Mussel-inspired chitosan modified superhydrophilic and underwater superoleophobic cotton fabric for efficient oil/water separation

Mussel-inspired chitosan and its applications in the biomedical field

Chitosan (CS) has physicochemical properties including solubility, crystallinity, swellability, viscosity, and cohesion, along with biological properties like biocompatibility, biodegradation, antioxidant, antibacterial, and antitumor effects. However, these characteristics of CS are greatly affected by its degree of deacetylation, molecular weight, pH and other factors, which limits the application of CS in biomedicine. The modification of CS with catechol-containing substances inspired by mussels can not only improve these properties of CS, but also endow it with self-healing property, providing an environmentally friendly and sustainable way to promote the application of CS in biomedicine. In this paper, the properties of CS and its limitation in the biomedical filed are introduced in detail. Then, the modification methods and properties of substances with catechol groups inspired by mussels on CS are reviewed. Finally, the applications of modified CS in the biomedical field of wound healing, drug delivery, anticancer therapy, biosensor and 3D printing are further discussed. This review can provide valuable information for the design and exploitation of mussel-inspired CS in the biomedical field.

Intertwisted superhydrophilic and superhydrophobic collagen fibers enabled anti-fouling high-performance separation of emulsion wastewater

Oil-contaminated wastewater has been one of the most concerned environmental issues. Superwetting materials-enabled remediation of oil contamination in wastewater faces the critical challenge of fouling problems due to the formation of intercepted phase. Herein, high-performance separation of emulsions wastewater was accomplished by developing collagen fibers (CFs)-derived water-oil dual-channels that were comprised of intertwisted superhydrophilic and superhydrophobic CFs. The dual-channels relied on the superhydrophilic CFs to accomplish efficient demulsifying, which played the role as water-channel to enable fast transportation of water, while the superhydrophobic CFs served as the oil-transport channel to permit oil transportation. The mutual repellency between water-channel and oil-channel was essential to guarantee the stability of established dual-channels. The unique dual-channel separation mechanism fundamentally resolved the intercepted phase-caused fouling problem frequently engaged by the superwetting materials that provided single-channel separation capability. Long-lasting (1440 min) anti-fouling separations were achieved by the superwetting CFs-derived dual-channels with separation efficiency high up to 99.99%, and more than 4-fold of stable separation flux as compared with that of superhydrophilic CFs with single-channel separation capability. Our investigations demonstrated a novel strategy by using superwetting CFs to develop water-oil dual-channels for achieving high-performance anti-fouling separation of emulsions wastewater. ENVIRONMENTAL IMPLICATION: Industrial processes discard a large amount of emulsion wastewater, which seriously imperils the aquatic ecosystem. This work demonstrated a conceptual-new strategy to achieve effective remediation of emulsion wastewater via the water-oil dual-channels established by the intertwisted superhydrophilic and superhydrophobic collagen fibers (CFs). The superhydrophilic CFs enabled efficient demulsification of emulsions and played the role of water-channel for the rapid transportation of water, while the superhydrophobic CFs worked as oil-channel to permit the efficient transportation of oil pollutants. Consequently, the long-term (1440 min) anti-fouling high-performance separation of emulsion wastewater was achieved.

Bio-Inspired Underwater Superoleophobic Aramid Nanofiber-Based Aerogel Membranes for Highly Efficient Removal of Emulsified Oils and Organic Dyes

Effective elimination of insoluble emulsified oils and soluble organic dyes has received extensively attention in wastewater treatment. In this work, a chitosan and polydopamine @ aramid nanofibers (CS&PDA@ANFs) aerogel membrane was fabricated through an integration methodology consisting of phase inversion and successive deposition of PDA and CS. The as-prepared aerogel membrane possessed a satisfactory three-dimensional interpenetrating network architecture with high porosity and desirable mechanical property. Furthermore, due to the synergistic effect of hydrophilic CS and PDA, the resultant membrane exhibited good superhydrophilicity and underwater superoleophobicity associated with favorable oil resistance/antioil fouling properties. The combination of the interconnected porous structures and super wettability endowed the aerogel membranes with desirable oil-in-water emulsion separation performance. Particularly, an extremely high permeation flux (3729 L/m2/h) and a rejection rate (99.3%) were achieved for the CS&PDA@ANFs membrane. Moreover, diverse dyes could be also adsorbed by the resultant membrane, and the equilibrium adsorption capacity of cationic dye malachite green could reach 36 mg/g, with a high rejection rate over 97%. This study indicated that the CS&PDA@ANFs aerogel membrane held great promise for practical applications in complex wastewater remediation.

