Preparation and in vitro evaluation of FGF-2 incorporated carboxymethyl chitosan nanoparticles

Assessment of the cytotoxic effect of carboxymethyl chitosan-loaded amygdalin nanoparticles against human normal and cancer cell lines

In recent years, the development of antitumor drugs has been dedicated to natural products. Amygdalin is a natural herbal cyanoglycoside that has anticarcinogenic effect on many types of cancers once hydrogen cyanide (HCN) is released. The main objective of the present study is to synthesize and investigate the potential of carboxymethyl chitosan nanoparticles (CMC NPs) as drug delivery agents for amygdalin encapsulation and its delivery to cancer and normal cell lines. In this study, carboxymethyl chitosan nanoparticles encapsulated with amygdalin (CMC-Am NPs) were prepared and characterized through their particle size, surface charge, chemical structure and dielectric properties. Also, the invitro drug release of amygdalin from CMC NPs was studied. Additionally, the cytotoxcity of the amygdalin and CMC-loaded amygdalin NPs were evaluated through MTT assay. The results showed that the prepared CMC-loaded amygdalin NPs exhibited a small particle size of 129 nm, high zeta potential value of - 43 mV and confirmed the amygdalin stability and compatibility with CMC NPs. Furthermore, the CMC NPs demonstrated sustained release of amygdalin during 24 h. Moreover, compared to free amygdalin, amygdalin-loaded CMC NPs have significant anti-cancerous effect on human colon HCT-116 and breast MCF-7 cancer cell lines while being safe on normal cells BJ1. In conclusion, CMC NPs can be employed as an efficient drug delivery vehicle for controlled and sustained amygdalin release with enhanced cytotoxicity on malignant cells without harming normal cells.

pH-responsive nanogels with enhanced antioxidant and antitumor activities on drug delivery and smart drug release

pH-responsive nanogels have played an increasingly momentous role in tumor treatment. The focus of this study is to design and develop pH-responsive benzimidazole-chitosan quaternary ammonium salt (BIMIXHAC) nanogels for the controlled release of doxorubicin hydrochloride (DOX) while enhancing its hydrophilicity. BIMIXHAC is crosslinked with carboxymethyl chitosan (CMC), hyaluronic acid sodium salt (HA), and sodium alginates (SA) using an ion crosslinking method. The chemical structure of chitosan derivatives was verified by 1H NMR and FT-IR techniques. Compared to hydroxypropyl trimethyl ammonium chloride chitosan (HACC)-based nanogels, BIMIXHAC-based nanogels exhibit better drug encapsulation efficiency and loading capacity (BIMIXHAC-D-HA 91.76 %, and 32.23 %), with pH-responsive release profiles and accelerated release in vitro. The series of nanogels formed by crosslinking with three different polyanionic crosslinkers have different particle size potentials and antioxidant properties. BIMIXHAC-HA, BIMIXHAC-SA and BIMIXHAC-CMC demonstrate favorable antioxidant capability. In addition, cytotoxicity tests showed that BIMIXHAC-based nanogels have high biocompatibility. BIMIXHAC-based nanogels exhibit preferable anticancer effects on MCF-7 and A549 cells. Furthermore, the BIMIXHAC-D-HA nanogel was 2.62 times less toxic than DOX to L929 cells. These results suggest that BIMIXHAC-based nanogels can serve as pH-responsive nanoplatforms for the delivery of anticancer drugs.

Protein-modified nanomaterials: emerging trends in skin wound healing

Prolonged inflammation can impede wound healing, which is regulated by several proteins and cytokines, including IL-4, IL-10, IL-13, and TGF-β. Concentration-dependent effects of these molecules at the target site have been investigated by researchers to develop them as wound-healing agents by regulating signaling strength. Nanotechnology has provided a promising approach to achieve tissue-targeted delivery and increased effective concentration by developing protein-functionalized nanoparticles with growth factors (EGF, IGF, FGF, PDGF, TGF-β, TNF-α, and VEGF), antidiabetic wound-healing agents (insulin), and extracellular proteins (keratin, heparin, and silk fibroin). These molecules play critical roles in promoting cell proliferation, migration, ECM production, angiogenesis, and inflammation regulation. Therefore, protein-functionalized nanoparticles have emerged as a potential strategy for improving wound healing in delayed or impaired healing cases. This review summarizes the preparation and applications of these nanoparticles for normal or diabetic wound healing and highlights their potential to enhance wound healing.

