Sucrose-based biosynthetic process for chain-length-defined α-glucan and functional sweetener by Bifidobacterium amylosucrase

Efficient and novel biosynthesis of myricetin α-triglucoside with improved solubility using amylosucrase from Deinococcus deserti

Although myricetin (3,3',4',5,5',7-hexahydroxyflavone, MYR) has a high antioxidant capacity and health functions, its use as a functional food material is limited owing to its low stability and water solubility. Amylosucrase (ASase) is capable of biosynthesizing flavonol α-glycoside using flavonols as acceptor molecules and sucrose as a donor molecule. Here, ASase from Deinococcus deserti (DdAS) efficiently biosynthesizes a novel MYR α-triglucoside (MYRαG3) using MYR as the acceptor molecule. Comparative homology analysis and computational simulation revealed that DdAS has a different active pocket for the transglycosylation reaction. DdAS produced MYRαG3 with a conversion efficiency of 67.4 % using 10 mM MYR and 50 mM sucrose as acceptor and donor molecules, respectively. The structure of MYRαG3 was identified as MYR 4'-O-4″,6″-tri-O-α-D-glucopyranoside using NMR and LC-MS. In silico analysis confirmed that DdAS has a distinct active pocket compared to other ASases. In addition, molecular docking simulations predicted the synthetic sequence of MYRαG3. Furthermore, MYRαG3 showed a similar DPPH radical scavenging activity of 49 %, comparable to MYR, but with significantly higher water solubility, which increased from 0.03 μg/mL to 511.5 mg/mL. In conclusion, this study demonstrated the efficient biosynthesis of a novel MYRαG3 using DdAS and highlighted the potential of MYRαG3 as a functional material.

Enzymatic Synthesis of α-Glucan Microparticles Using Amylosucrases from Bifidobacterium Species and Its Physicochemical Properties

α-Glucan microparticles (GMPs) have significant potential as high-value biomaterials in various industries. This study proposes a bottom-up approach for producing GMPs using four amylosucrases from Bifidobacterium sp. (BASs). The physicochemical characteristics of these GMPs were analyzed, and the results showed that the properties of the GMPs varied depending on the type of enzymes used in their synthesis. As common properties, all GMPs exhibited typical B-type crystal patterns and poor colloidal dispersion stability. Interestingly, differences in the physicochemical properties of GMPs were generated depending on the synthesis rate of linear α-glucan by the enzymes and the degree of polymerization (DP) distribution. Consequently, we found differences in the properties of GMPs depending on the DP distribution of linear glucans prepared with four BASs. Furthermore, we suggest that precise control of the type and characteristics of the enzymes provides the possibility of producing GMPs with tailored physicochemical properties for various industrial applications.

Cost-effective and controllable synthesis of isomalto/malto-polysaccharides from β-cyclodextrin by combined action of cyclodextrinase and 4,6-α-glucanotransferase GtfB

Isomalto/malto-polysaccharides (IMMPs) derived from malto-oligosaccharides such as maltoheptaose (G7) are elongated non-branched gluco-oligosaccharides produced by 4,6-α-glucanotransferase (GtfB). However, G7 is expensive and cumbersome to produce commercially. In this study, a cost-effective enzymatic process for IMMPs synthesis is developed that utilizes the combined action of cyclodextrinase from Palaeococcus pacificus (PpCD) and GtfB-ΔN from Limosilactobacillus reuteri 121 to convert β-cyclodextrin into IMMPs with a maximum yield (16.19 %, w/w). The purified IMMPs synthesized by simultaneous or sequential treatments, designated as IMMP-Sim and IMMP-Seq, possess relatively high contents of α-(1 → 6) glucosidic linkages. By controlling the release of G7 and smaller malto-oligosaccharides by PpCD, IMMP-Seq was obtained of DP varying from 12.9 to 29.5. Enzymatic fingerprinting revealed different linkage-type distribution of α-(1 → 6) linked segments with α-(1 → 4) segments embedded at the reducing end and middle part. The proportion of α-(1 → 6) segments containing the non-reducing end was 56.76 % for IMMP-Sim but 28.98 % for IMMP-Seq. Addition of G3 or G4 as specific acceptors resulted in IMMPs exhibiting low polydispersity. This procedure can be applied as a novel bioprocess that does not require costy high-purity malto-oligosaccharides and with control of the average DP of IMMPs by adjusting the substrate composition.

