From 2D to 3D: The morphology, proliferation and differentiation of MC3T3-E1 on silk fibroin/chitosan matrices

Physiological oxygen measurements in vitro-Schrödinger's cat in 3D cell biology

After the development of 3D cell culture methods in the middle of the last century and the plethora of data generated with this culture configuration up to date, it could be shown that a three-dimensional arrangement of cells in most of the cases leads to a more physiological behavior of the generated tissue. However, a major determinant for an organotypic function, namely, the dissolved oxygen concentration in the used in vitro-system, has been neglected in most of the studies. This is due to the fact that the oxygen measurement in the beginning was simply not feasible and, if so, disturbed the measurement and/or the in vitro-system itself. This is especially true for the meanwhile more widespread use of 3D culture systems. Therefore, the tissues analyzed by these techniques can be considered as the Schrödinger's cat in 3D cell biology. In this perspective paper we will outline how the measurement and, moreover, the regulation of the dissolved oxygen concentration in vitro-3D culture systems could be established at all and how it may be possible to determine the oxygen concentration in organoid cultures and the respiratory capacity via mito stress tests, especially in spheroids in the size range of a few hundred micrometers, under physiological culture conditions, without disturbances or stress induction in the system and in a high-throughput fashion. By this, such systems will help to more efficiently translate tissue engineering approaches into new in vitro-platforms for fundamental and applied research as well as preclinical safety testing and clinical applications.

Biomedical applications of chitosan/silk fibroin composites: A review

Natural polymers have been used in the biomedical fields for decades, mainly derived from animals and plants with high similarities with biomacromolecules in the human body. As an alkaline polysaccharide, chitosan (CS) attracts much attention in tissue regeneration and drug delivery with favorable biocompatibility, biodegradation, and antibacterial activity. However, to overcome its mechanical properties and degradation behavior drawbacks, a robust fibrous protein-silk fibroin (SF) was introduced to prepare the CS/SF composites. Not only can CS be combined with SF via the amide and hydrogen bond formation, but also their functions are complementary and tunable with the blending ratio. To further improve the performances of CS/SF composites, natural (e.g., hyaluronic acid and collagen) and synthetic biopolymers (e.g., polyvinyl alcohol and hexanone) were incorporated. Also, the CS/SF composites acted as slow-release carriers for inorganic non-metals (e.g., hydroxyapatite and graphene) and metal particles (e.g., silver and magnesium), which could enhance cell functions, facilitate tissue healing, and inhibit bacterial growth. This review presents the state-of-the-art and future perspectives of different biomaterials combined with CS/SF composites as sponges, hydrogels, membranes, particles, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a multitude of applications.

Revolutionizing Disease Modeling: The Emergence of Organoids in Cellular Systems

Cellular models have created opportunities to explore the characteristics of human diseases through well-established protocols, while avoiding the ethical restrictions associated with post-mortem studies and the costs associated with researching animal models. The capability of cell reprogramming, such as induced pluripotent stem cells (iPSCs) technology, solved the complications associated with human embryonic stem cells (hESC) usage. Moreover, iPSCs made significant contributions for human medicine, such as in diagnosis, therapeutic and regenerative medicine. The two-dimensional (2D) models allowed for monolayer cellular culture in vitro; however, they were surpassed by the three-dimensional (3D) cell culture system. The 3D cell culture provides higher cell-cell contact and a multi-layered cell culture, which more closely respects cellular morphology and polarity. It is more tightly able to resemble conditions in vivo and a closer approach to the architecture of human tissues, such as human organoids. Organoids are 3D cellular structures that mimic the architecture and function of native tissues. They are generated in vitro from stem cells or differentiated cells, such as epithelial or neural cells, and are used to study organ development, disease modeling, and drug discovery. Organoids have become a powerful tool for understanding the cellular and molecular mechanisms underlying human physiology, providing new insights into the pathogenesis of cancer, metabolic diseases, and brain disorders. Although organoid technology is up-and-coming, it also has some limitations that require improvements.

