Cellulose/chitosan porous spheres prepared from 1-butyl-3-methylimidazolium acetate/dimethylformamide solutions for Cu2+ adsorption

Preparation of N-doped carbon materials from cellulose:chitosan blends and their potential application in electrocatalytic oxygen reduction

Carbon-based electrocatalysts for oxygen reduction reaction (ORR) are prepared by a direct pathway including a two-step thermal treatment process applied to porous spheres of natural biopolymer blends. Cellulose blends with chitosan are first thermally treated at moderate temperatures (e.g., 200 °C), then pyrolyzed at elevated temperature (800–1000 °C), both steps under a constant nitrogen flow. By blending of cellulose with chitosan, the nitrogen content in the final carbon-based catalyst can be considerably increased. The influence of the composition of the precursor biopolymer blend on the ORR electrocatalytic activity is analyzed in correlation with the elemental composition and other structural features of the catalyst. The polymer blend containing cellulose:chitosan = 75:25, thermally treated 1 h at 200 °C and pyrolyzed 1 h at 800 °C under nitrogen atmosphere, shows the highest electrocatalytic ORR activity. This is attributed to an increased surface area combined with relatively high nitrogen content and a higher pyridinic/pyrrolic species ratio.

Multifunctional Cellulose and Cellulose-Based (Nano) Composite Adsorbents

In recent years, faced with the improvement of environmental quality problems, cellulose and cellulose-based (nano) composites have attracted great attention as adsorbents. In this review article, we first report the recent progress of modification and functionalization of cellulose adsorbents. In addition, the adsorbents produced by the modification and functionalization of carboxymehyl cellulose are also introduced. Moreover, the cellulose-based (nano) composites as adsorbents are reviewed in detail. Finally, the development prospect of cellulose and cellulose-based (nano) composites is studied in the field of the environment. In this review article, a critical comment is given based on our knowledge. It is believed that these biomass adsorbents will play an increasingly important role in the field of the environment.

Macroporous chitin microspheres prepared by surfactant micelle swelling strategy for rapid capture of lead (II) from wastewater

Heavy metal pollution of water source continues to be one of the most serious environmental problems which have attracted major global concern. Here, a macroporous chitin microsphere is prepared by surfactant micelle swelling strategy followed by modification with tetraethylenepentamine for Pb²⁺ removal from wastewater. The resultant adsorbent not only exhibits fast adsorption kinetic (>80% of its equilibrium uptake within 20 min) but also has high adsorption capacity of 218.4 ± 6.59 mg/g and excellent reusability (>75% of its initial adsorption capacity after five adsorption/desorption cycles). More importantly, under the continuous operating mode, the adsorbent can treat about 39,000 kg water/kg adsorbent, and the Pb²⁺ concentration decreases from 2000 μg/L to smaller than 10 μg/L, meeting the drinking water standard recommended by the World Health Organization (10 μg/L). All results indicate that the tetraethylenepentamine-modified macroporous chitin microspheres have great potential in the treatment of heavy metal contamination.

Mesoporous cellulose-chitosan composite hydrogel fabricated via the co-dissolution-regeneration process as biosorbent of heavy metals

Developing low-cost and high-performance biosorbent for water purification continues drawing more and more attention. In this study, cellulose-chitosan composite hydrogels were fabricated via a co-dissolution and regeneration process using a molten salt hydrate (a 60 wt% aqueous solution of LiBr) as a solvent. The addition of chitosan not only introduced functionality for metal adsorption but also increased the specific surface area and improved the mechanical strength of the composite hydrogel, compared to pure cellulose hydrogel. Batch adsorption experiments indicated that the composite hydrogel with 37% cellulose and 63% chitosan exhibited an adsorption capacity of 94.3 mg/g (1.49 mmol/g) toward Cu²⁺ at 23 °C, pH 5, and initial metal concentration of 1500 mg/L, which was 10 times greater than the adsorption capacity of pure cellulose hydrogel. Competitive adsorption from a mixed metals solution revealed that the cellulose-chitosan composite hydrogel exhibited selective adsorption of the metals in the order of Cu²⁺ > Zn²⁺ > Co²⁺. This study successfully demonstrated an innovative method to fabricate biosorbents from abundant and renewable natural polymers (cellulose and chitosan) for removing metal ions from water.