Production of branched glucan polymer by a novel thermostable branching enzyme of Bifidobacterium thermophilum via one-pot biosynthesis containing a dual enzyme system

Glycogen-like particles (GLPs) are applied in food, pharmaceutical, and cosmetics. The large-scale production of GLPs is limited by their complicated multi-step enzymic processes. In this study, GLPs were produced in a one-pot dual-enzyme system using Bifidobacterium thermophilum branching enzyme (BtBE) and Neisseria polysaccharea amylosucrase (NpAS). BtBE showed excellent thermal stability (half-life of 1732.9 h at 50 °C). Substrate concentration was the most influential factor during GLPs production in this system: GLPs yield and [sucrose]_ini decreased from 42.4 % to 17.4 % and 0.3 to 1.0 M, respectively. Molecular weight and apparent density of GLPs decreased significantly with increasing [sucrose]_ini. Regardless of the [sucrose]_ini, the DP 6 of branch chain length was predominantly occupied. GLP digestibility increased with increasing [sucrose]_ini, indicating that the degree of GLP hydrolysis may be negatively related to its apparent density. This one-pot biosynthesis of GLPs using a dual-enzyme system could be useful for the development of industrial processes.

Macromolecular α-glucans with α-1,3/α-1,4 branching structures produced using dual glycosyltransferases: Elucidation of physicochemical and slowly digestible properties

Amylosucrase from Neisseria polysaccharea (NpAS) produces the linear amylose-like α-glucans by the elongation property from sucrose, and 4,3-α-glucanotransferase from Lactobacillus fermentum NCC 2970 (4,3-αGT) newly synthesizes the α-1,3 linkages after cleaving the α-1,4 linkages by the glycosyltransferring property. This study focused on the synthesis of high molecular α-1,3/α-1,4-linked glucans by combining NpAS and 4,3-αGT and analyzed their structural and digestive properties. The enzymatically synthesized α-glucans have a molecular weight of >1.6 × 10⁷ g mol^-1, and the α-4,3 branching ratios on the structures increased as the amount of 4,3-αGT increased. The synthesized α-glucans were hydrolyzed to linear maltooligosaccharides and α-4,3 branched α-limit dextrins (α-LDx) by human pancreatic α-amylase, and the amounts of produced α-LDx were increased depending on the ratio of synthesized α-1,3 linkages. In addition, approximately 80 % of the synthesized products were partially hydrolyzed by mammalian α-glucosidases, and the glucose generation rates decelerated as the amounts of α-1,3 linkages increased. In conclusion, new types of α-glucans with α-1,4 and α-1,3 linkages were successfully synthesized by a dual enzyme reaction. These can be utilized as slowly digestible and prebiotic ingredients in the gastrointestinal tract due to their novel linkage patterns and high molecular weights.

Identification and characterization of a novel high-activity amylosucrase from Salinispirillum sp. LH10-3-1

In this study, a novel high-activity amylosucrase from Salinispirillum sp. LH10-3-1 (SaAS) was identified and characterized. The recombinant enzyme was determined as a monomer with a molecular mass of 75 kDa. SaAS protein exhibited the maximum total and polymerization activities at pH 9.0 and maximum hydrolysis activity at pH 8.0. The optimum temperature for total, polymerization, and hydrolysis activities were 40, 40, and 45 °C, respectively. Under the optimal pH and temperature, SaAS had a specific activity of 108.2 U/mg. SaAS also showed excellent salt tolerance and could retain 77.4% of its original total activity at 4.0 M NaCl. The addition of Mg²⁺, Ba²⁺, and Ca²⁺ enhanced the total activity of SaAS. When the conversion of 0.1 M and 1.0 M sucrose was catalyzed at pH 9.0 and 40 °C for 24 h, the ratios of hydrolysis, polymerization, and isomerization reactions were 11.9:77.4:10.7 and 15.3:53.5:31.2, respectively. The α-arbutin yield of 60.3% was achieved from 20 mM sucrose and 5 mM hydroquinone catalyzed by SaAS. KEY POINTS: • A novel amylosucrase from Salinispirillum sp. LH10-3-1 (SaAS) was characterized. • SaAS has the highest specific enzyme activity among all known amylosucrase. • SaAS has hydrolysis, polymerization, isomerization, and glucosyltransferase activities.

