1
|
Liao G, Sun E, Kana EBG, Huang H, Sanusi IA, Qu P, Jin H, Liu J, Shuai L. Renewable hemicellulose-based materials for value-added applications. Carbohydr Polym 2024; 341:122351. [PMID: 38876719 DOI: 10.1016/j.carbpol.2024.122351] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2024] [Revised: 05/28/2024] [Accepted: 05/29/2024] [Indexed: 06/16/2024]
Abstract
The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.
Collapse
Affiliation(s)
- Guangfu Liao
- National Forestry and Grassland Administration Key Laboratory of Plant Fiber Functional Materials, College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China
| | - Enhui Sun
- Key Laboratory of Saline-Alkali Soil Improvement and Utilization (Coastal Saline-Alkali Lands), Ministry of Agriculture and Rural Affairs, Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China; School of Life Sciences, College of Agriculture, Engineering and Science, University of KwaZulu-Natal (Pietermaritzburg Campus), Private Bag X01, Scottsville 3209, South Africa; School of Environmental and Safety Engineering, Jiangsu University, Zhenjiang 212013, China.
| | - E B Gueguim Kana
- School of Life Sciences, College of Agriculture, Engineering and Science, University of KwaZulu-Natal (Pietermaritzburg Campus), Private Bag X01, Scottsville 3209, South Africa
| | - Hongying Huang
- Key Laboratory of Saline-Alkali Soil Improvement and Utilization (Coastal Saline-Alkali Lands), Ministry of Agriculture and Rural Affairs, Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China
| | - Isaac A Sanusi
- School of Life Sciences, College of Agriculture, Engineering and Science, University of KwaZulu-Natal (Pietermaritzburg Campus), Private Bag X01, Scottsville 3209, South Africa
| | - Ping Qu
- Key Laboratory of Saline-Alkali Soil Improvement and Utilization (Coastal Saline-Alkali Lands), Ministry of Agriculture and Rural Affairs, Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China
| | - Hongmei Jin
- Key Laboratory of Saline-Alkali Soil Improvement and Utilization (Coastal Saline-Alkali Lands), Ministry of Agriculture and Rural Affairs, Jiangsu Collaborative Innovation Center for Solid Organic Waste Resource Utilization, Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences, Nanjing 210014, China
| | - Jun Liu
- School of Environmental and Safety Engineering, Jiangsu University, Zhenjiang 212013, China
| | - Li Shuai
- National Forestry and Grassland Administration Key Laboratory of Plant Fiber Functional Materials, College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350002, China..
| |
Collapse
|
2
|
Xu C, Yang S, Chen A, Wang X, Liu Z, Han W. Eco-friendly cellulose-based antioxidation film by partial esterification. Int J Biol Macromol 2024; 272:132808. [PMID: 38825278 DOI: 10.1016/j.ijbiomac.2024.132808] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/06/2023] [Revised: 05/22/2024] [Accepted: 05/30/2024] [Indexed: 06/04/2024]
Abstract
Cellulose nanocrystals (CNCs) have received increasing attention because of their superior dispersion and thermal stability. In this study, TEMPO-oxidized cellulose nanocrystal (TOCNC) multifunctional antioxidationantioxidation films (TOCNC-GA film) were prepared by the esterification of TOCNC and gallic acid (GA). TOCNC-GAX films, where X represents the ratio of the amount of GA to the amount of TOCNC, were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The films with the GA:TOCNC ratio of 1:1 achieved higher interfacial compatibility than the other films. The mechanical properties and water resistance of the TOCNC-GA films were superior than those of pure TOCNC films. Moreover, the original TOCNC structure changed owing to the presence of GA, which endowed a certain thermoplasticity owing to the formation of ester groups. The antioxidation properties of the TOCNC-GA1 films reached 43.8 % and 71.85 % after 6 and 24 h, respectively, as evaluated by the 2,2-biphenyl-1-picrylhydrazyl method and the free radical scavenging activities of the TOCNC-GA1 films. The innovative development of the functional antioxidation film presented in this paper has great potential for use in antioxidation packaging materials and food preservation.
