Preparation and characterization of aminated hyaluronic acid/oxidized hydroxyethyl cellulose hydrogel

How the Chemical Properties of Polysaccharides Make It Possible to Design Various Types of Organic-Inorganic Composites for Catalytic Applications

Recently, the use of plant-origin materials has become especially important due to the aggravation of environmental problems and the shortage and high cost of synthetic materials. One of the potential candidates among natural organic compounds is polysaccharides, characterized by a number of advantages over synthetic polymers. In recent years, natural polysaccharides have been used to design composite catalysts for various organic syntheses. This review is devoted to the current state of application of polysaccharides (chitosan, starch, pectin, cellulose, and hydroxyethylcellulose) and composites based on their catalysis. The article is divided into four main sections based on the type of polysaccharide: (1) chitosan-based nanocomposites; (2) pectin-based nanocomposites; (3) cellulose (hydroxyethylcellulose)-based nanocomposites; and (4) starch-based nanocomposites. Each section describes and summarizes recent studies on the preparation and application of polysaccharide-containing composites in various chemical transformations. It is shown that by modifying polysaccharides, polymers with special properties can be obtained, thus expanding the range of biocomposites for catalytic applications.

Electric-field-sensitive hydrogel based on pineapple peel oxidized hydroxyethyl cellulose/gelatin/Hericium erinaceus residues chitosan and its study in curcumin delivery

This study focused on synthesis of innovative hydrogels with electric field response from modified pineapple peel cellulose and hericium erinaceus chitosan and gelatin based on Schiff base reaction. A series of hydrogels were prepared by oxidized hydroxyethyl cellulose, gelatin and chitosan at different deacetylation degree via mild Schiff base reaction. Subsequently experiments towards the characterization of oxidized hydroxyethyl cellulose/gelatin/chitosan (OHGCS) hydrogel polymers were carried out by FTIR/XRD/XPS, swelling performances and electric response properties. The prepared hydrogels exhibited stable and reversible bending behaviors under repeated on-off switching of electric fields, affected by ionic strength, electric voltage and pH changes. The swelling ratio of OHGCS hydrogels was found reduced as deacetylation degree increasing and reached the maximum ratio ∼ 2250 % for OHGCS-1. In vitro drug releasing study showed the both curcumin loading capacity and release amount of Cur-OHGCS hydrogels arrived about 90 % during 6 h. Antioxidation assessments showed that the curcumin-loaded hydrogels had good antioxidation activities, in which, 10 mg Cur-OHGCS-1 hydrogel could reach to the maximum of about 90 % DPPH scavenging ratio. These results indicate the OHGCS hydrogels have potentials in sensor and drug delivery system.

The contemplation of amylose for the delivery of ulcerogenic nonsteroidal anti-inflammatory drugs

This manuscript proposes an innovative approach to mitigate the gastrointestinal adversities linked with nonsteroidal anti-inflammatory drugs (NSAIDs) by exploiting amylose as a novel drug delivery carrier. The intrinsic attributes of V-amylose, such as its structural uniqueness, biocompatibility and biodegradability, as well as its capacity to form inclusion complexes with diverse drug molecules, are meticulously explored. Through a comprehensive physicochemical analysis of V-amylose and ulcerogenic NSAIDs, the plausibility of amylose as a protective carrier for ulcerogenic NSAIDs to gastrointestinal regions is elucidated. This review further discusses the potential therapeutic advantages of amylose-based drug delivery systems in the management of gastric ulcers. By providing controlled release kinetics and enhanced bioavailability, these systems offer promising prospects for the development of more effective ulcer therapies.

Influence of chitosan and hydroxyethyl cellulose modifications towards the design of cross-linked double networks hydrogel for diabetic wound healing

The wound dressings' lack of antioxidant and antibacterial properties, and delayed wound healing limit their use in wound treatment and management. Recent advances in dressing materials are aimed at improving the limitations discussed above. Therefore, the aim of this study includes the preparation and characterization of oxidized hydroxyethyl cellulose (OHEC) and ferulic acid-grafted chitosan (CS-FA) hydrogel loaded with green synthesized selenium nanoparticles (Se NPs) (OHEC-CS-FA-Se NPs named as nanohydrogel) for diabetic wound healing. The structure and properties of the hydrogel was characterized by FTIR, FE-SEM, HR-TEM, EDAX, UV-Vis spectrophotometry, XRD, DLS, zeta potential and rheological studies. The findings of these experiments demonstrate that nanohydrogel possesses a variety of outstanding qualities, including an optimal gel time, good swelling characteristics, a fair water retention rate, a good degradation rate, and strong mechanical stability. Nanohydrogel has been shown to have a synergistic impact by significantly increasing antioxidant activity by scavenging ABTS and DPPH radicals. The nanohydrogel's strong biocompatibility was confirmed by cytocompatibility testing using L929 mouse fibroblast cells. In addition, the wound healing potential of nanohydrogel was tested on L929 cells by an in vitro scratch assay and the nanohydrogel showed a wound closure rate of 100 % after 12 h. In addition to this study, nanohydrogel has demonstrated significant antimicrobial properties against human and wound infection causing pathogens such as Bacillus subtilis, methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, and Pseudomonas aeruginosa. In the animal model, almost complete diabetic wound healing was achieved on day 14 after application of the nanohydrogel. The results obtained indicate that the multifunctional bioactive nature of OHEC-CS-FA-Se NPs showed exceptional antioxidant and antibacterial potential for the treatment of infected and chronic wounds.

