Cells capture and antimicrobial effect of hydrophobically modified chitosan coating on Escherichia coli

Progress in chitin/chitosan and their derivatives for biomedical applications: Where we stand

Chitin and its deacetylated form, chitosan, have demonstrated remarkable versatility in the realm of biomaterials. Their exceptional biocompatibility, antibacterial properties, pro- and anticoagulant characteristics, robust antioxidant capacity, and anti-inflammatory potential make them highly sought-after in various applications. This review delves into the mechanisms underlying chitin/chitosan's biological activity and provides a comprehensive overview of their derivatives in fields such as tissue engineering, hemostasis, wound healing, drug delivery, and hemoperfusion. However, despite the wealth of studies on chitin/chitosan, there exists a notable trend of homogeneity in research, which could hinder the comprehensive development of these biomaterials. This review, taking a clinician's perspective, identifies current research gaps and medical challenges yet to be addressed, aiming to pave the way for a more sustainable future in chitin/chitosan research and application.

PFAS-free superhydrophobic chitosan coating for fabrics

In view of health and environmental concerns, together with the upcoming restrictive regulations on per- and polyfluoroalkyl substances (PFAS), less impactful materials must be explored for the hydrophobization of surfaces. Polysaccharides, and especially chitosan, are being explored for their desirable properties of film formation and ease of modification. We present a PFAS-free chitosan superhydrophobic coating for textiles deposited through a solvent-free method. By contact angle analysis and drop impact, we observe that the coating imparts hydrophobicity to the fabrics, reaching superhydrophobicty (θA = 151°, θR = 136°) with increased amount of coating (from 1.6 g/cm2). This effect is obtained by the combination of chemical water repellency of the modified chitosan and the nano- and micro-roughness, assessed by SEM analysis. We perform a comprehensive study on the durability of the coatings, showing good results especially for acidic soaking where the hydrophobicity is maintained until the 8th cycle of washing. We assess the degradation of the coating by a TGA-IR investigation to define the compounds released with thermal degradation, and we confirm the coating's biodegradability by biochemical oxygen consumption. Finally, we demonstrate its biocompatibility on keratinocytes (HaCaT cell line) and fibroblasts (HFF-1 cell line), confirming that the coating is safe for human skin cells.

Advancing Photodynamic Antimicrobial Strategy: Sustainable Fabrication of Novel Lauryl Gallate-Chitosan Hydrophobic Films with Rapid Bacterial Capture and Biofilms Elimination Capabilities for Promoting Wound Healing

Bioinspired photoactive composites, in terms of photodynamic inactivation, cost-effectiveness, and biosafety, are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the weak bacterial membrane affinity of the photoactive substrate and the lack of synergistic antibacterial effect remain crucial shortcomings for their antibacterial applications. Herein, we developed a hydrophobic film from food antioxidant lauryl gallate covalently functionalized chitosan (LG-g-CS conjugates) through a green radical-induced grafting reaction that utilizes synergistic bacteria capture, contact-killing, and photodynamic inactivation activities to achieve enhanced bactericidal and biofilm elimination capabilities. Besides, the grafting reaction mechanism between LG and CS in the ascorbic acid (AA)/H2O2 redox system was further proposed. The LG-g-CS films feature hydrophobic side chains and photoactive phenolic hydroxyl groups, facilitating dual bactericidal activities through bacteria capture and contact-killing via strong hydrophobic and electrostatic interactions with bacterial membranes as well as blue light (BL)-driven photodynamic bacterial eradication through the enhanced generation of reactive oxygen species. As a result, the LG-g-CS films efficiently capture and immobilize bacteria and exhibit excellent photodynamic antibacterial activity against model bacteria (Escherichia coli and Staphylococcus aureus) and their biofilms under BL irradiation. Moreover, LG-g-CS films could significantly promote the healing process of S. aureus-infected wounds. This research demonstrates a new strategy for designing and fabricating sustainable bactericidal and biofilm-removing materials with a high bacterial membrane affinity and photodynamic activity.

