Structural basis for the low digestibility of starches recrystallized from side chains of amylopectin modified by amylosucrase to different chain lengths

Properties and functions of acylated starch with short-chain fatty acids: a comprehensive review

Short-chain fatty acids (SCFAs) are the primary energy source of colonic epithelial cells, but oral SCFAs are digested, absorbed, or degraded before reaching the colon. The acylated starch with SCFAs can be fermented and release specific SCFAs under the action of colonic intestinal microbiota. This review first introduces the preparation method, reaction mechanism, and substitution factors. Second, the structure, physical and chemical properties, in vitro function, and mechanism of acylated starch were expounded. Finally, the application of acylated starch in foods is introduced, and its safety is evaluated, providing a basis for the further development of acylated starch-based foods. The acylated starch obtained by different acylation types and preparation methods is different in particle, molecular, and crystal structures, leading to changes in the function and physicochemical properties. Meanwhile, acylated starch has the functional potential of targeted delivery of SCFAs to the colon, which can increase SCFAs in feces and intestine, selectively regulate the intestinal microbiota, and produce a prebiotic effect conducive to host health. The safety of acetylated starch has been supported by relevant studies, which have been widely used in various food fields and have great potential in the food industry.

Changes in physiochemical properties and in vitro digestion of corn starch prepared with heat-moisture treatment

To investigate the effect of heat-moisture treatment (HMT) on the physiochemical properties and in vitro digestibility of corn starch, the pasting behavior, viscoelasticity, thermal properties, long/short range structure, morphology and in vitro digestion of corn starch treated with different HMT conditions (HMT-20, 25, 30, 35 and 40 %) were characterized. Results indicated that after HMT, the pasting and disintegration behaviors of corn starch were affected and correlated with the moisture content. The dynamic viscoelasticity of corn starch was changed, and when glassy conditions were reached, the elastic properties decreased with increasing moisture while the viscous properties increased, especially for the HMT-40 %. The thermal stability of starch was improved by HMT, although the enthalpy of pasting (ΔH) was reduced. Additionally, the HMT processing also promoted the conversion of RDS to SDS and/or RS (SDS and RS increased to 39.80 % and 31.68 % for HMT-40 %, respectively), which might attribute to the rearrangement of free starch molecules. The present work provides a potential approach to make functional starches with healthy properties.

Digestion kinetics and molecular structural evolution during in vitro digestion of green banana (cv. Giant Cavendish) starch nanoparticles

Knowledge of digestion mechanism of starch nanoparticles are crucial for their utilization and potential applications. In this study, molecular structural evolution and digestion kinetics of starch nanoparticles from green banana (GBSNPs) during digestion (0-180 min) was investigated. Distinctive topographic changes of the GBSNPs during digestion with decreased particle size and increased surface roughness were detected. The GBSNPs showed markedly decreased average molecular weight and polydispersity in the initial digestion phase (0-20 min), and these two structural characteristics remained nearly unchanged thereafter. The GBSNPs exhibited a B-type polymorph throughout digestion, while their crystallinity decreased with increasing digestion duration. The infrared spectra revealed that the initial digestion phase led to the increased absorbance ratios 1047/1022 and 1047/1035 cm^-1, reflecting the markedly increased short-range molecular order that was substantiated by the blue-shifting of COH-bending band. Logarithm of slope analysis of digestogram revealed that the GBSNPs were digested by a two-phase process that reflected the surface barrier effect exerted by the increased short-range order. The short-range molecular order strengthening induced from the initial digestion phase was responsible for the increased enzymatic resistance. The results can help to elucidate the gastrointestinal fate of starch nanoparticles for their potential applications as health-promoting ingredients.