Rapid self-healing carboxymethyl chitosan/hyaluronic acid hydrogels with injectable ability for drug delivery

In this study, the quaternized carboxymethyl chitosan (QCMCS), oxidized hyaluronic acid (OHA), 3,3'-dithiobis-(propionohydrazide) (DTP) were used as raw materials for the synthesis of hydrogels with excellent properties as carriers for drug release. The hydrogels were prepared by a simple "one-pot" method without external stimuli on the basis of interactions between formed dynamic covalent bonds (imine bonds, acylhydrazone bonds, disulfide bonds) and hydrogen bonds. The hydrogels had rapid self-healing properties, with a self-healing rate of 96 % after 30 min, as well as good pH responsiveness and excellent cytocompatibility (up to 98 % cell survival). The compressive stress of the hydrogels reached 423 kPa. Moreover, a representative drug (acetylsalicylic acid) demonstrated sustained release in the hydrogels (>72 h). The drug release behaviour was shown to be consistent with the Fick diffusion mechanism by kinetic modelling. Collectively, the findings demonstrate that the QCMCS + OHA + DTP injectable self-healing hydrogels are a potential material for the construction of pH-controlled drug delivery platforms.

pH-responsive multi-network composite cellulose-based hydrogels for stable delivery of oral IgY-Fab fragments

Yolk immunoglobulin (IgY) is perfect supplement to mammalian immunoglobulin G in passive immune protection but with poor delivery stability. This work succeeded in pH-responsive oral delivery of IgY-Fab fragments with cellulose based multi-network composite hydrogels. Data displayed that the hydrogel 2 showed superior mechanical properties and load performance (encapsulation efficiency of 99.25% and loading capacity of 45.11 mg/100 mg). The stability of the released Fab was confirmed by HPLC with Fab purity up to 79.65% at the end of digestion. The FTIR spectra revealed the potential interactions between Fab and the hydrogel matrix of the formation of hydrogen bonds or electrostatic interactions between the groups of -OH, -CH2, and -COO-. The excellent rehydration of the hydrogels wouldn't be impacted by low-temperature freeze drying. In sum, this work is of great significance to the development of Fab-themed health-care food, intensive processing of poultry eggs and the economic construction of related industries.

Promising cellulose-based functional gels for advanced biomedical applications: A review

Novel biomedical materials provide a new horizon for the diagnosis/treatment of diseases and tissue repair in medical engineering. As the most abundant biomass polymer on earth, cellulose is characterized by natural biocompatibility, good mechanical properties, and structure-performance designability. Owing to these outstanding features, cellulose as a biomacromolecule can be designed as functional biomaterials via hydrogen bonding (H-bonding) interaction or chemical modification for human tissue repair, implantable tissue organs, and controlling drug release. Moreover, cellulose can also be used to construct medical sensors for monitoring human physiological signals. In this study, the structural characteristics, functionalization approaches, and advanced biomedical applications of cellulose are reviewed. The current status and application prospects of cellulose and its functional materials for wound dressings, drug delivery, tissue engineering, and electronic skin (e-skin) are discussed. Finally, the key technologies and methods used for designing cellulosic biomaterials and broadening their application prospects in biomedical fields are highlighted.

Preparation and evaluation of hydroxyethyl cellulose-based functional polymer for highly efficient utilization of heavy oil under the harsh reservoir environments

Emulsification viscosity reduction and subsequent demulsification are effective strategies to improve the utilization rate of heavy oil. However, traditional surfactants are challenged by unsatisfactory salt tolerance, inadequate stability in emulsification, difficulty in demulsification and pollution problem of oily wastewater discharge. To realize the feasibility and environment-friendliness of heavy oil utilization in the harsh reservoir environments, we designed a functional polymer and conducted a comprehensive evaluation using heavy oil samples from Chenping oil well in Shengli Oilfield. It was synthesized by grafting two hydrophobic monomers, lauryl methacrylate (LMA) and N, N-Diethylaminomethyl methacrylate (DEAEMA), onto the hydrophilia hydroxyethyl cellulose (HEC) by free-radical polymerization. The viscosity reduction rate can reach 99.57 % even under the high salinity of 26,050 mg/L. The stable oil-in-water (O/W) emulsion can be maintained for >48 h, satisfying the actual requirements for heavy oil recovery. Moreover, the emulsion can be completely demulsified in a CO2 atmosphere within 30 min, suggesting its satisfactory demulsification performance. Our study achieved the one-step transformation of heavy oil emulsion between emulsification and demulsification, which provides a green bio-based material and an ingenious strategy for enhanced oil recovery and other chemical engineering applications including oil/water separation.

Protein/polysaccharide-based hydrogels loaded probiotic-mediated therapeutic systems: A review

The natural characteristics of protein/polysaccharide-based hydrogels, as a potential drug delivery platform, have attracted extensive attention. Probiotics have attracted renewed interest in drug research because of their beneficial effects on host health. The idea of using probiotics loaded on protein/polysaccharide-based hydrogels as potential drugs to treat different diseases has been put forward and shows great prospects. Based on this, in this review, we highlight the design strategy of hydrogels loaded probiotic-mediated therapy systems and review the potential diseases that have been proved to be treatable in the laboratory, including promoting wound healing and improving intestinal health and vaginal health, and discuss the challenges existing in the current design.

