies, and mechanical properties were fabricated in this paper by an innovative and sustainable strategy. Carboxymethyl cellulose (CMC) or poly(2-acrylamido-2-methylpropanesulfonate sodium salt) were used as aqueous solutions, while CS microparticles were evenly dispersed in the polyanion solution, at pH 6.5, where CS was not soluble. Cryostructuration of the dispersion in two steps (5 min at −196 °C, and 24 h at −18 °C), and freeze-drying at −55 °C, 48 h, conducted to pre-PEC cryogels. Next step was rearrangement of complementary polyions and the complex formation inside the pore walls of cryogels by exposure of the pre-PECs at a source of H⁺. PEC cryogels with impressive elasticity and toughness were engineered in this study by multiple-cryostructuration steps using CMC as polyanion with a molar mass of 250 kDa and an optimum concentration of polyanion and polycation. The performances of PEC cryogels in sustained delivery of anti-inflammatory drugs such as curcumin were demonstrated.

Designing of pH-Sensitive Hydrogels for Colon Targeted Drug Delivery; Characterization and In Vitro Evaluation

In the current research work, pH-sensitive hydrogels were prepared via a free radical polymerization technique for the targeted delivery of 5-aminosalicylic acid to the colon. Various proportions of chitosan, β-Cyclodextrin, and acrylic acid were cross-linked by ethylene glycol dimethacrylate. Ammonium persulfate was employed as an initiator. The development of a new polymeric network and the successful encapsulation of the drug were confirmed by Fourier transform infrared spectroscopy. Thermogravimetric analysis indicated high thermal stability of the hydrogel compared to pure chitosan and β-Cyclodextrin. A rough and hard surface was revealed by scanning electron microscopy. Similarly, the crystallinity of the chitosan, β-Cyclodextrin, and fabricated hydrogel was evaluated using powder X-ray diffraction. The swelling and drug release studies were performed in both acidic and basic medium (pH 1.2 and 7.4, respectively) at 37 °C. High swelling and drug release was observed at pH 7.4 as compared to pH 1.2. The increased incorporation of chitosan, β-Cyclodextrin, and acrylic acid led to an increase in porosity, swelling, loading, drug release, and gel fraction of the hydrogel, whereas a decrease in sol fraction was observed. Thus, we can conclude from the results that a developed pH-sensitive network of hydrogel could be employed as a promising carrier for targeted drug delivery systems.

Superamphiphilic Chitosan Cryogels for Continuous Flow Separation of Oil-In-Water Emulsions

Chitosan is a typical hydrophilic biomass building block widely used in material science and engineering. However, its intrinsic amphiphilicity has been seldom noted so far. Herein, a series of glutaraldehyde-crosslinked chitosan cryogels with superamphiphilicity are fabricated at moderately frozen conditions through a freezing-thawing process. The micron-sized porous cryogel samples display a 0° contact angle toward both water and oil, 0° water contact angle under oil, and over 120° oil contact angle underwater. By comparing the wetting behavior of the tablet compressed by pure chitosan powders, the superamphiphilicity of the chitosan sample is proven to be independent on crosslinkers. This special wettability endows the chitosan cryogels with high separation efficiency for various surfactant-stabilized oil-in-water emulsions under continuous flow mode driven by gravity as well as a peristaltic pump.

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.

Cryogels: recent applications in 3D-bioprinting, injectable cryogels, drug delivery, and wound healing

Cryogels are macroporous polymeric structures formed from the cryogelation of monomers/polymers in a solvent below freezing temperature. Due to their inherent interconnected macroporosity, ease of preparation, and biocompatibility, they are increasingly being investigated for use in biomedical applications such as 3D-bioprinting, drug delivery, wound healing, and as injectable therapeutics. This review highlights the fundamentals of macroporous cryogel preparation, cryogel properties that can be useful in the highlighted biomedical applications, followed by a comprehensive review of recent studies in these areas. Research evaluated includes the use of cryogels to combat various types of cancer, for implantation without surgical incision, and use as highly effective wound dressings. Furthermore, conclusions and outlooks are discussed for the use of these promising and durable macroporous cryogels.

