1
|
Paganelli S, Massimi N, Di Michele A, Piccolo O, Rampazzo R, Facchin M, Beghetto V. Use of carboxymethyl cellulose as binder for the production of water-soluble catalysts. Int J Biol Macromol 2024; 270:132541. [PMID: 38777012 DOI: 10.1016/j.ijbiomac.2024.132541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/28/2023] [Revised: 02/09/2024] [Accepted: 05/19/2024] [Indexed: 05/25/2024]
Abstract
Bio-based polymers are materials of high interest given the harmful environmental impact that involves the use of non-biodegradable fossil products for industrial applications. These materials are also particularly interesting as bio-based ligands for the preparation of metal nanoparticles (MNPs), employed as catalysts for the synthesis of high value chemicals. In the present study, Ru (0) and Rh(0) Metal Nanoparticles supported on Sodium Carboxymethyl cellulose (MNP(0)s-CMCNa) were prepared by simply mixing RhCl3x3H2O or RuCl3 with an aqueous solution of CMCNa, followed by NaBH4 reduction. The formation of MNP(0)s-CMCNa was confirmed by FT-IR and XRD, and their size estimated to be around 1.5 and 2.2 nm by TEM analysis. MNP(0)s-CMCNa were employed for the hydrogenation of (E)-cinnamic aldehyde, furfural and levulinic acid. Hydrogenation experiments revealed that CMCNa is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles allowing to obtain high conversions (>90 %) and selectivities (>98 %) with all substrates tested. Easy recovery by liquid/liquid extraction allowed to separate the catalyst from the reaction products, and recycling experiments demonstrated that MNPs-CS were highly efficiency up to three times in best hydrogenation conditions.
Collapse
Affiliation(s)
- Stefano Paganelli
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), Via C. Ulpiani 27, 70126 Bari, Italy.
| | - Nicola Massimi
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172 Mestre, Italy
| | - Alessandro Di Michele
- Università degli Studi di Perugia, Dipartimento Fisica e Geologia, Via Pascoli, 06123 Perugia, Italy
| | - Oreste Piccolo
- Studio di Consulenza Scientifica (SCSOP), Via Bornò 5, 23896 Sirtori, LC, Italy
| | - Rachele Rampazzo
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172 Mestre, Italy
| | - Manuela Facchin
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172 Mestre, Italy
| | - Valentina Beghetto
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), Via C. Ulpiani 27, 70126 Bari, Italy; Crossing S.r.l., Viale della Repubblica 193/b, 31100 Treviso, Italy.
| |
Collapse
|
2
|
Paganelli S, Brugnera E, Di Michele A, Facchin M, Beghetto V. Chitosan as a Bio-Based Ligand for the Production of Hydrogenation Catalysts. Molecules 2024; 29:2083. [PMID: 38731574 PMCID: PMC11085195 DOI: 10.3390/molecules29092083] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2024] [Revised: 04/24/2024] [Accepted: 04/26/2024] [Indexed: 05/13/2024] Open
Abstract
Bio-based polymers are attracting increasing interest as alternatives to harmful and environmentally concerning non-biodegradable fossil-based products. In particular, bio-based polymers may be employed as ligands for the preparation of metal nanoparticles (M(0)NPs). In this study, chitosan (CS) was used for the stabilization of Ru(0) and Rh(0) metal nanoparticles (MNPs), prepared by simply mixing RhCl3 × 3H2O or RuCl3 with an aqueous solution of CS, followed by NaBH4 reduction. The formation of M(0)NPs-CS was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Analysis (EDX), Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD). Their size was estimated to be below 40 nm for Rh(0)-CS and 10nm for Ru(0)-CS by SEM analysis. M(0)NPs-CS were employed for the hydrogenation of (E)-cinnamic aldehyde and levulinic acid. Easy recovery by liquid-liquid extraction made it possible to separate the catalyst from the reaction products. Recycling experiments demonstrated that M(0)NPs-CS were highly efficient up to four times in the best hydrogenation conditions. The data found in this study show that CS is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles, allowing the production of some of the most efficient, selective and recyclable hydrogenation catalysts known in the literature.
Collapse
Affiliation(s)
- Stefano Paganelli
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (E.B.); (M.F.)
- Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), Via C. Ulpiani 27, 70126 Bari, Italy
| | - Eleonora Brugnera
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (E.B.); (M.F.)
| | - Alessandro Di Michele
- Dipartimento Fisica e Geologia, Università degli Studi di Perugia, Via Pascoli, 06123 Perugia, Italy;
| | - Manuela Facchin
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (E.B.); (M.F.)
| | - Valentina Beghetto
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (E.B.); (M.F.)
- Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), Via C. Ulpiani 27, 70126 Bari, Italy
- Crossing S.R.L., Viale della Repubblica 193/b, 31100 Treviso, Italy
| |
Collapse
|
3
|
Facchin M, Gatto V, Samiolo R, Conca S, Santandrea D, Beghetto V. May 1,3,5-Triazine derivatives be the future of leather tanning? A critical review. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2024; 345:123472. [PMID: 38320686 DOI: 10.1016/j.envpol.2024.123472] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Revised: 01/03/2024] [Accepted: 01/30/2024] [Indexed: 02/13/2024]
Abstract
Leather is produced by a multi-step process among which the tanning phase is the most relevant, transforming animal skin collagen into a stable, non-putrescible material used to produce a variety of different goods, for the footwear, automotive, garments, and sports industry. Most of the leather produced today is tanned with chromium (III) salts or alternatively with aldehydes or synthetic tannins, generating high environmental concern. Over the years, high exhaustion tanning systems have been developed to reduce the environmental impact of chromium salts, which nevertheless do not avoid the use of metals. Chrome-free alternatives such as aldehydes and phenol based synthetic tannins, are suffering from Reach restrictions due to their toxicity. Thus, the need for environmentally benign and economically sustainable tanning agents is increasingly urgent. In this review, the synthesis, use and tanning mechanism of a new class of tanning agents, 1,3,5-triazines derivatives, have been reported together with organoleptic, physical mechanical characteristics of tanned leather produced. Additionally environmental performance and economic data available for 1,3,5-triazines have been compared with those of a standard basic chromium sulphate tanning process, evidencing the high potentiality for sustainable, metal, aldehyde, and phenol free leather manufacturing.
Collapse
Affiliation(s)
- Manuela Facchin
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172, Mestre, Italy
| | - Vanessa Gatto
- Crossing S.r.l., Viale della Repubblica 193/b, 31100, Treviso, Italy
| | - Riccardo Samiolo
- Crossing S.r.l., Viale della Repubblica 193/b, 31100, Treviso, Italy
| | - Silvia Conca
- Crossing S.r.l., Viale della Repubblica 193/b, 31100, Treviso, Italy
| | - Domenico Santandrea
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172, Mestre, Italy
| | - Valentina Beghetto
- Department of Molecular Sciences and Nanosystems, University Ca' Foscari of Venice, Via Torino 155, 30172, Mestre, Italy; Crossing S.r.l., Viale della Repubblica 193/b, 31100, Treviso, Italy; Consorzio Interuniversitario per le Reattività Chimiche e La Catalisi (CIRCC), Via C. Ulpiani 27, 70126, Bari, Italy.
| |
Collapse
|
4
|
Lyu J, Chen H, Luo J, Lin S, Yang G, Zhou M, Tao J. Shape memory and hemostatic silk-laponite scaffold for alveolar bone regeneration after tooth extraction trauma. Int J Biol Macromol 2024; 260:129454. [PMID: 38237836 DOI: 10.1016/j.ijbiomac.2024.129454] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2023] [Revised: 01/08/2024] [Accepted: 01/10/2024] [Indexed: 01/28/2024]
Abstract
Persistent bleeding and the absence of alveolar bone stress following tooth loss can hinder socket healing, complicating future dental implant procedures, and potentially leading to neighboring tooth instability. Therefore, developing materials that promote alveolar bone regeneration and possess both hemostatic and osteogenic properties is crucial for preserving the extraction sites. This study introduces a silk-based laponite composite scaffold material with proficient hemostatic and osteogenic functions, and excellent shape-memory properties for efficient extraction- site filling. In vitro studies research demonstrated that the scaffold's inherent negative charge of the scaffold significantly enhanced blood coagulation and thrombin generation. Moreover, its porous structure and slightly rough inner surface promoted blood cell adhesion and, improved the hemostatic performance. Furthermore, the scaffold facilitated stem cell osteogenic differentiation by activating the TRPM7 channel through the released of magnesium ions. In vivo tests using rat models confirmed its effectiveness in promoting coagulation and mandibular regeneration. Thus, this study proposes a promising approach for post-extraction alveolar bone regenerative repair. The composite scaffold material, with its hemostatic and osteogenic capabilities and shape-memory features, can potentially enhance dental implant success and overall oral health.
Collapse
Affiliation(s)
- Jiaxuan Lyu
- Department of General Dentistry, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Research Unit of Oral and Maxillofacial Regenerative Medicine, Chinese Academy of Medical Sciences, No. 639 Zhizaoju Road, Shanghai 200011, China
| | - Hongyan Chen
- Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; Shanghai Engineering Research Center of Advanced Dental Technology and Materials, Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology, National Clinical Research Center for Oral Diseases, No. 639 Zhizaoju Road, Shanghai 200011, China
| | - Jiaxin Luo
- Department of Dental Implantology, School and Hospital of Stomatology, Guangdong Engineering Research Center of Oral Restoration and Reconstruction, Guangzhou Key Laboratory of Basic and Applied Research of Oral Regenerative Medicine, Guangzhou Medical University, No. 195 Dongfengwest Road, Guangzhou 510160, China
| | - Sihan Lin
- Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; Shanghai Engineering Research Center of Advanced Dental Technology and Materials, Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology, National Clinical Research Center for Oral Diseases, No. 639 Zhizaoju Road, Shanghai 200011, China
| | - Guangzheng Yang
- Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; Shanghai Engineering Research Center of Advanced Dental Technology and Materials, Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology, National Clinical Research Center for Oral Diseases, No. 639 Zhizaoju Road, Shanghai 200011, China
| | - Mingliang Zhou
- Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; Shanghai Engineering Research Center of Advanced Dental Technology and Materials, Shanghai Key Laboratory of Stomatology & Shanghai Research Institute of Stomatology, National Clinical Research Center for Oral Diseases, No. 639 Zhizaoju Road, Shanghai 200011, China.
| | - Jiang Tao
- Department of General Dentistry, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University; National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Research Unit of Oral and Maxillofacial Regenerative Medicine, Chinese Academy of Medical Sciences, No. 639 Zhizaoju Road, Shanghai 200011, China.