Effects of Debranching Conditions and Annealing Treatment on the Formation of Starch Nanoparticles and Their Physicochemical Characteristics

Starch nanoparticles (SNPs) have unique attributes that make them suitable for specific applications. In this study, we assessed the optimum conditions for the fabrication of SNPs from the rice starches of low- (TCSG2) and medium-amylose rice lines (TK11) using pullulanase debranching combined with annealing treatment and evaluated their physicochemical and digestion properties. The highest crystalline SNP percent recoveries of 15.1 and 11.7% were obtained from TK11 and TCSG2, respectively, under the following debranching conditions: 540-630 NPUN/g, pH 5.0, 60 °C, and 12 h. The percent recovery of the crystalline SNPs by the combined modification of the debranching and the annealing treatment with an extended annealing incubation prepared from TK11 and TCSG2 was significantly increased to 25.7 and 23.8%, respectively. The modified starches from TK11 had better percent recovery of the crystalline SNPs than those from TCSG2. They exhibited a higher weight-average molecular weight (Mw) and a broader/bimodal molecular weight distribution with a higher polydispersity (PDI) (Mw = 92.76-92.69 kDa; PDI = 4.4) than those from TCSG2 (Mw = 7.13-7.15 kDa; PDI = 1.7). Compared to the native counterparts, the color analyses showed that the modified starches from TK11 and TCSG2 exhibited decreased brightness (L*)/whiteness index (WI) values with marked color difference values (∆E) ranging between 6.32 and 9.39 and 10.67 and 11.32, respectively, presumably due to the protein corona formed on the surface of SNPs which induced the browning reaction during the treatments. The pasting properties revealed that the modified starches displayed restricted swelling power with extremely low pasting viscosities, reflecting that they were highly thermally stable. The modified starches, especially those treated with an extended annealing incubation, exhibited marked decreases in the rate and extent of digestion and estimated glycemic index due to the honeycomb-like agglomerates comprising an assembly of densely packed SNPs. The results could provide helpful information for the preparation and characterization of the crystalline SNPs for potential applications such as emulsion stabilizers for Pickering emulsion and health-promoting ingredients.

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Resistant starch formation mechanism of amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment

The aim of this study was to reveal the underlying mechanism contributing towards the formation of resistant starch (RS) in amylosucrase-modified starches with crystalline structure enhanced by hydrothermal treatment. The branch chains of waxy corn starch were continuously elongated by amylosucrase, and the retrogradation of elongated starches with weight-average chain length (CL_w¯) of 27.0-37.6 yielded B-type retrograded starches (MSs) with crystallinity increasing from 33.1 % (MS-5) to 41.4 % (MS-30). Increasing the starch crystallinity improved the content of RS from 6.7 % of MS-5 to be as much as 41.0 % of MS-30. During the hydrothermal treatment, MS-5 with CL_w¯ of 27.0 favored the B → A allomorphic transition, leading to the decreased starch digestibility. Moreover, the hydrothermal treatment facilitated the assembly of double helices to increase starch crystallinity, which further increased the content of RS. The findings of the present study may assist the preparation of functional starches with controllable digestibility.

Hydrothermal induced B → A allomorphic transition in retrograded starches with side chains elongated by amylosucrase to different lengths

In this study, chain-elongated starches were modified with hydrothermal treatment to produce hydrothermal-treated starches with different crystalline structures. All chain-elongated starches showed a B-type crystalline structure and the retrogradation of long branch chains accelerated the formation of starch crystallites. The hydrothermal treatment preserved the granular structure of starches but facilitated the rearrangement of starch chains to generate crystallites. Starches with short chain length favored the B → A allomorphic transition during the hydrothermal treatment. A longer chain length of starch led to greater stability of double helices and accordingly inhibited the B → A allomorphic transition, resulting from the hydrogen bonding along with the direction of helix restrained the displacement of the helix. The longer double helices resulted in higher gelatinization temperature of the chain-elongated starches. Moreover, the gelatinization temperature of the starches was further enhanced by the hydrothermal treatment, and both increased crystallinity and B → A allomorphic transition contributed to the improved thermal stability of the hydrothermal-treated starches.

Preparation of Slowly Digested Corn Starch Using Branching Enzyme and Immobilized α-Amylase

The aim of this study was to modify the digestibility and structure of corn starch by treatment with compound enzymes. Corn starch was treated with two enzymes (α-amylase, which catalyzes hydrolysis, and branching enzyme, a transglycosidase that catalyzes branch formation), and the reaction was monitored by determining the content of slowly digestible starch in the reaction product. The fine structure and physical and chemical properties of enzyme-modified starch samples were analyzed using scanning electron microscopy, gel chromatography, and X-ray diffraction methods; modified starch has a high degree of branching, a high proportion of short-chain branched structures, and greatly improved solubility. The results show that the slow digestion performance of corn starch was significantly improved after hydrolysis by α-amylase for 4 h and treatment with branching enzyme for 6 h. These results show that enzymatic modification of corn starch can improve its slow digestibility properties.