Collapse
Affiliation(s)
- Chunmei Xu
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Shuo Yang
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Anxiang Chen
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Xiaole Wang
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China
| | - Zhuqing Liu
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China.
| | - Wenjia Han
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan 250353, China.
| |
Collapse
|
3
|
Dias IP, Barbieri SF, da Costa Amaral S, Silveira JLM. Development and characterization of films from Campomanesia xanthocarpa and commercial citrus pectins with different degrees of methyl-esterification. Int J Biol Macromol 2024; 257:128554. [PMID: 38056731 DOI: 10.1016/j.ijbiomac.2023.128554] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2023] [Revised: 11/17/2023] [Accepted: 11/30/2023] [Indexed: 12/08/2023]
Abstract
In this study, pectins from commercial citrus and isolated from gabiroba (Campomanesia xanthocarpa) fruits, were obtained with different degrees of methyl-esterification (DM) and applied in the films. The DM ranged from 0 % to 62.5 % and the gradual de-esterification process was confirmed by mono-dimensional analysis (1H NMR). In order to investigate the influence of DM values in pectin film properties, PCP (DM: 62.5 %); PCP-5 (DM: 37.4 %); PCP-15 (DM: 19.1 %), and a fully de-esterified sample PCP-35 (DM: 0 %) were selected. The functional properties of the films clearly showed that the DM and cross-linking process are necessary to obtain a material with water resistance. Furthermore, pectin isolated from the fruits of gabiroba was purified (GW-Na, DM: 51.9 %) and partially de-esterified (GW-Na-5, DM: 37.1 %). These pectins were used, for the first time, in development of films and the physical and mechanical properties were compared with films made with PCP and PCP-5 samples. GW-Na and GW-Na-5 films presented suitable properties, with reduced solubility reduced (57.1 and 26.2 %), high degree of swelling (2.14 and 2.26), low flexibility (18.05 and 6.11 MPa), respectively. High strength and rigidity (99.36 and 1040.9 MPa), for both films (GW-Na and GW-Na-5) were demonstrated, similar to that obtained by analyzed citrus pectin.
Collapse
Affiliation(s)
- Isabela Pereira Dias
- Postgraduate Program in Biochemistry Sciences, Sector of Biological Sciences, Federal University of Paraná, Curitiba, PR 81531-990, Brazil
| | - Shayla Fernanda Barbieri
- Postgraduate Program in Biochemistry Sciences, Sector of Biological Sciences, Federal University of Paraná, Curitiba, PR 81531-990, Brazil
| | - Sarah da Costa Amaral
- Postgraduate Program in Biochemistry Sciences, Sector of Biological Sciences, Federal University of Paraná, Curitiba, PR 81531-990, Brazil
| | - Joana Léa Meira Silveira
- Postgraduate Program in Biochemistry Sciences, Sector of Biological Sciences, Federal University of Paraná, Curitiba, PR 81531-990, Brazil.
| |
Collapse
|
4
|
Chen S, Feng J, Jiang F, Briber RM, Wang H. Facile preparation of near-monodisperse oligocellulose and its elastomeric derivatives with tunable mechanical properties. Carbohydr Polym 2024; 324:121493. [PMID: 37985085 DOI: 10.1016/j.carbpol.2023.121493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2023] [Revised: 09/28/2023] [Accepted: 10/12/2023] [Indexed: 11/22/2023]
Abstract
Oligocellulose (OC) with low polydispersity indices has been produced in large quantities using an improved method of acid-assisted hydrolysis, in which long cellulose chains disintegrate in concentrated phosphoric acid at moderately elevated temperatures. The hydrolysis time has been reduced by three orders of magnitude without compromising the overall yield of the process or the quality of OC products. The efficient production of high-quality OCs in large quantities allows for developing OC-derived elastomeric materials. A series of OC-graft-poly(isobornyl methacrylate-random-n-butyl acrylate) [OC-g-P(IBOMA-r-BA)] elastomers have been synthesized via activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP). OC-g-P(IBOMA-r-BA) elastomers have tunable molecular architectures and phase morphologies toward desirable mechanical properties and thermal stability suitable for various applications. The methodologies of the OC production and the graft-polymers synthesis in this study would help advance technologies for broader applications of bio-based elastomers.