| |
Collapse
|
5
|
Gao Y, Huang C, Ge D, Liao Y, Chen Y, Li S, Yu HY. Highly efficient dissolution and reinforcement mechanism of robust and transparent cellulose films for smart packaging. Int J Biol Macromol 2024; 254:128046. [PMID: 37956816 DOI: 10.1016/j.ijbiomac.2023.128046] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2023] [Revised: 11/03/2023] [Accepted: 11/09/2023] [Indexed: 11/15/2023]
Abstract
The packaging of fresh foods increasingly focuses on renewable and eco-friendly cellulose films, but their low dissolution efficiency and weak mechanical strength greatly limit their wide application, which also cannot be used for smart packaging. Here, a highly efficient synergistic chloride-salt dissolution method was proposed to fabricate robust, transparent, and smart cellulose films. Cellulose films with appropriate Ca2+ concentration exhibited robust mechanical strength, better thermal stability, high transparency and crystallinity. The metal chelation of Ca2+ with cellulose chains could induce cellulose chain arrangement during the cellulose regeneration process. Particularly, compared to pure cellulose films, the tensile strength and elongation at break of cellulose films with suitable Ca2+ were increased by 167 % and 200 %, respectively. Moreover, optimal cellulose films can be used to reflect the quality of the fruit by detecting changes in ethanol gas. Hence, a novel strategy is presented to fabricate robust and transparent cellulose films with great potential application for smart packaging.
Collapse
Affiliation(s)
- Youjie Gao
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Chengling Huang
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Dan Ge
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Yiqi Liao
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Yi Chen
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Shenghong Li
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China
| | - Hou-Yong Yu
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, 928 Second Avenue, Xiasha Higher Education Zone, Hangzhou 310018, China.
| |
Collapse
|
6
|
Mihaela Raţă D, Niculina Cadinoiu A, Ionut Atanase L, Calin Mihalache G, Popa M. Design and characterization of dexamethasone phosphate -loaded microcapsules obtained by a double-emulsion method. Int J Pharm 2023; 639:122971. [PMID: 37105242 DOI: 10.1016/j.ijpharm.2023.122971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2023] [Revised: 04/12/2023] [Accepted: 04/15/2023] [Indexed: 04/29/2023]
Abstract
Polymeric microcapsules are extensively investigated as drug delivery systems for a broad range of applications. In the present study, Dexamethasone-loaded carboxylated chitosan (CCS)/poly (vinyl alcohol) (PVA)-based microcapsules were prepared in view of their potential administration by inhalation for the treatment of lung diseases. The crosslinking between PVA and CCS was activated by [4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride] (DMT-MM) and the FTIR results proved the formation of ester bonds between the two polymers. The sizes of the obtained microcapsules are influenced by the ratio between the polymers but also by the concentration of the DMT-MM activator. Moreover, the amount of PVA in the system has an important influence on swelling degree, encapsulation efficiency, drug release degree, biodegradation and protein adsorption. The sample with the highest amount of PVA has the highest crosslinking density and thus the lowest swelling degree and encapsulation efficiency. However, an encapsulation degree of 61.3% was obtained for the sample MCP-6 with the lowest PVA content. The same sample showed the lowest BSA adsorption. A controlled and sustained Dexamethasone release of around 90% was observed in PBS at pH 7.4 and 37°C during 24 h. All the obtained samples were hemocompatibles and thus can be used as efficient drug delivery systems.
Collapse
Affiliation(s)
- Delia Mihaela Raţă
- "Apollonia" University of Iasi, Pacurari Street, No. 11, 700511, Iasi, Romania
| | | | - Leonard Ionut Atanase
- "Apollonia" University of Iasi, Pacurari Street, No. 11, 700511, Iasi, Romania; Academy of Romanian Scientists, Ilfov Street, No. 3, Sector 5, 050045, Bucharest, Romania
| | | | - Marcel Popa
- "Apollonia" University of Iasi, Pacurari Street, No. 11, 700511, Iasi, Romania; Academy of Romanian Scientists, Ilfov Street, No. 3, Sector 5, 050045, Bucharest, Romania
| |
Collapse
|
7
|
Wang J, Han X, Zhang C, Liu K, Duan G. Source of Nanocellulose and Its Application in Nanocomposite Packaging Material: A Review. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:nano12183158. [PMID: 36144946 PMCID: PMC9502214 DOI: 10.3390/nano12183158] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Revised: 09/04/2022] [Accepted: 09/04/2022] [Indexed: 05/12/2023]
Abstract
Food packaging nowadays is not only essential to preserve food from being contaminated and damaged, but also to comply with science develop and technology advances. New functional packaging materials with degradable features will become a hot spot in the future. By far, plastic is the most common packaging material, but plastic waste has caused immeasurable damage to the environment. Cellulose known as a kind of material with large output, wide range sources, and biodegradable features has gotten more and more attention. Cellulose-based materials possess better degradability compared with traditional packaging materials. With such advantages above, cellulose was gradually introduced into packaging field. It is vital to make packaging materials achieve protection, storage, transportation, market, and other functions in the circulation process. In addition, it satisfied the practical value such as convenient sale and environmental protection, reduced cost and maximized sales profit. This review introduces the cellulose resource and its application in composite packaging materials, antibacterial active packaging materials, and intelligent packaging materials. Subsequently, sustainable packaging and its improvement for packaging applications were introduced. Finally, the future challenges and possible solution were provided for future development of cellulose-based composite packaging materials.