Self-strengthening and conductive cellulose composite hydrogel for high sensitivity strain sensor and flexible triboelectric nanogenerator

Triboelectric nanogenerators (TENGs) as promising energy harvesting devices have gained increasing attention. However, the fabrication of TENG simultaneously meets the requirements of green start feedstock, flexible, stretchable, and environmentally friendly remains challenging. Herein, the hydroxyethyl cellulose macromonomer (HECM) simultaneously bearing acrylate and hydroxyl groups was first synthesized and used as a crosslinker to prepare the chemically and physically dual-crosslinked cellulose composite hydrogel for an electrode material of stretchable TENG. Meanwhile, the in-situ polymerization of pyrrole endowed the hydrogel with satisfactory conductivity of 0.40 S/m. More impressively, the synergies of the cellulose rigid skeleton and the construction of the dual-crosslinking network significantly improved the mechanical toughness, and the hydrogel exhibited excellent self-strengthening through cyclic compression mechanical training, the self-strengthening efficiency reached 124.7 % after 10 compression cycles. Given these features, the hydrogel was used as wearable strain sensors with extremely high sensitivity (GF = 3.95) for real-time monitoring human motions. Additionally, the hydrogel showed practical applications in stretchable H-TENG for converting mechanical energy into electric energy to light LEDs and power a digital watch, and in self-powered wearable sensors to distinguish human motions and English letters. This work provided a promising strategy for fabricating sustainable, eco-friendly energy harvesting and self-powered electronic devices.

A dual physical crosslinking starch-based hydrogel exhibiting high strength, fatigue resistance, excellent biocompatibility, and biodegradability

Simultaneous realization of high strength, toughness, and fatigue resistance in natural starch-based hydrogel materials is challenging. A facile method of in situ self-assembly and a freeze-thaw cycle was proposed to construct double-network nanocomposite hydrogels of debranched corn starch/polyvinyl alcohol (Gels). Rheology, chemical structure, microstructure, and mechanical property of Gels were investigated. Notably, short linear starch chains were self-assembled into nanoparticles and subsequently into 3D microaggregates, which were tightly wrapped by starch and PVA network. Compared with corn starch single-network and starch/PVA double-network hydrogels, the Gels reached up to a higher compressive strength (ca. 1095.7 kPa), and then achieved to ∼20-30-fold improvement in compressive strength. Recovery efficiency exceeded 85% after 20 successive compression loading-unloading cycle tests. Furthermore, the Gels had good biocompatibility to L929 cells. Hence, the high-performance starch hydrogels are thought to serve as a biodegradable and biocompatible material to replace synthetic hydrogels, which can broaden their application fields.

An injectable hydrogel based on hyaluronic acid prepared by Schiff base for long-term controlled drug release

Drug-loaded injectable hydrogels have been studied widely in biomedical technology while the stable long-term controlled drug release and cytotoxicity are challenges. In this work, an injectable hydrogel with good swelling resistance was in situ synthetized using aminated hyaluronic acid (NHA) and aldehyde β-cyclodextrin (ACD) via Schiff-base reaction. The composition, morphology and mechanical property were characterized with FTIR, ¹³C NMR, SEM and rheology test, respectively. Voriconazole (VCZ) and Endophthalmitis was selected as a model drug and disease, respectively. The drug release, cytotoxicity and antifungal properties were detected in vitro. The results showed a long-term (> 60 days) drug release was realized, the NHA/ACD2/VCZ presented a zero-order release in the later stage. The cytotoxicity of NHA/ACD was detected by live/dead staining assay and Cell Counting Kit-8 (CCK-8). The survival rate of adult retina pigment epithelial cell line-19 (ARPE-19) was over 100 % after 3 d, it indicated a good cytocompatibility. The antifungal experiment presented samples had antifungal property. Biocompatibility in vivo proved NHA/ACD2 had no adverse effects on ocular tissues. Consequently, the injectable hydrogel based on hyaluronic acid prepared by Schiff base reaction provides a new option for long-term controlled drug release in the course of disease treatment from a material perspective.

Improved infectious burn wound healing by applying lyophilized particles containing probiotics and prebiotics

Lactiplantibacillus plantarum cells were encapsulated in a mixture of cationic and anionic polymers, with the final composition stabilized through freeze-drying. A D-optimal design was used to examine the effects of different polymer concentrations as well as adding prebiotics on the probiotic viability and swelling behavior of the formulations. Scanning electron micrographs revealed stacked particles capable of rapidly absorbing significant amounts of water. These images corresponded to initial swelling percentages of around 2000% for the optimal formulation. The optimized formula had a viability percentage of more than 82%, with the stability studies suggesting that the powders should be stored at refrigerated temperatures. The physical characteristics of the optimized formula were examined to ensure compatibility with its application. According to antimicrobial evaluations, the difference in pathogen inhibition between formulated and fresh probiotics was less than a logarithm. The final formula was tested in vivo and showed improved wound healing indicators. The optimized formula resulted in a higher rate of wound closure and infection clearance. Furthermore, the molecular studies for oxidative stress indicated that the formula could modify wound inflammatory responses. In histological investigations, the probiotic-loaded particles functioned exactly as efficaciously as silver sulfadiazine ointment did.

