Engineering pectin-based hollow nanocapsules for delivery of anticancer drug

Design and In Vitro Activity of Furcellaran/Chitosan Multilayer Microcapsules for the Delivery of Glutathione and Empty Model Multilayer Microcapsules Based on Polysaccharides

In this study, multilayer microcapsules (two-layer and four-layer) based on furcellaran (FUR) and chitosan (CHIT) were produced, enclosing a tripeptide with an antioxidant effect-glutathione-in different concentrations. In addition, for the first time, an empty, four-layer microcapsule based on CHIT and FUR (ECAPS) was obtained, which can be used to contain sensitive, active substances of a hydrophobic nature. Layering was monitored using zeta potential, and the presence of the resulting capsules was confirmed by SEM imaging. In the current study, we also investigated whether the studied capsules had any effect on the Hep G2 cancer cell line. An attempt was also made to identify the possible molecular mechanism(s) by which the examined capsules suppressed the growth of Hep G2 cells. In this report, we demonstrate that the capsules suppressed the growth of cancer cells. This mechanism was linked to the modulation of the AKT/PI3K signaling pathway and the induction of the G2/M arrest cell cycle. Furthermore, the results indicate that the tested multilayer microcapsules induced cell death through an apoptotic pathway.

Preparation and Characterization of Hydrogel Films and Nanoparticles Based on Low-Esterified Pectin for Anticancer Applications

Prospective adjuvant anticancer therapy development includes the establishing of drug delivery systems based on biocompatible and biodegradable carriers. We have designed films and nanoparticles (NPs) based on low-esterified pectin hydrogel using the ionic gelation method. We investigated morphology, nanomechanical properties, biocompatibility and anticancer activity. Hydrogel films are characterized by tunable viscoelastic properties and surface nanoarchitectonics through pectin concentration and esterification degree (DE), expressed in variable pore frequency and diameter. An in vitro study showed a significant reduction in metabolic activity and the proliferation of the U87MG human glioblastoma cell line, probably affected via the adhesion mechanism. Glioma cells formed neurosphere-like conglomerates with a small number of neurites when cultured on fully de-esterified pectin films and they did not produce neurites on the films prepared on 50% esterified pectin. Pectin NPs were examined in terms of size distribution and nanomechanical properties. The NPs' shapes were proved spherical with a mean diameter varying in the range of 90-115 nm, and a negative zeta potential from -8.30 to -7.86 mV, which indicated their stability. The NPs did not demonstrate toxic effect on cells or metabolism inhibition, indicating good biocompatibility. Nanostructured biomaterials prepared on low-esterified pectins could be of interest for biomedical applications in adjuvant anticancer therapy and for designing drug delivery systems.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Design of Tailor-Made Biopolymer-Based Capsules for Biological Application by Combining Porous Particles and Polysaccharide Assembly

Various approaches have been described in the literature to demonstrate the possibility of designing biopolymer particles with well-defined characteristics, such as size, chemical composition or mechanical properties. From a biological point of view, the properties of particle have been related to their biodistribution and bioavailability. Among the reported core-shell nanoparticles, biopolymer-based capsules can be used as a versatile platform for drug delivery purposes. Among the known biopolymers, the present review focuses on polysaccharide-based capsules. We only report on biopolyelectrolyte capsules fabricated by combining porous particles as a template and using the layer-by-layer technique. The review focuses on the major steps of the capsule design, i.e., the fabrication and subsequent use of the sacrificial porous template, multilayer coating with polysaccharides, the removal of the porous template to obtain the capsules, capsule characterisation and the application of capsules in the biomedical field. In the last part, selected examples are presented to evidence the major benefits of using polysaccharide-based capsules for biological purposes.