Advancements in Detection and Mitigation Strategies for Petroleum-Derived Contaminants in Aquatic Environments: A Comprehensive Review

The exponential increase in the production and transportation of petroleum-derived products observed in recent years has been driven by the escalating demand for energy, textiles, plastic-based materials, and other goods derived from petroleum. Consequently, there has been a corresponding rise in spills of these petroleum derivatives, particularly in water sources utilized for transportation or, occasionally, illegally utilized for tank cleaning or industrial equipment maintenance. Numerous researchers have proposed highly effective techniques for detecting these products, aiming to facilitate their cleanup or containment and thereby minimize environmental pollution. However, many of these techniques rely on the identification of individual compounds, which presents significant drawbacks, including complexity of handling, subjectivity, lengthy analysis times, infeasibility for in situ analysis, and high costs. In response, there has been a notable surge in the utilization of sensors or generalized profiling techniques serving as sensors to generate characteristic fingerprints of these products, thereby circumventing the aforementioned disadvantages. This review comprehensively examines the evolution of techniques employed for detecting petroleum-derived products in water samples, along with their associated advantages and disadvantages. Furthermore, the review examines current perspectives on methods for the removal and/or containment of these products from water sources, to minimize their environmental impact and the associated health repercussions on living organisms and ecosystems.

The antifouling mechanism and application of bio-inspired superwetting surfaces with effective antifouling performance

With the rapid development of industries, the issue of pollution on Earth has become increasingly severe. This has led to the deterioration of various surfaces, rendering them ineffective for their intended purposes. Examples of such surfaces include oil rigs, seawater intakes, and more. A variety of functional surface techniques have been created to address these issues, including superwetting surfaces, antifouling coatings, nano-polymer composite materials, etc. They primarily exploit the membrane's surface properties and hydration layer to improve the antifouling property. In recent years, biomimetic superwetting surfaces with non-toxic and environmental characteristics have garnered massive attention, greatly aiding in solving the problem of pollution. In this work, a detailed presentation of antifouling superwetting materials was made, including superhydrophobic surface, superhydrophilic surface, and superhydrophilic/underwater superoleophobic surface, along with the antifouling mechanisms. Then, the applications of the superwetting antifouling materials in antifouling domain were addressed in depth.

Superhydrophilic and oleophobic sponges prepared based on Mussel-Inspired chemistry for efficient oil-water separation

Superhydrophilic/oleophobic materials are considered to be the best materials for achieving oil-water separation, but their preparation is difficult and the existing methods are not universal. In this paper, a two-step modification strategy was used to prepare superhydrophilic/oleophobic sponges by adjusting the polar and nonpolar components of the materials using mussel-inspired chemistry. While remaining superhydrophilic, the modified sponge surface has a maximum contact angle of 135° with different oils in air. The modified sponge exhibited superoleophobicity in water, and the contact angle of oil could reach more than 150°. In addition, the modified sponges were also reusable, chemically stable, and mechanically durable. Its oil-water separation flux was up to 24900 Lm-2  h-1  bar-1 , and the separation efficiency was above 97 %. We believe that this method will provide an environmentally friendly and efficient way to prepare the superhydrophilic/oleophobic materials.

Fully biobased hydrogel based on chitosan and tannic acid coated cotton fabric for underwater superoleophobicity and efficient oil/water separation

Underwater superoleophobic (UWSO) materials have garnered significant attention in separating oil/water mixtures. But, the majority of these materials are made from non-degradable and non-renewable raw materials, polluting the environment and wasting scarce resources while using them. Against this backdrop, this study aimed to fabricate an environmental-friendly UWSO textile using biobased materials. To achieve this, hydrogel consisting of chitosan (CS) and poly(tannic acid) (PTA) were formed and coated on cotton fabric (CTF) via dip-coating followed by oxidative polymerization. CS&PTA hydrogel endowed the CTF with a rough surface and high surface energy, leading to an UWSO CTF with an underwater oil contact angle as high as 166.84°. The CS&PTA/CTF had excellent separation capability toward various oil/water mixtures, showing separation efficiency above 99.84 % and water flux higher than 23, 999 L m-2 h-1. Moreover, CS&PTA/CTF possessed excellent mechanical and environmental stability with underwater superoleophobicity unchanged after sandpaper friction, ultrasonication, organic solvents, NaCl (m/v, 30 %) solution, and acid/base solution immersion, due to the strong interaction between the hydrogel and cotton fabric generated by the mussel-inspired adhesion owing to the presence of PTA. The fully biobased UWSO CTF exhibits great promising to be an alternative to traditional superwetting materials for separation of oil/water mixtures.

