In-situ mineralized robust polysiloxane–Ag@ZnO on cotton for enhanced photocatalytic and antibacterial activities

Novel photo and bio-active greyish-black cotton fabric through air- and nitrogen- carbonized zinc-based MOF for developing durable functional textiles

This study explores the potential of using the carbonization of Zn-based metal-organic frameworks (Zn-MOF-5) under N2 and air to modify zinc oxide (ZnO) nanoparticle for the production of various photo and bio-active greyish-black cotton fabrics. The MOF-derived ZnO under N2 demonstrated a significantly higher specific surface area (259 m2g-1) compared to ZnO (12 m2g-1) and MOF-derived ZnO under air (41.6 m2 g-1). The products were characterized using various techniques, including FTIR, XRD, XPS, FE-SEM, TEM, HRTEM, TGA, DLS, and EDS. The tensile strength and dye degradation properties of the treated fabrics were also investigated. The results indicate that the high dye degradation capability of MOF-derived ZnO under N2 is likely due to the lower ZnO band gap energy and improvement in electron-hole pair stability. Additionally, the antibacterial activities of the treated fabrics against Staphylococcus and Pseudomonas aeruginosa were investigated. The cytotoxicity of the fabrics was studied on human fibroblast cell lines using an MTT assay. The study findings demonstrate that the cotton fabric covered with carbonized Zn-MOF under N2 is human-cell compatible while showing high antibacterial activities and stability against washing, highlighting its potential for use in developing functional textiles with enhanced properties.

Improved cotton fabrics properties using zinc oxide-based nanomaterials: A review

Zinc oxide nanoparticles (ZnO NPs) have gained significant attention in the textile industry for their ability to enhance the physicochemical properties of fabrics. In recent years, there has been a growing focus on the development of ZnO-based nanomaterials and their applications for cotton and other fabrics. This review paper provides an overview of the synthesis and diverse applications of ZnO-based nanomaterials for textile fabrics, including protection against UV irradiation, bacteria, fungi, microwave, electromagnetic radiation, water, and fire. Furthermore, the study offers the potential of these materials in energy harvesting applications, such as wearable pressure sensors, piezoelectric nanogenerators, supercapacitors, and human energy harvesting. Additionally, we discuss the potential of ZnO-based nanomaterials for environmental cleaning, including water, oil, and solid cleaning. The current research in this area has focused on various materials used to prepare ZnO-based nanocomposites, such as metals/nonmetals, semiconductors, metal oxides, carbon materials, polymers, MXene, metal-organic frameworks, and layered double hydroxides. The findings of this review highlight the potential of ZnO-based nanomaterials to improve the performance of textile fabrics in a range of applications, and the importance of continued research in this field to further advance the development and use of ZnO-based nanomaterials in the textile industry.

Silver-based nanocomposite for fabricating high performance value-added cotton

Cotton is one of the most important cellulose fibers, but the absence of antimicrobial capacity along with the self-cleaning, UV protection and electric conductivity often frustrates its wider applications in many fields. Nanotechnology has provided new insights into the development of functional nanomaterials with unique chemical and physical properties. Silver has been effectively incorporated into the cotton fabrics as the antimicrobial agents due to the strong inhibitory and antimicrobial effects on a broad spectrum of bacteria, fungi and virus with low toxicity to human being. In this review, a variety of strategies have been summarized to load silver on cotton fabrics in situ or ex situ and to fabricate high performance value-added cotton fabrics with self-cleaning, UV protection, electric conductivity and antimicrobial capability depending on the synthesis of silver coating or silver-based nanocomposite coating.

Ag NPs decorated C-TiO2/Cd0.5Zn0.5S Z-scheme heterojunction for simultaneous RhB degradation and Cr(VI) reduction