Carboxymethyl chitosan coated alpha-linolenic acid nanoliposomes: Preparation, stability and release in vitro and in vivo

Nanoliposome encapsulation combined with carboxymethyl chitosan (CMCS) surface decoration was employed to improve physicochemical stability and oral bioavailability of alpha-linolenic acid (ALA). Different nanoliposome systems including ALA-loaded nanoliposomes (ALA-NLs) and CMCS-coated ALA-NLs (CMCS-ALA-NLs) were characterized through dynamic light scattering, transmission electron microscope, Fourier transform infrared spectroscopy and differential scanning calorimetry. The results showed that CMCS-ALA-NLs had good encapsulation efficiency of 79% and layer formation with nanosized spherical carrier. The physicochemical stability of CMCS-ALA-NLs was better than that of ALA-NLs. CMCS-ALA-NLs were able to regulate the release of ALA in a simulated gastrointestinal environment. In vivo testing found that ALA concentration of CMCS-ALA-NLs had an area under the curve of 1.32, which was 1.28 times higher than that of ALA-NLs and 2 times higher than that of ALA-emulsion. The absorption of ALA was improved by CMCS-ALA-NLs. It suggested that CMCS-coated nanoliposomes should be an available delivery strategy for transporting ALA.

Potential of pectin for biomedical applications: a comprehensive review

Pectin is a polysaccharide extracted from various plants, such as apples, oranges, lemons, and it possesses some beneficial effects on human health, including being hypoglycemic and hypocholesterolemic. Therefore, pectin is used in various pharmaceutical and biomedical applications. Meanwhile, its low mechanical strength and fast degradation rate limit its usage as drug delivery devices and tissue engineering scaffolds. To enhance these properties, it can be modified or combined with other organic molecules or polymers and/or inorganic compounds. These materials can be prepared as nano sized drug carriers in the form of spheres, capsules, hydrogels, self assamled micelles, etc., for treatment purposes (mostly cancer). Different composites or blends of pectin can also be produced as membranes, sponges, hydrogels, or 3D printed matrices for tissue regeneration applications. This review is concentrated on the properties of pectin based materials and focus especially on the utilization of these materials as drug carriers and tissue engineering scaffolds, including 3D printed and 3D bioprinted systems covering the studies in the last decade and especially in the last 5 years.

Pharmaceutical and drug delivery applications of pectin and its modified nanocomposites

Due to their natural availability, biocompatibility, biodegradability, nontoxicity, flexibility, as well as improved structural and functional characteristics, pectin and pectin-based nanocomposites have become an interesting area of numerous researchers. Pectin is a polysaccharide that comes from plants and is used in a variety of products. The significance of pectin polysaccharide and its modified nanocomposites in a number of applications has been shown in numerous reviews. On their uses in pharmaceutical and medication delivery, there are, however, few review publications. The majority of papers on pectin polysaccharide do not structure their explanations of drug distribution and medicinal application. The biological application of pectin nanocomposite is also explained in this review, along with a recent publication. As a result, the goal of this review was in-depth analysis to summarize biological application of pectin and its modified nanocomposites. Due to their exceptional physicochemical and biological characteristics, pectin and its nanocomposites are remarkable materials for medicinal applications. In addition to enhancing the immune system, controlling blood cholesterol, and other things, they have been shown to have anticancer, antidiabetic, antioxidant, anti-inflammatory, immunomodulatory, and antibacterial properties. Because of their biocompatibility and properties that allow for regulated release, they have also received a lot of interest as drug carriers in targeted drug delivery systems. They have been used to administer medications to treat cancer, inflammation, pain, Alzheimer's, bacteria, and relax muscles. This review found that pectin and its derivatives have better drug delivery efficiency and are viable candidates for a wide range of medicinal applications. It has been advised to conduct further research on the subject of toxicity in order to produce commercial formulations that can serve as both therapeutic agents and drug carriers.

