Combined effects of octenylsuccination and beeswax on pullulan films: Water-resistant and mechanical properties

A novel edible biocomposite coating based on alginate from the brown seaweed Dictyota mertensii loaded with beeswax nanoparticles extends the shelf life of yellow passion fruit

In this study, an edible biocomposite coating of alginate extracted from the brown seaweed Dictyota mertensii was loaded with beeswax nanoparticles (BDMAB) to extend the shelf life of yellow passion fruit (Passiflora edulis f. flavicarpa). The films were characterized by morphology, moisture content, contact angle, water vapor permeability, solubility, and optical and mechanical properties. Using a 4 × 6 factorial design, coated fruit was evaluated during six storage intervals (0, 2, 4, 6, 8, 10 days) at 22.5 ± 0.5 °C and 65 ± 5 % RH, focusing on respiration rate, weight loss, peel thickness and color, pulp yield and color, soluble solids, titratable acidity, ascorbic acid, phenolics, antioxidant capacity, and sensory acceptance. The BDMAB coating, composed of 67.9 % (w/w) ADM (bleached), 5 % (w/w) glycerol, 8.5 % (w/w) beeswax, and 18.6 % (w/w) Tween 80, significantly (p < 0.05) reduced the respiration rate, minimized weight loss, and preserved quality attributes, such as acidity, ascorbic acid, phenols, and antioxidant capacity. A 3-day extension in shelf life was inferred based on the climacteric peak delay of BDMAB-coated fruits compared with the control. Sensory analysis confirmed the acceptance of BDMAB coating. Therefore, BDMAB biocomposite coatings have great potential for preserving yellow passion fruit and promoting sustainability and conservation.

Enhancing Strawberry Freshness: Multifunction Sustainable Films Utilizing Two Types of Modified Carbon Nanotubes for Photothermal Food Packaging

Currently, antimicrobial films with stable and efficient antibacterial activities are receiving considerable attention in the food packaging industry. Herein, a chemically/physically linked konjac glucomannan-sodium alginate (KGM-SA)@carbon nanotubes (CNTs)/Fe3+ composite film with outstanding resistance to ultraviolet radiation, oxidation, and bacteria, as well as excellent photothermal effects and mechanical properties, was successfully prepared using a solvent flow method. Tannic acid-modified carboxyl-functionalized CNTs (TCCNTs), l-cysteine-modified carboxyl-functionalized CNTs (LCCNTs), and Fe3+ were incorporated into the prepared film. The film structure of KGM-SA@CNTs/Fe3+ was characterized using various methods, confirming the formation of a dual-cross-linked network through metal-coordination bonds and hydrogen bonding. This unique structure endowed the film with excellent water vapor permeability (3.58 g mm/m2 day kPa), water resistance (water contact angle = 93.66°), and thermal stability. Further, the film exhibited outstanding photothermal conversion efficiency and stability under near-infrared irradiation (300 mW/cm2) as well as excellent bactericidal properties against Staphylococcus aureus and Escherichia coli, achieving a bacterial inhibition rate of >99%. In a strawberry preservation experiment, the KGM-SA@CNTs/Fe3+ composite film exhibited remarkable preservation effects, extending the shelf life of strawberries by 4-6 d. Thus, this photothermal antibacterial film offers a new approach for the application of CNTs in food packaging.

Using natural starch granules to disperse solid beeswax into micron-sized droplets in emulsion

Use of beeswax together with starch to manufacture emulsion for fruit preservation has attracted wide attention in food packaging. In this paper, esterified starch (M-PS) granules prepared from natural potato starch were used to replace nanocrystals to prepare beeswax emulsion. The swelling property of M-PS granules was used to solve the problem of uneven dispersion of beeswax. Atomic force microscope (AFM) images showed that the network gel structure formed by M-PS granules limited the movement of beeswax droplets, and the droplet size was <1.0 μm. When the beeswax emulsion was added to the starch paste, the resulting starch-beeswax composite emulsion had a stable gel structure. Bananas were coated with the composite emulsion. After 7 days of storage, compared with the test data of bare bananas, the weight loss rate decreased by 42 %, the titratable acidity increased by 21 %, and the vitamin C was higher by 20 % of coated bananas. The formed coating effectively inhibited the decline of banana quality.