Coagulation/flocculation-flotation harvest of Microcystis aeruginosa by cationic hydroxyethyl cellulose and Agrobacterium mucopolysaccharides

Efficient biocoagulants/bioflocculants are desired for removal of Microcystis aeruginosa, the dominant harmful bloom-forming cyanobacterium. Herein, we reported cationic hydroxyethyl cellulose (CHEC) inactivated M. aeruginosa cells after forming coagulates and floating-flocculated them with aid of Agrobacterium mucopolysaccharides (AMP) and surfactant. CHEC exhibited cyanocidal activity at 20 mg/L, coagulating 85% of M. aeruginosa biomass within 9 h and decreasing 41% of chlorophyll a after 72 h. AMP acted as an adhesive flocculation aid that accelerated and strengthened the formation of flocs, approaching a maximum in 10 min. Flocs of M. aeruginosa were floated after foaming with cocoamidopropyl betaine (CAB), which facilitated the subsequent filter harvest. 82% of M. aeruginosa biomass was suspended on water surface after treated with the coagulation/flocculation-flotation (CFF) agents containing CHEC (25 mg/L), AMP (177 mg/L) and CAB (0.1 mg/L). All components in CFF agents at the applied concentrations did not inhibit acetylcholinesterase or Vibrio fischeri. Our findings provide new insights in developing bio-based materials for sustainable control of cyanobacterial blooms.

Sticking Together: Injectable Granular Hydrogels with Increased Functionality via Dynamic Covalent Inter-Particle Crosslinking

Granular hydrogels are an exciting class of microporous and injectable biomaterials that are being explored for many biomedical applications, including regenerative medicine, 3D printing, and drug delivery. Granular hydrogels often possess low mechanical moduli and lack structural integrity due to weak physical interactions between microgels. This has been addressed through covalent inter-particle crosslinking; however, covalent crosslinking often occurs through temporal enzymatic methods or photoinitiated reactions, which may limit injectability and material processing. To address this, a hyaluronic acid (HA) granular hydrogel is developed with dynamic covalent (hydrazone) inter-particle crosslinks. Extrusion fragmentation is used to fabricate microgels from photocrosslinkable norbornene-modified HA, additionally modified with either aldehyde or hydrazide groups. Aldehyde and hydrazide-containing microgels are mixed and jammed to form adhesive granular hydrogels. These granular hydrogels possess enhanced mechanical integrity and shape stability over controls due to the covalent inter-particle bonds, while maintaining injectability due to the dynamic hydrazone bonds. The adhesive granular hydrogels are applied to 3D printing, which allows the printing of structures that are stable without any further post-processing. Additionally, the authors demonstrate that adhesive granular hydrogels allow for cell invasion in vitro. Overall, this work demonstrates the use of dynamic covalent inter-particle crosslinking to enhance injectable granular hydrogels.

Bio-inspired, bio-degradable adenosine 5′-diphosphate-modified hyaluronic acid coordinated hydrophobic undecanal-modified chitosan for hemostasis and wound healing

Uncontrolled hemorrhage and wound infection are crucial causes of trauma-associated death in both the military and the clinic. Therefore, developing an efficient and rapid hemostatic method with biocompatibility, easy degradation, and wound healing is of great importance and desirability. Inspired by spontaneous blood cell plug formation in the hemostasis process, an adenosine 5′-diphosphate modified pro-coagulation hyaluronic acid (HA-ADP) coordinated with enhanced antibacterial activity of undecanal-modified chitosan (UCS) was fabricated through physical electrostatic cross-linking and freeze-drying. The as-prepared hydrogel sponges showed a porous structure suitable for blood cell adhesion. In particular, the hydrogel exhibited excellent antibacterial ability and promoted the adhesion of platelets and red blood cells, thus inducing a prominent pro-coagulation ability via platelet activation, which exhibits a shorter hemostasis time (58.94% of control) in vitro. Compared with commercially available CELOX and gelatin sponge (GS), HA-ADP/UCS accelerates hemostasis and reduces blood loss in both rat tail amputation and rat artery injury models. Furthermore, all the samples exhibited superior cytocompatibility and biodegradability. Due to these performances, HA-ADP/UCS promoted full-thickness skin defect healing significantly in vivo. All the properties of HA-ADP/UCS suggest that it has great potential for translation as a clinical application material for hemostatic and wound healing.

•

Using adenosine 5'-diphosphate, a physiologically platelet agonist, to modify hyaluronic acids to promote hemostatic effect.

•

Using undecanal to modify Chitosan fabricated with HA-ADP via electrostatic interactions and noncovalent crosslinking method.

•

The hydrogel sponges have excellent antibacterial properties related to the bacterial disruption abilities of UCS.

•

HA-ADP/UCS posed a great hemostatic performance, promoting wound healing by regulating inflammatory response in early stage.

Bio-fabricated nanocomposite hydrogel with ROS scavenging and local oxygenation accelerates diabetic wounds healing

Chronic wounds, especially diabetic wounds, have been suffering from abnormal long inflammatory periods due to their pathological microenvironment of high reactive oxygen species (ROS) level and lack of blood vessels....

