Combined stabilizers prepared from cellulose nanocrystals and styrene-maleic anhydride to microencapsulate phase change materials

Synthesis and characterization of microencapsulated paraffin with melamine-urea-formaldehyde shell modified with lignin

The study aims to fabricate MUF/paraffin microcapsules with lignin nanoparticles (LNPs)/ melamine-urea-formaldehyde (MUF) resin as hybrid shell material with different LNPs addition were synthesized in oil-in-water emulsion stabilized synergistically by styrene/maleic anhydride (SMA) and LNPs. The morphological characterization of LNPs was observed by transmission electron microscopy (TEM). The particle size of LNPs, the mean particle size and ξ potentials of SMA/LNPs mixture at pH =4.5 were investigated by zeta potential measurement. Field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analyzer (TGA), and differential scanning calorimetry (DSC) were characterized the morphologies, crystallography, chemical component, thermal stability and phase change properties of MUF/paraffin microcapsules with different LNPs addition. The results showed that MUF/paraffin microcapsules were spherical. The LNPs did not influence the chemical structure or crystal type of MUF/paraffin microcapsules. When the LNPs addition was 0.15 g, the melting enthalpy and crystallization enthalpy is respectively 130.03 and 121.92 J/g and the encapsulation efficiency of MicroC-15 is 61.04 %.

Self-Healing Composite Coating Fabricated with a Cystamine Cross-Linked Cellulose Nanocrystal-Stabilized Pickering Emulsion

A gelled Pickering emulsion system was fabricated by first stabilizing linseed oil droplets in water with dialdehyde cellulose nanocrystals (DACNCs) and then cross-linking with cystamine. Cross-linking of the DACNCs was shown to occur by a reaction between the amine groups on cystamine and the aldehyde groups on the CNCs, causing gelation of the nanocellulose suspension. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the cystamine-cross-linked CNCs (cysCNCs), demonstrating their presence. Transmission electron microscopy images evidenced that cross-linking between cysCNCs took place. This cross-linking was utilized in a linseed oil-in-water Pickering emulsion system, creating a novel gelled Pickering emulsion system. The rheological properties of both DACNC suspensions and nanocellulose-stabilized Pickering emulsions were monitored during the cross-linking reaction. Dynamic light scattering and confocal laser scanning microscopy (CLSM) of the Pickering emulsion before gelling imaged CNC-stabilized oil droplets along with isolated CNC rods and CNC clusters, which had not been adsorbed to the oil droplet surfaces. Atomic force microscopy imaging of the air-dried gelled Pickering emulsion also demonstrated the presence of free CNCs alongside the oil droplets and the cross-linked CNC network directly at the oil-water interface on the oil droplet surfaces. Finally, these gelled Pickering emulsions were mixed with poly(vinyl alcohol) solutions and fabricated into self-healing composite coating systems. These self-healing composite coatings were then scratched and viewed under both an optical microscope and a scanning electron microscope before and after self-healing. The linseed oil was demonstrated to leak into the scratches, healing the gap automatically and giving a practical approach for a variety of potential applications.

Recent Advances in Flexible CNC-Based Chiral Nematic Film Materials

Cellulose nanocrystal (CNC) is a renewable resource derived from lignocellulosic materials, known for its optical permeability, biocompatibility, and unique self-assembly properties. Recent years have seen great progresses in cellulose nanocrystal-based chiral photonic materials. However, due to its inherent brittleness, cellulose nanocrystal shows limitations in the fields of flexible materials, optical sensors and food freshness testing. In order to solve the above limitations, attempts have been made to improve the flexibility of cellulose nanocrystal materials without destroying their structural color. Despite these progresses, a systematic review on them is lacking. This review aims to fill this gap by providing an overview of the main strategies and the latest research findings on the flexibilization of cellulose nanocrystal-based chiral nematic film materials (FCNM). Specifically, typical substances and methods used for their preparation are summarized. Moreover, different kinds of cellulose nanocrystal-based composites are compared in terms of flexibility. Finally, potential applications and future challenges of flexible cellulose nanocrystal-based chiral nematic materials are discussed, inspiring further research in this field.

Tannic acid-coated cellulose nanocrystal-reinforced transparent multifunctional hydrogels with UV-filtering for wearable flexible sensors

Ionically conductive hydrogels are an ideal alternative material for applications in wearable flexible sensors to monitor human health. However, producing hydrogels with both high sensitivity and excellent versatility is difficult, and their transparency and UV-blocking properties are significantly limited. Here, with mussel- and gecko-inspired biomimicry, all-biomass-based hydrogels (OGTCGs) with self-adhesive, self-healing, transparent, UV-filtering, frost-resistant, environmentally stable, antibacterial, and biocompatible properties were designed and constructed via a simple one-step approach with a water/glycerol system and borax added without any crosslinker using synergistic dynamic covalent and noncovalent chemistry. The transparency of the OGTCG hydrogel reached 81.06 %, while the added tannic acid-coated cellulose nanocrystal (TA@CNC) induced a UV-blocking effect. The OGTCG hydrogel exhibited a high toughness (218.67 kPa) and modulus (100.32 kPa) reinforced by TA@CNC. The OGTCG hydrogel showed good self-healing abilities with an efficiency of over 90 % after 6 h. In a binary solvent system, the OGTCG hydrogel had environmental stability, as illustrated by density functional theory (DFT), greatly broadening its application range. Moreover, it had an electrical conductivity of 2.3 mS cm-1 and a sensitivity of 3.97. Therefore, with its rapid response and real-time monitoring capabilities, the OGTCG hydrogel shows great potential for applications in monitoring human health.

