Dissolution of cotton cellulose in 1:1 mixtures of 1-butyl-3-methylimidazolium methylphosphonate and 1-alkylimidazole co-solvents

Utilization of Cellulose to Its Full Potential: A Review on Cellulose Dissolution, Regeneration, and Applications

As the most abundant natural polymer, cellulose is a prime candidate for the preparation of both sustainable and economically viable polymeric products hitherto predominantly produced from oil-based synthetic polymers. However, the utilization of cellulose to its full potential is constrained by its recalcitrance to chemical processing. Both fundamental and applied aspects of cellulose dissolution remain active areas of research and include mechanistic studies on solvent-cellulose interactions, the development of novel solvents and/or solvent systems, the optimization of dissolution conditions, and the preparation of various cellulose-based materials. In this review, we build on existing knowledge on cellulose dissolution, including the structural characteristics of the polymer that are important for dissolution (molecular weight, crystallinity, and effect of hydrophobic interactions), and evaluate widely used non-derivatizing solvents (sodium hydroxide (NaOH)-based systems, N,N-dimethylacetamide (DMAc)/lithium chloride (LiCl), N-methylmorpholine-N-oxide (NMMO), and ionic liquids). We also cover the subsequent regeneration of cellulose solutions from these solvents into various architectures (fibers, films, membranes, beads, aerogels, and hydrogels) and review uses of these materials in specific applications, such as biomedical, sorption, and energy uses.

Robust superbase-based emerging solvents for highly efficient dissolution of cellulose

The development of robust solvent systems for cellulose dissolution is of significant importance for cellulose utilization and transformation. Herein, six kinds of novel superbase-based solvents were designed by a combination of 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) with pyridine N-oxide (PyO) or 2-picoline-N-oxide (PiO) for dissolution of cellulose. It was observed that the prepared superbase-based solvents (denoted as DBN-PyO-x and DBN-PiO-4) could efficiently dissolve cellulose at mild temperatures (<80 °C). The chemical structure of the prepared superbase-based solvents and the molar ratio of the components significantly affected the solubility of cellulose, and DBN-PyO-4 showed the best performance with a cellulose solubility of 14.1 wt% 70 °C. The systematic study revealed that the good performance of the prepared superbase-based solvents on cellulose dissolution resulted from the synergistic effect of their ability to form hydrogen bonds and their polarizability.

Production and Surface Modification of Cellulose Bioproducts

Petroleum-based synthetic plastics play an important role in our life. As the detrimental health and environmental effects of synthetic plastics continue to increase, the renewable, degradable and recyclable properties of cellulose make subsequent products the "preferred environmentally friendly" alternatives, with a small carbon footprint. Despite the fact that the bioplastic industry is growing rapidly with many innovative discoveries, cellulose-based bioproducts in their natural state face challenges in replacing synthetic plastics. These challenges include scalability issues, high cost of production, and most importantly, limited functionality of cellulosic materials. However, in order for cellulosic materials to be able to compete with synthetic plastics, they must possess properties adequate for the end use and meet performance expectations. In this regard, surface modification of pre-made cellulosic materials preserves the chemical profile of cellulose, its mechanical properties, and biodegradability, while diversifying its possible applications. The review covers numerous techniques for surface functionalization of materials prepared from cellulose such as plasma treatment, surface grafting (including RDRP methods), and chemical vapor and atomic layer deposition techniques. The review also highlights purposeful development of new cellulosic architectures and their utilization, with a specific focus on cellulosic hydrogels, aerogels, beads, membranes, and nanomaterials. The judicious choice of material architecture combined with a specific surface functionalization method will allow us to take full advantage of the polymer's biocompatibility and biodegradability and improve existing and target novel applications of cellulose, such as proteins and antibodies immobilization, enantiomers separation, and composites preparation.

Facile in situ fabrication of ZnO-embedded cellulose nanocomposite films with antibacterial properties and enhanced mechanical strength via hydrogen bonding interactions

Nano-ZnO were in situ prepared and permanently embedded in regenerated cellulose (RC) films by chemical precipitation to endow antibacterial of films and simultaneously strengthen tensile strength. ZnCl₂ was selected as a promoter of 1-allyl-3-methylimidazolium chloride for cellulose dissolution and as a precursor for nano-ZnO synthesis. Zn²⁺-absorbed cellulose solution was reacted with NaOH under ultrasonic to obtain nano-ZnO embedded RC films. The results indicated that RC films treated with the longest sonication time, highest regeneration solution basicity, and highest cellulose concentration were demonstrated to be the most effective against S. aureus, which agreed well with the dense and homogeneous distribution of high content of nano-ZnO on the film surface. The nanocomposite films achieved particularly high mechanical strength of 202.0 MPa with improved thermal stability. Strong H-bonding formed between nano-ZnO and cellulose, which contributed to high tensile strength and thermal stability of films. This work affords a simple approach to prepare cellulose nanocomposite with outstanding performance for potential application in packaging.

Use of Ionic Liquids and Deep Eutectic Solvents in Polysaccharides Dissolution and Extraction Processes towards Sustainable Biomass Valorization

A shift to a bioeconomy development model has been evolving, conducting the scientific community to investigate new ways of producing chemicals, materials and fuels from renewable resources, i.e., biomass. Specifically, technologies that provide high performance and maximal use of biomass feedstocks into commodities with reduced environmental impact have been highly pursued. A key example comprises the extraction and/or dissolution of polysaccharides, one of the most abundant fractions of biomass, which still need to be improved regarding these processes' efficiency and selectivity parameters. In this context, the use of alternative solvents and the application of less energy-intensive processes in the extraction of polysaccharides might play an important role to reach higher efficiency and sustainability in biomass valorization. This review debates the latest achievements in sustainable processes for the extraction of polysaccharides from a myriad of biomass resources, including lignocellulosic materials and food residues. Particularly, the ability of ionic liquids (ILs) and deep eutectic solvents (DESs) to dissolve and extract the most abundant polysaccharides from natural sources, namely cellulose, chitin, starch, hemicelluloses and pectins, is scrutinized and the efficiencies between solvents are compared. The interaction mechanisms between solvent and polysaccharide are described, paving the way for the design of selective extraction processes. A detailed discussion of the work developed for each polysaccharide as well as the innovation degree and the development stage of dissolution and extraction technologies is presented. Their advantages and disadvantages are also identified, and possible synergies by integrating microwave- and ultrasound-assisted extraction (MAE and UAE) or a combination of both (UMAE) are briefly described. Overall, this review provides key information towards the design of more efficient, selective and sustainable extraction and dissolution processes of polysaccharides from biomass.