Collapse
Affiliation(s)
- Shuaishuai Chen
- Biomass Molecular Engineering Center, Anhui Provincial Engineering Center for High Performance Biobased Nylons, Department of Materials Science and Engineering, Anhui Agricultural University, Hefei, Anhui 230036, China
| | - Jiajun Feng
- Biomass Molecular Engineering Center, Anhui Provincial Engineering Center for High Performance Biobased Nylons, Department of Materials Science and Engineering, Anhui Agricultural University, Hefei, Anhui 230036, China
| | - Feng Jiang
- Biomass Molecular Engineering Center, Anhui Provincial Engineering Center for High Performance Biobased Nylons, Department of Materials Science and Engineering, Anhui Agricultural University, Hefei, Anhui 230036, China; Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA.
| | - Robert M Briber
- Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
| | - Howard Wang
- Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA; Spallation Neutron Source Science Center, Dongguan, Guangdong 523803, China.
| |
Collapse
|
5
|
Liu C, Li Y, Gai X, Xiang Z, Jiang W, He S, Liu Y, Xiao H. Advances in green materials derived from wood for detecting and removing mercury ions in water. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2023; 335:122351. [PMID: 37567404 DOI: 10.1016/j.envpol.2023.122351] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Revised: 06/25/2023] [Accepted: 08/08/2023] [Indexed: 08/13/2023]
Abstract
The issue of mercury pollution in environmental remediation has garnered significant attention due to its severe health hazards to humans. Various strategies have been devised to mitigate the impact of toxic mercury ions, including coagulation, ion exchange, adsorption, membrane technology, and electrochemical treatment. Among these approaches, adsorption has emerged as an efficient and widely employed method for the uptake of low concentrations of mercury ions. It offers convenient operation, high removal efficiency, and facile regeneration of the adsorbent. Wood, being the most abundant renewable and sustainable bioresource, has garnered attention as a promising material for treating heavy metal wastewater. This is attributed to its unique physical and chemical characteristics, encompassing hierarchical pores, aligned channels, active functional groups, biodegradability, and cost-effectiveness. However, a comprehensive examination of the cutting-edge applications of wood and wood-derived biopolymers in the detection and removal of mercury ions from wastewater has yet to be undertaken. Consequently, this article presents a chronological overview of recent advancements in materials and structures derived from bulk wood and its constituents, including cellulose, lignin, hemicellulose, and tannin, with a specific focus on their utility in detecting and eliminating mercury from water sources. Subsequently, the most promising techniques and strategies involving wood and wood-derived biopolymers in addressing the predicament of mercury pollution are explored. Furthermore, this piece offers insights into the existing challenges and future prospects concerning environmentally friendly materials derived from wood, aiming to foster the development of cost-effective mercury adsorbents and detection devices.
Collapse
Affiliation(s)
- Chao Liu
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan, 250353, China; International Innovation Center for Forest Chemicals and Materials and Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing, 210037, China; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China
| | - Yu Li
- International Innovation Center for Forest Chemicals and Materials and Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing, 210037, China
| | - Xiaoqian Gai
- International Innovation Center for Forest Chemicals and Materials and Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing, 210037, China
| | - Zhouyang Xiang
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China
| | - Weikun Jiang
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan, 250353, China
| | - Shuaiming He
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China.
| | - Yu Liu
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology, Shandong Academy of Sciences, Jinan, 250353, China
| | - Huining Xiao
- Department of Chemical Engineering, University of New Brunswick, Fredericton, New Brunswick, E3B5A3, Canada
| |
Collapse
|
6
|
Durmaz E, Sertkaya S, Yilmaz H, Olgun C, Ozcelik O, Tozluoglu A, Candan Z. Lignocellulosic Bionanomaterials for Biosensor Applications. MICROMACHINES 2023; 14:1450. [PMID: 37512761 PMCID: PMC10384395 DOI: 10.3390/mi14071450] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/01/2023] [Revised: 07/14/2023] [Accepted: 07/16/2023] [Indexed: 07/30/2023]
Abstract
The rapid population growth, increasing global energy demand, climate change, and excessive use of fossil fuels have adversely affected environmental management and sustainability. Furthermore, the requirements for a safer ecology and environment have necessitated the use of renewable materials, thereby solving the problem of sustainability of resources. In this perspective, lignocellulosic biomass is an attractive natural resource because of its abundance, renewability, recyclability, and low cost. The ever-increasing developments in nanotechnology have opened up new vistas in sensor fabrication such as biosensor design for electronics, communication, automobile, optical products, packaging, textile, biomedical, and tissue engineering. Due to their outstanding properties such as biodegradability, biocompatibility, non-toxicity, improved electrical and thermal conductivity, high physical and mechanical properties, high surface area and catalytic activity, lignocellulosic bionanomaterials including nanocellulose and nanolignin emerge as very promising raw materials to be used in the development of high-impact biosensors. In this article, the use of lignocellulosic bionanomaterials in biosensor applications is reviewed and major challenges and opportunities are identified.