In this study, heterojunction photocatalysts, XAg@C-TCZ, based on MOF-derived C-TiO₂ and Cd_0.5Zn_0.5S decorated with Ag nanoparticles (Ag NPs) were successfully synthesized through hydrothermal and calcination methods. The catalytic effectiveness of XAg@C-TCZ was evaluated by simultaneous photocatalytic degradation of rhodamine B (RhB) and reduction of Cr(VI) under simulated sunlight irradiation. The presence of the Z-scheme heterojunction was demonstrated through trapping experiments, X-ray photoelectron spectroscopy (XPS), time-resolved photoluminescence (PL) investigations, and electron spin resonance (ESR) spectroscopy. With an initial RhB and Cr(VI) concentration of 7 mg L^-1 and 5 mg L^-1, the catalyst 10Ag@C-TCZ achieved a simultaneous removal of 95.2% and 95.5% within 120 min, respectively. With the same catalyst, the degradation rate of RhB was 2.75 times higher and the reduction rate of Cr(VI) was 9.3 times higher compared to pure Cd_0.5Zn_0.5S. Total organic carbon (TOC) analysis confirmed the extent of mineralization of RhB, while the reduction of Cr(VI) was corroborated by XPS. Compared to pure RhB and Cr(VI) solutions, the reaction rates are smaller in the solution containing both contaminants, which is attributed to the competition for ·O₂^-. 10Ag@C-TCZ also exhibited a stable catalytic performance in tap water and lake water. This work provides a new perspective on the construction of heterojunctions with doped MOF derivatives for the purification of complex pollutant systems.

Low-Temperature Mineralisation of Titania-Siloxane Composite Layers

This paper deals with low-temperature mineralisation of coatings made with titania-siloxane compositions (TSC). Methyltriethoxysilane has been adopted as the precursor for the siloxane, and during its synthesis, an oligomeric siloxane condensate with methyl moieties acting as TiO2 binder has been produced. These methyl moieties, contained in TSC, provide solubility and prevent gelling, but reduce the hydrophilicity of the system, reduce the transfer of electrons and holes generated in the TiO2. In order to avoid these unfavourable effects, TSC mineralisation can be achieved by nonthermal treatment, for example, by using UV-radiation or plasma treatment. Characterisation of the siloxane was performed by gel permeation chromatography (GPC), which showed the size of the siloxane chain. Thermogravimetric analysis revealed a temperature at which the siloxane mineralises to SiO2. Printed layers of two types of TSC with different siloxane contents were studied by a scanning electron microscope (SEM), where a difference in the porosity of the samples was observed. TSC on fluorine-doped tin oxide (FTO) coated glass and microscopic glass were treated with non-thermal UV and plasma methods. TSC on FTO glass were tested by voltammetric measurements, which showed that the non-thermally treated layers have better properties and the amount of siloxane in the TSC has a great influence on their efficiency. Samples on microscopic glass were subjected to a photocatalytic decomposition test of the model pollutant Acid orange 7 (AO7). Non-thermally treated samples show higher photocatalytic activity than the raw sample.

Fabrication and Potential Applications of Highly Durable Superhydrophobic Polyethylene Terephthalate Fabrics Produced by In-Situ Zinc Oxide (ZnO) Nanowires Deposition and Polydimethylsiloxane (PDMS) Packaging

Considerable attention has been devoted to the in-situ deposition of zinc oxide (ZnO) nanowires (ZnO-NWs) on the surface of organic supports, due to their very wide applications in superhydrophobicity, UV shielding, and nanogenerators. However, the poor interfacial bond strength between ZnO-NWs and its support limits their applications. Herein, we developed a facile process to grow robust ZnO-NWs on a polyethylene terephthalate (PET) fabric surface through simultaneous radiation-induced graft polymerization, hydrothermal processing, and in-situ nano-packaging; the obtained materials were denoted as PDMS@ZnO-NWs@PET. The introduction of an adhesion and stress relief layer greatly improved the attachment of the ZnO-NWs to the support, especially when the material was subjected to extreme environment conditions of external friction forces, strong acidic or alkaline solutions, UV-irradiation and even washing with detergent for a long time. The PDMS@ZnO-NWs@PET material exhibited excellent UV resistance, superhydrophobicity, and durability. The ZnO-NWs retained on the fabric surface even after 30 cycles of accelerated washing. Therefore, this process can be widely applied as a universal approach to overcome the challenges associated with growing inorganic nanowires on polymeric support surfaces.

Photocatalytic Performance and Mechanism Research of Ag/HSTiO2 on Degradation of Methyl Orange

The Sol-gel method is successfully used to prepare high specific surface area TiO₂ (HSTiO₂). Then, the photodeposition method is used to composite silver particles with HSTiO₂. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller, and UV-vis spectroscopy are used to characterize the Ag/HSTiO₂ nanocomposites. It can be concluded that the prepared TiO₂ has a large specific surface area, reaching 125.5 m² g^-1. Additionally, the addition of silver particles successfully broadens the photoresponse range from the UV region to the visible light region. In order to evaluate the photocatalytic activity of Ag/HSTiO₂, we conducted the methyl orange degradation test. The results showed that the photocatalytic activity of the sample is significantly higher than that of pure TiO₂.