Collapse
Affiliation(s)
- Jingwen Wang
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Xiaoshuai Han
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
- Correspondence: (X.H.); (C.Z.); (G.D.)
| | - Chunmei Zhang
- Institute of Materials Science and Devices, School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
- Correspondence: (X.H.); (C.Z.); (G.D.)
| | - Kunming Liu
- Faculty of Materials Metallurgy and Chemistry, Jiangxi University of Science and Technology, Ganzhou 341000, China
| | - Gaigai Duan
- Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Materials Science and Engineering, Nanjing Forestry University, Nanjing 210037, China
- Correspondence: (X.H.); (C.Z.); (G.D.)
| |
Collapse
|
8
|
Campalani C, Causin V, Selva M, Perosa A. Fish-Waste-Derived Gelatin and Carbon Dots for Biobased UV-Blocking Films. ACS APPLIED MATERIALS & INTERFACES 2022; 14:35148-35156. [PMID: 35877809 PMCID: PMC9354012 DOI: 10.1021/acsami.2c11749] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/02/2022] [Accepted: 07/14/2022] [Indexed: 06/15/2023]
Abstract
The fish industry produces every year huge amounts of waste that represent an underutilized source of chemical richness. In this contribution, type I collagen was extracted from the scales of Mugil cephalus and carbon dots (CDs) were synthesized from the scales of Dicentrarchus labrax. These materials were combined to make hybrid films with UV-blocking ability, by casting a mixture of gelatin, glycerol (15%), and CDs (0, 1, 3, and 5%). The films were fully characterized from the mechanical, morphological, and optical point of view. Here, 40 μm thick films were obtained, characterized by a high water solubility (70%); moreover, the presence of CDs improved the film mechanical properties, in particular increasing the tensile strength (TS) up to 17 MPa and elongation at break (EAB) up to 40%. The CDs also modulated water vapor permeability and the thermal stability of the films. From the optical point of view, with just 5% loading of CDs the films blocked almost 70% of the UV radiation with negligible change in transparency (88.6% for the nonloaded vs 84.4% for 5% CDs) and opacity (1.32 for nonloaded vs 1.61 for 5% CDs). These types of hybrid biobased films hold promise for the production of sustainable UV-shields both for human health and for prolonging the shelf life of food.
Collapse
Affiliation(s)
- Carlotta Campalani
- Department
of Molecular Sciences and Nanosystems, Università
Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia Mestre, Italy
| | - Valerio Causin
- Dipartimento
di Scienze Chimiche, Università di
Padova, via Marzolo 1, 35131 Padova, Italy
| | - Maurizio Selva
- Department
of Molecular Sciences and Nanosystems, Università
Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia Mestre, Italy
| | - Alvise Perosa
- Department
of Molecular Sciences and Nanosystems, Università
Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia Mestre, Italy
| |
Collapse
|
9
|
Visco A, Scolaro C, Facchin M, Brahimi S, Belhamdi H, Gatto V, Beghetto V. Agri-Food Wastes for Bioplastics: European Prospective on Possible Applications in Their Second Life for a Circular Economy. Polymers (Basel) 2022; 14:2752. [PMID: 35808796 PMCID: PMC9268966 DOI: 10.3390/polym14132752] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/02/2022] [Revised: 06/22/2022] [Accepted: 06/28/2022] [Indexed: 02/08/2023] Open
Abstract
Agri-food wastes (such as brewer's spent grain, olive pomace, residual pulp from fruit juice production, etc.) are produced annually in very high quantities posing a serious problem, both environmentally and economically. These wastes can be used as secondary starting materials to produce value-added goods within the principles of the circular economy. In this context, this review focuses on the use of agri-food wastes either to produce building blocks for bioplastics manufacturing or biofillers to be mixed with other bioplastics. The pros and cons of the literature analysis have been highlighted, together with the main aspects related to the production of bioplastics, their use and recycling. The high number of European Union (EU)-funded projects for the valorisation of agri-food waste with the best European practices for this industrial sector confirm a growing interest in safeguarding our planet from environmental pollution. However, problems such as the correct labelling and separation of bioplastics from fossil ones remain open and to be optimised, with the possibility of reuse before final composting and selective recovery of biomass.
Collapse
Affiliation(s)
- Annamaria Visco
- Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy; (C.S.); (S.B.); (H.B.)
- Institute for Polymers, Composites and Biomaterials-CNR IPCB, Via Paolo Gaifami 18, 95126 Catania, Italy
| | - Cristina Scolaro
- Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy; (C.S.); (S.B.); (H.B.)
| | - Manuela Facchin
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy;
| | - Salim Brahimi
- Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy; (C.S.); (S.B.); (H.B.)
| | - Hossem Belhamdi
- Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy; (C.S.); (S.B.); (H.B.)