Collapse
Affiliation(s)
- Ekrem Durmaz
- Department of Forest Industrial Engineering, Kastamonu University, 37200 Kastamonu, Turkey
| | - Selva Sertkaya
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
| | - Hande Yilmaz
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
| | - Cagri Olgun
- Department of Forest Industrial Engineering, Kastamonu University, 37200 Kastamonu, Turkey
| | - Orhan Ozcelik
- Department of Aerospace Engineering, Ankara Yildirim Beyazit University, 06010 Ankara, Turkey
| | - Ayhan Tozluoglu
- Department of Forest Industrial Engineering, Duzce University, 81620 Duzce, Turkey
- Biomaterials and Nanotechnology Research Group & BioNanoTeam, 34473 Istanbul, Turkey
| | - Zeki Candan
- Biomaterials and Nanotechnology Research Group & BioNanoTeam, 34473 Istanbul, Turkey
- Department of Forest Industrial Engineering, Istanbul University Cerrahpasa, 34473 Istanbul, Turkey
| |
Collapse
|
7
|
Eelager MP, Masti SP, Chougale RB, Hiremani VD, Narasgoudar SS, Dalbanjan NP, S K PK. Evaluation of mechanical, antimicrobial, and antioxidant properties of vanillic acid induced chitosan/poly (vinyl alcohol) active films to prolong the shelf life of green chilli. Int J Biol Macromol 2023; 232:123499. [PMID: 36736522 DOI: 10.1016/j.ijbiomac.2023.123499] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2022] [Revised: 01/21/2023] [Accepted: 01/28/2023] [Indexed: 02/01/2023]
Abstract
Vanillic acid incorporated chitosan/poly(vinyl alcohol) active films were prepared by employing a cost-effective solvent casting technique. FTIR investigation validated the intermolecular interaction and formation of Schiff's base (C=N) between functional groups of vanillic acid, chitosan, and poly(vinyl alcohol). The addition of vanillic acid resulted in homogenous and dense morphology, as confirmed by SEM micrographs. The tensile strength of active films increased from 32 to 59 MPa as the amount of vanillic acid increased and the obtained values are more significant than reported polyethylene (2231 MPa) and polypropylene (31-38 MPa) films, widely utilized in food packaging. Active film's UV, water, and oxygen barrier properties exhibited excellent results with the incorporation of vanillic acid. Around 40 % of degradation commences within 15 days. Synergistic impact against S. aureus, E. coli, and C. albicans pathogens caused the expansion of the inhibition zone, evidenced by the excellent antimicrobial activity. The highest antioxidant capacity, 73.65 % of CPV-4 active film, proved that active films could prevent the spoilage of food from oxidation. Green chillies packaging was carried out to examine the potential of prepared active films as packaging material results in successfully sustaining carotenoid accumulation and prolonging the shelf life compared to conventional polyethylene (PE) packaging.
Collapse
Affiliation(s)
- Manjunath P Eelager
- Department of Chemistry, Karnatak Science College, Dharwad 580 001, Karnataka, India
| | - Saraswati P Masti
- Department of Chemistry, Karnatak Science College, Dharwad 580 001, Karnataka, India.