Smart pH-Sensitive Hydrogel Based on the Pineapple Peel-Oxidized Hydroxyethyl Cellulose and the Hericium erinaceus Residue Carboxymethyl Chitosan for Use in Drug Delivery

Pineapple and hericium erinaceus (HE) produce a lot of residues in the process of food processing. These processed residues are good potential derivative precursors. In this investigation, a simple and non-toxic method was developed to prepare one new composite hydrogel by the Schiff base reaction between the aldehyde group of oxidized hydroxyethyl cellulose (OHEC) from processed pineapple peel residue and the amino group of carboxymethyl chitosan (CMCS) from processed HE residue. Subsequently, a series of experiments toward these new hydrogel polymers including structure characterization and performances were applied. The resultant hydrogel polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy and confirmed with thermogravimetry. It was observed that the modification of cellulose and chitin was adequate, and the synthesis of OHEC/CMCS hydrogel polymers was successful. The gelation time experiments indicated that the shortest gel time was 33 s at a mass ratio of 4:6 (OHEC-70:CMCS). The hydrogel showed good swelling properties. The maximum swelling rate reached 11.58 g/g, and the swelling rate decreased with the increase of the oxidation degree of OHEC. The drug delivery applications of the prepared hydrogel were evaluated with bovine serum albumin (BSA) as a model drug releasing in vitro. It was discovered that the BSA release from the hydrogel was pH sensitive under simulated gastrointestinal conditions. All of these attributes indicate that the novel prepared hydrogel polymers have the potential as good carriers for oral delivery of protein-type drugs.

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Chemically Modified Biopolymers for the Formation of Biomedical Hydrogels

Biopolymers are natural polymers sourced from plants and animals, which include a variety of polysaccharides and polypeptides. The inclusion of biopolymers into biomedical hydrogels is of great interest because of their inherent biochemical and biophysical properties, such as cellular adhesion, degradation, and viscoelasticity. The objective of this Review is to provide a detailed overview of the design and development of biopolymer hydrogels for biomedical applications, with an emphasis on biopolymer chemical modifications and cross-linking methods. First, the fundamentals of biopolymers and chemical conjugation methods to introduce cross-linking groups are described. Cross-linking methods to form biopolymer networks are then discussed in detail, including (i) covalent cross-linking (e.g., free radical chain polymerization, click cross-linking, cross-linking due to oxidation of phenolic groups), (ii) dynamic covalent cross-linking (e.g., Schiff base formation, disulfide formation, reversible Diels-Alder reactions), and (iii) physical cross-linking (e.g., guest-host interactions, hydrogen bonding, metal-ligand coordination, grafted biopolymers). Finally, recent advances in the use of chemically modified biopolymer hydrogels for the biofabrication of tissue scaffolds, therapeutic delivery, tissue adhesives and sealants, as well as the formation of interpenetrating network biopolymer hydrogels, are highlighted.

Enhanced Cu(II) adsorption using sodium trimetaphosphate-modified cellulose beads: equilibrium, kinetics, adsorption mechanisms, and reusability

The current study is focused on the simple synthesis of two novel biosorbent beads: BASB/STMP and CNFB/STMP, derived respectively from bleached almond shell (BAS) and cellulose nanofiber from almond shell (CNF) by means of chemical crosslinking with sodium trimetaphosphate (STMP). These biosorbents were thoroughly characterized in terms of structure (FTIR), texture (N₂ adsorption-desorption), thermal behavior (TGA/DTG), morphology (SEM), and surface properties (XPS). The adsorption kinetics of Cu(II) ions onto BASB/STMP and CNFB/STMP materials proved the chemisorption interaction between Cu(II) ions and the STMP functionalized beads. The BASB/STMP equilibrium data were successfully described by the Redlich-Peterson model and the CNFB/STMP data by the Sips model which disclosed maximum adsorption capacities of 141.44 mg g^-1 and 147.90 mg g^-1, respectively. Furthermore, the BASB/STMP bioadsorbent offers easy regeneration and better reusability with high efficiency (> 83%). This study sheds light on the preparation of low-cost adsorbents for wastewater treatment in order to improve the competitiveness and eco-friendliness of agrowaste-based processes.

Hyaluronan as a Prominent Biomolecule with Numerous Applications in Medicine

Hyaluronan (HA) is a natural glycosaminoglycan present in many tissues of all vertebrates. HA has various biological functions, which are dependent on its molar mass. High-molar-mass HA has anti-angiogenic, immunosuppressive and anti-inflammatory properties, while low-molar-mass HA has opposite effects. HA has also antioxidative properties, however on the other hand it can be readily degraded by reactive oxygen species. For many years it has been used in treatment of osteoarthritis, cosmetics and in ophthalmology. In the last years there has been a growing interest of HA to also be applied in other fields of medicine such as skin wound healing, tissue engineering, dentistry and gene delivery. In this review we summarize information on modes of HA administration, properties and effects of HA in various fields of medicine including recent progress in the investigation of HA.

Recent advances in composite hydrogels prepared solely from polysaccharides

The proliferating demand for sustainable, biodegradable, and biologically safe materials has triggered the development of polysaccharide-based hydrogels. The translation of research on single polysaccharide-based hydrogels into their desired clinical or industrial application is minimal. This is attributable to their lack of mechanical strength, inadequate stability, and constrained the possibility of their modulation to obtain the desired property. Polysaccharide-based composite hydrogels (PCHs) have proven their mantle to counteract this issue while expanding the horizons for their applications. PCHs can be fabricated by physical and/or chemical interlinking techniques, which entails the association of macromolecular chain linkages. The resulting composites can impart remarkably higher stability and elevate the suitability and efficiency of the system. Owing to these advantages, the research on PCHs has been gaining momentum. They are emerging as a lucrative alternative for the conventional molecules used for the fabrication of such materials. The review would initially focus on providing a detailed outlook for the various physical/chemical techniques involved in the preparation of PCHs. Subsequently, the characterization techniques used to understand the structural and chemical behavior of PCHs would be discussed. The article would also elaborate on the various fields of application and the possible areas for future research of PCHs.