Microbial Polysaccharides as Functional Components of Packaging and Drug Delivery Applications

This review examines microbial polysaccharides' properties relevant to their use in packaging and pharmaceutical applications. Microbial polysaccharides are produced by enzymes found in the cell walls of microbes. Xanthan gum, curdlan gum, pullulan, and bacterial cellulose are high-molecular-weight substances consisting of sugar residues linked by glycoside bonds. These polysaccharides have linear or highly branched molecular structures. Packaging based on microbial polysaccharides is readily biodegradable and can be considered as a renewable energy source with the potential to reduce environmental impact. In addition, microbial polysaccharides have antioxidant and prebiotic properties. The physico-chemical properties of microbial polysaccharide-based films, including tensile strength and elongation at break, are also evaluated. These materials' potential as multifunctional packaging solutions in the food industry is demonstrated. In addition, their possible use in medicine as a drug delivery system is also considered.

Development and characterization of eco-friendly guar gum-agar-beeswax-based active packaging film for cheese preservation

In this work, an attempt has been made to develop a novel natural polysaccharide-based composite packaging biofilm prepared through a solution casting method. The biofilm is prepared from guar gum (GG) and agar-agar (AA) beeswax (BE). The incorporation of 20 % wt./wt.glycerol BE in the blended polymer GG/AA (50:50) (GG/AA/BE20 (50:50)) film shows a reduction in water solubility (66.67 %), water vapour permeability (69.28 %) and oxygen permeability (72.23 %). Moreover, GG/AA/BE20 (50:50) shows an increment in the tensile strength and elongation of a break by 48.32 % and 26.05 %, respectively, compared to pristine GG film. The scanning electron microscopy (SEM) image reveals defects-free smooth surfaces of the film. The Fourier transform-infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) demonstrated the strong hydrogen bonding between GG, AA, and BE. The biodegradable film shows 99 % degradation within 28 days when placed in the soil. The developed film plays a crucial role in extending the shelf life of cheese, effectively maintaining its moisture content, texture, colour, and pH over a span of up to two months from the point of packaging. These results suggest that GG/AA/BE20 (50:50) composite film is a promising packaging film for cheese preservation.

Preparation of Complex Polysaccharide Gels with Zanthoxylum bungeanum Essential Oil and Their Application in Fish Preservation

In this study, novel functional ZEO-complex gels were prepared using sodium alginate, inulin, grape seed extract (GSE), and Zanthoxylum bungeanum essential oil (ZEO) as the primary raw materials. The effect of the addition of inulin, GSE, and ZEO on water vapor permeability (WVP), tensile strength (TS), and elongation at break (EAB) of ZEO-complex polysaccharide gels was investigated. A comprehensive score (Y) for evaluating the characteristics of ZEO-complex polysaccharide gels was established by principal component analysis. MATLAB analysis and box-Behnken design describe each factor's four-dimensional and three-dimensional interactions. It was found that Y could reach the maximum value when the ZEO addition was at a moderate level (C = 2%). The optimum preparation process of ZEO-complex polysaccharide gels was as follows: the addition of inulin was at 0.84%, the addition of GSE was at 0.04%, and the addition of ZEO was at 2.0785%; in this way, the Y of ZEO-complex polysaccharide gels reached the maximum (0.82276). Optical scanning and X-ray diffraction tests confirmed that the prepared ZEO-complex gels have a smooth and continuous microstructure, good water insulation, and mechanical properties. The storage test results show that ZEO-complex polysaccharide gels could play a significant role in the storage and fresh-keeping of grass carp, and the physicochemical properties of complex polysaccharide gels were improved by adding ZEO. In addition, according to the correlation of fish index changes during storage, adding ZEO in complex polysaccharide gels was closely correlated with the changes in fish TBARS and TVB-N oxidation decay indices. In conclusion, the ZEO-complex polysaccharide gels prepared in this study had excellent water insulation, mechanical properties, and outstanding fresh-keeping effects on grass carp.

Enhanced barrier properties in sweet potato starch films via dual modification by octenyl succinylation and heat moisture treatment for use as plant-based sausage casings

This study assesses the impact of dual modification [octenyl succinylation (OSA) and heat-moisture treatment (HMT)] of sweet potato starch (SPS) on the physicochemical, mechanical, and permeability properties of SPS film. The intrinsic limitations of starch films, such as sensitivity to high humidity, inferior mechanical properties, and weak barrier capabilities, have restricted their use in sausage casings. Nonetheless, the dual-modified SPS film (OSA@HMT-SPS film) demonstrated significantly reduced solubility (P < 0.05), moisture content, water vapor permeability (WVP), and O2 permeability compared to the SPS film. Furthermore, its flexibility and elasticity, indicated by its elongation at break, was notably superior. When used as sausage casings, the OSA@HMT-SPS film effectively mitigated lipid oxidation in sausages better than both the SPS film and commercial collagen casings, owing to its low O2 permeability. As a result, the OSA@HMT-SPS casing presents significant promise as a plant-based sausage casing alternative.