| | - Ravindra B Chougale
- PG Department of Studies in Chemistry, Karnatak University, Dharwad 580 003, Karnataka, India
| | - Vishram D Hiremani
- Department of Chemistry, Tungal School of Basic and Applied Sciences, Jamkhandi 587301, Karnataka, India
| | | | | | - Praveen Kumar S K
- PG Department of Studies in Biochemistry, Karnatak University, Dharwad 580 003, Karnataka, India
| |
Collapse
|
8
|
Hemicellulose: Structure, Chemical Modification, and Application. Prog Polym Sci 2023. [DOI: 10.1016/j.progpolymsci.2023.101675] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/15/2023]
|
9
|
Research Progress in Hemicellulose-Based Nanocomposite Film as Food Packaging. Polymers (Basel) 2023; 15:polym15040979. [PMID: 36850261 PMCID: PMC9964622 DOI: 10.3390/polym15040979] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 02/12/2023] [Accepted: 02/13/2023] [Indexed: 02/18/2023] Open
Abstract
As the main component of agricultural and forestry biomass, hemicellulose has the advantages of having an abundant source, biodegradability, nontoxicity and good biocompatibility. Its application in food packaging has thus become the focus of efficient utilization of biomass resources. However, due to its special molecular structure and physical and chemical characteristics, the mechanical properties and barrier properties of hemicellulose films are not sufficient, and modification for performance enhancement is still a challenge. In the field of food packaging materials preparation, modification of hemicellulose through blending with nanofibers or nanoparticles, both inorganic and organic, has attracted research attention because this approach offers the advantages of efficient improvement in the expected properties and better cost efficiency. In this paper, the composition of hemicellulose, the classification of nanofillers and the research status of hemicellulose-based nanocomposite films are reviewed. The research progress in modification of hemicellulose by using layered silicate, inorganic nanoparticles and organic nanoparticles in food packaging is described. Challenges and outlook of research in hemicellulose-based nanocomposite film in food packaging is discussed.
Collapse
|
10
|
Chibrikov V, Pieczywek PM, Zdunek A. Tailor-Made Biosystems - Bacterial Cellulose-Based Films with Plant Cell Wall Polysaccharides. POLYM REV 2022. [DOI: 10.1080/15583724.2022.2067869] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Vadym Chibrikov
- Institute of Agrophysics, Polish Academy of Sciences, Lublin, Poland
| | | | - Artur Zdunek
- Institute of Agrophysics, Polish Academy of Sciences, Lublin, Poland
| |
Collapse
|
11
|
Feng C, Zhu J, Hou Y, Qin C, Chen W, Nong Y, Liao Z, Liang C, Bian H, Yao S. Effect of temperature on simultaneous separation and extraction of hemicellulose using p-toluenesulfonic acid treatment at atmospheric pressure. BIORESOURCE TECHNOLOGY 2022; 348:126793. [PMID: 35121097 DOI: 10.1016/j.biortech.2022.126793] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/09/2022] [Revised: 01/26/2022] [Accepted: 01/27/2022] [Indexed: 06/14/2023]
Abstract
Hemicelluloses were effectively separated using p-toluenesulfonic acid (p-TsOH) treatment at high temperature. High temperature and pressure promoted hydrolysis of hemicellulose, which limited its value upon recovery. In this study, bagasse hemicellulose was separated and extracted by p-TsOH treatment at atmospheric pressure. The effects of temperature, p-TsOH concentration, and time on hemicellulose separation and extraction were investigated. The optimal conditions were 80 °C, 3.0% p-TsOH, and 120 min. The separation and extraction yield of hemicellulose was 73.23% and 36.02%, respectively. Extraction hemicellulose with 95.60% purity was obtained. In addition, the dissolution mechanism of hemicellulose was analyzed. Degradation of β-glycosidic bonds was inhibited. Benzyl ether bond between carbohydrates and lignin was selectively cleaved. The skeleton structure of xylan in hemicellulose was protected while the functional groups of branch chain were severely damaged. It provides a valuable theoretical basis for the efficient separation and extraction of hemicellulose.
Collapse
Affiliation(s)
- Chengqi Feng
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Jiatian Zhu
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Yajun Hou
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chengrong Qin
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Wangqian Chen
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Yuhao Nong
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Zhangpeng Liao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Chen Liang
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China
| | - Huiyang Bian
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing 210037, PR China
| | - Shuangquan Yao
- Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control, School of Light Industrial and Food Engineering, Guangxi University, Nanning 530004, PR China.
| |
Collapse
|
12
|
Kaschuk JJ, Al Haj Y, Rojas OJ, Miettunen K, Abitbol T, Vapaavuori J. Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2104473. [PMID: 34699648 DOI: 10.1002/adma.202104473] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/11/2021] [Revised: 10/13/2021] [Indexed: 06/13/2023]
Abstract
This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described. Mapping the optical landscape that is accessible from lignocellulosics is shown as an essential step toward their utilization in smart devices. Advanced materials built from sustainable resources, including those obtained from industrial or agricultural side streams, demonstrate enormous promise in optoelectronics due to their potentially lower cost, while meeting or even exceeding current demands in performance. The requirements are summarized for the production and application of plant-based optically functional materials in different smart material applications and the review is concluded with a perspective about this active field of knowledge.