Effects of different gelatinization degrees of starch in potato flour on the quality of steamed bread

The effect of four kinds of potato flour with different gelatinization degrees on the quality of steam bread was investigated in the present study. Results showed that medium-well flour (MWF) and potato flakes (PF) steamed bread, particularly MWF steamed bread, possessed the desired product properties liked by consumers. The MWF steamed bread had the highest appearance score (42.78) and total sensory evaluation score (81.60), and the PF steamed bread exhibited the highest specific volume (1.84 mL/g) and taste score (43.05). An increase in the degree of potato flour gelatinization led to an increase in dough gas retention coefficient from 80.20 mL/100 mL to 85.17 mL/100 mL and a more uniform and dense dough microstructure. During dough preparation, the increased gelatinization degree of potato flours enhanced the hydroscopicity competition between potato starch and gluten, resulting in a flocculent gluten network and increased potato starch volume during steaming. During steaming, steamed bread with higher gelatinization degree of potato flour formed a homogenous and dense starch gel-gluten double network, making them softer with more uniform gas cells and larger specific volume. Thus, this study provides a perspective of the effect of starch gelatinization on steamed bread quality.

Physicochemical and volatile characteristics present in different grain layers of various rice cultivars

Five rice cultivars were applied for investigating effect of milling degree on rice physicochemical properties. The first layer had the lowest peak viscosity, followed by the second and third layers, indicating the effect of non-starchy components on starch gelatinization behaviors. Consistently, more content of non-starch components in the first layer led to an enhanced gelatinization temperature. Rheological study demonstrated the G' and G" were successively increased as the layer moved inward, indicating a stronger gel network due to the increased amylose content and crystallinity in the corresponding layer. This is the first study to reveal the second layer has the highest digestibility, suggesting both non-starch components and starch structure control starch digestion. Furthermore, analysis of volatile compounds found alcohols and ketones concentrated in the first layer, whilst compounds including (E,E)-2,4-decadienal, 3-octanone and 3-nonen-2-one only existed in the second layer, serving as an indicator for managing the rice quality during milling.

Effect of high-temperatures and aqueous ethanol treatment on the formation process and properties of V-type Granular Starch (VGS)

Starch-water-ethanol mixtures were heated between 80 and 160 °C. The formation process of V-type granular starch (VGS) was investigated. DSC analysis showed that starch gelatinization was completely inhibited in 70 % ethanol. Microscopic analysis showed that starch remained granular morphology after modification, but when temperature exceeded 110 °C, Maltese cross and A-type crystalline structure disappeared, a V-type crystalline structure developed with increasing temperature, and short-range order of modified starch was reduced. It was indicated that VGS was formed at temperatures exceeding 110 °C in 70 % ethanol. When temperature was increased from 80 to 140 °C, starch cold-water viscosity increased from 17.00 cP to 1932.00 cP. Further temperature increase resulted in decreased cold-water viscosity because of starch degradation. It was found that cold-water viscosity was positively correlated with the crystallinity of V-type starch structure. Ethanol washing before drying made VGS dispersed better, and strengthened V-type crystalline structure, so that ethanol washed VGS had better paste properties.

The Influence of Starch Modification with Amylosucrase Treatment on Morphological Features

Amylosucrase (AS) is a starch-modifying enzyme from Neisseria polysaccharea used to produce low-glycemic starches such as slowly digestible starch (SDS) and resistant starch (RS). The morphology of native, control, and AS-modified waxy corn starches (230 and 460 U) was examined using a particle size analyzer and field-emission scanning electron microscopy (FE-SEM). AS modification of the starch elongated the glucose and resulted in higher SDS and RS contents. The mean particle sizes of the control, 230 U-AS-, and 460 U-AS-treated starches were 56.6 µm, 128.0 µm, and 176.5 μm, respectively. The surface of the 460 U-AS-treated starch was entirely porous and coral-like, while the 230 U-AS-treated starch had a partial dense and flat surface which did not react with AS. FE-SEM of the granule cross section confirmed that the center contained a dense and flat region without any evidence of AS reaction to either of the AS-treated starches. It was assumed that the particle size and porous and sponge-like particle features might be related to the SDS and RS fractions.