Hollow Multicomponent Capsules for Biomedical Applications: A Comprehensive Review

Hollow capsules with multi-shelled or multicomponent structures are essential materials for various applications. Biomedical applications like disease diagnosis, therapy, and monitoring have special significance as they aim to improve health conditions. This review demonstrated a comprehensive overview of hollow, multifunctional structures incorporating meaningful use of nanotechnology and its’ unique prospects in medicine such as patient-specific treatment, multimodal imaging, multimodal therapy, simultaneous delivery of drugs and imaging probes, and actively targeted delivery. The internal hollow cavity provides safe and controlled drug release while also enabling transport of functional moieties to target sites. This review explored the performance of different organic, inorganic, and metallic multicomponent capsules that have been reported for biomedical applications, mainly diagnostic imaging and drug delivery. Material compositions, morphologies, and synthesis strategies involved in fabricating such multifunctional systems have been discussed in detail. It is expected that with time, more sophisticated and precise systems will come to light as the outcome of ongoing concentrated research efforts.

Swelling, Protein Adsorption, and Biocompatibility In Vitro of Gel Beads Prepared from Pectin of Hogweed Heracleum sosnówskyi Manden in Comparison with Gel Beads from Apple Pectin

The study aims to develop gel beads with improved functional properties and biocompatibility from hogweed (HS) pectin. HS4 and AP4 gel beads were prepared from the HS pectin and apple pectin (AP) using gelling with calcium ions. HS4 and AP4 gel beads swelled in PBS in dependence on pH. The swelling degree of HS4 and AP4 gel beads was 191 and 136%, respectively, in PBS at pH 7.4. The hardness of HS4 and AP4 gel beads reduced 8.2 and 60 times, respectively, compared with the initial value after 24 h incubation. Both pectin gel beads swelled less in Hanks’ solution than in PBS and swelled less in Hanks’ solution containing peritoneal macrophages than in cell-free Hanks’ solution. Serum protein adsorption by HS4 and AP4 gel beads was 118 ± 44 and 196 ± 68 μg/cm² after 24 h of incubation. Both pectin gel beads demonstrated low rates of hemolysis and complement activation. However, HS4 gel beads inhibited the LPS-stimulated secretion of TNF-α and the expression of TLR4 and NF-κB by macrophages, whereas AP4 gel beads stimulated the inflammatory response of macrophages. HS4 gel beads adsorbed 1.3 times more LPS and adhered to 1.6 times more macrophages than AP4 gel beads. Thus, HS pectin gel has advantages over AP gel concerning swelling behavior, protein adsorption, and biocompatibility.

Transport of Magnetic Polyelectrolyte Capsules in Various Environments

Microcapsules consisting of eleven layers of polyelectrolyte and one layer of iron oxide nanoparticles were fabricated. Two types of nanoparticles were inserted as one of the layers within the microcapsule’s walls: Fe2O3, ferric oxide, having a mean diameter (Ø) of 50 nm and superparamagnetic Fe3O4 having Ø 15 nm. The microcapsules were suspended in liquid environments at a concentration of 108 caps/mL. The suspensions were pumped through a tube over a permanent magnet, and the accumulation within a minute was more than 90% of the initial concentration. The design of the capsules, the amount of iron embedded in the microcapsule, and the viscosity of the transportation fluid had a rather small influence on the accumulation capacity. Magnetic microcapsules have broad applications from cancer treatment to molecular communication.

Characterization and Biocompatibility Properties In Vitro of Gel Beads Based on the Pectin and κ-Carrageenan

This study aimed to investigate the influence of kappa (κ)-carrageenan on the initial stages of the foreign body response against pectin gel. Pectin-carrageenan (P-Car) gel beads were prepared from the apple pectin and κ-carrageenan using gelling with calcium ions. The inclusion of 0.5% κ-carrageenan (Car0.5) in the 1.5 (P1.5) and 2% pectin (P2) gel formulations decreased the gel strength by 2.5 times. Car0.5 was found to increase the swelling of P2 gel beads in the cell culture medium. P2 gel beads adsorbed 30–42 mg/g of bovine serum albumin (BSA) depending on pH. P2-Car0.2, P2-Car0.5, and P1.5-Car0.5 beads reduced BSA adsorption by 3.1, 5.2, and 4.0 times compared to P2 beads, respectively, at pH 7. The P1.5-Car0.5 beads activated complement and induced the haemolysis less than gel beads of pure pectin. Moreover, P1.5-Car0.5 gel beads allowed less adhesion of mouse peritoneal macrophages, TNF-α production, and NF-κB activation than the pure pectin gel beads. There were no differences in TLR4 and ICAM-1 levels in macrophages treated with P and P-Car gel beads. P2-Car0.5 hydrogel demonstrated lower adhesion to serous membrane than P2 hydrogel. Thus, the data obtained indicate that the inclusion of κ-carrageenan in the apple pectin gel improves its biocompatibility.