Collapse
Affiliation(s)
- Joice Jaqueline Kaschuk
- Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Box 16300, Aalto, Espoo, 00076, Finland
| | - Yazan Al Haj
- Department of Chemistry and Materials Science, School of Chemical Engineering, Aalto University, Aalto, FI-00076, Finland
| | - Orlando J Rojas
- Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Box 16300, Aalto, Espoo, 00076, Finland
- Bioproducts Institute, Departments of Chemical Engineering, Department of Biological Engineering, Department of Chemistry, Department of Wood Science, 2360 East Mall, The University of British Columbia, Vancouver, BC, V6T 1Z3, Canada
| | - Kati Miettunen
- Department of Mechanical and Materials Engineering, Faculty of Technology, University of Turku, Turku, FI-20500, Finland
| | - Tiffany Abitbol
- RISE Research Institutes of Sweden, Stockholm, SE-114 28, Sweden
| | - Jaana Vapaavuori
- Department of Chemistry and Materials Science, School of Chemical Engineering, Aalto University, Aalto, FI-00076, Finland
| |
Collapse
|
13
|
Wu H, Li J, Wu Y, Gao H, Guan Y. High-Performanced Hemicellulose Based Organic-Inorganic Films with Polyethyleneimine. Polymers (Basel) 2021; 13:3777. [PMID: 34771333 PMCID: PMC8587527 DOI: 10.3390/polym13213777] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2021] [Revised: 10/29/2021] [Accepted: 10/29/2021] [Indexed: 11/17/2022] Open
Abstract
For the high-value utilization of hemicellulose-based composite films, the poor film-forming and mechanical properties of hemicellulose-based composite films must be surmounted crucially. Based on this, hemicellulose-based organic-inorganic composite films with good mechanical properties were prepared from quaternized hemicelluloses (QH), bentonite, and polyethyleneimine (PEI). The QH/PEI/bentonite composite films were prepared by vacuum filtration, and the properties of the composite film were investigated. The results showed that the QH was inserted into bentonite nanosheets through hydrogen bonding and electrostatic interactions. PEI was cross-linked with hemicellulose by hydroxyl groups, electrostatically attracted by the bentonite flake layers. The mechanical properties of the composite films were significantly increased by the incorporation of PEI. When the PEI content was 20%, the tensile stress of the composite film was increased by 155.18%, and the maximum tensile stress was reached 80.52 MPa. The composite films had strong UV absorption ability with the transmittance was almost 0 in the UV region from 200 to 300 nm. The thermal property of composite film was also improved, and the residual mass increased by three times compared to QH. These results provide a theoretical basis for the use of hemicellulose-based composite films in packaging applications.
Collapse
Affiliation(s)
- Han Wu
- School of Forestry & Landscape Architecture, Anhui Agricultural University, Hefei 230036, China; (H.W.); (J.L.); (Y.W.)
| | - Jing Li
- School of Forestry & Landscape Architecture, Anhui Agricultural University, Hefei 230036, China; (H.W.); (J.L.); (Y.W.)
| | - Yule Wu
- School of Forestry & Landscape Architecture, Anhui Agricultural University, Hefei 230036, China; (H.W.); (J.L.); (Y.W.)
| | - Hui Gao
- School of Forestry & Landscape Architecture, Anhui Agricultural University, Hefei 230036, China; (H.W.); (J.L.); (Y.W.)
| | - Ying Guan
- School of Forestry & Landscape Architecture, Anhui Agricultural University, Hefei 230036, China; (H.W.); (J.L.); (Y.W.)
