Confirmation and measurement of hydrophobic interaction in sol-gel system of konjac glucomannan with different degree of deacetylation

Deacetylation enhances the structure and gelation properties of konjac glucomannan/soy protein isolate cold-set gels

This study aimed to investigate the effect of the deacetylated konjac glucomannan (DKGM), with varying degree of deacetylation (DD), on the physicochemical and structural properties of transglutaminase-induced soy protein isolate (SPI) cold-set gels. Compared with native konjac glucomannan (KGM), DKGM significantly enhanced the gel strength, water-holding capacity, and thermal stability of the composite gels, with DK3 (DKGM with 65.85 % deacetylation) showing the most significant improvement. The secondary and tertiary structures of SPI in the DK3 group were the most stable. Compared with the KGM group, the DK3 group showed a 58.32 % increase in hydrophobic interaction and a 37.98 % decrease in free sulfhydryl content. The microstructure results demonstrated that DK3 was uniformly dispersed within the SPI network, promoting the formation of a continuous and dense network structure. This was mainly due to DK3 having a moderate particle size and low viscosity. Therefore, DKGM with a moderate DD is conducive to forming a more ordered and dense gel network structure, imparting optimal gel performance to the SPI cold-set gel.

Regulation of glycose and lipid metabolism and application based on the colloidal nutrition science properties of konjac glucomannan: A comprehensive review

The physicochemical properties of dietary fiber in the gastrointestinal tract, such as hydration properties, adsorption properties, rheological properties, have an important influence on the physiological process of host digestion and absorption, leading to the differences in satiety and glucose and lipid metabolisms. Based on the diversified physicochemical properties of konjac glucomannan (KGM), it is meaningful to review the relationship of structural characteristics, physicochemical properties and glycose and lipid metabolism. Firstly, this paper bypassed the category of intestinal microbes, and explained the potential of dietary fiber in regulating glucose and lipid metabolism during nutrient digestion and absorption from the perspective of colloidal nutrition. Secondly, the modification methods of KGM to regulate its physicochemical properties were discussed and the relationship between KGM's molecular structure types and glycose and lipid metabolism were summarized. Finally, based on the characteristics of KGM, the application of KGM in the main material and ingredients of fat reduction food was reviewed. We hope this work could provide theoretical basis for the study of dietary fiber colloid nutrition science.

Effect of subcritical water temperature on the structure, antioxidant activity and immune activity of polysaccharides from Glycyrrhiza inflata Batalin

In this study, the polysaccharide from Glycyrrhiza inflata Batalin extracted by hot water (HW-GP) was further physically modified with subcritical water to obtain novel polysaccharides (SW-GP). Comparative analysis was conducted to examine the disparities in conformation and bioactivity between HW-GP and SW-GP, aiming to precisely regulate the structure of the polysaccharides and enhance their bioactivity by controlling subcritical water temperature. The results showed that, compared with HW-GP, subcritical water modification (100-160 °C) not only significantly reduced the molecular weight of polysaccharides (from 5.586 × 105 g/mol to 1.484 × 105 g/mol), but also modulated the intermolecular interaction forces, which maintain the conformation of the polysaccharides, including electrostatic and hydrophobic interactions, thereby dynamically transforming the polysaccharide chain conformation from triple helix to random coil, and the strength of the chain conformation shifted from rigid to flexible. In addition, the modification of the SW-GP structure by subcritical water also enhanced its biological activity. SW-GP (140 °C) with low molecular weight and semi-rigid triple helix conformation showed the best scavenging effect on the DPPH, ABTS, and hydroxyl radicals, and exhibited excellent antioxidant activity. SW-GP (130 °C) with medium molecular weight and semi-rigid triple helix conformation significantly promoted the proliferation and phagocytosis of RAW264.7 cells, as well as increased the release levels of NO, TNF-α, IL-6, and IL-1β, and the immunomodulatory activity was much higher than that of other polysaccharides. These findings confirmed the feasibility of using subcritical water temperature as a regulatory feature for the structure and bioactivity of glycyrrhiza polysaccharides, which may have reference significance for the modification of polysaccharides with heightened bioactivity.