Clay-Coated Meshes with Superhydrophilicity and Underwater Superoleophobicity for Highly Efficient Oil/Water Separation

A novel clay-coated mesh was fabricated via a simple brush-coating method without the use of special equipment, chemical reagents, and complex chemical reactions and operation processes. Possessing superhydrophilicity and underwater superoleophobicity, the clay-coated mesh can be used for efficiently separating various light oil/water mixtures. The clay-coated mesh also exhibits excellent reusability, maintaining a high separation efficiency of 99.4% after 30 repeated separations of the kerosene/water mixture.

Highly compressible and hydrophobic nanofibrillated cellulose aerogels for cyclic oil/water separation

Nanofibrillated cellulose (NFC)-based aerogels are ideal oil-sorbent materials, but the poor structural stability and hydrophilicity restrain their practical applications in the fields of oil/water separation. In the present work, we report a facile strategy for constructing a hydrophobic nanofibrillated cellulose aerogel for cyclic oil/water separation. Briefly, an aerogel matrix of C-g-PEI with multiple cross-linked network structures was constructed via the combined use of oxidized-NFC (ONC), polyethyleneimine (PEI), and ethylene glycol diglycidyl ether (EGDE), followed by rapid in situ deposition of poly(methyl trichlorosilane) (PMTS) through a low-temperature gas-solid reaction. The resulting ONC-based aerogel (C-g-PEI-PMTS) exhibits the advantages of ultralight (53.80 mg/cm³), high porosity (95.73 %), hydrophobicity (contact angle of 130.0°) and remarkable elasticity (95.86 %). Meanwhile, the composite aerogel of C-g-PEI-PMTS is extremely suitable for oil sorption-desorption by a simple mechanical squeezing method. After 10 cycles of sorption-desorption, the sorption capacity of the aerogel towards various oils reached almost the same level as in the first cycle. The filtration separation efficiency for the trichloromethane-water mixtures remained at 99 % after 50 cycles, demonstrating encouraging reusability. In summary, an efficient strategy to prepare NFC-based aerogel with highly compressible and hydrophobic properties is developed, which expands the applications of NFC in the fields of oil/water separation.

Spray-assisted LBL assembly of chitosan/nanocellulose as coatings of commercial membranes for oil-in-water emulsion separation

Owing to the limitation of their wettability and pore size, lab filter membrane could not separate oil/water emulsions. Herein, we present surface modification of commercial membranes with chitosan/nanocellulose coatings via a spray-assisted layer-by-layer (LBL) assembly technology. By alternate spraying chitosan (CS) solution and TEMPO-oxidized tunicate cellulose nanofiber (TCNF) suspension, (CS/TCNF)_n multilayers were obtained, where n denotes the number of bilayers. The (CS/TCNF)₆ coated membrane possessed superhydrophilicity, underwater superoleophobicity, and outperforming anti-oil-fouling properties, which could effectively separate various oil-in-water emulsions. Importantly, the (CS/TCNF)₆ coated membrane not only had stable permeate flux with nearly 100 % recovery ratio for the separation of pump oil-in-water emulsion, but also exhibited good harsh-environment-tolerant property. This work provided a novel strategy for designing and preparing stable anti-oil-fouling membranes for oily wastewater treatment.

Zero-Material Cost Production of Soil-Coated Fabrics with Underwater Superoleophobicity for Antifouling Oil/Water Separation

Soil-coated fabrics were fabricated by scrape-coating of soil slurry onto cotton fabrics. The raw materials, soil, and cotton fabrics were, respectively, obtained from farmland and waste bed sheets, making the method a zero-material cost way to produce superwetting membrane. The superhydrophilic/underwater superoleophobic soil-coated fabrics exhibit high efficiency (>99%), ultra-high flux (~45,000 L m^-2 h^-1), and excellent antifouling behavior for separating water from various oils driven by gravity. The simple fabrication and superior performance suggest that the soil-coated fabric could be a promising candidate as a filtration membrane for practical applications in industrial oily wastewater and oil spill treatments.