Fabrication and characterization of pullulan/tapioca starch-based antibacterial films incorporated with Litsea cubeba essential oil for meat preservation

Active packaging is a novel technology that utilizes active materials to interact with products and the environment, improving food shelf life. The purpose of this work was to fabricate a multifunctional film using Litsea cubeba essential oil (LC-EO) (1 %, 3 %, 5 %, and 7 %) as the active ingredient and pullulan(P)/tapioca starch (TS) as the carrier material. Adding essential oil improves the films properties, such as barrier ability, anti-oxidant, and antibacterial activity. However, tensile strength (TS) and elongation at break (EAB) were slightly reduced from 28.94 MPa to 11.29 MPa and 15.36 % to 12.19 %. The developed PTS3% films showed the best performance in mechanical properties, especially EAB (14.26 %), WVP (3.26 %) and OP (3.13 %), respectively. The inhibitory zone diameters in the agar-well diffusion test were 18.59 mm for Staphylococcus aureus and 17.32 mm for Escherichia coli. Further study was conducted to compare the preservation effects of film with low-density polyethylene bag (LDPE) on chilled beef. Remarkably, PTS3% film decreased the bacterial population in beef meat while maintaining the pH, color, texture, and TBARS levels within an acceptable range for ten days of storage at 4 °C rather than in a low-density polyethylene bag. The outcomes indicated the potential of PTS3% films in food packaging applications.

Study on hydroxypropyl corn starch/alkyl ketene dimer composite film with enhanced water resistance and mechanical properties

This study aimed to address the limited applicability of starch-based films in food packaging due to their inherent hydrophilicity, by developing a highly hydrophobic and mechanically reinforced film through compositing with alkyl ketene dimer (AKD). The FTIR analysis confirmed the successful introduction of AKD into the starch backbone via esterification by forming a β-keto ester linkage. Notably, the incorporation of AKD resulted in significant improvements in the modified film (S80A20), by exhibiting a higher water contact angle (WCA) of 128.28° and a reduced water vapor permeability (WVP) to 0.81×10-10 (g m/m2 s Pa). These enhancements were attributed to the inherent low surface energy of AKD and the increased surface roughness caused by AKD recrystallization. Moreover, the mechanical properties of the films were also enhanced due to the chemical crosslinking and intermolecular hydrogen bonding, as supported by the results of relaxation temperatures and molecular dynamics simulations. Considering the environmentally friendly and biodegradable nature of all components, the prepared hydrophobic films will hopefully be applied in food packaging.

Multi-functional konjac glucomannan/chitosan bilayer films reinforced with oregano essential oil loaded β-cyclodextrin and anthocyanins for cheese preservation

In this work, a multifunctional bilayer film was prepared by solvent casting method. Elderberry anthocyanins (EA) were incorporated into konjac glucomannan (KGM) film as the inner indicator layer (KEA). β-cyclodextrin (β-CD) loaded with oregano essential oil (OEO) inclusion complexes (β-CD@OEO) was prepared and incorporated into chitosan (CS) film as the outer hydrophobic and antibacterial layer (CS-β-CD@OEO). The impacts of β-CD@OEO on the morphological, mechanical, thermal, water vapor permeability and water resistance properties, pH sensitivity, antioxidant, and antibacterial activities of bilayer films were thoroughly evaluated. The incorporation of β-CD@OEO into bilayer films can significantly improve the mechanical properties (tensile strength (TS): 65.71 MPa and elongation at break (EB): 16.81 %), thermal stability, and water resistance (Water contact angle (WCA): 88.15°, water vapor permeability (WVP): 3.53 g mm/m² day kPa). In addition, the KEA/CS-β-CD@OEO bilayer films showed color variations in acid-base environments, which could be used as pH-responsive indicators. The KEA/CS-β-CD@OEO bilayer films also presented controlled release of OEO, good antioxidant, and antimicrobial activity, which exhibited good potential for the preservation of cheese. To sum up, KEA/CS-β-CD@OEO bilayer films have potential applications in the field of food packaging industry.