Three-Dimensional Silk Fibroin/Chitosan Based Microscaffold for Anticancer Drug Screening

Traditional monolayer cell cultures often fail to accurately predict the anticancer activity of drug candidates, as they do not recapitulate the natural microenvironment. Recently, three-dimensional (3D) culture systems have been increasingly applied to cancer research and drug screening. Materials with good biocompatibility are crucial to create a 3D tumor microenvironment involved in such systems. In this study, natural silk fibroin (SF) and chitosan (CS) were selected as the raw materials to fabricate 3D microscaffolds; Besides, sodium tripolyphosphate (TPP), and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) were used as cross-linking agents. The physicochemical properties of obtained scaffolds were characterized with kinds of testing methods, including emission scanning electron microscopy, x-ray photoelectron spectroscopy, fourier transform infrared spectroscopy, water absorption, and swelling ratio analysis. Cancer cell lines (LoVo and MDA-MB-231) were then seeded on scaffolds for biocompatibility examination and drug sensitivity tests. SEM results showed that EDC cross-linked scaffolds had smaller and more uniform pores with great interconnection than the TPP cross-linked scaffolds, and the EDC cross-linked scaffold exhibited a water absorption ratio around 1000% and a swelling ratio of about 72%. These spatial structures and physical properties could provide more adhesion sites and sufficient nutrients for cell growth. Moreover, both LoVo and MDA-MB-231 cells cultured on the EDC cross-linked scaffold exhibited good adhesion and spreading. CCK8 results showed that increased chemotherapeutic drug sensitivity was observed in 3D culture compared with 2D culture, particularly in the condition of low drug dose (<1  μ M). The proposed SF/CS microscaffold can provide a promising in vitro platform for the efficacy prediction and sensitivity screening of anticancer drugs.

A quantitative analysis of cell bridging kinetics on a scaffold using computer vision algorithms

Tissue engineering involves the seeding of cells into a structural scaffolding to regenerate the architecture of damaged or diseased tissue. To effectively design a scaffold, an understanding of how cells collectively sense and react to the geometry of their local environment is needed. Advances in the development of melt electro-writing have allowed micron and submicron polymeric fibres to be accurately printed into porous, complex and three-dimensional structures. By using melt electrowriting, we created a geometrically relevant in vitro scaffold model to study cellular spatial-temporal kinetics. These scaffolds were paired with custom computer vision algorithms to investigate cell nuclei, cell membrane actin and scaffold fibres over different pore sizes (200-600 µm) and time points (28 days). We find that cells proliferated much faster in the smaller (200 µm) pores which halved the time until confluence versus larger (500 and 600 µm) pores. Our analysis of stained actin fibres revealed that cells were highly aligned to the fibres and the leading edge of the pore filling front, and we found that cells behind the leading edge were not aligned in any particular direction. This study provides a systematic understanding of cellular spatial temporal kinetics within a 3D in vitro model to inform the design of more effective synthetic tissue engineering scaffolds for tissue regeneration. STATEMENT OF SIGNIFICANCE: Advances in the development of melt electro-writing have allowed micron and submicron polymeric fibres to be accurately printed into porous, complex and three-dimensional structures. By using melt electrowriting, we created a geometrically relevant in vitro model to study cellular spatial-temporal kinetics to provide a systematic understanding of cellular spatial temporal kinetics within a 3D in vitro model. The insights presented in this work help to inform the design of more effective synthetic tissue engineering scaffolds by reducing cell culture time; which is valuable information for the implant or lab-grown-meat industries.