A review on the effectiveness of nanocomposites for the treatment and recovery of oil spill

The introduction of unintended oil spills into the marine ecosystem has a significant impact on aquatic life and raises important environmental concerns. The present review summarizes the recent studies where nanocomposites are applied to treat oil spills. The review deals with the techniques used to fabricate nanocomposites and identify the characteristics of nanocomposites beneficial for efficient recovery and treatment of oil spills. It classifies the nanocomposites into four categories, namely bio-based materials, polymeric materials, inorganic-inorganic nanocomposites, and carbon-based nanocomposites, and provides an insight into understanding the interactions of these nanocomposites with different types of oils. Among nanocomposites, bio-based nanocomposites are the most cost-effective and environmentally friendly. The grafting or modification of magnetic nanoparticles with polymers or other organic materials is preferred to avoid oxidation in wet conditions. The method of synthesizing magnetic nanocomposites and functionalization polymer is essential as it influences saturation magnetization. Notably, the inorganic polymer-based nanocomposite is very less developed and studied for oil spill treatment. Also, the review covers some practical considerations for treating oil spills with nanocomposites. Finally, some aspects of future developments are discussed. The terms "Environmentally friendly," "cost-effective," and "low cost" are often used, but most of the studies lack a critical analysis of the cost and environmental damage caused by chemical alteration techniques. However, the oil and gas industry will considerably benefit from the stimulation of ideas and scientific discoveries in this field.

Thermal and magnetic dual-responsive switchable device with superhydrophilicity/underwater superoleophobicity and excellent targeted oil–water separation performance

In view of the increasingly serious problem of oil–water separation, it is a convenient and practical method to introduce a hydrogel coating on the surface of materials to make super-wetting materials. Nowadays, researchers of super-wetting materials pay more attention to the research and development of responsive materials. Here, a thermal and magnetic dual-responsive superhydrophilicity/underwater superoleophobicity switchable device (Fe3O4@PNIPAM-Cu) was simply fabricated using the Fe3O4 nanoparticles, poly-N-isopropylacrylamide (PNIPAM) hydrogel as the functional coating and copper foam as the skeleton through a one-step solution immersion method. The separation efficiency of the benzene-water mixture of this dual-responsive device can reach up to 99.98%. Even after 10 separation cycles, it maintained an efficiency of more than 99.90%. At temperatures above ~34°C, the device can stop oil–water separation. The experiments presented here demonstrate this dual-responsive device possesses excellent superhydrophilicity/underwater superoleophobicity, thermal-responsive property and magnetic navigation function.

Recent advances in eco-friendly fabrics with special wettability for oil/water separation

Considering the serious damage to aquatic ecosystems and marine life caused by oil spills and oily wastewater discharge, efficient, environment-friendly and sustainable oil/water separation technology has become an inevitable trend for current development. Herein, fabrics are recognized as eco-friendly materials for water treatment due to their good degradability and low cost. Particularly, fabrics with rough structures and natural hydrophilicity/oleophilicity enable the construction of superwetting surfaces for the selective separation of oil/water mixtures and even complex emulsions. Therefore, superwetting fabrics for efficiently solving oil spills and purifying oily wastewater have received extensive attention. Especially, Janus and smart fabrics are highly anticipated to enable the on-demand and sustainable treatment of oil spills and oily wastewater due to their changeable wettability. Moreover, the fabrication of superwetting fabrics with multifunctional performances for oily wastewater purification can further promote their practical industrial applications, such as photocatalytic, self-cleaning, and self-healing characteristics. However, some potential challenges still exist, which urgently need to be systematically summarized to guide the future development of this research field. In this review, firstly, the fundamental theories of wettability and the separation mechanisms based on special wettability are discussed. Then, superwetting fabrics for efficient oil/water separation are systematically reviewed, such as superhydrophobic/superoleophilic (SHB/SOL), superhydrophilic/superoleophobic (SHL/SOB), SHL/underwater superoleophobic (SHL/UWSOB), and UWSOB/underoil superoleophobic (UWSOB/UOSHB) fabrics. Most importantly, we highlight Janus, smart, and multifunctional fabrics based on their superwetting property. Correspondingly, the advantages and disadvantages of each superwetting fabric are comprehensively analyzed. Besides, super-antiwetting fabrics with superhydrophobic/superoleophobic (SHB/SOB) property are also introduced. Finally, the challenges and future research directions are explained.