- Biomass Molecular Engineering Center, Anhui Agricultural University, Heifei 230036, China
| |
Collapse
|
14
|
Guo X, Ma Z, Wang H, Lv Y. Design and mechanism of controllable respiration
polyamideamine‐epichlorohydrin
modied sugarcane bagasse pith hemicellulose film. J Appl Polym Sci 2021. [DOI: 10.1002/app.50653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Xin Guo
- School of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian China
| | - Zhiyu Ma
- School of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian China
| | - Haisong Wang
- School of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian China
| | - Yanna Lv
- School of Light Industry and Chemical Engineering Dalian Polytechnic University Dalian China
- State Key Laboratory of Pulp and Paper Engineering South China University of Technology Guangzhou China
| |
Collapse
|
15
|
Liu C, Luan P, Li Q, Cheng Z, Xiang P, Liu D, Hou Y, Yang Y, Zhu H. Biopolymers Derived from Trees as Sustainable Multifunctional Materials: A Review. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2001654. [PMID: 32864821 DOI: 10.1002/adma.202001654] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/08/2020] [Revised: 05/15/2020] [Indexed: 05/22/2023]
Abstract
The world is currently transitioning from a fossil-fuel-driven energy economy to one that is supplied by more renewable and sustainable materials. Trees as the most abundant renewable bioresource have attracted significant attention for advanced materials and manufacturing in this epochal transition. Trees are composed with complex structures and components such as trunk (stem and bark), leaf, flower, seed, and root. Although many excellent reviews have been published regarding advanced applications of wood and wood-derived biopolymers in different fields, such as energy, electronics, biomedical, and water treatment, no reviews have revisited and systematically discussed functional materials and even devices derived from trees in a full scope yet. Therefore, a timely summary of the recent development of materials and structures derived from different parts of trees for sustainability is prsented here. A concise introduction to the different parts of the trees is given first, which is followed by the corresponding chemistry and preparation of functional materials using various biopolymers from trees. The most promising applications of biopolymer-based materials are discussed subsequently. A comprehensive review of the different parts of trees as sustainable functional materials and devices for critical applications is thus provided.
Collapse
Affiliation(s)
- Chao Liu
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| | - Pengcheng Luan
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| | - Qiang Li
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| | - Zheng Cheng
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China
| | - Pengyang Xiang
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| | - Detao Liu
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China
| | - Yi Hou
- State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, 510640, China
| | - Yang Yang
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| | - Hongli Zhu
- Department of Industrial and Mechanical Engineering, Northeastern University, 360 Huntington Ave, Boston, MA, 02115, USA
| |
Collapse
|
16
|
Huang LZ, Ma MG, Ji XX, Choi SE, Si C. Recent Developments and Applications of Hemicellulose From Wheat Straw: A Review. Front Bioeng Biotechnol 2021; 9:690773. [PMID: 34239863 PMCID: PMC8258147 DOI: 10.3389/fbioe.2021.690773] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/04/2021] [Accepted: 05/05/2021] [Indexed: 11/13/2022] Open
Abstract
Hemicellulose is an important component of plant cell walls, which is mainly used in biofuels and bioproducts. The hemicellulose extracted from different plant sources and plant locations has different microstructure and molecule. Wheat straw is an important biomass raw material for the extraction of hemicellulose. The aims of this review are to summary the recent developments and various applications of hemicellulose from wheat straw. The microstructure and molecule of hemicellulose extracted by different methods are comparably discussed. The hemicellulose-based derivatives and composites are also reviewed. Special attention was paid to the applications of hemicellulose such as biofuel production, packaging field, and adsorbent. The problems and developing direction were given based on our knowledge. We expect that this review will put forward to the development and high-value applications of hemicellulose from wheat straw.
Collapse
Affiliation(s)
- Ling-Zhi Huang
- Beijing Key Laboratory of Lignocellulosic Chemistry, Research Center of Biomass Clean Utilization, Engineering Research Center of Forestry Biomass Materials and Bioenergy, College of Materials Science and Technology, Beijing Forestry University, Beijing, China
| | - Ming-Guo Ma
- Beijing Key Laboratory of Lignocellulosic Chemistry, Research Center of Biomass Clean Utilization, Engineering Research Center of Forestry Biomass Materials and Bioenergy, College of Materials Science and Technology, Beijing Forestry University, Beijing, China
| | - Xing-Xiang Ji
- State Key Laboratory of Biobased Material and Green Papermaking, Qilu University of Technology (Shandong Academy of Sciences), Jinan, China
| | - Sun-Eun Choi
- Department of Forest Biomaterials Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon, South Korea
| | - Chuanling Si
- Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin, China
| |
Collapse
|
17
|
Rao J, Lv Z, Chen G, Hao X, Guan Y, Peng F. Fabrication of flexible composite film based on xylan from pulping process for packaging application. Int J Biol Macromol 2021; 173:285-292. [PMID: 33485889 DOI: 10.1016/j.ijbiomac.2021.01.128] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/01/2021] [Revised: 01/17/2021] [Accepted: 01/18/2021] [Indexed: 12/14/2022]
Abstract
To realize the application of xylan based film in food and drug packaging, the poor mechanical property and film-forming property of xylan based film must be overcome. Herein, a good oxygen barrier composite film with desired mechanical properties was prepared based on carboxymethly xylan (CMX), chitosan (CS), and graphene oxide (GO). The results of scanning electron microscope revealed the composite film had a dense and continuous structure, which will endow the composite film with excellent mechanical property. As expected, the composite film with the 0.5% mass fraction of GO exhibited best mechanical property, among which the tensile stress, tensile strain, and Young's modulus of the composite film reached 50.81 MPa, 47.61%, and 1.39 GPa, respectively. The oxygen barrier properties of the composite films significantly increased with the addition of graphene oxide due to the dense, stacked multilayer structure. In addition, these composite films exhibited good antibacterial properties. Therefore, these films show great promise in the field of food packaging and wound dressing due to their excellent mechanical, oxygen barrier and antibacterial properties.