Flexible and Thermally Induced Switchable Fire Alarm Fabric Based On Layer-by-Layer Self-Assembled Silver Sheet/Fe3O4 Nanowire Composite

Textiles with fire detection will appeal for the interior decoration of houses and play a critical role in public security. Herein, we fabricated a sandwichlike fire alarm fabric (Ag@Fe₃O₄-MS) based on Fe₃O₄ nanowire (NW) arrays and fish-scale-like silver sheets, designed by in situ layer-by-layer assembly on the surface of polypropylene (PP) nonwoven fabric. The Ag@Fe₃O₄-MS sensor has fish-scale-like silver sheets as self-assembling electrode layers on the upper and lower sides of fabric, which can be tailored into various shapes and integrated into other flexible electronics. The sensor provides a real-time monitoring strategy for early warning fire detection (below 100 °C). At room temperature, the fabricated Ag@Fe₃O₄-MS sensor is electrically insulating, while it switches to an electrical conductor when exposed to flame. In view of its fast response time (2 s) and sustained working time (at least 15 min), the sensor with a connected alarm light can immediately alert people of house fires. More importantly, this sensor can provide additional real-time information on the fire location and reliable real-time monitoring of fire rekindling. The sensor was exposed to fire for successive cycles with an average response of I = 43 mA, confirming the reliable repeatability to detect fires. This ultralight, flexible Ag@Fe₃O₄-MS sensor could have broad applications in home safety. Moreover, the sandwichlike design provides a reliable strategy to modify household fabric items to provide a fire warning function.

Zinc Oxide for Functional Textile Coatings: Recent Advances

The use of ZnO for the functionalization of textile substrates is growing rapidly, since it can provide unique multifunctional properties, such as photocatalytic self-cleaning, antimicrobial activity, UV protection, flame retardancy, thermal insulation and moisture management, hydrophobicity, and electrical conductivity. This paper aims to review the recent progress in the fabrication of ZnO-functionalized textiles, with an emphasis on understanding the specificity and mechanisms of ZnO action that impart individual properties to the textile fibers. The most common synthesis and application processes of ZnO to textile substrates are summarized. The influence of ZnO concentration, particle size and shape on ZnO functionality is presented. The importance of doping and coupling procedures to enhance ZnO performance is highlighted. The need to use binding and seeding agents to increase the durability of ZnO coatings is expressed. In addition to functional properties, the cytotoxicity of ZnO coatings is also discussed. Future directions in the use of ZnO for textile functionalization are identified as well.

Reduced Graphene Oxide–P25 Nanocomposites as Efficient Photocatalysts for Degradation of Bisphenol A in Water

Reduced graphene oxide–titanium dioxide photocatalyst (rGO–TiO2) was successfully synthesized by the hydrothermal method. The rGO–TiO2 was used as photocatalyst for the degradation of bisphenol A (BPA), which is a typical endocrine disruptor of the environment. Characterization of photocatalysts and photocatalytic experiments under different conditions were performed for studying the structure and properties of photocatalysts. The characterization results showed that part of the anatase type TiO2 was converted into rutile type TiO2 after hydrothermal treatment and 1% rGO–P25 had the largest specific surface area (52.174 m2/g). Photocatalytic experiments indicated that 1% rGO–P25 had the best catalytic effect, and the most suitable concentration was 0.5 g/L. When the solution pH was 5.98, the catalyst was the most active. Under visible light, the three photocatalytic mechanisms were ranked as follows: O2•− > •OH > h+. 1% rGO–P25 also had strong photocatalytic activity in the photocatalytic degradation of BPA under sunlight irradiation. 1% rGO–P25 with 0.5 g/L may be a very promising photocatalyst with a variety of light sources, especially under sunlight for practical applications.

Facile preparation and characterization of a nanofiber-coated textile with durable and rechargeable antibacterial activity

A facile and green method was used to prepare a durable and rechargeable antibacterial cotton textile.