Fluorescence probe technique for determining the hydrophobic interactions and critical aggregation concentrations of Gleditsia microphylla gum, circular Gleditsia sinensis gum, and tara gum

Circular Gleditsia sinensis gum, Gleditsia microphylla gum, and tara gum are galactomannans (GMs) with similar mannose/galactose (M/G) molar ratios, which complicates the characterization of physicochemical properties using conventional methods. Herein, the hydrophobic interactions and critical aggregation concentrations (CACs) of the GMs were compared using a fluorescence probe technique, in which the I1/I3 ratio of pyrene indicated polarity changes. With increasing GM concentration, the I1/I3 ratio decreased slightly in dilute solutions below the CAC but decreased sharply in semidilute solutions above the CAC, indicating that the GMs formed hydrophobic domains. However, increases in temperature destroyed the hydrophobic microdomains and increased the CACs. Higher concentrations of salts (SO42-, Cl-, SCN-, and Al3+) promoted hydrophobic microdomain formation, and the CACs in Na2SO4 and NaSCN solutions were lower than those in pure water. Hydrophobic microdomain formation also occurred upon Cu2+ complexation. Although urea addition promoted hydrophobic microdomain formation in dilute solutions, the microdomains were destroyed in semidilute solutions and the CACs increased. The formation or destruction of hydrophobic microdomains depended on the molecular weight, M/G ratio and galactose distribution of GMs. Therefore, the fluorescent probe technique enables the characterization of hydrophobic interactions in GM solutions, which can provide valuable insight into molecular chain conformations.

Comparative study on the effect of inhibitory methods on the color and gelation properties of alkali induced heat-set konjac gel from Amorphophallus bulbifer

As a newly superior konjac variety, the Amorphophallus bulbifer (A. bulbifer) was easily browning during the alkali-induced process. In this study, five different inhibitory methods, such as citric-acid heat pretreatment (CAT), mixed with citric acid (CA), mixed with ascorbic acid (AA), mixed with L-cysteine (CYS), and mixed with potato starch (PS, containing TiO2), were separately used to inhibit the browning of alkali-induced heat-set A. bulbifer gel (ABG). The color and gelation properties were then investigated and compared. Results showed that the inhibitory methods had significant influences on the appearance, color, physicochemical properties, rheological properties, and microstructures of ABG. Among them, the CAT method not only significantly inhibited the browning of ABG (ΔE value dropped from 25.74 to 14.68) but also improved the water-holding capacity, moisture distribution, and thermal stability without damaging the textural properties of ABG. Moreover, SEM revealed that both CAT and adding PS methods could exhibit the more dense gel network structures of ABG than other methods. It was reasonable to conclude that ABG-CAT offered a superior method to prevent browning compared to the other methods based on the texture, microstructure, color, appearance, and thermal stability of the product.

Modulating the structure of lamb myofibrillar protein gel influenced by psyllium husk powder at different NaCl concentrations: Effect of intermolecular interactions

In this study, a strategy involving psyllium husk powder (PHP) was proposed to alleviate the textural deterioration of protein gels under low-sodium conditions. Results revealed that myofibrillar protein (MP) in 0.3 M NaCl could accommodate more PHP to achieve better gels properties compared with that of 0.6 M NaCl. The 3 % addition of PHP could lessen the textural deterioration of gels at 0.3 M NaCl because of the insertion of PHP into the hydrophobic cavity of MP. Consequently, the reduction in protein viscoelasticity and the thermal stability of the head and tail of myosin improved. α-Helix structures unfolded, intermolecular forces formed, and proteins aggregated. Molecular docking predicted hydrogen bonds and hydrophobic interactions as the main forces to stabilize the conformation of composites. Experiments further verified that hydrophobic interactions and disulfide bonds were the main forces that stabilized the structure of MP-PHP composite gels.

Ultrasound-induced changes in rheological behavior and hydrophobic microdomains of Lignosus rhinocerotis polysaccharide

Ultrasound is increasingly applied to modify the structures and physicochemical properties of polysaccharides. Hence, this work investigated the ultrasound-induced changes in the rheological behavior and hydrophobic microdomains of Lignosus rhinocerotis polysaccharide (LRP). With an increase in ultrasonic time, the apparent viscosity, storage modulus, loss modulus, and the final percentage recovery of LRP/water system increased to reach the maximum after 10 min treatment and then decreased. These results indicated that short-term (10 min) ultrasound could increase the strength of the network structure of LRP/water system, while longer-term ultrasound (30 and 60 min) weakened the network structure. The self-healing properties of LRP/water system was not affected by ultrasound treatment according to repeated strain and time sweep data. The critical aggregation concentration of the LRP/water system decreased from 2.5 to 1.8 mg/mL after 10 min ultrasound and the number of hydrophobic microdomains increased, suggesting that ultrasound promoted the hydrophobic aggregation of LRP.