| | - Vanessa Gatto
- Crossing S.r.l., Viale della Repubblica 193/b, 31100 Treviso, Italy;
| | - Valentina Beghetto
- Department of Molecular Sciences and Nanosystems, University Ca’ Foscari of Venice, Via Torino 155, 30172 Mestre, Italy;
- Crossing S.r.l., Viale della Repubblica 193/b, 31100 Treviso, Italy;
| |
Collapse
|
10
|
Boosting physical-mechanical properties of adipic acid/chitosan films by DMTMM cross-linking. Int J Biol Macromol 2022; 209:2009-2019. [PMID: 35513101 DOI: 10.1016/j.ijbiomac.2022.04.181] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2022] [Revised: 04/20/2022] [Accepted: 04/25/2022] [Indexed: 12/26/2022]
Abstract
In this paper we present a novel strategy to easily prepare biodegradable chitosan derived films as new packaging systems. Combination of chitosan, adipic acid and 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride (DMTMM) allowed to obtain high-performing cross-linked films. Biobased glycerol was employed as plasticizer. An in-depth study was performed on ten different samples in order to evaluate the role of DMTMM as cross-linking agent. Experimental data showed that 15 wt% of DMTMM enhanced moisture content and moisture uptake (10.42% and 11.11%), water vapor permeability (0.13 10-7 g m-1 h-1 Pa-1) and good UV barrier properties. Additionally, 30 wt% of DMTMM significantly increased the tensile strength of films up to 83 MPa and elongation at break values reached 39.7%. Thermogravimetric, IR, XRD and SEM analysis confirmed that physical-mechanical properties of the obtained films were considerably improved, due to cross-linking by DMTMM, demonstrating promising properties for packaging applications.
Collapse
|
11
|
Engin MS, Zamahay F, Kalkan S, Otağ MR. Physical, mechanical, and bioactive properties of edible film based on sodium alginate enriched with
Lythrum salicaria
L. extract. J FOOD PROCESS PRES 2022. [DOI: 10.1111/jfpp.16620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
Affiliation(s)
| | - Fatmanur Zamahay
- Department of Food Engineering Giresun University Giresun Turkey
| | - Selin Kalkan
- Department of Food Engineering Giresun University Giresun Turkey
| | | |
Collapse
|
12
|
Attempt to Extend the Shelf-Life of Fish Products by Means of Innovative Double-Layer Active Biodegradable Films. Polymers (Basel) 2022; 14:polym14091717. [PMID: 35566883 PMCID: PMC9104978 DOI: 10.3390/polym14091717] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2022] [Revised: 04/20/2022] [Accepted: 04/21/2022] [Indexed: 12/05/2022] Open
Abstract
In this study, we aimed to produce, innovative and, at the same time, environmentally-friendly, biopolymer double-layer films with fish processing waste and active lingonberry extract as additives. These double-layered films were based on furcellaran (FUR) (1st layer) and carboxymethyl cellulose (CMC) with a gelatin hydrolysate (HGEL) (2nd layer). The aim of the study was to assess their impact on the durability of perishable salmon fillets during storage, and to evaluate their degree of biodegradation. The fillets were analyzed for changes in microbiological quality (total microbial count, yeast and molds, and psychrotrophic bacteria), biogenic amine content (HPLC), and lipid oxidation (peroxidase and acid values, TBARS). The degree of biodegradation includes analysis of film and compost chemical composition solubility, respiratory activity, and ecotoxicity testing. The obtained results allow to suggest that active films are not only bacteriostatic, but even bactericidal when they used to coat fish fillets. Concerning the group of samples covered with the double-layer films, a 19.42% lower total bacteria count was noted compared to the control samples. Furthermore, it can be observed that the applied double-layer films have a potentially strong inhibitory effect on the accumulation of biogenic amines in fish, which is correlated with its antimicrobial effect (the total biogenic amine content for control samples totaled 263.51 mg/kg, while for the double-layer samples, their value equaled: 164.90 mg/kg). The achieved results indicate a high biodegradation potential, however, a too low pH of the film results in limiting seed germination and growth. Despite that, of these, double-layer films are a technology that has applicative potential.
Collapse
|
13
|
Jiang Z, Ngai T. Recent Advances in Chemically Modified Cellulose and Its Derivatives for Food Packaging Applications: A Review. Polymers (Basel) 2022; 14:polym14081533. [PMID: 35458283 PMCID: PMC9032711 DOI: 10.3390/polym14081533] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/08/2022] [Revised: 04/06/2022] [Accepted: 04/06/2022] [Indexed: 02/06/2023] Open
Abstract
The application of cellulose in the food packaging field has gained increasing attention in recent years, driven by the desire for sustainable products. Cellulose can replace petroleum-based plastics because it can be converted to biodegradable and nontoxic polymers from sustainable natural resources. These products have increasingly been used as coatings, self-standing films, and paperboards in food packaging, owing to their promising mechanical and barrier properties. However, their utilization is limited because of the high hydrophilicity of cellulose. With the presence of a large quantity of functionalities within pristine cellulose and its derivatives, these building blocks provide a unique platform for chemical modification via covalent functionalization to introduce stable and permanent functionalities to cellulose. A primary aim of chemical attachment is to reduce the probability of component leaching in wet and softened conditions and to improve the aqueous, oil, water vapor, and oxygen barriers, thereby extending its specific use in the food packaging field. However, chemical modification may affect the desirable mechanical, thermal stabilities and biodegradability exhibited by pristine cellulose. This review exhaustively reports the research progress on cellulose chemical modification techniques and prospective applications of chemically modified cellulose for use in food packaging, including active packaging.