β-cyclodextrin chitosan-based hydrogels with tunable pH-responsive properties for controlled release of acyclovir: design, characterization, safety, and pharmacokinetic evaluation

In this work, series of pH-responsive hydrogels (FMA1–FMA9) were synthesized, characterized, and evaluated as potential carrier for oral delivery of an antiviral drug, acyclovir (ACV). Different proportions of β-cyclodextrin (β-CD), chitosan (CS), methacrylic acid (MAA) and N′ N′-methylenebis-acrylamide (MBA) were used to fabricate hydrogels via free radical polymerization technique. Fourier transform infrared spectroscopy confirmed fabrication of new polymeric network, with successful incorporation of ACV. Scanning electron microscopy (SEM) indicated presence of slightly porous structure. Thermal analysis indicated enhanced thermal stability of polymeric network. Swelling studies were carried out at 37 °C in simulated gastric and intestinal fluids. The drug release data was found best fit to zero-order kinetics. The preliminary investigation of developed hydrogels showed a pH-dependent swelling behavior and drug release pattern. Acute oral toxicity study indicated no significant changes in behavioral, clinical, or histopathological parameters of Wistar rats. Pharmacokinetic study indicated that developed hydrogels caused a significant increase in oral bioavailability of ACV in rabbit plasma as compared to oral suspension when both were administered at a single oral dose of 20 mg kg⁻¹ bodyweight. Hence, developed hydrogel formulation could be used as potential candidate for controlled drug delivery of an antiviral drug acyclovir.

Dual pH-/thermo-responsive chitosan-based hydrogels prepared using "click" chemistry for colon-targeted drug delivery applications

A dual pH-/thermo-responsive hydrogel was designed based on a polyelectrolyte complex of polyacrylic acid (PAA) and norbornene-functionalized chitosan (CsNb), which was synergized with chemical crosslinking using bistetrazine-poly(N-isopropyl acrylamide) (bisTz-PNIPAM). The thermo-responsive polymeric crosslinker, bisTz-PNIPAM, was synthesized via reversible addition-fragmentation transfer polymerization of NIPAM. FTIR, XRD, rheological and morphological analyses demonstrated the successful formation of the polyelectrolyte network. The highly porous structure generated through the in-situ "click" reaction between Tz and Nb resulted in a higher drug loading (29.35 %). The hydrogel (COOH/NH₂ mole ratio of 3:1) exhibited limited drug release (8.5 %) of 5-ASA at a pH of 2.2, but it provided an almost complete release (92 %) at pH 7.4 and 37 °C within 48 h due to the pH responsiveness of PAA, hydrogel porosity, and shrinkage behavior of PNIPAM. The hydrogels were biodegradable and non-toxic against human fibroblast cells, suggesting their considerable potential for a colon-targeted drug delivery system.

Insight into chitosan/zeolite-A nanocomposite as an advanced carrier for levofloxacin and its anti-inflammatory properties; loading, release, and anti-inflammatory studies

Chitosan/zeolite-A nanocomposite (CH/ZA) was synthesized as a potential carrier for levofloxacin (LVOX) of enhanced technical properties. The CH/ZA composite displayed enhanced loading capacity (425 mg/g) as compared to chitosan (188.8 mg/g) and zeolite-A (234.6 mg/g). The loading behavior follows Pseudo-Second-order and Langmuir as kinetic and isotherm models. The equilibrium studies, Gaussian energy (8.15 KJ/mol), and thermodynamic parameters demonstrate homogenous and monolayer loading by complex chemical and physical reactions that are of spontaneous and exothermic nature. The CH/ZA composite is of slow and continuous release profile (200h) with 94.3% as the maximum release percentage. The release reactions are of non-Fickian behavior involving both diffusion and erosion mechanisms. The loading of LVOX into CH/ZA induced its anti-inflammatory effect against the cytokine production (IL-6 and IL-8) within the human bronchial epithelia cells (NL20). The cytotoxicity studies on the normal cells demonstrated a high safety value for the composite.

Agarose, Alginate and Chitosan Nanostructured Aerogels for Pharmaceutical Applications: A Short Review

In this short review, drug delivery systems, formed by polysaccharide-based (i.e., agarose, alginate, and chitosan) aerogels, are analyzed. In particular, the main papers, published in the period 2011-2020 in this research field, have been investigated and critically discussed, in order to highlight strengths and weaknesses of the traditional production techniques (e.g., freeze-drying and air evaporation) of bio-aerogels with respect to supercritical CO₂ assisted drying. Supercritical CO₂ assisted drying demonstrated to be a promising technique to produce nanostructured bio-aerogels that maintain the starting gel volume and shape, when the solvent removal occurs at negligible surface tension. This characteristic, coupled with the possibility of removing also cross-linking agent residues from the aerogels, makes these advanced devices safe and suitable as carriers for controlled drug delivery applications.

Construction of functional curdlan hydrogels with bio-inspired polydopamine for synergistic periodontal antibacterial therapeutics

Curdlan, a bacteria-derived polysaccharide resource, possesses substantial potential for periodontal antimicrobial delivery. Here, the facile engineering of a functionalized curdlan/polydopamine (PDA) composite hydrogels was reported. The physiochemical evaluations of composite hydrogels proved their tunable properties associated with concentration of PDA including pore size, rheological property and swelling behavior. We have systematically assessed biocompatibility in vitro and found these hydrogels toxicity-free. Moreover, photothermal performance upon near infrared light (NIR) exposure was conducted and eventually indicated the best matches for antibacterial application. The acetate chlorhexidine (CHX) was chosen as a model antimicrobial and the release profiles demonstrated the entrapped CHX could be triggered and nicely controlled by NIR. The optimized bacteriostatic rate reached 99.9 %. Overall, we aimed to provide new curdlan-based hydrogels for periodontal antibacterial treatment by combining photothermal effect and antimicrobial simultaneously.