Biopolymer-Based Multilayer Capsules and Beads Made via Templating: Advantages, Hurdles and Perspectives

One of the undeniable trends in modern bioengineering and nanotechnology is the use of various biomolecules, primarily of a polymeric nature, for the design and formulation of novel functional materials for controlled and targeted drug delivery, bioimaging and theranostics, tissue engineering, and other bioapplications. Biocompatibility, biodegradability, the possibility of replicating natural cellular microenvironments, and the minimal toxicity typical of biogenic polymers are features that have secured a growing interest in them as the building blocks for biomaterials of the fourth generation. Many recent studies showed the promise of the hard-templating approach for the fabrication of nano- and microparticles utilizing biopolymers. This review covers these studies, bringing together up-to-date knowledge on biopolymer-based multilayer capsules and beads, critically assessing the progress made in this field of research, and outlining the current challenges and perspectives of these architectures. According to the classification of the templates, the review sequentially considers biopolymer structures templated on non-porous particles, porous particles, and crystal drugs. Opportunities for the functionalization of biopolymer-based capsules to tailor them toward specific bioapplications is highlighted in a separate section.

Improving Physicochemical Stability of Quercetin-Loaded Hollow Zein Particles with Chitosan/Pectin Complex Coating

Hollow nanoparticles are preferred over solid ones for their high loading capabilities, sustained release and low density. Hollow zein particles are susceptible to aggregation with a slight variation in the ionic strength, pH and temperature of the medium. This study was aimed to fabricate quercetin-loaded hollow zein particles with chitosan and pectin coating to improve their physicochemical stability. Quercetin as a model flavonoid had a loading efficiency and capacity of about 86–94% and 2.22–5.89%, respectively. Infrared and X-ray diffraction investigations revealed the interaction of quercetin with zein and the change in its physical state from crystalline to amorphous upon incorporation in the composite particles. The chitosan/pectin coating improved the stability of quercetin-loaded hollow zein particles against heat treatment, sodium chloride and in a wide range of pH. The complex coating protected quercetin that was encapsulated in hollow zein particles from free radicals in the aqueous medium and enhanced its DPPH radical scavenging ability. The entrapment of quercetin in the particles improved its storage and photochemical stability. The storage stability of entrapped quercetin was enhanced both at 25 and 45 °C in hollow zein particles coated with chitosan and pectin. Therefore, composite hollow zein particles fabricated with a combination of polysaccharides can expand their role in the encapsulation, protection and delivery of bioactive components.

Polymeric nanocapsules: A review on design and production methods for pharmaceutical purpose

Polymeric nanocapsules have extensive application potential in medical, biological, and pharmaceutical fields, and, therefore, much research has been dedicated to their production. Indeed, production protocols and the materials used are decisive for obtaining the desired nanocapsules characteristics and biological performance. In addition to that, several technological strategies have been developed in the last decade to improve processing techniques and form more valuable nanocapsules. This review provides a guide to current methods for developing polymeric nanocapsules, reporting aspects to be considered when choosing appropriate materials, and discussing different ways to produce nanocapsules for superior performances.