Collapse
|
14
|
He Z, Zhao J, Liu C, Li W, Wang Y. Ameliorating effect of γ-aminobutyric acid on the physical performance of whey protein films. Food Hydrocoll 2022. [DOI: 10.1016/j.foodhyd.2021.107207] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
15
|
Sole R, Toldo S, Bortoluzzi M, Beghetto V. A sustainable route for the synthesis of alkyl arylacetates via halogen and base free carbonylation of benzyl acetates. Catal Sci Technol 2022. [DOI: 10.1039/d2cy00203e] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
The Pd-catalysed carbonylation of benzyl acetates for the synthesis of 2-alkylbenzyl acetates in the absence of base and halogen sources was investigated.
Collapse
Affiliation(s)
- Roberto Sole
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca' Foscari Venezia, Via Torino 155, 30172 (VE), Italy
- Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), via C. Ulpiani 27, 70126 Bari, Italy
| | - Sofia Toldo
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca' Foscari Venezia, Via Torino 155, 30172 (VE), Italy
| | - Marco Bortoluzzi
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca' Foscari Venezia, Via Torino 155, 30172 (VE), Italy
| | - Valentina Beghetto
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca' Foscari Venezia, Via Torino 155, 30172 (VE), Italy
- Consorzio Interuniversitario per le Reattività Chimiche e la Catalisi (CIRCC), via C. Ulpiani 27, 70126 Bari, Italy
| |
Collapse
|
16
|
Morandini A, Leonetti B, Riello P, Sole R, Gatto V, Caligiuri I, Rizzolio F, Beghetto V. Synthesis and Antimicrobial Evaluation of Bis-morpholine Triazine Quaternary Ammonium Salts. ChemMedChem 2021; 16:3172-3176. [PMID: 34288499 PMCID: PMC8596621 DOI: 10.1002/cmdc.202100409] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2021] [Revised: 07/18/2021] [Indexed: 11/07/2022]
Abstract
Efficient, environmentally and economically sustainable, and nontoxic antibacterial products are of global relevance in the fight against microorganism contamination. In this work, an easy and straightforward method for the synthesis of bis-morpholino triazine quaternary ammonium salts (bis-mTQAS) is reported, starting from 2,4,6-trichloro-1,3,5-triazine or 2,4-dichloro-6-methoxy-1,3,5-triazine and various N-alkylmorpholines. Bis-mTQAS were tested as antimicrobials against Gram-negative and Gram-positive bacterial strains. The best-performing bis-mTQAS were found to achieve total disinfection against Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 at 50 and 400 μg/mL, respectively. Distinctively, bis-mTQAS with the highest antimicrobial efficiency had lowest cytotoxicity.
Collapse
Affiliation(s)
- Andrea Morandini
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
| | - Benedetta Leonetti
- Brenta S.r.l. – Nine trees groupViale Milano 2636075Montecchio MaggioreVicenzaItaly
| | - Pietro Riello
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
- European Centre for Living Technology (ECLT) Ca' BottacinDorsoduro 391130123VeniceItaly
| | - Roberto Sole
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
- CIRCCVia C. Ulpiani 2770126BariItaly
| | - Vanessa Gatto
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
- Crossing S.r.l.Viale della Repubblica 193/b31100TrevisoItaly
| | - Isabella Caligiuri
- Pathology UnitCentro di Riferimento Oncologico (CRO) IRCCSVia F. Gallini 233081AvianoItaly
| | - Flavio Rizzolio
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
- Pathology UnitCentro di Riferimento Oncologico (CRO) IRCCSVia F. Gallini 233081AvianoItaly
| | - Valentina Beghetto
- Dipartimento di Scienze Molecolari e NanosistemiUniversità Ca' Foscari di VeneziaVia Torino 15530172Venezia MestreItaly
- Crossing S.r.l.Viale della Repubblica 193/b31100TrevisoItaly
| |
Collapse
|
17
|
Beghetto V, Sole R, Buranello C, Al-Abkal M, Facchin M. Recent Advancements in Plastic Packaging Recycling: A Mini-Review. MATERIALS (BASEL, SWITZERLAND) 2021; 14:4782. [PMID: 34500870 PMCID: PMC8432502 DOI: 10.3390/ma14174782] [Citation(s) in RCA: 25] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/22/2021] [Revised: 08/12/2021] [Accepted: 08/19/2021] [Indexed: 01/11/2023]
Abstract
Today, the scientific community is facing crucial challenges in delivering a healthier world for future generations. Among these, the quest for circular and sustainable approaches for plastic recycling is one of the most demanding for several reasons. Indeed, the massive use of plastic materials over the last century has generated large amounts of long-lasting waste, which, for much time, has not been object of adequate recovery and disposal politics. Most of this waste is generated by packaging materials. Nevertheless, in the last decade, a new trend imposed by environmental concerns brought this topic under the magnifying glass, as testified by the increasing number of related publications. Several methods have been proposed for the recycling of polymeric plastic materials based on chemical or mechanical methods. A panorama of the most promising studies related to the recycling of polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), and polystyrene (PS) is given within this review.
Collapse
Affiliation(s)
- Valentina Beghetto
- Department of Molecular Sciences and Nanosystems, University Ca’Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (R.S.); (C.B.); (M.A.-A.); (M.F.)