Arginase from Priestia megaterium and the Effects of CMCS Conjugation on Its Enzymological Properties

Arginase has shown promising potential in treating cancers by arginine deprivation therapy; however, low enzymatic activity and stability of arginase are impeding its development. This study was aimed to improve the enzymological properties of a marine bacterial arginase by carboxymethyl chitosan (CMCS) conjugation. An arginase producing marine bacterium Priestia megaterium strain P6 was isolated and identified. The novel arginase PMA from the strain was heterologously expressed, purified, and then conjugated to CMCS by ionic gelation with calcium chloride as the crosslinking agent. Enzymological properties of both PMA and CMCS-PMA conjugate were determined. The optimum temperature for PMA and CMCS-PMA at pH 7 were 60 °C and 55 °C, respectively. The optimum pH for PMA and CMCS-PMA at 37 °C were pH 10 and 9, respectively. CMCS-PMA showed higher thermostability than PMA over 55-70 °C and higher pH stability over pH 4-11 with the highest pH stability at pH 7. At 37 °C and pH of 7, i.e., around the human blood temperature and pH, CMCS-PMA was higher than the free PMA in enzymatic activity and stability by 24% and 21%, respectively. CMCS conjugation not only changed the optimum temperature, optimum pH, and enzymatic activity of PMA, but also improved its pH stability and temperature stability, and thus made it more favorable for medical application.

Clindamycin phosphate and bone morphogenetic protein-7 loaded combined nanoparticle-graft and nanoparticle-film formulations for alveolar bone regeneration - An in vitro and in vivo evaluation

Commonly utilized techniques for healing alveolar bone destruction such as the use of growth factors, suffering from short half-life, application difficulties, and the ability to achieve bioactivity only in the presence of high doses of growth factor. The sustained release of growth factors through a scaffold-based delivery system offers a promising and innovative tool in dentistry. Furthermore, it is suggested to guide the host response by using antimicrobials together with growth factors to prevent recovery and achieve ideal regeneration. Herein, the aim was to prepare and an in vitro - in vivo evaluation of bone morphogenetic protein 7 (BMP-7) and clindamycin phosphate (CDP) loaded polymeric nanoparticles, and their loading into the alginate-chitosan polyelectrolyte complex film or alloplastic graft to accelerate hard tissue regeneration. PLGA nanoparticles containing CDP and BMP-7, separately or together, were prepared using the double emulsion solvent evaporation technique. Through in vitro assays, it was revealed that spherical particles were homogeneously distributed in the combination formulations, and sustained release could be achieved for >12 weeks with all formulations. Also, results from the micro-CT and histopathological analyses indicated that CDP and BMP-7 loaded nanoparticle-film formulations were more effective in treatment than the nanoparticle loaded grafts.

Recent advances in carboxymethyl chitosan-based materials for biomedical applications

Chitosan (CS) and its derivatives have been applied extensively in the biomedical field owing to advantageous characteristics including biodegradability, biocompatibility, antibacterial activity and adhesive properties. The low solubility of CS at physiological pH limits its use in systems requiring higher dissolving ability and a suitable drug release rate. Besides, CS can result in fast drug release because of its high swelling degree and rapid water absorption in aqueous media. As a water-soluble derivative of CS, carboxymethyl chitosan (CMC) has certain improved properties, rendering it a more suitable candidate for wound healing, drug delivery and tissue engineering applications. This review will focus on the antibacterial, anticancer and antitumor, antioxidant and antifungal bioactivities of CMC and the most recently described applications of CMC in wound healing, drug delivery, tissue engineering, bioimaging and cosmetics.