Modified cotton fabric based on thiolene click reaction and its oil/water separation application

A cotton fabric with special wettability was prepared in two simple steps. The surface of the fabric was grafted with silicon-oxygen group using 3-(methacryloyloxy) propyl trimethoxysilane (MSPMA) as the reagent, and then (3-mercaptopropyl)triethoxysilane (MPTES) was used to react with the grafted fabric under ultraviolet light according to the principle of thiolene reaction. Meanwhile, the modified cotton fabrics with various pore sizes were obtained via modifying the cotton fabric with different pore size under the same experimental conditions. The as-prepared fabric had a better hydrophobic and lipophilic effect, whose water contact angle could be up to 146.7° and the separation efficiency for different kinds of oil/water mixtures was better than 94%. In addition, the pore sizes of cotton fabrics had a great effect on the rate of oil/water separation, which increased with the increase of the pore size.

Cellulose/Poly(vinyl alcohol)/Tannic Acid Porous Cross-Linked Composite Frame Materials with Excellent Oil/Water Separation Performance

Problems such as increasingly serious water pollution attracted widespread concern. The underwater OCAs of the samples became larger with increasing pH and the under-oil WCAs of the samples did not vary regularly with increasing pH. Nanoneedle structures were grown on metal foam by anodization. Cellulose is fixed to the frame by cross-linking with supramolecular binder poly(vinyl alcohol)/tannin. A cellulose/poly(vinyl alcohol)/tannin porous composite framework with special wettability is prepared. This porous composite framework can be used for the continuous separation of oil/water mixtures with high separation efficiency, high throughput, excellent reusability, and mechanical durability. In addition, due to the coating of cellulose and the supramolecular binder, the pore size of the frame is reduced, and the cagelike structure of the porous framework can promote its demulsification effect. Therefore, the cellulose/poly(vinyl alcohol)/tannic acid porous composite frame can also be used for the separation of oil/water emulsions. This porous frame material has broad application prospects in oil spill treatment and sewage purification.

Tolerant chitosan/carboxymethyl cellulose@calcium composite films on nylon fabric for high-flux water/oil separation

Nacre as a natural organic-inorganic composite has outstanding mechanical toughness and oil repellency. Enlightened by nacre, we present here a novel strategy to fabricate superhydrophilic/underwater superoleophobic hybrid films on nylon fabric (NF). The hybrid films were constructed via facile and green layer-by-layer (LbL) assembly of calcium ion (Ca²⁺), chitosan (CS), and carboxymethyl cellulose (CMC) combined with biomimetic mineralization in CO₂ atmosphere. The resulting NF exhibits excellent superoleophobicity underwater, anti-oil-fouling ability, and stability. Under the drive of gravity, the deposited fabric can selectively remove pure and corrosive water from various oil-containing water with preferable separation efficiencies, great water flux (>6903 L·m^-2·h^-1), favorable oil penetration pressure (1.47 kPa), and outstanding recyclability. Especially, the NF can still sustain high underwater oleophobicity after repeatedly separating oil/corrosive water for 80 times. The green preparation process, eco-friendly and durable coating, and good separation performance allow the as-fabricated NF to be applied in oily wastewater treatment.

Superhydrophilic Modification of Polyvinylidene Fluoride Membrane via a Highly Compatible Covalent Organic Framework-COOH/Dopamine-Integrated Hierarchical Assembly Strategy for Oil-Water Separation

The integration of membranes with additives such as functionalized nanomaterials can be recognized as an effective method to enhance membrane performance. However, to obtain an efficient nanoparticle-decorated membrane, the compatibility of nanomaterials remains a challenge. Hydrophilic carboxylated covalent organic frameworks (COF-COOH) might be expected to avoid the drawbacks of aggregation and easy shedding of inorganic materials caused by the poor interfacial compatibility. Herein, a highly compatible dip-coating strategy was proposed for the superhydrophilic modification of polyvinylidene fluoride membrane via COF-COOH integrated with dopamine. COF-COOH together with polydopamine nanoparticles were uniformly and stably attached to the membrane due to the high interfacial compatibility, constructing a coating with rough hierarchical nanostructures and abundant carboxyl groups. The synergistic effects of multiscale structures and chemical groups endow the membrane with superhydrophilicity and underwater superoleophobicity, the water contact angle decreased from 123 to 15°, and the underwater oil contact angle increased from 132 to 162°. Accordingly, the modified membrane exhibits an ultrahigh oil rejection ratio (>98%), a high flux (the maximum reaches 1843.48 L m^-2 h^-1 bar^-1), attractive antifouling ability, and impregnable stability. This work would provide a momentous reference for the application of COF-COOH in practical oily wastewater treatment.