Konjac Glucomannan Induced Retarding Effects on the Early Hydration of Cement

Customarily, retarders serve as the setting time regulators of cement-based composites to meet the demands of various construction environments. However, the limited ability to adjust the setting time restricts the application of polysaccharides in special environments. In this study, we reported a naturally high-efficiency retarder, konjac glucomannan (KGM), and studied the mechanism of its effect on the hydration of ordinary Portland cement. Incorporating KGM could significantly prolong cement hydration without strength damage. Furthermore, the active hydroxyl group (-OH, rich in KGM) could chelate with Ca²⁺ (released from cement hydration) to form a cross-linking network, which is adsorbed on the surface of cement clinker, thereby being conducive to delaying the process of cement hydration and reducing the heat of hydration. The findings of this study are critical to the ongoing efforts to develop polysaccharide-cement-based composite materials for application in various special environments.

Impacts of konjac glucomannan with different modification of degradation or deacetylation on the stress resistance and fitness in Caenorhabditis elegans

The impact of modification in molecules or deacetylation of konjac glucomannan (KGM) on the stress resistance in vivo has rarely been studied systematically. This research studied the effects of KGM with different molecular weights and degrees of deacetylation on the stress resistance and physical fitness of Caenorhabditis elegans. After the nematodes were incubated with different modified KGM, the survival rate of nematodes under oxidative and heat stress, as well as the fertility and locomotion were measured. KGM(2-5) can significantly prolong the mean and maximum lifespan of nematodes in the presence of paraquat. Under heat stress, all partially degraded konjac glucomannan (PDKGM) showed the significant extension of survival rates. Da(1-3) improved the survival rates of nematodes under oxidative stress. Furthermore, genes expression showed that KGM(2-5) and Da(1-3) upregulated the expression of sod-3, hsp-16.2, and atf-7. Taken together, molecular weight reduction or deacetylation of KGM have a significant impact on the stress resistance in vivo. PDKGM applied in stress resistance will be suggested not to exceed 200 kDa and deacylation of KGM will be suggested to be below 50%.

Rheological properties and critical concentrations of a hyperbranched polysaccharide from Lignosus rhinocerotis sclerotia

The application of polysaccharides in the food industry mainly depends on their rheological properties and the polysaccharides in different concentration regions exhibit different rheological properties due to the interactions between polymer chains. Hence, this work investigated the concentration-dependent rheological behavior of Lignosus rhinocerotis polysaccharide (LRP) in water and determined the critical concentrations. The intrinsic viscosity of LRP was 378 ± 32 mL/g and the LRP exhibited more apparent shear-thinning behavior with increasing concentration. The LRP critical overlap and aggregation concentration in water was ~2.5 mg/mL, implicating the formation of hydrophobic regions may result from the aggregation and overlap between hyperbranched LRP molecules. The LRP/water system showed higher storage modulus than loss modulus with slight frequency dependence at the concentration of 15 mg/mL, exhibiting the structured liquid behavior. When the concentration increased from 10 mg/mL to 30 mg/mL, the compliance recovery percentage value increased from 58.51% to 92.30%, indicating the formation of a strong gel network in the LRP/water system. Furthermore, the micro-rheological test revealed that the LRP/water system exhibited a concentration-dependent increase in elasticity and viscosity and deterioration in fluidity.