Collapse
Affiliation(s)
- Jun Rao
- Beijing Advanced Innovation Center for Tree Breeding by Molecular Design, Beijing Forestry University, Beijing 100083, China; Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China
| | - Ziwen Lv
- Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China
| | - Gegu Chen
- Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China
| | - Xiang Hao
- Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China
| | - Ying Guan
- Forestry and Landscape Architecture, Anhui Agricultural University, Hefei 230036, China
| | - Feng Peng
- Beijing Advanced Innovation Center for Tree Breeding by Molecular Design, Beijing Forestry University, Beijing 100083, China; Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China.
| |
Collapse
|
18
|
Guan Y, Rao J, Wu Y, Gao H, Liu S, Chen G, Peng F. Hemicelluloses-based magnetic aerogel as an efficient adsorbent for Congo red. Int J Biol Macromol 2020; 155:369-375. [DOI: 10.1016/j.ijbiomac.2020.03.231] [Citation(s) in RCA: 25] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2020] [Revised: 03/23/2020] [Accepted: 03/26/2020] [Indexed: 02/06/2023]
|
19
|
Shi J, Zhang H, Yu Y, Yan M, Liu L, Zhu H, Ye Y, Zhao Y, Wang Y, Xia Y, Guo J. Dynamic formation of calcium alginate/polyethylene glycol acrylate dual network fibers enhanced by polyvinyl alcohol microcrystalline cross-linking. NEW J CHEM 2020. [DOI: 10.1039/d0nj03538f] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The dual network fiber was prepared by the freeze–thaw low-temperature melting method, the “one-pot method” and the dynamic forming method.
Collapse
|
20
|
Fabrication of new generation of co-delivery systems based on graphene-g-cyclodextrin/chitosan nanofiber. Int J Biol Macromol 2019; 156:1126-1134. [PMID: 31751719 DOI: 10.1016/j.ijbiomac.2019.11.144] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2019] [Revised: 11/06/2019] [Accepted: 11/18/2019] [Indexed: 01/05/2023]
Abstract
Although many techniques have been devoted to promote therapeutic purposes of drug carrier systems, however, there are still many challenges in this area. Here, we designed co-loaded delivery systems, composed of curcumin loaded cyclodextrin-graphene oxide core (Cur@CD-GO) and gallic acid loaded chitosan shell nanofibers (Cur-Ga NF), which can promote the therapeutic efficiency of drugs. The synthesized nanofibres were fabricated by electrospinning technique with the coaxial system. Results showed that co-loaded delivery systems (Cur-Ga NF) provide better performance over single drug-loaded NFs (Cur@CD-GO). It was demonstrated that the nanofibers were successfully prepared, and the drugs in the core and sell of nanofibers were released in a controlled and sustained manner. The produced Cur-Ga NF, providing improved anti-cancer activity, antimicrobial activity, antioxidant activity and anti-inflammatory outcome as compared to single drug-loaded NFs. Our investigations showed that such co-delivery fiber systems could be employed as a promising nanocarrier for therapeutic applications.
Collapse
|
21
|
Wang S, Farnood R, Yan N. Corn-derived dendrimer-like carbohydrate phytoglycogen nanoparticles as selective fluorescent sensor for silver ions. Carbohydr Polym 2019; 223:115095. [DOI: 10.1016/j.carbpol.2019.115095] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2019] [Revised: 07/10/2019] [Accepted: 07/15/2019] [Indexed: 01/09/2023]
|