Surface decoration of neohesperidin-loaded nanoliposome using chitosan and pectin for improving stability and controlled release

The aim of this study was to improve the physicochemical stability of neohesperidin (NH) using nanoliposomal encapsulation in association with surface decoration strategy employing chitosan (CH) and pectin (P). Different nanoliposomal systems, i.e. NH-loaded nanoliposome (NH-NL), CH-coated NH-NL (CH-NH-NL), and P-coated CH-NH-NL (P-CH-NH-NL) were characterized through DLS, HPLC, TEM, and FTIR. The results confirmed good encapsulation efficiency (>90%) and successful layer formation with nano-sized and spherical carrier. Both CH-NL and P-CH-NL exhibited better physicochemical stability than NL under storage, thermal, pH, ionic, UV, oxidative, and serum conditions. In vitro mucin adsorption study revealed that CH-NL (60%) was more effective in mucoadhesion followed by P-CH-NL (46%) and NL (41%). Furthermore, P-CH-NL showed better performance in NH retention under different food simulants compared to CH-NH-NL and NH-NL, in which the release was mainly governed by the diffusion process. Thus, the P-CH conjugated nanoliposome could be a promising nano-carrier for neohesperidin.

Improving the physicochemical stability and functionality of nanoliposome using green polymer for the delivery of pelargonidin-3-O-glucoside

This study aimed to improve the physicochemical stability of nanoliposome (NL) with enhanced functionality for the delivery of Pelargonidin-3-O-glucoside (P3G) using biopolymers, i.e. chitosan (CH) and pectin (P). In this study, we successfully developed stabilized liposomal carriers, i.e. CH-conjugated NL (CH-NL) and P-conjugated CH-NL (P-CH-NL) using an optimum concentration of CH (0.6 wt%) and P (0.5 wt%). Results revealed that P-CH-NL had better physical stability to salt and pH with maximum P3G retention (>97%) under oxidative, thermal, and UV conditions. Nanoliposomes were more stable under refrigerated-storage and ensured high P3G retention (>96%). In vitro mucoadhesion study revealed that CH-NL had better mucin adsorption efficiency (59.72%) followed by P-CH-NL and NL. Furthermore, CH-NL and P-CH-NL alternatively had better stability to serum than NL. Taken together, the stabilization of nanoliposome using chitosan and pectin can be a promising approach for the delivery of hydrophilic compounds in association with enhanced stability and functionality.

Pectin polymers for colon-targeted antitumor drug delivery

The use of chemotherapeutic drugs in the treatment of malignant tumors is always associated with the severe side effects negatively affecting all organs and systems in human body. One of the approaches for reduction of the toxic influence and enhancement of the antitumor drug administration efficiency is supposed to be the use of the biopolymer delivery systems. Pectins are considered the most promising components for colon targeted drug dosage forms as they are stable in the changing gastrointestinal media and easily degraded by pectinases produced by colonic microflora. A various range of the pectin-containing delivery systems were developed contributing higher concentration of the active drug molecules in particular site inside intestine and their lower blood level resulting in lowered risk of the severe side effects. This review discusses the various forms of the pectin-based materials such as hydrogels, tablets and pellets, films, microspheres, microsponges, nanoparticles, etc. as drug delivery device and attempted to report the vast literature available on pectin biopolymers in drug delivery applications.

Polymeric Nanocapsules as Nanotechnological Alternative for Drug Delivery System: Current Status, Challenges and Opportunities

Polymer-based nanocapsules have been widely studied as a potential drug delivery system in recent years. Nanocapsules-as one of kind nanoparticle-provide a unique nanostructure, consisting of a liquid/solid core with a polymeric shell. This is of increasing interest in drug delivery applications. In this review, nanocapsules delivery systems studied in last decade are reviewed, along with nanocapsule formulation, characterizations of physical/chemical/biologic properties and applications. Furthermore, the challenges and opportunities of nanocapsules applications are also proposed.