Effect of hydroxyethyl cellulose soluble hemostatic gauze on hemostasis in facial contouring surgery

BACKGROUND

In facial contour surgery, due to the narrow field of vision in the oral approach and the abundant blood supply to the maxillofacial area, hemostasis is not easy. The purpose of this study was to evaluate the hemostatic effect of soluble hemostatic gauze.

METHODS

We organized a prospective randomized study of 282 patients receiving facial contouring surgery (4 types of procedures in total) during 2016.1.1 to 2018.12.30. For each type of procedure, patients were randomly divided into study group (received hemostatic gauze) and control group (received sterile gauze). Two groups were compared for each type of procedure regarding 5 major perioperative variables: intraoperative blood loss, operation time, 24-hour postoperative drainage volume, total postoperative drainage volume, and postoperative drainage time. Correlation between variables was analyzed.

RESULTS

Compared with control group, the study group had higher amount of intraoperative blood loss in mandibular angle ostectomy (MAO) (P < .01) and mandibular angle-body-chin curved ostectomy procedures (P < .05), less total postoperative drainage volume in MAO (P < .01) but not in malarplasty with MAO and partial masseter muscle resection along with MAO procedures. No significant difference was observed between respective study and control groups regarding operation time, 24-hour postoperative drainage volume, and postoperative drainage time in any of the 4 types of surgery. In all 4 types of procedures, a strongly positive correlation was observed between total drainage volume and 24-hour drainage volume in both the study and control groups (r: 0.88-0.97, P < .01).

CONCLUSION

The effect of hydroxyethyl cellulose soluble hemostatic gauze on hemostasis in facial contouring surgery is associated with the type of surgery, which can reduce the risk of postoperative bleeding in MAO. However, for surgery with relatively large amount of intraoperative and postoperative bleeding, the hemostatic gauze had a limited postoperative hemostasis efficacy, which needs further evaluation.

Development of oxidized hydroxyethyl cellulose-based hydrogel enabling unique mechanical, transparent and photochromic properties for contact lenses

With the development of smart devices, higher requirements are put forward for the stimuli-responsive materials. Stimuli-hydrogels as one kind of stimuli-responsive materials with hydrophilicity, demonstrate huge potential in developing intelligent devices for biomedical application. On this basis, we herein report that a sample method was devised to develop a novel composite hydrogel mainly based on oxidized hydroxyethyl cellulose and allyl co-polymer. Subsequently, a series of tests toward this oxidized hydroxyethyl cellulose-based hydrogel due to its structure and performance was applied. Here, the oxidized hydroxyethyl cellulose molecular chains were used as biomacromolecule templates to form Schiff base, borate and hydrogen bonds to obtain unique mechanical properties (fast recovery with almost no-hysteresis and remarkable compressive capacity), while a double bond functionalized spirooxazine (allyl spirooxazine derivative) was applied to endow photo- and pH sensitivity to the oxidized hydroxyethyl cellulose-based transparent hydrogel (T% = 93%) substrate. Furthermore, the oxidized hydroxyethyl cellulose-based hydrogel did exhibit good pH environment adaptability and noncytotoxicity in vitro test. Based on the advanced characteristics, the designed oxidized hydroxyethyl cellulose-based hydrogel has potential applications prospect in the development of safe, fashionable and pH- detectable contact lenses, thereby providing a new strategy for the development of smart, stylish contact lenses.

Characterization, antioxidant activity, and biocompatibility of selenium nanoparticle-loaded thermosensitive chitosan hydrogels

In this study, we recruited chitosan (CS) both for selenium nanoparticles (SeNPs) synthesis and for the development of a thermoresponsive nanocomposite hydrogel with the addition of glycerol phosphate (GP). Considering that SeNPs are toxic at high concentrations, five different ingredients of the nanocomposite hydrogel system with low concentrations of SeNPs (1.25-20 μg/mL) were prepared. The gelation conditions, structural characteristics, and mechanical properties of SeNPs-loaded thermosensitive CS/GP hydrogels were investigated. We also evaluated their antioxidizing activities and biocompatibility of the CS/GP/SeNPs hydrogels. Our study demonstrated that the incorporation of SeNPs in the hydrogel improved its mechanical properties, antioxidant activity, and degree of swelling. According to the properties of SeNPs and CS/GP thermosensitive hydrogels, the combination of these two technologies in an appropriate manner would be a promising antioxidant system for drug delivery and tissue engineering.

Preparation and anti-leakage properties of hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate) emulsion

A hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate)(HEC-g-P (BA-co-VAc)) emulsion was synthesized by free radical emulsion polymerization method from hydroxyethyl cellulose (HEC), butyl acrylate (BA) and vinyl acetate (VAc) in the presence of emulsifier sodium dodecyl benzene sulfonate (SDBS). The structure, thermal stability and morphology of the emulsion were characterized by Fourier-transform infrared (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and other analytical techniques. The results proved that BA and VAc monomers had grafted with HEC. Its thermal stability was also significantly improved compared to HEC. Moreover, the prepared emulsion was evaluated to study the performance of preventing water leakage in soil. Compared with the published anti-leakage materials prepared by directly doping hydroxyethyl cellulose, the emulsion interacted with attapulgite to form a dense consolidation layer, which had better anti-leakage performance and water retention. Therefore, the material was more favorable for popularization and application in arid and semi-arid areas.