Polyester fabrics coated with cupric hydroxide and cellulose for the treatment of kitchen oily wastewater

In recent years, kitchen oily wastewater has received much attention because of its harmful effects on the ecological environment. Therefore, separation of oil from kitchen oily wastewater has become an urgent issue. In this study, this problem could be solved using polyester fabrics covered with cupric hydroxide and cellulose. The functional fabric was obtained by the dipping-rolling-drying process which is an easy and practical way to prepare the fabric and could improve the hydrophilicity of polyester. The functional polyester fabric could separate oil/water mixtures completely under the force of gravity with a high water flux of 2079 L m^-2 h^-1-3620 L m^-2 h^-1 and high separation efficiency of 99.6%. Because kitchen oily wastewater contains floating oil and emulsified oil, we also tested the separation of oil-in-water emulsions. The functional polyester fabric could successfully separate the emulsions with the water flux of 1210 L m^-2 h^-1-2018 L m^-2 h^-1 and a separation efficiency of 99.0%. Moreover, the water flux and separation efficiency of functional polyester fabric remained unchanged after the immersion in salt, alkali, and acid solutions, indicating that the functional polyester fabric exhibited commendable environmental stability. The oil in Chongqing Street Noodles soup with a high oil content was separated to simulate real-life oil/water separation, confirming that the functional polyester fabric could be applied to the treatment of kitchen oily wastewater.

Mechanically Tough and Regenerable Antibacterial Nanofibrillated Cellulose-Based Aerogels for Oil/Water Separation

Nanofibrillated cellulose (NFC)-based aerogels have been widely used for various applications. However, the disadvantages of poor structural stability, low mechanical toughness, and easy contamination by bacteria hinder their large-scale application. In this work, 3-(3'-acrylicacidpropylester)-5,5-dimethyl hydantoin (APDMH) was grafted on oxidized NFC (ONC) to prepare antibacterial poly(APDMH)-g-ONC (PAC). PAC and poly(ethyleneimine) (PEI) were chemically cross-linked using 3-glycidoxypropyltrimethox (GPTMS), aiming at constructing a PAC-g-PEI aerogel with multiple network structures. The mechanical behaviors of composite aerogel and oil/water separation performances under different conditions were investigated. PAC-g-PEI aerogel exhibits outstanding fatigue resistance (>50 cycles of compression) and superior elasticity (96.76% height recovery after five compression-release cycles at 50% strain). The obtained superhydrophilic and underwater-oleophobic properties endow the aerogel with excellent oil/water separation performances, achieving a satisfactory separation efficiency of over 99% and flux of over 9500 L·m^-2·h^-1. Furthermore, the chlorinated aerogel of PAC-g-PEI-Cl shows highly efficient and rechargeable antibacterial properties, can inactivate 6.72-log Escherichia coli and 6.60-log Staphylococcus aureus within 10 min, and can still kill all inoculated bacteria after 50 cycles. In addition, PAC-g-PEI-Cl aerogel can inhibit biofilm formation, making it a promising candidate for highly efficient oil/water separation applications in diverse harsh conditions.

Superhydrophilic and Underwater Superoleophobic Cotton Fabric for Oil-Water Separation and Removal of Heavy-Metal Ion