Characterization of a novel marine microbial uricase from Priestia flexa and evaluation of the effects of CMCS conjugation on its enzymatic properties

A novel uricase producing marine bacterium Priestia flexa alkaAU was isolated and identified. The 16S rDNA and the uricase coding gene were sequenced, analyzed and submitted to GenBank. The uricase from Priestia flexa alkaAU (PFU) was purified, determined to be 58.87 kDa, and conjugated with carboxymethyl chitosan (CMCS) by ionic gelation. CMCS conjugation had no effect on the optimum pH of PFU but decreased the optimum temperature by 10 °C. CMCS conjugation increased the specific activity of PFU by 53% at the human body temperature (37 °C) and small intestine's pH (pH 6.8). Uricase thermostabilizing ability of CMCS was significant in the range of 37-80 °C but not at lower temperatures. For improvement of the pH stability of PFU, CMCS was more effective at pHs 3-5 than pHs 6-11. CMCS increased the half-life of PFU against artificial intestinal fluid by 1.5 folds, which demonstrated the potential capability of CMCS-PFU for oral administration.

Preparation and characterisation of gallic acid loaded carboxymethyl chitosan nanoparticles as drug delivery system for cancer treatment

Gallic acid (GA) is a natural phenolic compound with antioxidant, anti-proliferative, and anticancer effects. However, the potential of GA as an anticancer agent is restricted by its poor absorption, rapid elimination, and low bioavailability. Nanostructure-drug carriers have opened up a new field in cancer therapy by improving the efficacy of drugs. In this work, we developed a nanoformulation of GA in carboxymethyl chitosan (CMC). The particle size, surface charge and molecular structure of the CMC NPs loaded and unloaded with GA were measured using TEM, DLS and FTIR spectroscopy, respectively. The dielectric parameters (permittivity ε′ and dielectric loss ε″) were measured in the frequency range (0.1 Hz–5 MHz) at room temperature. Additionally, the in-vitro anti-cancer effects of the GA, CMC NPs, and GA-CMC NPs were tested against human colon carcinoma (HCT-116), human breast carcinoma (MCF-7), and normal skin fibroblast cells (BJ1) using MTT assay. TEM confirmed that the NPs have a spherical morphology within the size range of 15 nm. DLS studies revealed NPs with a mean diameter of 31.06 nm. The zeta potential results indicated the high suspension stability of the prepared nanoformulation. The FTIR results indicated the interaction between GA and CMC NPs. The dielectric study showed a decrease within the ε″ and conductivity values of GA-CMC NPs which confirmed the successful encapsulation of GA within the CMC NPs. Cytotoxicity studies indicated that the GA-CMC NPs showed specific toxicity towards cancer cells and non-toxicity to normal cells. Overall, these results indicate that the GA-CMC NPs will be an efficient nanocarrier for delivering gallic acid to cancer cells.

Oral Administration of Nanopeptide CMCS-20H Conspicuously Boosts Immunity and Precautionary Effect Against Bacterial Infection in Fish

Massive mortalities caused by bacterial infections in intensive aquaculture result in serious economic losses. In this study, a novel antimicrobial peptide gcIFN-20H was efficiently expressed in Pichia pastoris (GS115) and loaded on carboxylmethyl chitosan (CMCS) to prepare CMCS-20H nanoparticles. Through physical characterization assays (TEM, DLS, BCA, and Raman) and biological activity tests (antimicrobial activity and cytotoxicity), CMCS-20H nanopeptide was verified to be spherical nanoparticles with sustained release, antimicrobial activity, and negligible toxicity. CMCS-20H nanoparticles are more resistant to intestinal degradation than unloaded gcIFN-20H by indirect immunofluorescence assay. Oral administration was then carried out for 42 days. Complement C3 content, lysozyme, and total superoxide dismutase activities are highest in CMCS-20H group by serum biochemistry index assays. After challenge with Aeromonas hydrophila, the survival rate in CMCS-20H group is highest (46%), which is 64% higher than the control group (28%). Meanwhile, the tissue bacterial loads (intestine, spleen, head kidney, trunk kidney, hepatopancreas, muscle, and blood) in the CMCS-20H group are significantly lower than other groups. By PAS staining analysis, the number of intestinal villi goblet cells and the thickness of mucin in the CMCS-20H group obviously increased. CMCS-20H effectively enhances mRNA expressions of some important immune genes (IL-1β, IL-6, TNF-α, IL-2, IFN-γ2, and IgM). The minimal tissue lesions (Intestine, spleen, and trunk kidney) were seen in the CMCS-20H group by histopathological examination. 16S rRNA sequencing showed that oral CMCS-20H maintains the intestinal microbiome homeostasis in bacterial infection. The results indicate that the novel nanopeptide CMCS-20H as the immunopotentiator can remarkably boost fish immunity and precautionary effect by oral administration and address the theoretical mechanisms and insights into the promising application prospect in aquaculture.