A unique biochemical reaction pathway towards trehalulose synthesis by an amylosucrase isolated from Deinococcus deserti

The aim of this study was to establish an efficient bioprocess for the synthesis of trehalulose as a novel sweetener. This disaccharide has 70% of the sweetness of sucrose and bioactive properties such as anti-cariogenicity and anti-oxidizing activity. In this study, amylosucrase from the Deinococcus deserti (DdAS) gene was expressed and purified. When DdAS was reacted with 2M sucrose at 35 °C for 120h, the yield ratio of trehalulose to turanose was approximately 2:1. The trehalulose yield increased when extrinsic fructose was added. Under optimum conditions for trehalulose synthesis, the yield reached 36% (246g/L, sucrose basis) starting with 2M sucrose + 0.75M fructose and showed the highest trehalulose productivity (1.94g/L/h). As a result, a novel amylosucrase that synthesized trehalulose as the major product was developed, in contrast to other studied amylosucrase-type enzymes. DdAS could be utilized industrially in a bioprocess for producing trehalulose as a functional sucrose alternative.

Analysis of the Structure and Antigenicity in Ovalbumin Modified with Six Disaccharides Through Liquid Chromatography-High-Resolution Mass Spectrometry

Melibiose, cellobiose, maltose, lactose, turanose, and isomaltulose were selected to be glycated with OVA. The number of free amino groups of OVA modified with different disaccharides decreased, and the secondary and tertiary structures of the modified OVA also changed greatly. Moreover, the glycation sites detected by HPLC-HCD-MS/MS were all on the sensitized epitopes of OVA, which reduced the binding ability of IgG and IgE of glycated OVA. In addition, the glycation sites with the highest DSP in different samples were located in the irregular coil region of OVA. Among the six disaccharides, the glycation reaction between melibiose and OVA was the most obvious. Through the analysis of disaccharide configuration, it was found that the glycation efficiency of the reducing disaccharide linked by a 1 → 6 glycoside bond was higher than that by a 1 → 4 glycoside bond, and reducing sugar with β type was better than that with α type. These findings would provide a theoretical reference for the use of different sugars in food production.

Site-Directed Mutagenic Engineering of a Bifidobacterium Amylosucrase toward Greater Efficiency of Turanose Synthesis

The aim of this study was to establish one of the most efficient biocatalytic processes for turanose production by applying a robust Bifidobacterium thermophilum (BtAS) mutant developed through site-directed mutagenesis. A gene encoding the amylosucrase of B. thermophilum (BtAS) was cloned and used as a mutagenesis template. Among the BtAS variants generated by the site-directed point mutation, four different single-point mutants (P200R, V202I, Y265F, and Y414F) were selected to create double-point mutants, among which BtAS_Y414F/P200R displayed the greatest turanose productivity without losing the thermostability of native BtAS. The turanose yield of BtAS_Y414F/P200R reached 89.3% at 50 °C after 6 h with 1.0 M sucrose + 1.0 M fructose. BtAS_Y414F/P200R produced significantly more turanose than BtAS-wild type (WT) by 2 times and completed the reaction faster by another 2 times. Thus, turanose productivity (82.0 g/(L h)) by BtAS_Y414F/P200R was highly improved from 28.1 g/(L h) of BtAS-WT with 2.0 M sucrose + 0.75 M fructose.

Differentiated structure of synthetic glycogen-like particle by the combined action of glycogen branching enzymes and amylosucrase

Glycogen-like particles (GLPs) were built up from sucrose by applying de novo one-pot enzymatic process of amylosucrase (ASase; 6 U·mL^-1) and glycogen branching enzymes (GBEs; 0.001 and 0.005 U·mL^-1). Due to different chain-length transferring patterns of GBEs, structurally differentiated GLPs were synthesized. Yields of GLPs synthesized at pH 7.0 and 30 °C were improved by increasing the GBE/ASase ratio. Branching degrees of GLPs obviously was increased along with the ratio of GBEs, of which result was directly supported by shortened branch-chain length with greater GBE activity. Long branch chains seemed to play as efficient acceptor molecules to bind newly transferred branch chains especially at lower ratio of GBE/ASase, resulting in greater molecular weight and size of GLP with higher proportion of them. Molecular weight, size, and density of GLPs were ranged from 7.37 × 10⁵ to 1.94 × 10⁸ g·mol^-1, from 23.70 to 52.65 nm, and from 7.99 to 374.32 g·mol^-1·nm^-3, respectively. By increasing GBE/ASase ratio, more compact GLP architecture was fabricated due to increased weight and reduced size with exception of a unique GBE. GLPs were efficiently synthesized by two different glycosyltransferases, and their chemical structures were controllable by source and ratio of GBEs due to their different branch-chain transferring specificity.