Superhydrophilic and underwater superoleophobic cotton fabric (named CS-CF-PDA, or m-CF) was prepared by modifying the cotton fabric (CF) with dopamine (DA) and chitosan (CS). The oil-water separation and heavy-metal ion (e.g., Cu(II)) adsorption performances of m-CF were investigated, and m-CF was characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared (FT-IR), and thermogravimetric analysis (TGA). The results showed that the underwater oil contact angle (UWOCA) of m-CF was more than 156°. The m-CF was used to treat artificial oily wastewater containing Cu(II) under room temperature and atmospheric pressure and gravity, by which the separation efficiency, water flux, and Cu(II) removal rate could reach 99%, 17 400 L·m^-2·h^-1, and 89%, respectively. Additionally, in the process of continuous treatment of oily wastewater, the water flux slightly decreased; on the contrary, the Cu(II) removal rate decreased significantly to 67% within 120 s. Cu(II) was one of the reasons for the decrease of water flux. The m-CF of adsorbed Cu(II) could be leached with HCl (0.1 mol·L^-1) solution, and the Cu(II) desorption rate could reach over 95% within 120 s. After strong acid, strong alkali, high salt, and abrasion treatment, the UWOCAs of m-CF were still higher than 150°. In a word, in terms of oil-water separation, m-CF exhibited good acid, alkali, salt, and abrasion resistances. Also, it is an underwater superoleophobic material involving simple preparation, low cost, and environmental friendliness, which could remove the floating oil and heavy-metal ions from wastewater and has good industrial application prospects.

Asymmetric Robust Superhydrophobic/Superhydrophilic Janus Membranes for the Moisture Proofing of Oil and Purification of Water

The performance degradation of oil caused by moisture and water pollution induced by the infiltration of oil can result in huge losses for society. This is especially true of stable emulsified mixtures of oil and water, which are difficult to separate and urgently require a processing method. In this work, a robust Janus membrane prepared by combining simple electrodeposition and spraying processes was used to separate water-in-transformer oil/lubricating oil emulsions and various oil-in-water emulsions. The membrane with outstanding separation efficiency was also endowed high flux to emulsions, even after 10 separation cycles and 100 sand impact tests, indicating that separation ability was retained. Furthermore, the excellent resistance to acidic and alkaline liquids of the superhydrophobic side groups of the membrane increased the possibility of its service in harsh environments. This study's findings reveal great potential regarding the expansion and application of oil-water separation materials.

Simple Method for the Fabrication of Multiple Superwetting Surfaces with Photoresponse

There have been many studies on special wetting surfaces, but most of them just stay superlyophobic in air or underwater. In this work, a membrane with photoresponse is fabricated by spraying hybrid particles of silicon and titanium dioxide. Under the combined action of hybrid particles and 1H,1H,2H,2H-perfluorodecyltrimethoxysilane, the prepared membrane is superhydrophobic in air. Because of the presence of titanium dioxide, the membrane can realize the transformation from superoleophilic underwater to superoleophobic underwater through UV irradiation and heating. Surprisingly, the membranes with superoleophobicity underwater are also superhydrophobic underoil. Thanks to this unique wettability transition, the prepared membrane can be applied to emulsion separation and fog harvesting. This is inspiring for the preparation and the multifunctional application of multiphase media superlyophobic surfaces.

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

Recent developments in the application of lignocellulosic materials for oil spill removal are discussed in this review article. The types of lignocellulosic substrate material and their different chemical and physical modification strategies and basic preparation techniques are presented. The morphological features and the related separation mechanisms of the materials are summarized. The material types were classified into 3D-materials such as hydrophobic and oleophobic sponges and aerogels, or 2D-materials such as membranes, fabrics, films, and meshes. It was found that, particularly for 3D-materials, there is a clear correlation between the material properties, mainly porosity and density, and their absorption performance. Furthermore, it was shown that nanocellulosic precursors are not exclusively suitable to achieve competitive porosity and therefore absorption performance, but also bulk cellulose materials. This finding could lead to developments in cost- and energy-efficient production processes of future lignocellulosic oil spillage removal materials.

Cellulose-based special wetting materials for oil/water separation: A review

Oil spill accidents and oily wastewater discharged by petrochemical industries have severely wasted water resources and damaged the environment. The use of special wetting materials to separate oil and water is efficient and environment-friendly. Cellulose is the most abundant renewable resource and has natural advantages in removing pollutants from oily wastewater. The application and modification of cellulose as special wetting materials have attracted considerable research attention. Therefore, we summarized cellulose-based superlipophilic/superhydrophobic and superhydrophilic/superoleophobic materials exhibiting special wetting properties for oil/water separation. The treatment mechanism, preparation technology, treatment effect, and representative projects of oil-bearing wastewater are discussed. Moreover, cellulose-based intelligent-responsive materials for application to oil/water separation and the removal of other pollutants from oily wastewater have also been summarized. The prospects and potential challenges of all the materials have been highlighted.