Progress in injectable hydrogels for the treatment of incompressible bleeding: an update

Uncontrollable haemorrhage from deep, noncompressible wounds remains a persistent and intractable challenge, accounting for a very high proportion of deaths in both war and disaster situations. Recently, injectable hydrogels have been increasingly studied as potential haemostatic materials, highlighting their enormous potential for the management of noncompressible haemorrhages. In this review, we summarize haemostatic mechanisms, commonly used clinical haemostatic methods, and the research progress on injectable haemostatic hydrogels. We emphasize the current status of injectable hydrogels as haemostatic materials, including their physical and chemical properties, design strategy, haemostatic mechanisms, and application in various types of wounds. We discuss the advantages and disadvantages of injectable hydrogels as haemostatic materials, as well as the opportunities and challenges involved. Finally, we propose cutting-edge research avenues to address these challenges and opportunities, including the combination of injectable hydrogels with advanced materials and innovative strategies to increase their biocompatibility and tune their degradation profile. Surface modifications for promoting cell adhesion and proliferation, as well as the delivery of growth factors or other biologics for optimal wound healing, are also suggested. We believe that this paper will inform researchers about the current status of the use of injectable haemostatic hydrogels for noncompressible haemorrhage and spark new ideas for those striving to propel this field forward.

Hydrophobically modified hydrogel with enhanced tissue adhesion and antibacterial capacity for wound healing

The increasing emergence of drug-resistant bacteria and bacteria-infected wounds highlights the urgent need for new kinds of antibacterial wound dressing. Herein, we reported a novel bio-adhesive and antibacterial hydrogel consisting of hydrophobically modified gelatin, oxidized konjac glucomannan, and dopamine. This kind of functional hydrogel was endowed with developed stability in a liquid environment and strong tissue adhesion, even much higher than the commercial fibrin glue to wounds. The excellent bacteria-killing efficiency of hydrophobically modified hydrogel against S. aureus and E. coli was verified, as well as the low hemolysis ratio against erythrocytes in vitro. The hydrogel also exhibited good cytocompatibility in terms of supporting cell proliferation. Most importantly, these abovementioned properties could be customized by altering the substitution degree of hydrophobic groups during manufacturing, demonstrating its great potential in biomedical fields such as tissue adhesive and wound dressing.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Surface Functionalization of Ureteral Stents-Based Polyurethane: Engineering Antibacterial Coatings

Bacterial colonization of polyurethane (PU) ureteral stents usually leads to severe and challenging clinical complications. As such, there is an increasing demand for an effective response to this unmet medical challenge. In this study, we offer a strategy based on the functionalization of PU stents with chitosan-fatty acid (CS-FA) derivatives to prevent bacterial colonization. Three different fatty acids (FAs), namely stearic acid (SA), oleic acid (OA), and linoleic acid (LinA), were successfully grafted onto chitosan (CS) polymeric chains. Afterwards, CS-FA derivatives-based solutions were coated on the surface of PU stents. The biological performance of the modified PU stents was evaluated against the L929 cell line, confirming negligible cytotoxicity of the developed coating formulations. The antibacterial potential of coated PU stents was also evaluated against several microorganisms. The obtained data indicate that the base material already presents an adequate performance against Staphylococcus aureus, which slightly improved with the coating. However, the performance of the PU stents against Gram-negative bacteria was markedly increased with the surface functionalization approach herein used. As a result, this study reveals the potential use of CS-FA derivatives for surface functionalization of ureteral PU stents and allows for conjecture on its successful application in other biomedical devices.

Chitosan Nanocomposite Coatings Containing Chemically Resistant ZnO-SnOx Core-shell Nanoparticles for Photocatalytic Antifouling

Functional nanocomposites with biopolymers and zinc oxide (ZnO) nanoparticles is an emerging application of photocatalysis in antifouling coatings. The reduced chemical stability of ZnO in the acidic media in which chitosan is soluble affects the performance of chitosan nanocomposites in antifouling applications. In this study, a thin shell of amorphous tin dioxide (SnO_x) was grown on the surface of ZnO to form ZnO–SnO_x core–shell nanoparticles that improved the chemical stability of the photocatalyst nanoparticles, as examined at pH 3 and 6. The photocatalytic activity of ZnO–SnO_x in the degradation of methylene blue (MB) dye under visible light showed a higher efficiency than that of ZnO nanoparticles due to the passivation of electronic defects. Chitosan-based antifouling coatings with varying percentages of ZnO or ZnO–SnO_x nanoparticles, with or without the glutaraldehyde (GA) crosslinking of chitosan, were developed and studied. The incorporation of photocatalysts into the chitosan matrix enhanced the thermal stability of the coatings. Through a mesocosm study using running natural seawater, it was found that chitosan/ZnO–SnO_x/GA coatings enabled better inhibition of bacterial growth compared to chitosan coatings alone. This study demonstrates the antifouling potential of chitosan nanocomposite coatings containing core–shell nanoparticles as an effective solution for the prevention of biofouling.