Glycosaminoglycan-Inspired Biomaterials for the Development of Bioactive Hydrogel Networks

Glycosaminoglycans (GAG) are long, linear polysaccharides that display a wide range of relevant biological roles. Particularly, in the extracellular matrix (ECM) GAG specifically interact with other biological molecules, such as growth factors, protecting them from proteolysis or inhibiting factors. Additionally, ECM GAG are partially responsible for the mechanical stability of tissues due to their capacity to retain high amounts of water, enabling hydration of the ECM and rendering it resistant to compressive forces. In this review, the use of GAG for developing hydrogel networks with improved biological activity and/or mechanical properties is discussed. Greater focus is given to strategies involving the production of hydrogels that are composed of GAG alone or in combination with other materials. Additionally, approaches used to introduce GAG-inspired features in biomaterials of different sources will also be presented.

Alginate hydrogel enriched with Ambystoma mexicanum epidermal lipoxygenase-loaded pectin nanoparticles for enhanced wound healing

Epidermal lipoxygenase enzyme extracted from Ambystoma mexicanum (AmbLOXe) is known to accelerate the wound-healing process. AmbLOXe as a protein suffers from inactivation and losing its activity during formulation. Therefore, a delivery system that protects AmbLOXe from inactivation and preserves its activity is needed. We prepared AmbLOXe-loaded pectin nanoparticles (AmbLOXe Pec-NPs) and placed them into an alginate hydrogel. AmbLOXe Pec-NPs incorporation into the alginate hydrogel provides a means for controlled and sustained delivery of AmbLOXe to the wound site. Furthermore, the suitable swelling behavior and mechanical properties of AmbLOXe Pec-NPs alginate hydrogel make it feasible for clinical use. AmbLOXe Pec-NPs alginate hydrogel significantly enhanced the wound-healing process on the rat full-thickness excisional wounds, increased the rate of wound closure, enhanced the re-epithelialization and decreased the incidence of abnormal scarring. AmbLOXe Pec-NPs alginate hydrogel can be proposed as an effective wound hydrogel for improving wound healing with minimal scarring.

Polysaccharide-based tissue-engineered vascular patches

Coronary artery and peripheral vascular diseases are the leading cause of morbidity and mortality worldwide and often require surgical intervention to replace damaged blood vessels, including the use of vascular patches in endarterectomy procedures. Tissue engineering approaches can be used to obtain biocompatible and biodegradable materials directed to this application. In this work, dense or porous scaffolds constituted of chitosan (Ch) complexed with alginate (A) or pectin (P) were fabricated and characterized considering their application as tissue-engineered vascular patches. Scaffolds fabricated with alginate presented higher culture medium uptake capacity (up to 17 g/g) than materials produced with pectin. A degradation study of the patches in the presence of lysozyme showed longer-term stability for Ch-P-based scaffolds. Pectin-containing matrices presented higher elastic modulus (around 280 kPa) and ability to withstand larger deformations. Moreover, these materials demonstrated better performance when tested for hemocompatibility, with lower levels of platelet adhesion and activation. Human smooth muscle cells (HSMC) adhered, spread and proliferated better on matrices produced with pectin, probably as a consequence of cell response to higher stiffness of this material. Thus, the outcomes of this study demonstrate that Ch-P-based scaffolds present superior characteristics for the application as vascular patches. Despite polysaccharides are yet underrated in this field, this work shows that biocompatible tridimensional structures based on these polymers present high potential to be applied for the reconstruction and regeneration of vascular tissues.

Nano-scale polysaccharide materials in food and agricultural applications

Potential applications of nanotechnology in food and agriculture include: (1) the encapsulation of functional compounds; (2) production of reinforcing materials; (3) delivery of nutraceuticals in foods; (4) food safety, for detection and control of chemical and microbiological risks; (5) active and intelligent food packaging; (6) incorporation of protective substances of seeds; (7) addition of nutrients in the soil; (8) use of controlled release pesticides. Natural polysaccharides and their derivatives are widely used in the production of nano-scale materials. This chapter examines, the use of polysaccharides, such as starch, cellulose, lignin, pectin, gums, and cyclodextrins for the production of nano-scale materials, including nanocrystals, nanoemulsions, nanocomplexes, nanocapsules, and nanofibers.