- Crossing S.r.l., Viale della Repubblica 193/b, 31100 Treviso, Italy
| | - Roberto Sole
- Department of Molecular Sciences and Nanosystems, University Ca’Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (R.S.); (C.B.); (M.A.-A.); (M.F.)
| | - Chiara Buranello
- Department of Molecular Sciences and Nanosystems, University Ca’Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (R.S.); (C.B.); (M.A.-A.); (M.F.)
| | - Marco Al-Abkal
- Department of Molecular Sciences and Nanosystems, University Ca’Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (R.S.); (C.B.); (M.A.-A.); (M.F.)
| | - Manuela Facchin
- Department of Molecular Sciences and Nanosystems, University Ca’Foscari of Venice, Via Torino 155, 30172 Mestre, Italy; (R.S.); (C.B.); (M.A.-A.); (M.F.)
| |
Collapse
|
18
|
Morandini A, Spadati E, Leonetti B, Sole R, Gatto V, Rizzolio F, Beghetto V. Sustainable triazine-derived quaternary ammonium salts as antimicrobial agents. RSC Adv 2021; 11:28092-28096. [PMID: 35480717 PMCID: PMC9038131 DOI: 10.1039/d1ra03455c] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/04/2021] [Accepted: 08/15/2021] [Indexed: 12/23/2022] Open
Abstract
The first examples of highly efficient antimicrobial triazine-derived bis imidazolium quaternary ammonium salts (TQAS) are reported. TQAS have been prepared with an easy, atom efficient, economically sustainable strategy and tested as antimicrobial agents, reaching MIC values below 10 mg L-1. Distinctively, TQAS have low MIC and low cytotoxicity.
Collapse
Affiliation(s)
- Andrea Morandini
- Università Ca' Foscari di Venezia Via Torino 155 Venezia Mestre 30172 Italy
| | - Emanuele Spadati
- Università Ca' Foscari di Venezia Via Torino 155 Venezia Mestre 30172 Italy
| | - Benedetta Leonetti
- Brenta S.r.l. - Nine Trees Group. Viale Milano, 26 36075 Montecchio Maggiore Vicenza Italy
| | - Roberto Sole
- Università Ca' Foscari di Venezia Via Torino 155 Venezia Mestre 30172 Italy
- Consorzio Interuniversitario per le Reattività Chimiche e Catalisi (CIRCC) Via C. Ulpiani 27 70126 Bari Italy
| | - Vanessa Gatto
- Crossing S.r.l. Viale della Repubblica 193/b Treviso 31100 Italy
| | - Flavio Rizzolio
- Università Ca' Foscari di Venezia Via Torino 155 Venezia Mestre 30172 Italy
| | - Valentina Beghetto
- Università Ca' Foscari di Venezia Via Torino 155 Venezia Mestre 30172 Italy
- Crossing S.r.l. Viale della Repubblica 193/b Treviso 31100 Italy
| |
Collapse
|
19
|
Recyclable Ir Nanoparticles for the Catalytic Hydrogenation of Biomass-Derived Carbonyl Compounds. Catalysts 2021. [DOI: 10.3390/catal11080914] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022] Open
Abstract
The valorisation of biomass-derived platform chemicals via catalytic hydrogenation is an eco-friendly tool which allows us to recover bio-based building blocks and produce fine chemicals with high industrial appeal. In the present study, a novel surfactant-type triazolyl-thioether ligand was prepared, showing excellent catalytic activity in the presence of bis(1,5-cyclooctadiene)diiridium(I) dichloride [Ir(COD)Cl]2 for the hydrogenation of furfural, cinnamaldehyde, levulinic acid, 5-hydroxymethylfurfural, vanillin, and citral. Easy recovery by liquid/liquid extraction allowed us to recover the catalyst, which could then be efficiently recycled up to 11 times for the hydrogenation of furfural. In-depth analysis revealed the formation of spherical structures with metal nanoparticles as big as 2–6 nm surrounded by the anionic ligand, preventing iridium nanoparticle degradation.
Collapse
|
20
|
Efficient Triazine Derivatives for Collagenous Materials Stabilization. MATERIALS 2021; 14:ma14113069. [PMID: 34199755 PMCID: PMC8200008 DOI: 10.3390/ma14113069] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/20/2021] [Revised: 05/16/2021] [Accepted: 05/31/2021] [Indexed: 12/28/2022]
Abstract
Nowadays, the need to reduce plastic waste and scantly biodegradable fossil-based products is of great importance. The use of leather as an alternative to synthetic materials is gaining renewed interest, but it is fundamental that any alternative to plastic-based materials should not generate an additional environmental burden. In the present work, a simple protocol for collagen stabilization mediated by 2-chloro-4,6-diethoxy-1,3,5-triazine (CDET) and a tert-amine has been described. Different tert-amines were tested in combination with CDET in a standard amidation reaction between 2-phenylethylamine and benzoic acid. Best performing condensation systems have been further tested for the cross-linking of both collagen powder and calf hides. The best results were achieved with CDET/NMM giving high-quality leather with improved environmental performances.