Nanocomposite Cryogel Carriers from 2-Hydroxyethyl Cellulose Network and Cannabidiol-Loaded Polymeric Micelles for Sustained Topical Delivery

In this contribution, we report the development of original nanocomposite cryogels for sustained topical delivery of hydrophobic natural active substances such as cannabidiol (CBD). The cryogels were fabricated by a method involving cryogenic treatment and photo-crosslinking of aqueous systems containing biodegradable 2-hydroxyethyl cellulose (HEC) and CBD-loaded polymeric micelles. The preparation of the water-soluble form of CBD was a key element for the successful drug loading in the one-pot reaction. The main physical, mechanical and biological characteristics of CBD-loaded and blank cryogels such as gel fraction yield, swelling degree, morphology, storage and loss moduli, and cytotoxicity were studied in detail. The advantage of nanocomposite over pure HEC cryogel carriers in terms of achieving a sustained release profile was also demonstrated.

A review of cryogels synthesis, characterization and applications on the removal of heavy metals from aqueous solutions

The physical and chemical attributes of cryogels, such as the macroporosity, elasticity, water permeability and ease of chemical modification have attracted strong research interest in a variety of areas, such as water purification, catalysis, regenerative medicine, biotechnology, bioremediation and biosensors. Cryogels have shown high removal efficiency and selectivity for heavy metals, nutrients, and toxic dyes from aqueous solutions but there are challenges when scaling up from lab to commercial scale applications. This paper represents an overview of the most recent advances in the use of cryogels for the removal of heavy metals from water and attempts to fill the gap in the literature by deepening the understanding on the mechanisms involved, which strongly depend on the initial monomer composition and post-modification agent precursors used in synthesis. The review also describes the advantages of cryogels over other adsorbents and covers synthesis and characterization methods such as SEM/EDS, TEM, FTIR, zeta potential measurements, porosimetry, swelling and mechanical properties.

Removal of heavy metal ions from multi-component aqueous solutions by eco-friendly and low-cost composite sorbents with anisotropic pores

Copper, nickel, zinc, chromium, and iron ions are the prevailing contaminants in the aqueous effluents resulting from the photo-etching industry. In this context, we investigate here the metal ion sorption performance of an ion-imprinted cryogel (IIC), consisting of low-cost materials coming from renewable resources, towards multi-component metal ion solutions. The IIC sorbent, which is based on a chitosan matrix embedding a natural zeolite, was synthesized using a straightforward strategy by coupling copper-imprinting and unidirectional ice-templating methods. As consequence, the 1D-orientation and the interconnectivity of flow-channels sustain the fast metal ion diffusion within the IIC anisotropic structure. The removal efficiency of IIC sorbent reached 50% after 30 min, and the sorption equilibrium was attained within 150 min. For assessing the successful formation of imprinted cavities with well-defined sizes controlled by the radius of copper ions used as template, selectivity studies were performed on binary, ternary, and five-component synthetic mixtures. The efficiency of IIC as sorbent was further evaluated on real-life aqueous effluents discharged from photo-etching processes; thus, an IIC dosage of 6 g L^-1 was found to remove 98.89% of Cu²⁺, 94.56% of Fe³⁺, 91.67% of Ni²⁺, 92.24% of Zn²⁺, and 82.76% of Cr³⁺ ions from this type of industrial wastewaters.

Aldehyde-conjugated chitosan-graphene oxide glucodynamers: Ternary cooperative assembly and controlled chemical release

Simultaneous condensation of aromatic aldehydes (Ar_xCHO; x = 1-4) on chitosan biopolymer (CS) affords, after water-evaporation, structurally-conjugated aryl-functionalized CS-Ar_x-f films. Similarly, cooperative assembly of two-dimensional nanometric graphene oxide (GO), aromatic aldehyde and chitosan provides transparent, flexible and crack-free aldehyde-functionalized, ternary-reinforced CS-Ar_x-GO-f nanocomposite films. Homogenous films were obtained using ortho-hydroxybenzaldehyde Ar₁ while the para-hydroxybenzaldehyde Ar₄ was prone to packing inside. Textural and mechanical properties were investigated and expectedly, significant improvement was found for CS-Ar₁-GO-f because of the great dispersion of the aromatic and the presence of the filler. The sensitivity of unsaturated CN imine bond to hydrolysis was explored for triggering controlled release of aromatics from the as-prepared films. All of them were found to induce a time-dependent aromatic release. It has been moreover observed that the release was significantly delayed in CS-Ar_x-GO-f compared to CS-Ar_x-f, a fact attributed to the interplay of the ring with the basal and edges of graphene oxide, through π-π stacking and additional hydrogen bonding interactions. This finding shows that beyond the conventional wisdom using fillers for improving thermal and mechanical properties, the tiny carbon sheets can act as a regulator for aldehyde release, thereby providing a way for more controlled chemical delivery from confined nanocomposites.