Nanocarriers and Their Loading Strategies

Nanocarriers are of paramount significance for drug delivery and nanomedicine technology. Given the imperfect systems and nonideal therapeutic effects, there are works to be done in synthesis as much as in biological studies, if not more so. Building the foundation of synthesis would offer more tools and deeper insights for exploring the biological systems with extreme complexity. This review aims at a broad-scope summary and classification of nanocarriers for drug delivery, with focus on the synthetic strategy and structural implications. The nanocarriers are divided into four categories according to the loading principle: molecular-level loading, surface loading, matrix loading, and cavity loading systems. Making comparisons across diverse nanocarrier systems would make it easier to see the fundamental characteristics, from where the weakness can be addressed and the strengths combined. The systematic comparisons may also inspire new ideas and methods.

pH Variation as a Simple and Selective Pathway for Obtaining Nanoparticle or Nanocapsule Polysaccharides

The fabrication of polysaccharides to be nanoparticles or nanocapsules is quite specific due to various parameters and factors. The present work demonstrates a simple pathway to selectively prepare the ionic polysaccharide flakes to be nanoparticles or nanocapsules. The systematic studies on the model cases of cationic polysaccharide (i.e., chitosan) and anionic polysaccharide (i.e., alginate) confirm that p K_a is the key point to tune the polysaccharides to be nanoparticles or nanocapsules. When the ionic polysaccharides were in an oil/water emulsion system, the pH close to p K_a leads to the densely packed polysaccharide chains under the hydrogen bond networks, and as a result the cross-link occurs all through the chains to be nanoparticles. On the other hand, when pH was adjusted to the lower or higher than p K_a depending on the types of ionic polysaccharide, the polysaccharide chains are under charge-charge repulsive force, resulting in the alignment of polysaccharide chains to be hollow nanospheres, and at that time the cross-link initiates the formation of nanocapsules. The present work, for the first time, clarifies that pH variation is the key to selectively prepare nanoparticles or nanocapsules, and this is important for delivery systems, coatings, sensors, and so forth.

Facile fabrication of a novel hybrid nanoparticles by self-assembling based on pectin-doxorubicin conjugates for hepatocellular carcinoma therapy

Hepatocellular carcinoma (HCC) is one of the greatest public health problems worldwide, and chemotherapy remains the major approach for the HCC treatment. Doxorubicin (DOX) is one of the anthracycline antibiotics but its clinical use is limited due to its severe cardiotoxicity. In this study, novel hybrid nanoparticles by self-assembling based on pectin-doxorubicin conjugates (PDC-NPs) were fabricated for HCC treatment. The stabilized structure of the PDC-NPs was characterized by methylene blue absorption, the size, zeta potential and the morphology, which was investigated by Zetasizer nanoparticle analyzer and transmission electron microscope (TEM), of nanoparticles. The PDC-NPs achieved a sustained and prolonged release ability, which was illustrated with in vitro drug release profiles, anti-cell proliferation study, cellular uptake assay and in vivo pharmacokinetics analysis. Biocompatibility of the PDC-NPs was assessed with bovine serum albumin (BSA) adsorption test, hemolysis activity examination and viability evaluation of human umbilical vein endothelial cells. Importantly, in vivo studies of the PDC-NPs, which were performed in the athymic BALB/c nude mice, demonstrated that the PDC-NPs significantly reduced the lethal side effect of DOX. Additionally, the H&E staining and serum biochemistry study further confirmed the excellent biological security of the PDC-NPs.