Preparation, characterization and antibacterial mechanism of the chitosan coatings modified by Ag/ZnO microspheres

BACKGROUND

To improve the physicochemical and antibacterial properties of coatings, the chitosan (CS) coatings were respectively prepared by a casting method with zinc oxide (ZnO) and silver (Ag)/ZnO microspheres as modifiers. The chemical structures and micromorphology of ZnO, Ag/ZnO microspheres and CS coatings were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. Furthermore, using the dominant spoilage bacteria of aquatic products, Shewanella putrefaciens and Pseudomonas aeruginosa, as objects, the antibacterial activities and mechanism of the CS coatings were investigated.

RESULTS

The results show that ZnO and Ag/ZnO microspheres are dispersed homogeneously in the CS coatings. After modified by ZnO and Ag/ZnO microspheres, the mechanical properties and antibacterial abilities of the CS coatings are improved, and that of 0.5% Ag/ZnO-CS coating is the optimal. For pure CS coating, the bacterial cell membrane is damaged slightly because of the electrostatic interaction between NH³⁺ of CS and the negative charge on bacterial surface. After treated by ZnO-CS composite coating, the bacterial cell membrane is destroyed badly on account of the earlier-mentioned ion interaction and disturbing the synthesis of high molecular weight total protein.

CONCLUSION

With regard to Ag/ZnO-CS composite coating, the bacterial cell membrane is damaged seriously and cell contents are completely released due to ion interaction, disturbing the synthesis of high molecular weight total protein and low molecular weight membrane protein. Hence, Ag/ZnO-CS composite coatings are antimicrobial materials and food preservative materials with great potential application. © 2020 Society of Chemical Industry.

Polymeric Hydrogel Systems as Emerging Biomaterial Platforms to Enable Hemostasis and Wound Healing

Broad interest in developing new hemostatic technologies arises from unmet needs in mitigating uncontrolled hemorrhage in emergency, surgical, and battlefield settings. Although a variety of hemostats, sealants, and adhesives are available, development of ideal hemostatic compositions that offer a range of remarkable properties including capability to effectively and immediately manage bleeding, excellent mechanical properties, biocompatibility, biodegradability, antibacterial effect, and strong tissue adhesion properties, under wet and dynamic conditions, still remains a challenge. Benefiting from tunable mechanical properties, high porosity, biocompatibility, injectability and ease of handling, polymeric hydrogels with outstanding hemostatic properties have been receiving increasing attention over the past several years. In this review, after shedding light on hemostasis and wound healing processes, the most recent progresses in hydrogel systems engineered from natural and synthetic polymers for hemostatic applications are discussed based on a comprehensive literature review. Most studies described used in vivo models with accessible and compressible wounds to assess the hemostatic performance of hydrogels. The challenges that need to be tackled to accelerate the translation of these novel hemostatic hydrogel systems to clinical practice are emphasized and future directions for research in the field are presented.

How Do Amphiphilic Biopolymers Gel Blood? An Investigation Using Optical Microscopy

Amphiphilic biopolymers such as hydrophobically modified chitosan (hmC) have been shown to convert liquid blood into elastic gels. This interesting property could make hmC useful as a hemostatic agent in treating severe bleeding. The mechanism for blood gelling by hmC is believed to involve polymer-cell self-assembly, i.e., insertion of hydrophobic side chains from the polymer into the lipid bilayers of blood cells, thereby creating a network of cells bridged by hmC. Here, we probe the above mechanism by studying dilute mixtures of blood cells and hmC in situ using optical microscopy. Our results show that the presence of hydrophobic side chains on hmC induces significant clustering of blood cells. The extent of clustering is quantified from the images in terms of the area occupied by the 10 largest clusters. Clustering increases as the fraction of hydrophobic side chains increases; conversely, clustering is negligible in the case of the parent chitosan that lacks hydrophobes. Moreover, the longer the hydrophobic side chains, the greater the clustering (i.e., C₁₂ > C₁₀ > C₈ > C₆). Clustering is negligible at low hmC concentrations but becomes substantial above a certain threshold. Finally, clustering due to hmC can be reversed by adding the supramolecule α-cyclodextrin, which is known to capture hydrophobes in its binding pocket. Overall, the results from this work are broadly consistent with the earlier mechanism, albeit with a few modifications.