pH-responsive chitosan based hydrogels affect the release of dapsone: Design, set-up, and physicochemical characterization

Dapsone (DAP) is a bactericidal agent used in the treatment of leprosy, caused by Mycobacterium leprae. Despite its therapeutic potential, DAP has low solubility, which results in allow therapeutic index and a high microbial resistance. Recently, new approaches were used to increase the DAP solubility. In particular, the use of interpenetrating polymer network (IPN)-hydrogels based chitosan (CS) for the controlled release of DAP provides some advantages because they can modify their swelling properties and network structures as a response to environmental stimuli. The aim of this study was to synthesize and physicochemically characterize pH-responsive chitosan/polymer hydrogels to control the release of DAP. For this reason, different combination of polymers, such as polyvinyl pyrrolidone, polyethylene glycol and hydroxypropyl methylcellulose, and concentrations of the cross-linking agents (glutaraldehyde) were used and then blended to the CS. The resulting hydrogels were evaluated in terms of physicochemical and swelling properties, rheological analysis and in vitro release of DAP at different pHs (1.2-6.8). Hydrogels were further characterized by Fourier transformed infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) analysis. pH-responsive DAP-loaded hydrogels may represent the set-up for developing potential oral formulations for the treatment of leprosy caused by Mycobacterium leprae.

Supermacroporous Composite Cryogels in Biomedical Applications

Supermacroporous gels, called cryogels, are unique scaffolds that can be prepared by polymerization of monomer solution under sub-zero temperatures. They are widely used in many applications and have significant potential biomaterials, especially for biomedical applications due to their inherent interconnected supermacroporous structures and easy formation of composite polymers in comparison to other porous polymer synthesis techniques. This review highlights the fundamentals of supermacroporous cryogels and composite cryogels, and then comprehensively summarizes recent studies in preparation, functionalization, and utilization with mechanical, biological and physicochemical features, according to the biomedical applications. Furthermore, conclusions and outlooks are discussed for the use of these promising and durable supermacroporous composite cryogels.

Could the porous chitosan-based composite materials have a chance to a "NEW LIFE" after Cu(II) ion binding?

Currently, biosorption is considered a leading-edge environmentally-friendly method for the low-cost remediation of wastewaters contaminated with metal ions. However, the safe disposal of metal-loaded biosorbents is still a challenging issue. In this context, our major objective was to explore the possibility of "waste minimization" by reusing the metal-loaded biosorbents in further environmental applications, particularly into the oxidative catalysis of dyes. Thus, the decolourisation efficiency (DE) of Methyl Orange (MO) in aqueous solutions under ambient light using copper-imprinted chitosan-based composites in comparison to non-imprinted ones was investigated in this work. The MO degradation was established first in the absence of any co-catalyst, when a DE value of 95.3% was achieved by the ion-imprinted catalysts within 360 min of reaction, compared to only 67.4% attained by the non-imprinted ones. Under Fenton-like conditions, the apparent degradation rate constant was seventy times higher, the DE increasing within 40 min to about 98.6%, and 70.5% respectively, whereas the content of co-catalyst (H₂O₂) was significantly lowered compared to other reported studies. The straightforward preparation of copper-loaded composites, along with their excellent stability and high efficiency even after four consecutive reaction runs support our ion-imprinted systems as potential catalysts for dye removal by oxidative decolourisation treatments.

The preparation and morphology control of heparin-based pH sensitive polyion complexes and their application as drug carriers

Heparin as negative polysaccharide is a universal building block to form polyion complex with different cationic counterparts. In this paper, three different cations, including chitosan, benzyldodecyldimethyl ammonium bromide and doxorubicin hydrochloride, were used to prepare heparin-based polyion complexes (HPICs). Their morphologies could be tuned by heparin content in HPIC, and they also showed pH-sensitive decomposition. Doxorubicin was further encapsulated into micelle and vesicle carrier made from heparin-benzyldodecyl dimethyl ammonium bromide PIC, whereas heparin-doxorubicin PIC could be directly used as drug carrier. In vitro drug release proved the drug carriers exhibit obvious pH sensitive release behaviour. Cytotoxicity indicated the drug carrier possessed significant cytotoxicity to tumor cells. The cell uptake observed by CLSM showed the carrier was able to deliver antitumor drug into tumor cell's nucleus. Consequently, these results showed the promising potential of HPIC in drug carrier application.