Beeswax: A review on the recent progress in the development of superhydrophobic films/coatings and their applications in fruits preservation

Recently, the design and fabrication of bio-inspired superhydrophobic materials using natural lipid additives such as beeswax (BW) have aroused great attention in food packaging as they can minimize the transfer rate of water molecules and have effective moisture barriers. This review discusses the recent progress in the design and fabrication of BW-containing edible films/coatings (e.g., emulsion and blend films, bilayer materials, bionanocomposites, and antimicrobial materials) and their potential applications on the postharvest life and quality attributes of various fruits. Incorporation of BW into polysaccharides- and proteins-based emulsion films effectively improved their hydrophobicity, water vapor, and UV/visible light barrier properties, as well as the film tensile properties. The addition of nanoparticles to BW-based polymeric matrices often results in improved physico-mechanical properties. BW coatings have been also applied to prolong the shelf-life of various climacteric fruits, however, optimization of the wax concentration can be further investigated to develop targeted food storage systems.

Pectin from plantain peels: Green recovery for transformation into reinforced packaging films

Plantain peels as agro-waste are generated in the millions of tons per year with no profitable management strategies. On the other hand, the excessive use of plastic packaging threatens the environment and human health. This research aimed to address both problems via a green approach. High-quality pectin was recovered from plantain peels via an enzyme-assisted and ethanol-recycling process. The yield and galacturonic acid (GalA) content of the recovered low methoxy pectin was 12.43% and 25.0%, respectively, when cellulase was added at 50 U per 5 g peel powder, with a significantly higher recovery rate and purity than the pectin products extracted with no cellulase (P ≤ 0.05). The recovered pectin was further integrated and reinforced with beeswax solid-lipid nanoparticles (BSLNs) to fabricate films as a potential alternative packaging material to single-use plastics. The reinforced pectin films showed improved light barrier, water resistance, mechanical, conformational, and morphological properties. This study presents a sustainable strategy to transform plantain peels into pectin products and pectin-based packaging films with broad applications.

Development of antimicrobial gelatin-ulvan-beeswax composite films: Optimization of formulation using mixture design methodology

A new generation of antimicrobial film was developed by incorporation of ulvan extracted from Ulva intestinalis into gelatin from common carp scale and its water sensitivity was reduced with addition of beeswax. Optimum composition of gelatin (0-100%w/w), ulvan (0-100%w/w) and beeswax (0-10%w/w) for achieving composite films with minimum water solubility (S) and water vapor permeability (WVP) and maximum tensile strength (TS), elongation at break point (EAB) and antibacterial effect on E. coli (EC) were investigated using mixture design methodology. Both pure gelatin and ulvan films and their composites had relatively good mechanical and optical properties. Addition of ulvan to gelatin produced composite films with good antibacterial properties but water resistance of all the films was weak. Addition of beeswax up to ∼5 % improved the water resistance and mechanical properties of the films without jeopardizing their antibacterial properties. The final optimum formulation with a desirability of 0.709 was achieved as 52.18 % of gelatin, 40.83 % of ulvan and 6.97 % of beeswax resulting in a minimum possible S (40 %) and WVP (1.86 10^-10 g/ms Pa) and maximum possible TS (6.23 MPa) and EAB (89 %) with good EC (7.66 mm). Finally, good mechanical, thermal and microstructural properties of the optimum composite film was confirmed. Altogether, a combination of ulvan and beeswax can be a promising solution for development of gelatin films with both antimicrobial properties and lower water sensitivity.

Development of pullulan-based nanocomposite films reinforced with starch nanocrystals for the preservation of fresh beef

BACKGROUND

Incorporation of polysaccharide-based nanofillers is an effective strategy to fabricate bio-nanocomposite films with preferable mechanical, barrier, and surface hydrophobicity properties compared to pure biopolymer films. The objective of this research is to investigate the influence of starch nanocrystals obtained from native (NSNC) and waxy rice starch (WSNC) on the physical-chemical properties of pullulan-based nanocomposite films and their preservation performance on fresh beef.

RESULTS

Continuous SNCs network structure was observed for pullulan-10% SNCs nanocomposite films, whereas the percolation network of SNCs was destroyed and became no longer continuous with increasing SNCs concentration up to 20% in pullulan films. Among the tested films, pullulan-10% SNCs films showed the highest TS values, lowest WVP and OTR values, due to the formation of percolating SNCs network in pullulan matrix. It is noteworthy that the WVP and OTR values of pullulan-10% WSNC films were significantly lower than that of pullulan-10% NSNC films, probably due to higher hydrophobicity and crystallinity of WSNC compared with NSNC. Beef pieces coated with pullulan-SNCs films had higher L^* and a^* values, lower TVB-N, TBARS, and TVC values during 7 days' storage at 4 °C compared with samples coated with pullulan films.