Synthesis of Si-Based High-Efficiency and High-Durability Superhydrophilic-Underwater Superoleophobic Membrane of Oil-Water Separation

Oil pollution is caused by the frequent discharge of contaminated industrial wastewater and accidental oil spills and is a severe environmental and health concern. Therefore, efficient materials and processes for effective oil–water separation are being developed. Herein, SiO₂-Na₂SiO₃-coated stainless steel fibers (SSF) with underwater superoleophobic and low-adhesion properties were successfully prepared via a one-step hydrothermal process. The modified surfaces were characterized with scanning electron microscopy (SEM), and contact angle measurements to observe the surface morphology, confirm the successful incorporation of SiO₂, and evaluate the wettability, as well as with X-ray diffraction (XRD). The results revealed that SiO₂ nanoparticles were successfully grown on the stainless-steel fiber surface through the facile hydrothermal synthesis, and the formation of sodium silicate was detected with XRD. The SiO₂-Na₂SiO₃-coated SSF surface exhibited superior underwater superoleophobic properties (153–162°), super-hydrophilicity and high separation efficiency for dichloromethane–water, n-hexane–water, tetrachloromethane–water, paroline–water, and hexadecane–water mixtures. In addition, the as-prepared SiO₂-Na₂SiO₃-coated SSF demonstrated superior wear resistance, long-term stability, and re-usability. We suggest that the improved durability may be due to the presence of sodium silicate that enhanced the membrane strength. The SiO₂-Na₂SiO₃-coated SSF also exhibited desirable corrosion resistance in salty and acidic environments; however, further optimization is needed for their use in basic media. The current study presents a novel approach to fabricate high-performance oil–water separation membranes.

Durable, magnetic-responsive melamine sponge composite for high efficiency,in situoil-water separation

The development of durable and high-performance absorbents forin situoil-water separation is of critical importance for addressing severe water pollution in daily life as well as for solving accidental large-scale oil spillages. Herein, we demonstrate a simple and scalable approach to fabricate magnetic-responsive superhydrophobic melamine sponges byin situdeposition of PDA coatings and Fe₃O₄nanoparticles, followed by surface silanization with low surface energy 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PTOS) layer. The prepared melamine sponge composite (PTOS-Fe₃O₄@PDA/MF) not only exhibits a very high water contact angle of 165 ± 1.5° and an excellent ability to uptake a variety of oils and organic solvents (e.g. up to 141.1 g/g for chloroform), but also shows robust durability and superior recyclability. The PTOS-Fe₃O₄@PDA/MF sponge can also efficiently separate oils (or organic solvents) and water, as demonstrated by different model systems including immiscible oil-water solution mixture and miscible water-oil (W/O) emulsion (stabilized by surfactants). Furthermore, the PTOS-Fe₃O₄@PDA/MF sponge is able toin siturecover organics from water using a peristaltic pump, which gives it significant advantages over other traditional batch processes for oil-water separation. We believe that the PTOS-Fe₃O₄@PDA/MF sponge provides a very promising material solution to address oil-water separation, especially for the large-scale problems that have been long-time challenges with conventional sorption methods.

Fabrication of durable superhydrophobic/oleophilic cotton fabric for highly efficient oil/water separation

In the present work, dopamine is self-polymerized on cotton fabric by a simple deep-coating method and followed by modification with an ethanolic solution of palmitic acid: a superhydrophobic/oleophilic cotton fabric was obtained. The as-prepared cotton fabric exhibits a superhydrophobic character with a water contact angle of 157^o. The absorption capacity of as-prepared superhydrophobic/oleophilic cotton fabric in n-hexane, petroleum ether, and silicone oil was determined. The results show that silicone oil has the highest absorption capacity while n-hexane has the lowest value. The absorption capacity is nearly constant even after ten cycles, indicating the efficient recyclability of the as-prepared superhydrophobic/oleophilic cotton fabric for oil separation. The as-prepared superhydrophobic/oleophilic cotton fabric shows excellent separation efficiency, high flux rate, and excellent chemical and mechanical stability.

Facile preparation of cotton fabric with superhydrophilicity–oleophobicity in air and superoleophobicity under water by using branched polyethyleneimine/perfluorooctanoic acid composites

Preparation of cotton fabric with superhydrophilicity-oleophobicity in the air and superoleophobicity under water by using branched polyethyleneimine/perfluorooctanoic acid composites and its application in gravity-controlled oil-water separation.