Bioactive Silk Fibroin-Based Hybrid Biomaterials for Musculoskeletal Engineering: Recent Progress and Perspectives

Musculoskeletal engineering has been considered as a promising approach to customize regenerated tissue (such as bone, cartilage, tendon, and ligament) via a self-healing performance. Recent advances have demonstrated the great potential of bioactive materials for regenerative medicine. Silk fibroin (SF), a natural polymer, is regarded as a remarkable bioactive material for musculoskeletal engineering thanks to its biocompatibility, biodegradability, and tunability. To improve tissue-engineering performance, silk fibroin is hybridized with other biomaterials to form silk-fibroin-based hybrid biomaterials, which achieve superior mechanical and biological performance. Herein, we summarize the recent development of silk-based hybrid biomaterials in musculoskeletal tissue with reasonable generalization and classification, mainly including silk fibroin-based inorganic and organic hybrid biomaterials. The applied inorganics are composed of calcium phosphate, graphene oxide, titanium dioxide, silica, and bioactive glass, while the polymers include polycaprolactone, collagen (or gelatin), chitosan, cellulose, and alginate. This article mainly focuses on the physical and biological performances both in vitro and in vivo study of several common silk-based hybrid biomaterials in musculoskeletal engineering. The timely summary and highlight of silk-fibroin-based hybrid biomaterials will provide a research perspective to promote the further improvement and development of silk fibroin hybrid biomaterials for improved musculoskeletal engineering.

3D Printing of Pharmaceutical Application: Drug Screening and Drug Delivery

Advances in three-dimensional (3D) printing techniques and the development of tailored biomaterials have facilitated the precise fabrication of biological components and complex 3D geometrics over the past few decades. Moreover, the notable growth of 3D printing has facilitated pharmaceutical applications, enabling the development of customized drug screening and drug delivery systems for individual patients, breaking away from conventional approaches that primarily rely on transgenic animal experiments and mass production. This review provides an extensive overview of 3D printing research applied to drug screening and drug delivery systems that represent pharmaceutical applications. We classify several elements required by each application for advanced pharmaceutical techniques and briefly describe state-of-the-art 3D printing technology consisting of cells, bioinks, and printing strategies that satisfy requirements. Furthermore, we discuss the limitations of traditional approaches by providing concrete examples of drug screening (organoid, organ-on-a-chip, and tissue/organ equivalent) and drug delivery systems (oral/vaginal/rectal and transdermal/surgical drug delivery), followed by the introduction of recent pharmaceutical investigations using 3D printing-based strategies to overcome these challenges.

Silk fibroin/chitosan/TGF-β1-loaded microsphere scaffolds for cartilage reparation

BACKGROUND

Transforming growth factor-β1 (TGF-β1) plays an important role in chondrocyte growth and the synthesis of extracellular matrix (ECM). Due to the rapid metabolism, controlled release systems for TGF-β1 have attracted increasing interest recently.

OBJECTIVE

In this study, a silk fibroin (SF)/chitosan (CS) scaffold incorporated with TGF-β1-loaded microspheres (MSs) was created for cartilage reparation.

METHOD

The optimal proportion of the SF/CS composite scaffold was determined by evaluating their micromorphology and the proliferation rate of fibroblasts on the surface. Then, SF/CS/TGF-β1-loaded MS scaffolds were prepared by the adsorption method. TGF-β1 release capacity, degradation patterns, cytocompatibility and in vivo implantation were evaluted.

RESULTS

The SF/CS/TGF-β1-loaded MS scaffold showed good TGF-β1 release over more than 16 days, which could sequentially stimulate chondrocyte synthetic activity. In vitro cell proliferation experiments showed the SF/CS/TGF-β1-loaded MS scaffold could promote chondrocytes adhesion, growth, proliferation and maintained the cellular morphology. An in vivo study demonstrated that a low inflammatory response was observed in rats and that the materials exhibited good biocompatibility.

CONCLUSION

the results indicated that our SF/CS/TGF-β1-loaded MS scaffold constitute a promising therapeutic option for cartilage reparation.