Effects of Processing Conditions on the Properties of Monoammonium Phosphate Microcapsules with Melamine-Formaldehyde Resin Shell

To develop monoammonium phosphate (MAP) as a novel acid source for durable intumescent fire retardants (IFR), MAP microcapsules (MCMAPs) containing MAP as the internal core and melamine-formaldehyde (MF) as the external shell were prepared by in situ polymerization in this study. The influences of synthesis conditions (including reaction temperature, polymerization time, and reaction pH value) on the properties of obtained MCMAPs (MAP content, yield, morphologies, and thermal properties) were then investigated systematically. The morphologies, chemical structures, and thermal properties were characterized by optical microscopy, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetry analyzer (TGA). The results show that MAP was well encapsulated by MF resin. No microcapsules are obtained at <55 °C or with polymerization times <1 h. Optimal preparation conditions of reaction temperature, polymerization time, and reaction pH value are 75 °C, 3 h, and 5.5, respectively. Those results provide process reference and theoretical basis for preparing MCMAPs and could promote the application of MAP microcapsules in wood flame-retardant materials.

Microencapsulated phase change material via Pickering emulsion based on xylan nanocrystal for thermoregulating application

Phase change materials (PCM) are promising for thermal regulation and energy storage, but suffer from the deformation and leakage of capsules. Herein, inspired by cellulose nanocrystal (CNC), xylan nanocrystal (XNC) with a dimension of 25-60 nm was successfully prepared through oxalic acid hydrolysis of high-crystalline xylan as raw materials via a top-down approach. With the introduction of hydrophobic groups, compared to XNC, succinylated XNC showed more remarkable emulsifying property over 7 days of storage at room temperature. Microencapsulated PCM composite consisting of sodium alginate (SA) as "matrix" and succinylated xylan nanocrystal (XNC) stabilized paraffin-based Pickering capsule (PCM beads) as "core" was facilely fabricated. PCM composite with the latent heat of 105.59 J·g^-1 showed excellent thermoregulating performance. Our work suggests a new pathway toward sustainability of hemicelluloses in the application of food emulsion and thermal energy management.

Octylamine-Modified Cellulose Nanocrystal-Enhanced Stabilization of Pickering Emulsions for Self-Healing Composite Coatings

Linseed oil-in-water Pickering emulsions are stabilized by both sulfated CNCs (sCNCs) and octylamine-modified CNCs (oCNCs). oCNCs with hydrophobic moieties grafted on the surfaces of otherwise intact nanocrystals provided emulsions exhibiting stronger resistance to creaming of oil droplets, compared with unmodified sCNCs. sCNCs were not able to completely stabilize linseed oil in water at low CNC concentrations while oCNCs provided emulsions with no unemulsified oil residue at the same concentrations. Oil droplets in oCNC emulsions were smaller than those in samples stabilized by sCNCs, corresponding with an increased hydrophobicity of oCNCs. Cryo-SEM imaging of stabilized droplets demonstrated the formation of a CNC network at the oil-water interface, protecting the oil droplets from coalescence even after compaction under centrifugal force. These oil droplets, protected by a stabilized CNC network, were dispersed in a water-based commercial varnish, to generate a composite coating. Scratches made on these coatings self-healed as a result of the reaction of the linseed oil bled from the damaged droplets with oxygen. The leakage and drying of the linseed oil at the location of the scratches happened without intervention and was accelerated by the application of heat.

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.

Macroalgae-derived regenerated cellulose in the stabilization of oil-in-water Pickering emulsions

This study aims to derive regenerated cellulose (RC) from lignin/hemicellulose-free Eucheuma cottonii for its independent stabilization of Pickering emulsion. The RC exhibits a fibrillar morphology with diameters ranging from 17 to 157 nm and stabilizes paraffin oil-Pickering emulsions without any co-stabilizer. It was found that the emulsion stability, viscosities and viscoelasticity correlate positively with RC concentration. All emulsion samples depict gel-like behavior. Under different oil fraction at a constant RC concentration, anomalies were found in emulsion properties. This can be attributed to the aggregating behavior of RC at the oil-water interface, the degree of gel-like structure formation due to materials interaction within the emulsion system, and the variations of microscopic droplet cluster interactions under shear condition. The emulsions portrayed excellent robustness against harsh salinity, high temperature and extreme pH fluctuation. Hence, these findings had elucidated the plausibility of macroalgae-derived RC in enhanced oil recovery application.

Fluorescent nanomaterials combined with molecular imprinting polymer: synthesis, analytical applications, and challenges

Fluorescent nanomaterials (FNMs) and molecular imprinted polymers (MIPs) have been widely used in analytical chemistry for determination. However, low selectivity of FNMs and low sensitivity of MIPs hinder their applications. Combining the merits of FNMs and MIPs, FNMs coated with MIPs (FNMs@MIPs) were proposed to solve those problems. Carbon dots, semiconductor quantum dots, noble metal nanoparticles, silica nanoparticles, and covalent-organic frameworks have been reported to be coated with MIPs. In order to overcome challenges for FNMs@MIPs, such as the lack of handy synthesis routes, incompatibility with aqueous solutions, heterogeneous size of particles, leakage of template molecules, the biocompatibility of FNMs@MIPs, and the inference between FNMs and MIPs, scientists proposed some solutions in recent years. We comprehensively review the newest advances of the FNMs@MIPs, and predict the direction of the future development. Graphical abstract.