Anti-Infective and Pro-Coagulant Chitosan-Based Hydrogel Tissue Adhesive for Sutureless Wound Closure

Multifunctional tissue adhesives with excellent adhesion, antibleeding, anti-infection, and wound healing properties are desperately needed in clinical surgery. However, the successful development of multifunctional tissue adhesives that simultaneously possess all these properties remains a challenge. We have prepared a novel chitosan-based hydrogel adhesive by integration of hydrocaffeic acid-modified chitosan (CS-HA) with hydrophobically modified chitosan lactate (hmCS lactate) and characterized its gelation time, mechanical properties, and microstructure. Tissue adhesion properties were evaluated using both pigskin and intestine models. In situ antibleeding efficacy was demonstrated via the rat hemorrhaging liver and full-thickness wound closure models. Good antibacterial activity and anti-infection capability toward S. aureus and P. aeruginosa were confirmed using in vitro contact-killing assays and an infected pigskin model. The result of coculturing with 3T3 fibroblast cells indicated that the hydrogels have no significant cytotoxicity. Most importantly, the biocompatible and biodegradable CS-HA/hmCS lactate hydrogel was able to close the wound in a sutureless way and promote wound healing. Our results demonstrate that this hydrogel has great promise for sutureless closure of surgical incisions.

Interpenetrating polymer network-based nanocomposites reinforced with octadecylamine capped Cu/reduced graphene oxide nanohybrid with hydrophobic, antimicrobial and antistatic attributes

Designing of mechanically tough elastomeric materials encompassed with intrinsic surface hydrophobicity, antistatic and antimicrobial attributes is in skyrocketing demands, especially to protect the instruments which are submerged in water. Herein, the authors depicted the fabrication of interpenetrating polymer network-based nanocomposites containing different doses of octadecylamine capped Cu/RGO nanohybrid. The structures and morphologies of the synthesized nanohybrid and the fabricated nanocomposites were characterized by using FTIR, XRD, XPS, TGA, FESEM and TEM analyses. Most interestingly the nanocomposites showed good hydrophobicity (static contact angle: 119.2°-129.3°), low surface resistivity (~10⁷ Ω m) and strong antimicrobial activity towards Gram negative (Pseudomonas aeruginosa and Yersinia pestis) and Gram positive (Bacillus cereus) bacterial strains. The fabricated nanocomposites also exhibited antifungal (Candida albicans) activity. In addition, the fabricated nanocomposites showed excellent mechanical properties including high tensile strength (14.03-20.9 MPa), outstanding flexibility (1887-2470%), excellent toughness (249.89-510.1 MJ.m^-3), high scratch resistance (>10 kg) and high thermostability (281-288 °C). Therefore, the fabricated nanocomposites can be used as an effective thin film for many advanced applications.

Antimicrobial sponge prepared by hydrophobically modified chitosan for bacteria removal

Hydrophobically modified chitosan (HMCS) prepared by reacting chitosan with dodecyl aldehyde can generate very stable foam when dissolved in mild acidic condition under vigorous mechanical stirring. A durable and lightweight (density of 32 mg/ml) sponge was obtained by freeze-drying the stably formed HMCS foam. In addition to the cationic nature of chitosan, the grafted C₁₂ alkyl chains were also able to help HMCS sponge for capturing E. coli cells (∼4.0 × 10⁸ cells/mg sponge) by intercalating into the outer membrane of E. coli cells. E. coli cells captured on HMCS sponge were found to be mostly dead and easily released into the bulk solution so that the active surface could be continuously regenerated for capturing and killing the rest of alive cells. In comparison with its counterpart (chitosan sponge), HMCS sponge maintained a higher operational stability for the removal of E. coli cells. After 5 repeated cells removal operation, the removal capacity of HMCS sponge could be regenerated back to >90% by thorough washing with ethanol.

Photodynamic antimicrobial chemotherapy with cationic phthalocyanines against Escherichia coli planktonic and biofilm cultures

Cationic phthalocyanines (Pcs) combine with photodynamic antimicrobial chemotherapy (PACT) presents excellent antibacterial activity to Gram-negative bacteriaE. coli.