In-situ crosslinked hydrogel based on amidated pectin/oxidized chitosan as potential wound dressing for skin repairing

Hydrogel can provide a favorable moisture environment for skin wound healing. In this study, a novel in-situ crosslinked injectable hydrogel was prepared using the water-soluble amidated pectin (AP) and oxidized chitosan (OC) through Schiff-base reaction without any chemical crosslinker. The influence of AP content on the properties of the hydrogel was systemically investigated. It showed that gelation time, pore structure, swelling capability and degradability of the hydrogel can be tuned by varying the content of amine and aldehyde groups from AP and OC. All the porous hydrogels with various AP contents (65%, 70%, and 80%) presented desirable gelation time, swelling property, high hemocompatibility and biocompatibility. Particularly, AP-OC-65 hydrogel presented superior swelling capability and better hemo- and bio-compatibility, owing to more residual amine sites in the hydrogel. Therefore, the injectable AP-OC-65 hydrogel has a greater potential for application to wound dressing or skin substitute.

An injectable hydrogel with pH-sensitive and self-healing properties based on 4armPEGDA and N-carboxyethyl chitosan for local treatment of hepatocellular carcinoma

Injectable hydrogels with pH-sensitive and self-healing properties have great application potential in the field of anti-cancer drug carriers. In this work, an injectable hydrogel is prepared using 4armPEG-benzaldehyde (4armPEGDA) and N-carboxyethyl chitosan (CEC) as a new drug carrier. The gelation time, equilibrium swelling rate, degradation time, and dynamic modulus of the injectable hydrogels can be adjusted by merely changing the concentration of 4armPEGDA. The volume of the hydrogel shrinks at pH 5.6 and expands at pH 7.4, which helps to control the release of anti-cancer drug. At pH 5.6, the hydrogels show a fast and substantial Dox release effect, which is five times higher than that at pH 7.4. In vitro cumulative drug release of all the hydrogels reached equilibrium on about the fourth day, and the hydrogel is completely degraded within five days, which contributes to the Dox-loaded hydrogel to further release the remaining Dox. Moreover, the Dox-loaded hydrogel shows a strong inhibitory effect on the growth of human hepatocellular carcinoma cells (HepG2). Finally, the anti-tumor model experiment in vivo demonstrated that the Dox-loaded hydrogel can significantly inhibit tumor growth within five days. Therefore, such injectable hydrogels are excellent carriers for the potential treatment of hepatocellular carcinoma.

Hyaluronic acid-Based wound dressings: A review

Hyaluronic acid (HA), a non-sulfated glycosaminoglycan (GAG), is a major component of skin extracellular matrix (ECM) and it is involved in the inflammatory response, angiogenesis, and tissue regeneration process. Due to the intrinsic properties of HA (such as biocompatibility, biodegradability and hydrophilic character), it has been used to produce different wound dressings, namely sponges, films, hydrogels, and electrospun membranes. Herein, an overview of the different HA-based wound dressings that have been produced so far is provided as well as the future directions regarding the strategies aimed to improve the mechanical stability of HA-based wound dressings, along with the incorporation of biomolecules intended to ameliorate their biological performance during the healing process.

Glycosaminoglycan-Inspired Biomaterials for the Development of Bioactive Hydrogel Networks

Glycosaminoglycans (GAG) are long, linear polysaccharides that display a wide range of relevant biological roles. Particularly, in the extracellular matrix (ECM) GAG specifically interact with other biological molecules, such as growth factors, protecting them from proteolysis or inhibiting factors. Additionally, ECM GAG are partially responsible for the mechanical stability of tissues due to their capacity to retain high amounts of water, enabling hydration of the ECM and rendering it resistant to compressive forces. In this review, the use of GAG for developing hydrogel networks with improved biological activity and/or mechanical properties is discussed. Greater focus is given to strategies involving the production of hydrogels that are composed of GAG alone or in combination with other materials. Additionally, approaches used to introduce GAG-inspired features in biomaterials of different sources will also be presented.

Oxidized chitosan modified electrospun scaffolds for controllable release of acyclovir

Developing a novel scaffold carrier with a sustained and controllable release profile of drug is essential to promote the effective transdermal delivery for acyclovir (ACY). In this work, electrospun polyacrylonitrile nanofibers (PAN NFs) was chemically modified with oxidized chitosan (OC). The modified fibrous scaffold was further loaded with the ACY for drug released investigation. FT-IR and NMR results revealed that the conversion of the functional group for each step has successfully occurred on the surface of the fibers. Through the in-vitro drug release and kinetic study, it demonstrated that ACY could be sustainably and controlled released from the OC modified scaffold following the Korsmeyer-Peppas model with a Fickian diffusion mechanism. The human adipose-derived stem cells and the blood combability evaluation confirmed the obtained scaffold possessed excellent cell biocompatibility and hemocompatibility. It could be concluded that the resultant OC modified scaffold based on electrospun PAN NFs opened a new potential option for the topical/transdermal drug delivery of ACY.