Polysaccharide-Based Materials Created by Physical Processes: From Preparation to Biomedical Applications

Polysaccharide-based materials created by physical processes have received considerable attention for biomedical applications. These structures are often made by associating charged polyelectrolytes in aqueous solutions, avoiding toxic chemistries (crosslinking agents). We review the principal polysaccharides (glycosaminoglycans, marine polysaccharides, and derivatives) containing ionizable groups in their structures and cellulose (neutral polysaccharide). Physical materials with high stability in aqueous media can be developed depending on the selected strategy. We review strategies, including coacervation, ionotropic gelation, electrospinning, layer-by-layer coating, gelation of polymer blends, solvent evaporation, and freezing-thawing methods, that create polysaccharide-based assemblies via in situ (one-step) methods for biomedical applications. We focus on materials used for growth factor (GFs) delivery, scaffolds, antimicrobial coatings, and wound dressings.

An asymmetric electrospun membrane for the controlled release of ciprofloxacin and FGF-2: Evaluation of antimicrobial and chemoattractant properties

Here, an asymmetric double-layer membrane has been designed and fabricated by electrospinning as a tool for a potential wound healing application. A hydrophobic layer has been produced by using a polyurethane-polycaprolactone (PU-PCL) copolymer and loaded with the antibacterial ciprofloxacin whereas an ion responsive hydrophilic layer has been produced by using an octyl derivative of gellan gum (GG-C₈) and polyvinyl alcohol (PVA) and loaded with the growth factor FGF-2. This study investigated how the properties of this asymmetric membrane loaded with actives, were influenced by the ionotropic crosslinking of the hydrophilic layer. In particular, the treatment in DPBS and the crosslinking in CaCl₂ 0.1 or 1 M of the hydrophilic layer affected the release profile of the bioactive molecules allowing to modulate both the antimicrobial effect, as assayed by logarithmic reduction of the Staphylococcus aureus viable count, and the chemoattractant properties on NIH 3 T3 cell line, as assayed by scratch test and cell chemoattraction assay.

Third-degree burn mouse treatment using recombinant human fibroblast growth factor 2

Fibroblast growth factor 2 (FGF-2) is a multifunctional protein that has major roles in wound healing, tissue repair, and regeneration. This therapeutic protein is widely used for burn treatment because it can stimulate cell proliferation and differentiation, angiogenesis, and extracellular matrix remodeling. In this study, we developed a simple method using a controlled heated brass rod to create a homogenous third-degree burn murine model and evaluated the treatment using recombinant human FGF-2 (rhFGF-2). The results indicated that the wound area was 0.83 ± 0.05 cm² and wound depth was 573.42 ± 147.82 μm. Mice treated with rhFGF-2 showed higher rates of wound closure, granulation tissue formation, angiogenesis, and re-epithelialization than that of phosphate-buffered saline (PBS)-treated group. In conclusion, our lab-made rhFGF-2 could be a potentially therapeutic protein for burn treatment as well as a bioequivalent drug for other commercial applications using FGF-2.

Development of FGF-2-loaded electrospun waterborne polyurethane fibrous membranes for bone regeneration

Guided bone regeneration (GBR) membrane has been used to improve functional outcomes for periodontal regeneration. However, few studies have focused on the biomimetic membrane mimicking the vascularization of the periodontal membrane. This study aimed to fabricate waterborne polyurethane (WPU) fibrous membranes loaded fibroblast growth factor-2 (FGF-2) via emulsion electrospinning, which can promote regeneration of periodontal tissue via the vascularization of the biomimetic GBR membrane. A biodegradable WPU was synthesized by using lysine and dimethylpropionic acid as chain extenders according to the rule of green chemical synthesis technology. The WPU fibers with FGF-2 was fabricated via emulsion electrospinning. The results confirmed that controlled properties of the fibrous membrane had been achieved with controlled degradation, suitable mechanical properties and sustained release of the factor. The immunohistochemical expression of angiogenic-related factors was positive, meaning that FGF-2 loaded in fibers can significantly promote cell vascularization. The fiber scaffold loaded FGF-2 has the potential to be used as a functional GBR membrane to promote the formation of extraosseous blood vessels during periodontal repairing.