Characterization of hydrophobic interaction of galactomannan in aqueous solutions using fluorescence-based technique

Fluorescence probing was used to study hydrophobic interactions of galactomannan (GM) obtained from fenugreek gum (FG), guar gum (GG), and locust bean gum (LBG) at different M/G ratios. The I₁/I₃ ratio of pyrene changed from 1.73 to 1.29, 1.22, and 1.29 for FG, GG and LBG, respectively, as the concentration of GM increased from 0.01 to 8.0 g/L at 30 °C. The critical aggregation concentration of FG, GG, and LBG increased from 1.04 to 3.84 g/L, 1.15 to 3.73 g/L, and 0.94 to 3.63 g/L, respectively, as temperature increased from 10 to 70 °C. Addition of Na₂SO₄ and NaSCN increased the I₁/I₃ ratio in dilute solution, but reduced it in semi-dilute solution, whereas adding urea reduced I₁/I₃ in dilute solution but increased it in semi-dilute solution. These results indicated that the CAC of GM, polarity and number of hydrophobic microdomains were highly dependent on the M/G ratio and galactose distribution.

Effect of deacetylated konjac glucomannan on heat-induced structural changes and flavor binding ability of fish myosin

This work investigated the effects of deacetylated konjac glucomannan (DKGM) on heat-induced structural changes and flavor binding in bighead carp myosin. DKGM could cross-link with fish myosin to form a thermostable complex and improve the gel strength of myosin. The incorporation of DKGM increased the surface hydrophobicity and total sulfhydryl content of heat-induced myosin. Increasing DKGM concentrations resulted in a decrease in the absolute zeta potential and a continuous increase in particle size. DKGM addition significantly reduced the α-helical content of myosin with a concomitant increase in β-sheet, β-turn, and random coil content. The binding abilities of myosin to flavors were significantly enhanced by increasing amounts of DKGM, attributing to the accelerative unfolding of myosin secondary structures and the exposure of additional hydrophobic and thiol binding sites. Increased numbers of available hydroxyl groups after DKGM treatment could also cause an increase of flavor adsorption by hydrogen bonding.

Interaction between carboxymethyl pachyman and lotus seedpod oligomeric procyanidins with superior synergistic antibacterial activity

The inhibitory effect of carboxymethyl pachyman (CMP) mixed with lotus seedpod oligomeric procyanidins (LSPC) in certain ratios against E. coli 10899 was determined. Added low concentration of LSPC could improve the antibacterial activity of CMP, and a significant synergistic effect could be observed between them, especially when the concentration of CMP was below its critical concentration (1.35 mg/mL). Then, the interaction between CMP and LSPC was characterized after mixing; the changes in spectral characteristics, thermal properties, crystallinity pattern, molecular weight, chain morphology and microrheological behaviour explained the influence of interaction on the structure of CMP and LSPC. The smaller molecular size, electrostatic interaction and stronger hydrophobic interaction might play important roles in improving the antibacterial activity of mixture. The dissociation constant (K_d) was determined to be 0.102±0.0008 mg/mL using MicroScale Thermophoresis (MST), and the micromorphology was observed by SEM. Therefore, this mixture might be an effective natural bacteriostat.

Construction of Hierarchical Natural Fabric Surface Structure Based on Two-Dimensional Boron Nitride Nanosheets and Its Application for Preparing Biobased Toughened Unsaturated Polyester Resin Composites

It has been a big challenge to prepare the unsaturated polyester resin (UPR) composites with good fire safety, interfacial quality, and impact strength in an environmentally friendly way. In this study, to improve interfacial performance of fabric-reinforced UPR composites, nontoxic two-dimensional hexagonal boron nitride (h-BN) nanosheets were assembled on the surface of ramie fabrics, where sodium alginate acts as a green dispersant to disperse h-BN sheets during the process. Then, the biobased phosphorus-containing toughening agent (PCTA) was synthesized to simultaneously improve the impact strength and fire safety of the composite. With application of h-BN nanosheets-assembled fabric (AF) and 20 wt % of PCTA, the AF/UPR@PCTA₂₀ composite presented the maximum 41.2% decrease in the value of peak heat release rate and a maximum 17.8% decrease in the value of total heat release, which also reached V-0 rating in the vertical burning test. Meanwhile, the AF/UPR@PCTA₂₀ composite showed an obvious increase in limiting oxygen index, from 24.0 to 29.5% compared with RF/UPR. The flame retardant mechanism was investigated from gas phase and condensed phase. Furthermore, compared to neat RF/UPR composite, the AF/UPR@PCTA₂₀ composite showed a significant 68.8% improvement in impact strength, implying an extreme toughening effect of PCTA on UPR composites. The research provides a viable green method for the development of environmentally friendly UPR composites in the future.