CONCLUSION

Pullulan-SNCs nanocomposite films, especially pullulan-WSNC films, could be potentially used as a coating material for fresh beef due to their desirable oxygen and water barrier properties. © 2022 Society of Chemical Industry.

Effect of octenylsuccination of alginate on structure, mechanical and barrier properties of alginate-zein composite film

This study examines the effect of the chemical modification of alginate (ALG) by octenyl succinic anhydride (OSA) on the physical, mechanical, and barrier properties of the alginate-zein blend film. To reach this goal, the effect of the degree of substitution (DS) of the modified-ALG (OS-ALG) was assessed on the physical, mechanical, and barrier properties of the fabricated composite films. As confirmed by FTIR and XRD, the hydrophobic nature of OS-ALG facilitated the miscibility of OS-ALG-zein than ALG-zein. Moreover, scanning electron microscope (SEM) images confirmed the FTIR and XRD results. Furthermore, the substitution of ALG with OS-ALG in the blend films can significantly improve the water resistance and mechanical strength of the samples. The OSA-modification of ALG increased the water contact angle while decreasing the solubility, moisture content, extensibility, and water vapor permeability. Finally, the OS-ALG (DS = 0.034) and zein would be considered as a new source for the fabrication of biodegradable composite films with excellent structural and barrier properties.

Effects of adding methods and modification types of cellulose on the physicochemical properties of starch/PBAT blown films

This study revealed the relationship between cellulose types/adding methods and film properties, in which sodium carboxymethyl cellulose (CMC), hydroxypropyl methyl cellulose (HPMC), and microcrystalline cellulose (MCC) were added into starch/PBAT blown films in powder, aqueous solution, and emulsion forms, respectively. Cellulose interacted with starch networks via hydrogen bonds, and those added in emulsion form made more homogeneous film morphologies. MCC emulsion enhanced the film strength (40%) and modulus (149%) to the greatest extent, while comprehensively, HPMC emulsion possessed better reinforcement effects on the films, which increased mechanical properties (31% ~ 100%), moisture barrier (20%), oxygen barrier (93%), surface hydrophobicity (20%), as well as water resistance (12% ~ 76%). Findings supported the application of cellulose in high-throughput biodegradable films, and the high-content starch/PBAT blown films reinforced by HPMC emulsion had great potential in commercial packaging fields.

Preparation of octenyl succinylated kappa-carrageenan; reaction optimization, characterization, and application in low-fat vegan mayonnaise

Kappa-carrageenan (KC) esterification reaction with octenyl succinic anhydride was optimized using response surface methodology, leading to the production of a food-based emulsifier. Modified kappa-carrageenan (KC-OSA) with different degrees of substitution (DS) (0.023 and 0.045) was produced, and their functional and structural properties were investigated. The results from FTIR and ¹HNMR verified the successful occurrence of modification. The KC-OSA emulsions with both DS values were utterly stable after 30 days of storage, while KC failed to form emulsions. The viscosity, foaming properties, surface net charge, and gel opacity increased after modification and with an increase in its extent, while emulsion particle size and polydispersity index, gel melting temperature, and gel hardness decreased. Afterward, the KC-OSA (DS = 0.023) potential use was investigated as fat and egg yolk substitute in mayonnaise, which resulted in vegan mayonnaise samples with no phase separation after a month of storage at room temperature. Particle size measurements implied that the particle size of the mayonnaise sample was decreased with an increase in KC-OSA concentration. The results from the sensory evaluation showed that KC-OSA could be successfully implemented in low-fat vegan mayonnaise. The results from this study draw a bright horizon for the use of KC-OSA in the food industry.