Protective effect of brain-derived neurotrophic factor and neurotrophin-3 overexpression by adipose-derived stem cells combined with silk fibroin/chitosan scaffold in spinal cord injury

Objectives: Spinal cord injury (SCI) is a most debilitating traumatic injury, and cytotherapy is a promising alternative treatment strategy. Here we investigated the effect and mechanism of adipose-derived stem/stromal cells (ASCs) with overexpressing brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT3) (BDNF-NT3) in combination with silk fibroin/chitosan scaffold (SFCS) in SCI.Methods: Female Sprague-Dawley rats were used as an SCI model. SFCS,SFCS and ASCs, or ASCs overexpressing NT3, BDNF, and BDNF-NT3 were implanted into SCI rats. Basso, Beattie, and Bresnahan score, pathological changes, and spinal cord tissue and nerve fiber morphology were observed and assayed. GAP-43, GFAP, and caspase-3 expression was determined using immunohistochemistry and western blotting.Results: Smoother spinal cords, less scar tissue, and lower inflammatory activity were found in the SFCS, SFCS and ASCs, ASCs with NT3, BDNF, and BDNF-NT3 overexpression treatment than in the untreated SCI rat groups. Increasing formation of nerve fibers was observed in the above groups in order. GAP-43 expression significantly increased, while GFAP and caspase-3 expression significantly decreased. These results indicated obvious alleviation in pathological changes and BDNF-NT3 overexpression in ASCs combined with SFCS treatment in SCI rats.Conclusion: Thus, BDNF-NT3 overexpression from ASCs with SFCS had synergistic neuroprotective effects on SCI and may be a treatment option for SCI.

Patient-Derived Scaffolds of Colorectal Cancer Metastases as an Organotypic 3D Model of the Liver Metastatic Microenvironment

The liver is the most common site for colorectal cancer (CRC) metastasis and there is an urgent need for new tissue culture models to study colorectal cancer liver metastasis (CRLM) as current models do not mimic the biological, biochemical, and structural characteristics of the metastatic microenvironment. Decellularization provides a novel approach for the study of the cancer extracellular matrix (ECM) as decellularized scaffolds retain tissue-specific features and biological properties. In the present study, we created a 3D model of CRC and matched CRLM using patient-derived decellularized ECM scaffolds seeded with the HT-29 CRC cell line. Here, we show an increased HT-29 cell proliferation and migration capability when cultured in cancer-derived scaffolds compared to same-patient healthy colon and liver tissues. HT-29 cells cultured in CRLM scaffolds also displayed an indication of epithelial-mesenchymal transition (EMT), with a loss of E-cadherin and increased Vimentin expression. EMT was confirmed by gene expression profiling, with the most represented biological processes in CRLM-seeded scaffolds involving demethylation, deacetylation, a cellular response to stress metabolic processes, and a response to the oxygen level and starvation. HT-29 cells cultured in cancer-specific 3D microenvironments showed a reduced response to treatment with 5-fluorouracil and 5-fluorouracil combined with Irinotecan when used at a standard IC₅₀ (as determined in the 2D culture). Our 3D culture system with patient-derived tissue-specific decellularized ECM better recapitulates the metastatic microenvironment compared to conventional 2D culture conditions and represents a relevant approach for the study of CRLM progression and assessing the response to chemotherapy agents.

Mechanical property and biocompatibility of silk fibroin-collagen type II composite membrane

Osteoarthritis is caused by injuries and cartilage degeneration. Cartilage tissue engineering provides new ideas for the treatment of osteoarthritis. Herein, the different ratios composite membranes of silk fibroin/collagen type II were constructed (SF50-50:50, SF70-70:30, SF90-90:10). The surface properties of the composite membranes and chondrocyte morphology were observed by SEM (scanning electron microscopy). Physical functionality as well as stability of composite membranes was evaluated from tensile mechanical properties, the percentage of swelling and degradation. The tensile mechanical behavior of SF70 composite membranes was also predicted based on the constitutive model established in this study, and it is found that the experimental results and predictions were in good agreement. Biocompatibility was evaluated using chondrocytes (ADTC-5) culture. Cell proliferation was analyzed and the treatment of live/dead double staining was performed to assess the viability on chondrocytes. To sum up, SF70 showed the suitable morphology, physical stability, and biological functionality to promote proliferation of chondrocytes. This indicates that the mixing ratio of SF70 shows promise in the future as a scaffold material for cartilage repair.