Drug Release Properties of Diflunisal from Layer-By-Layer Self-Assembled κ-Carrageenan/Chitosan Nanocapsules: Effect of Deposited Layers

Engineering of multifunctional drug nanocarriers combining stability and good release properties remains a great challenge. In this work, natural polymers κ-carrageenan (κ-CAR) and chitosan (CS) were deposited onto olive oil nanoemulsion droplets (NE) via layer-by-layer (LbL) self-assembly to study the release mechanisms of the anti-inflammatory diflunisal (DF) as a lipophilic drug model. The nano-systems were characterized by dynamic light scattering (DLS), zeta potential (ζ-potential) measurements, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (XEDS) and Fourier transform infrared spectroscopy (FTIR) to confirm the NE-coating with polymer layers. In addition, kinetic release studies of DF were developed by the dialysis diffusion bag technique. Mathematical models were applied to investigate the release mechanisms. The results showed that stable and suitably sized nanocapsules (~300 nm) were formed. Also, the consecutive adsorption of polyelectrolytes by charge reversal was evidenced. More interestingly, the drug release mechanism varied depending on the number of layers deposited. The nanosized systems containing up to two layers showed anomalous transport and first order kinetics. Formulations with three and four layers exhibited Case II transport releasing diflunisal with zero order kinetics. Hence, our results suggest that these polyelectrolyte nanocapsules have great potential as a multifunctional nanocarrier for drug delivery applications.

Engineering Polyzwitterion and Polydopamine Decorated Doxorubicin-Loaded Mesoporous Silica Nanoparticles as a pH-Sensitive Drug Delivery

Multifunctional drug carriers have great applications in biomedical field. In this study, we introduced both polydopamine (PDA) and zwitterionic polymer of poly(3-(3-methacrylamidopropyl-(dimethyl)-ammonio)propane-1-sulfonate) (PSPP) onto the surface of mesoporous silica nanoparticles (MSNs) to develop a novel nanoparticle (MSNs@PDA-PSPP), which was employed as a new kind of drug carrier for the delivery of doxorubicin (DOX). The PDA coating, as a gatekeeper, could endow the drug carrier with pH-sensitive drug release performance. The outermost PSPP layer would make the drug carrier possess protein resistance performance. The chemical structure and properties were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS) and thermogravimetric analysis (TGA). MSNs@PDA-PSPP could keep good colloidal stability within 72 h in phosphate buffered saline (PBS) and protein solutions. Meanwhile, MSNs@PDA-PSPP exhibited a high drug loading for DOX. In vitro drug release experiments suggested MSNs-DOX@PDA-PSPP exhibited pH-dependent drug release behaviors. Besides, MSNs@PDA-PSPP had no cytotoxicity to human hepatocellular carcinoma cells (HepG2 cells) even at a concentration of 125 µg/mL. More importantly, cellular uptake and in vitro anticancer activity tests suggested that MSNs-DOX@PDA-PSPP could be taken up by HepG2 cells and DOX could be successfully released and delivered into the cell nuclei. Taken together, MSNs@PDA-PSPP have great potential in the biomedical field.

Hybrid pectin-Fe3+/polyacrylamide double network hydrogels with excellent strength, high stiffness, superior toughness and notch-insensitivity

The lack of sufficient mechanical properties restricts the application of polysaccharide-based hydrogels in the field of biomedicine, especially load-bearing tissue repair. Nowadays, double network (DN) hydrogels have aroused great interest through special cooperation between two contrasting networks. Inspired by this idea, here, we devised a new strategy to prepare a pectin-Fe³⁺/polyacrylamide hybrid DN hydrogel using a simple two-step method. The introduction of Fe³⁺ ions into a pectin network to produce strong reversible ionic complexation, results in excellent toughness. Under optimal conditions, our hybrid DN hydrogels possessed tensile strength as high as 0.9 MPa, corresponding to a high strain of 1300%. Besides, our hybrid DN hydrogels also exhibited superb stiffness (elastic modulus ∼ 1.46 MPa), toughness (fracture energy ∼ 3785 J m^-2), and water absorption capacity (85%). Loading-unloading tests showed that the internal fracture process of the hydrogels was continuous. Owing to the reversible structure of Fe³⁺-pectin complexation, the hybrid DN hydrogels also showed good fatigue resistance, notch-insensitivity and recoverability. This type of polysaccharide-based hydrogel has potential to broaden the application in the load-bearing tissue repair field.