Topical delivery of growth factors and metal/metal oxide nanoparticles to infected wounds by polymeric nanoparticles: an overview

INTRODUCTION

Infected chronic wounds particularly diabetic foot ulcers (DFUs) can result from stable colonization of antibiotic-resistant bacteria and fungi at the wound sites. In this context, the rapid healing of infected wounds has been the main goal in recent investigations. This issue can be solved by improving wound-healing phases including hemostasis, inflammatory, proliferative, and remodeling/maturation, and removal of bacteria and fungi. The applications of growth factors (GFs) and metal/metal oxide nanoparticles (MNPs/MONPs) are two choices for these targets. However, the lack of sustainable release of these agents is an important problem for appropriate wound healing.

AREA COVERED

The present review is focused on recent advances in delivery systems composed of growth factor and MNPs/MONPs for rapid wound healing.

EXPERT OPINION

Synthetic and natural polymeric micro- and nanocarriers including polyvinylpyrrolidone (PVP) and chitosan play a vital role in the healing of infected chronic wounds. Using various derivatives of chitosan as pH-responsive polymer with basic and acidic groups can be the best option to prepare controllable and sequential GF release. However, it warrants further extensive research to solve wound-healing problems.

Novel Carboxylated Chitosan-Based Triptolide Conjugate for the Treatment of Rheumatoid Arthritis

A new platform for triptolide (TP) delivery was prepared by conjugating TP to a carboxylmethyl chitosan (CMCS). Compared with the natural TP, the TP-conjugate (TP-CMCS) containing TP of ~5 wt% exhibited excellent aqueous solubility (>5 mg/mL). Results of in vitro experiments showed that TP-CMCS could relieve TP-induced inhibition on RAW264.7 cells and apoptosis, respectively. Compared with the TP group, TP-CMCS could effectively alleviate the toxicity injury of TP and decreased the mortality rate of the mice (p < 0.05). TP-CMCS did not cause much damage to the liver (AST and ALT) and kidney (BUN and CRE) (p < 0.05). After administration, the levels of IL-6, IL-1β, and TNF-α decreased, and the arthritis detumescence percentages increased significantly, and the bony erosion degree was distinctly decreased in the TP-CMCS groups and TP group. Our results suggested that TP-CMCS was a useful carrier for the treatment of RA, which enhanced aqueous solubility of free TP and reduced drug toxicity in vitro and in vivo.

New Nanotechnologies for the Treatment and Repair of Skin Burns Infections

Burn wounds are highly debilitating injuries, with significant morbidity and mortality rates worldwide. In association with the damage of the skin integrity, the risk of infection is increased, posing an obstacle to healing and potentially leading to sepsis. Another limitation against healing is associated with antibiotic resistance mainly due to the use of systemic antibiotics for the treatment of localized infections. Nanotechnology has been successful in finding strategies to incorporate antibiotics in nanoparticles for the treatment of local wounds, thereby avoiding the systemic exposure to the drug. This review focuses on the most recent advances on the use of nanoparticles in wound dressing formulations and in tissue engineering for the treatment of burn wound infections.

Hyaluronic acid and chitosan-based nanosystems: a new dressing generation for wound care

INTRODUCTION

The main goal in the management of chronic wounds is the development of multifunctional dressings able to promote a rapid recovery of skin structure and function, improving patient compliance.

AREAS COVERED

This review discusses the use of nanosystems, based on hyaluronic acid and chitosan or their derivatives for the local treatment of chronic wounds. The bioactive properties of both polysaccharides will be described, as well as the results obtained in the last decade by the in vitro and in vivo evaluation of the wound healing properties of nanosystems based on such polymers.

EXPERT OPINION

In the last decades, there has been a progressive change in the local treatments of chronic wounds: traditional inert dressings have been replaced by more effective bioactive ones, based on biopolymers taking part in wound healing and able to release the loaded active agents in a controlled way. With the advance of nanotechnologies, the scenario has further changed: nanosystems, characterized by a large area-to-volume ratio, show an improved interaction with the biological substrates, amplifying the activity of the constituent biopolymers. In the coming years, a deeper insight into wound healing mechanisms and the development of new techniques for nanosystem manufacturing will results in the design of new scaffolds with improved performance.