Gadolinium-doped mesoporous calcium silicate/chitosan scaffolds enhanced bone regeneration ability

Chitosan (CTS) and mesoporous calcium silicate (MCS) have been developed for bone defect healing; however, their bone regeneration capacity still does not satisfy the patients with bone diseases. Gadolinium (Gd) is accumulated in human bones, and plays a beneficial role in regulating cell performance and bone regeneration. We firstly constructed Gd-doped MCS/CTS (Gd-MCS/CTS) scaffolds by a lyophilization technology. The interconnected arrangement of CTS films lead to forming macropores by using ice crystals as templates during the lyophilization procedure, and the Gd-MCS nanoparticles dispersed uniformly on the macropore walls. The biocompatible chemical components and hierarchical pores facilitated the attachment and spreading of rat bone marrow-derived mesenchymal stem cells (rBMSCs). Interestingly, the Gd dopants in the scaffolds effectively activated the Wnt/β-catenin signaling pathway, resulting in excellent cell proliferation and osteogenic differentiation capacities. The osteogenic-related genes such as alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2) and collagen type1 (COL-1) were remarkably up-regulated by Gd-MCS scaffolds as compared with MCS scaffolds, and their expression levels increased in a positive correlation with Gd doping amounts. Moreover, in vivo rat cranial defect tests further confirmed that Gd-MCS/CTS scaffolds significantly stimulated collagen deposition and new bone formation. The exciting finding suggested the beneficial effects of Gd³⁺ ions on osteogenic differentiation and new bone regeneration, and Gd-MCS/CTS scaffolds can be employed as a novel platform for bone defect healing.

Engineering the Future of Silk Materials through Advanced Manufacturing

Silk is a natural fiber renowned for its outstanding mechanical properties that have enabled the manufacturing of ultralight and ultrastrong textiles. Recent advances in silk processing and manufacturing have underpinned a re-interpretation of silk from textiles to technological materials. Here, it is argued that silk materials-optimized by selective pressure to work in the environment at the biotic-abiotic interface-can be harnessed by human micro- and nanomanufacturing technology to impart new functionalities and opportunities. A critical overview of recent progress in silk technology is presented with emphasis on high-tech applications enabled by recent innovations in multilevel modifications, multiscale manufacturing, and multimodal characterization of silk materials. These advances have enabled successful demonstrations of silk materials across several disciplines, including tissue engineering, drug delivery, implantable medical devices, and biodissolvable/degradable devices.

Silk fibroin/chitosan thin film promotes osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells

As a biodegradable polymer thin film, silk fibroin/chitosan composite film overcomes the defects of pure silk fibroin and chitosan films, respectively, and shows remarkable biocompatibility, appropriate hydrophilicity and mechanical properties. Silk fibroin/chitosan thin film can be used not only as metal implant coating for bone injury repair, but also as tissue engineering scaffold for skin, cornea, adipose, and other soft tissue injury repair. However, the biocompatibility of silk fibroin/chitosan thin film for mesenchymal stem cells, a kind of important seed cell of tissue engineering and regenerative medicine, is rarely reported. In this study, silk fibroin/chitosan film was prepared by solvent casting method, and the rat bone marrow-derived mesenchymal stem cells were cultured on the silk fibroin/chitosan thin film. Osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells were induced, respectively. The proliferation ability, osteogenic and adipogenic differentiation abilities of rat bone marrow-derived mesenchymal stem cells were systematically compared between silk fibroin/chitosan thin film and polystyrene tissue culture plates. The results showed that silk fibroin/chitosan thin film not only provided a comparable environment for the growth and proliferation of rat bone marrow-derived mesenchymal stem cells but also promoted their osteogenic and adipogenic differentiation. This work provided information of rat bone marrow-derived mesenchymal stem cells behavior on silk fibroin/chitosan thin film and extended the application of silk fibroin/chitosan thin film. Based on the results, we suggested that the silk fibroin/chitosan thin film could be a promising material for tissue engineering of bone, cartilage, adipose, and skin.