Dual-enzymatically crosslinked and injectable hyaluronic acid hydrogels for potential application in tissue engineering

Recently, in situ formed injectable hydrogels have shown great potential in biomedical applications as therapeutic implants or carriers in tissue repair and regeneration. They can seal or fill the damaged tissue to function as cell/drug delivery vehicle perfectly through a minimally invasive surgical procedure. In this study, hyaluronic acid (HA) is functionalized with tyramine to produce an injectable hydrogel dual-enzymatically crosslinked by horseradish peroxidase (HRP) and galactose oxidase (GalOX). This new tyramine-modified HA (HT) hydrogel exhibited good injectability, favorable cytocompatibility to mice bone marrow mesenchymal stem cells (BMSCs), and low inflammatory response verified by cytotoxicity assay in vitro and an in situ subcutaneous injection study in vivo. In addition, the gelation time, swelling behavior, and degradation rate of the HT hydrogel could be adjusted through varying the concentrations of HT and GalOX in a certain range. These encouraging results suggest that such biocompatible HT hydrogels might have potential application in three-dimensional stem cell culture and tissue engineering.

A new hyaluronic acid hydrogel dual-enzymatically cross-linked by HRP and GalOX and application for three-dimensional stem cell culture and tissue engineering.

The electrostimulation and scar inhibition effect of chitosan/oxidized hydroxyethyl cellulose/reduced graphene oxide/asiaticoside liposome based hydrogel on peripheral nerve regeneration in vitro

The application of hollow nerve conduits in the repair of peripheral nerve defects is effected by inferior recovery, and nerve extension is hampered by the scar tissue generated during the repair process. In this study, the filler in hollow nerve conduit, chitosan/oxidized hydroxyethyl cellulose (CS/OHEC) hydrogel loaded asiaticoside liposome and the conductive reduced graphene oxide (rGO) were developed and used to reform the microenvironment for peripheral nerve regeneration. The physiochemical properties of CS/OHEC/rGO/asiaticoside liposome hydrogel were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and compressive modulus, porosity, swelling ratio, degradation and conductivity. In addition, the asiaticoside release profiles in vitro were investigated. The hydrogel had a continuous porous network structure with pore size distribution in the range of 50-250 μm. The majority of the hydrogels had porosities above 70%, and a compressive modulus of 0.45 MPa. The weight loss rate of hydrogel reached 76.14 ± 4.45% within 8 weeks. The conductivity of the hydrogel was 5.27 ± 0.42 × 10^-4 S/cm. The hydrogel was non-toxic and suitable for adhesion and proliferation of nerve cells in vitro. In addition, the application of electrical stimulation after the addition of rGO can promote the differentiation and proliferation of nerve cells, accelerating nerve regeneration. The asiaticoside released from the hydrogel had a significant inhibitory effect on the growth and collagen secretion of fibroblasts, eliminating scars for regenerative nerves, which can promote the function recovery of defected peripheral nerve. Together, these positive results indicate that the hydrogel would be a promising candidate for peripheral nerve regeneration.

Photocatalytic antibacterial agent incorporated double-network hydrogel for wound healing

A novel antibacterial hydrogel was prepared through the addition of IT to a chitin (CT) and polyvinyl alcohol (PVA) hydrogel, creating a promising material for wound dressings. The addition of nano particles IT endowed the anti-bacterial activity of hydrogel as well as had a positive impact on the mechanical properties of the hydrogels. The structure of the prepared hydrogel dressing was characterized by FTIR, XPS, XRD, SEM and TEM. The composite hydrogel exhibited excellent anti-bacterial activity under the visible light. Cytotoxicity tests (L929 fibroblast cells) showed all samples achieving up to 80% cell viability. Furthermore, compared with conventional dressings, wound healing test revealed that CT/PVA/IT hydrogel could accelerated wound healing in vivo, wound closure rates reached 95.5% after 10 days. This study suggests that the novel hydrogel has considerable potential for applications in wound dressings.

Nanocrystalline cellulose-hyaluronic acid composite enriched with GM-CSF loaded chitosan nanoparticles for enhanced wound healing

In recent years, applications of biopolymers such as hyaluronic acid (HA) for wound dressing have attracted more attention. However, the poor mechanical properties of HA-based wound dressings limit their clinical applications. Incorporation of reinforcing agents such as nanocrystalline cellulose (CNC) in HA-based wound dressings can improve their mechanical properties. In addition, controlled delivery of growth factors to the wound site using nanoparticles can significantly improve the healing process. In this study, we focus on development and characterization of a novel CNC reinforced HA-based composite containing chitosan nanoparticles loaded with GM-CSF (CNC-HA/GM-CSF-Chi-NPs composite) as an effective wound dressing. CNC-HA/GM-CSF-Chi-NPs composite showed some physicochemical characteristics such as appropriate mechanical properties, high swelling capacity (swelling ratio: 2622.1% ± 35.2%) and controlled release of GM-CSF up to 48 h which make it an excellent candidate for wound dressing. In vivo investigation showed that, after 13 d, the wounds covered with CNC-HA/GM-CSF-Chi-NPs composite could reach to nearly full wound closure and complete re-epithelialization compared to the normal saline treated wounds which exhibited nearly 70% of wound size reduction. Furthermore, the CNC-HA/GM-CSF-Chi-NPs composite treated wounds exhibited significantly lower inflammatory reaction, enhanced re-epithelialization and improved granulation tissue formation compared with CNC-HA/Chi-NPs composite treated wound; it might be due to positive effects of GM-CSF on the wound healing process. Our results suggest that CNC-HA/GM-CSF-Chi-NPs composite can be potentially applied in clinical practice for wound treatment.