Potential applications of recombinant bifidobacterial proteins in the food industry, biomedicine, process innovation and glycobiology

Bifidobacterial proteins have been widely studied to elucidate the metabolic mechanisms of diet adaptation and survival of Bifidobacteria, among others. The use of heterologous expression systems to obtain proteins in sufficient quantities to be characterized has been essential in these studies. L. lactis and the same Bifidobacterium as expression systems highlight ways to corroborate some of the functions attributed to these proteins. The most studied proteins are enzymes related to carbohydrate metabolism, particularly glycosidases, due to their potential application in the synthesis of neoglycoconjugates, prebiotic neooligosaccharides, and active metabolites as well as their high specificity and efficiency in processing glycoconjugates. In this review, we classified the recombinant bifidobacterial proteins reported to date whose characterization has demonstrated their usefulness or their ability to produce a product of commercial interest for the food industry, biomedicine, process innovation and glycobiology. Future directions for their study are also discussed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-021-00957-1.

Biotransformation of hydroquinone into α-arbutin by transglucosylation activity of a metagenomic amylosucrase

Arbutin is a naturally occurring glycosylated product of hydroquinone. With the ability to interrupt melanin biosynthesis in epidermal cells, it is a promising cosmetic ingredient. In this study, a novel amylosucrase, As_met, identified from a thermal spring metagenome, has been characterized for arbutin biosynthesis. As_met was able to catalyze transglucosylation of hydroquinone to arbutin, taking sucrose as glycosyl donor, in the temperature range of 20 °C to 40 °C and pH 5.0 to 6.0, with the relative activity of 80% or more. The presence of chloride salts of Li, K, and Na at 1 mM concentration did not exhibit any notable effect on the enzyme's activity, unlike Cu, Ni, and Mn, which were observed to be detrimental. The hydroquinone (20 mM) to sucrose ratio of 1:1 to 1:10 was appropriate for the catalytic biosynthesis of arbutin. The maximum hydroquinone to arbutin conversion of 70% was obtained in 24 h of As_met led catalysis, at 30 °C and pH 6.0. Arbutin production was also demonstrated using low-cost feedstock, table sugar, muscovado, and sweet sorghum stalk extract, as a replacement for sucrose. Whole-cell catalysis of hydroquinone to arbutin transglucosylation was also established.

Biosynthesis of glyceride glycoside (nonionic surfactant) by amylosucrase, a powerful glycosyltransferase

Amylosucrase (ASase, E.C. 2.4.1.4) is a powerful transglycosylation enzyme that can transfer glucose from sucrose to the hydroxyl (-OH) group of various compounds. In this study, recombinant ASases from Deinococcus geothermalis (DgAS) and Bifidobacterium thermophilum (BtAS) were used to synthesize biosurfactants based on the computational analysis of predicted docking simulations. Successful predictions of the binding affinities, conformations, and three-dimensional structures of three surfactants were computed from receptor-ligand binding modes. DgAS and BtAS were effective in the synthesis of biosurfactants from glyceryl caprylate, glyceryl caprate, and polyglyceryl-2 caprate. The results of the transglycosylation reaction were consistent for both ASases, with glyceryl caprylate acceptor showing the highest concentration, as confirmed by thin layer chromatography. Furthermore, the transglycosylation reactions of DgAS were more effective than those of BtAS. Among the three substrates, glyceryl caprylate glycoside and glyceryl caprate glycoside were successfully purified by liquid chromatography-mass spectrometry (LC-MS) with the corresponding molecular weights.

Comparative study on four amylosucrases from Bifidobacterium species

Amylosucrase (ASase) is α-glucan-producing enzyme. Four putative ASase genes (bdas, blas, bpas, and btas) were cloned from Bifidobacterium sp. and expressed in Escherichia coli. All ASases from Bifidobacterium sp. (BAS) displayed typical ASase properties with slightly different characteristics. Among the BASs studied, BdAS and BpAS showed maximal enzyme activities at 35 and 30 °C, respectively, whereas BlAS and BtAS were maximally active at higher temperatures, i.e., 45 and 50 °C, respectively. BpAS exhibited optimum pH under slightly basic conditions (pH 8.0), while BdAS, BlAS, and BtAS preferred weakly acidic conditions (pH 5.0-6.0). All BASs showed higher isomerization activities. Particularly, BlAS produced more trehalulose than turanose. Although polymerization was the highest for BtAS, BtAS synthesized α-1, 4-glucans with a lower degree of polymerization than that of the other BASs. The versatile properties of the BASs described could contribute to the efficient production of highly valuable biomaterials for the agriculture, food, and pharmaceutical industries.