Collapse
|
21
|
Fabrication of super-high transparent cellulose films with multifunctional performances via postmodification strategy. Carbohydr Polym 2021; 260:117760. [PMID: 33712122 DOI: 10.1016/j.carbpol.2021.117760] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2020] [Revised: 01/09/2021] [Accepted: 02/01/2021] [Indexed: 01/17/2023]
Abstract
A transparent versatile cellulose platform film was prepared from Eucalyptus pulp in this work. Based on such cellulose platform, multifunctional cellulose films with ultraviolet-shielding, photochromism, and strong mechanical strength were fabricated via nucleophilic postmodification strategy by introducing a versatile spiropyran moiety into cellulose molecules. The fabricated cellulose films exhibited super-high transmittance up to 96% and performed notable ultraviolet-shielding capacity at 200-400 nm. Moreover, the photochromic performance of cellulose films with color changes could be clearly observed by the naked eyes, and the fluorescent blue could be excited. Besides, the tensile stress of multi-functional cellulose film was about 80 MPa, which was almost 8 times stronger than that of the commercial polyethylene film at the same thickness. It is noteworthy that these superior performances promote such a cellulose platform to be a versatile precursor for fabricating various multi-functional cellulose used in the fields of out-door coating, transparent packaging, optical screen,etc.
Collapse
|
22
|
Chen Z, Liu J, Chen Y, Zheng X, Liu H, Li H. Multiple-Stimuli-Responsive and Cellulose Conductive Ionic Hydrogel for Smart Wearable Devices and Thermal Actuators. ACS APPLIED MATERIALS & INTERFACES 2021; 13:1353-1366. [PMID: 33351585 DOI: 10.1021/acsami.0c16719] [Citation(s) in RCA: 56] [Impact Index Per Article: 18.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Stimulus-responsive hydrogels, such as conductive hydrogels and thermoresponsive hydrogels, have been explored extensively and are considered promising candidates for smart materials such as wearable devices and artificial muscles. However, most of the existing studies on stimulus-responsive hydrogels have mainly focused on their single stimulus-responsive property and have not explored multistimulus-responsive or multifunction properties. Although some works involved multifunctionality, the prepared hydrogels were incompatible. In this work, a multistimulus-responsive and multifunctional hydrogel system (carboxymethyl cellulose/poly acrylic-acrylamide) with good elasticity, superior flexibility, and stable conductivity was prepared. The prepared hydrogel not only showed excellent human motion detection and physiological signal response but also possessed the ability to respond to environmental temperature changes. By integrating a conductive hydrogel with a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) hydrogel to form a bilayer hydrogel, the prepared bilayer also functioned as two kinds of actuators owing to the different degrees of swelling and shrinking under different thermal stimuli. Furthermore, the different thermochromic properties of each layer in the bilayer hydrogel endowed the hydrogel with a thermoresponsive "smart" feature, the ability to display and conceal information. Therefore, the prepared hydrogel system has excellent prospects as a smart material in different applications, such as ionic skin, smart info-window, and soft robotics.
Collapse
Affiliation(s)
- Zhen Chen
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Jing Liu
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Yujie Chen
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Xu Zheng
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Hezhou Liu
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| | - Hua Li
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China
| |
Collapse
|
23
|
Sole R, Gatto V, Conca S, Bardella N, Morandini A, Beghetto V. Sustainable Triazine-Based Dehydro-Condensation Agents for Amide Synthesis. Molecules 2021; 26:E191. [PMID: 33401732 PMCID: PMC7795458 DOI: 10.3390/molecules26010191] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2020] [Revised: 12/22/2020] [Accepted: 12/29/2020] [Indexed: 12/18/2022] Open
Abstract
Conventional methods employed today for the synthesis of amides often lack of economic and environmental sustainability. Triazine-derived quaternary ammonium salts, e.g., 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM(Cl)), emerged as promising dehydro-condensation agents for amide synthesis, although suffering of limited stability and high costs. In the present work, a simple protocol for the synthesis of amides mediated by 2-chloro-4,6-dimethoxy-1,3,5-triazine (CDMT) and a tert-amine has been described and data are compared to DMTMM(Cl) and other CDMT-derived quaternary ammonium salts (DMT-Ams(X), X: Cl- or ClO4-). Different tert-amines (Ams) were tested for the synthesis of various DMT-Ams(Cl), but only DMTMM(Cl) could be isolated and employed for dehydro-condensation reactions, while all CDMT/tert-amine systems tested were efficient as dehydro-condensation agents. Interestingly, in best reaction conditions, CDMT and 1,4-dimethylpiperazine gave N-phenethyl benzamide in 93% yield in 15 min, with up to half the amount of tert-amine consumption. The efficiency of CDMT/tert-amine was further compared to more stable triazine quaternary ammonium salts having a perchlorate counter anion (DMT-Ams(ClO4)). Overall CDMT/tert-amine systems appear to be a viable and more economical alternative to most dehydro-condensation agents employed today.
Collapse
Affiliation(s)
- Roberto Sole
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia, Italy; (R.S.); (S.C.); (N.B.); (A.M.)
| | - Vanessa Gatto
- Crossing srl, Viale della Repubblica 193/b, 31100 Treviso, Italy;
| | - Silvia Conca
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia, Italy; (R.S.); (S.C.); (N.B.); (A.M.)
| | - Noemi Bardella
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia, Italy; (R.S.); (S.C.); (N.B.); (A.M.)
| | - Andrea Morandini
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia, Italy; (R.S.); (S.C.); (N.B.); (A.M.)
| | - Valentina Beghetto
- Dipartimento di Scienze Molecolari e Nanosistemi, Università Ca’ Foscari di Venezia, Via Torino 155, 30172 Venezia, Italy; (R.S.); (S.C.); (N.B.); (A.M.)
- Crossing srl, Viale della Repubblica 193/b, 31100 Treviso, Italy;
| |
Collapse
|