Versatile biotechnological applications of amylosucrase, a novel glucosyltransferase

Amylosucrase (AS; EC 2.4.1.4) is an enzyme that has great potential in the biotechnology and food industries, due to its multifunctional enzyme activities. It can synthesize α-1,4-glucans, like amylose, from sucrose as a sole substrate, but importantly, it can also utilize various other molecules as acceptors. In addition, AS produces sucrose isomers such as turanose and trehalulose. It also efficiently synthesizes modified starch with increased ratios of slow digestive starch and resistant starch, and glucosylated functional compounds with increased water solubility and stability. Furthermore, AS produces turnaose more efficiently than other carbohydrate-active enzymes. Amylose synthesized by AS forms microparticles and these can be utilized as biocompatible materials with various bio-applications, including drug delivery, chromatography, and bioanalytical sciences. This review not only compares the gene and enzyme characteristics of microbial AS, studied to date, but also focuses on the applications of AS in the biotechnology and food industries.

Sucrose isomers as alternative sweeteners: properties, production, and applications

In the daily diet, sweeteners play an indispensable role. Among them, sucrose, a widely occurring disaccharide in nature, is a commonly used sweetener. However, the intake of sucrose can cause a rapid increase in blood glucose, which leads to a number of health problems. Therefore, there is an urgent need for possible alternatives to sucrose. Currently, four naturally occurring sucrose isomers, trehalulose, turanose, leucrose, and isomaltulose are considered to be possible alternatives to sucrose due to their suitable sweetness, potential physiological benefits, and feasible production processes. This review covers the properties of these alternative sweeteners, including their structure, sweetness, hydrolysis rate, toxicology, and cariogenicity, and exhibits their potential applications in chronic diseases management, anti-inflammatory supplement, prebiotic dietary supplement, and stabilizing agent. The biosynthesis of these sucrose isomers using carbohydrate-active enzymes and their industrial production processes are also systematically summarized.

Thermostable Amylosucrase from Calidithermus timidus DSM 17022: Insight into Its Characteristics and Tetrameric Conformation

Amylosucrase (EC 2.4.1.4, ASase), a typical carbohydrate-active enzyme, can catalyze 5 types of reactions and recognize more than 50 types of glycosyl acceptors. However, most ASases are unstable even at 50 °C, which limits their practical industrial applications. In this study, an extremely thermostable ASase was discovered from Calidithermus timidus DSM 17022 (CT-ASase) with an optimal activity temperature of 55 °C, half-life of 1.09 h at 70 °C, and melting temperature of 74.47 °C. The recombinant CT-ASase was characterized as the first tetrameric ASase, and a structure-based truncation mutation was conducted to confirm the effect of tetrameric conformation on its thermostability. In addition, α-1,4-glucan was found to be the predominant product of CT-ASase at pH 6.0-8.0 and 30-60 °C.

Characterization of a novel amylosucrase gene from the metagenome of a thermal aquatic habitat, and its use in turanose production from sucrose biomass

Turanose is a natural isomer of sucrose. It is an emerging functional sweetener of the next generation. Turanose is catalytically synthesized from the sucrose biomass by employing amylosucrase enzyme. In this study, a novel gene encoding amylosucrase (As_met) has been identified from the metagenome of a thermal aquatic habitat. As_met exhibits 37-55% identity at the protein level with the known amylosucrases characterized till date. As_met was cloned and expressed in Escherichia coli, followed by protein purification, and characterization. As_met protein exhibited the maximum total activity at 9.0 pH and 60 °C temperature, whereas, 8.0 pH and 50 °C temperature were found optimum for transglycosylation activity. As_met showed fairly high thermal tolerance at 50 °C. The conjugation of As_met protein with functionalized iron nanoparticles significantly improved its thermal tolerance, showing hardly any loss in the enzyme's activity even after 72 h of heat (50 °C) exposure. The turanose yield of about 47% was achieved from 1.5 M sucrose, containing 0.5 M fructose in the reaction. Turanose was purified (˜95%) via a bio-physical process, and characterized by TLC, HPLC, and NMR. The novel amylosucrase gene was demonstrated to be a potential candidate for turanose production, utilizing various sucrose containing feedstocks.