The Emergence of Edible and Food-Application Coatings for Food Packaging: A Review

Food packaging was not as important in the past as it is now, because the world has more people but fewer food resources. Food packaging will become more prevalent and go from being a nice-to-have to an essential feature of modern life. Food packaging has grown to be an important industry sector in today's world of more people and more food. Food packaging innovation faces significant challenges in extending perishable food products' shelf life and contributing to meeting daily nutrient requirements as people nowadays are searching for foods that offer additional health advantages. Modern food preservation techniques have two objectives: process viability and safe, environmentally friendly end products. Long-term storage techniques can include the use of edible coatings and films. This article gives a succinct overview of the supplies and procedures used to coat food products with conventional packaging films and coatings. The key findings summarizing the biodegradable packaging materials are emphasized for their ability to prolong the freshness and flavor of a wide range of food items; films and edible coatings are highlighted as viable alternatives to traditional packaging methods. We discuss the safety concerns and opportunities presented by applying edible films and coatings, allowing it to be used as quality indicators for time-sensitive foods.

Characterization and Antifungal Activity of Pullulan Edible Films Enriched with Propolis Extract for Active Packaging

Active pullulan films with the addition of 3, 5 or 10% propolis extract produced by the casting method were tested in the study. Propolis extracts from Bochnia County, Siedlce County and Ełk County (Poland) were used. The appearance of the films was characterized, as well as physical parameters (thickness, moisture content, water solubility), tensile strength (TS), elongation at break (EB), optical characteristics (light transparency, UV barrier, color) and antifungal properties. The antifungal activity of the films was tested by the disc diffusion method against yeast (Candida albicans, C. krusei, Saccharomyces cerevisiae, Rhodotorula mucilaginosa) and mold (Alternaria solani, Fusarium solani, Rhizopus stolonifer, Colletotrichum gloeosporioides, C. cladosporioides, Aspergillus niger, A. ochraceus, Mucor mucedo, Penicillium expansum, P. chrysogenum). The origin of propolis influenced the color and water solubility of the films. The addition of increasing concentrations of propolis extract increased the film thickness and the intensity of the yellow color, extended the water dissolution time of the film and reduced the values of TS and EB. The addition of propolis extract in the pullulan film improved UV radiation protection but decreased light transparency. The antifungal activity increased significantly with the increasing concentration of propolis extract in the film, regardless of the origin of propolis. Molds showed greater sensitivity to pullulan films containing propolis extract than yeasts. In general, films made of pullulan with the addition of propolis extract can be considered as natural active packaging to protect against the growth of fungi in food.

Effects of beeswax emulsified by octenyl succinate starch on the structure and physicochemical properties of acid-modified starchfilms

This work aimed to develop a novel strategy to modulate the distribution of beeswax in acid-modified starch films via tuning octenyl succinate starch (OSS) ratios and to elucidate their structure-property relationships. The apparent viscosity and storage modulus of the film-forming solution decreased with the increase of OSS ratio. Attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy revealed that the hydrogen bond in the film-forming network was cleaved with the presence of OSS. Scanning electron microscope (SEM), atomic force microscope (AFM), and X-ray diffraction (XRD) demonstrated that OSS ratio had an obvious effect on the formation and distribution of beeswax crystal particles. Uniform distribution of beeswax effectively enhanced the hydrophobicity and water barrier properties of films and performed preferable elongation at break but at the expense of tensile strength and optical properties. The films with higher OSS ratio (>12 %) presented higher thermal stability. This study provides new information on the rational design of emulsified films to obtain desirable physicochemical properties by tuning the distribution of beeswax.

Development and Characterization of Pullulan-Carboxymethyl Cellulose Blend Film for Packaging Applications

Edible packaging materials have widespread applications in pharmaceutical industries. In this study, the physical, thermal, colour, mechanical, and water barrier properties of a novel edible film based on pullulan (PUL) and carboxymethyl cellulose (CMC) were investigated. The blend films were made by the solution casting method with 3 g of total solid content. The following percentages of 100/0, 75/25, 50/50, 25/75, and 0/100 were used to prepare the films. Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) were used to analyze the interaction between PUL and CMC. At the level of 75/25 percentage of PUL, CMC film showed the lowest EAB% (5.55%), the highest values for TS (17.30 MPa), WVP value ( $4.12\times {10}^{-10}$  g m-1s-1Pa-1), and water contact angle of 63.43°. By increasing the CMC concentration, blend films became slightly greenish and yellowish but appeared transparent with UV blocking ability. This study reveals that 75/25 (PUL/CMC) blend film has a good potential that can be used in producing edible packaging films to protect the quality of pharmaceutical products with interesting specifications.

Effect of mung bean protein isolate/pullulan films containing marjoram (Origanum majorana L.) essential oil on chemical and microbial properties of minced beef meat

In this study, the effect of marjoram essential oil (MEO) on the mechanical, barrier, antioxidant and antimicrobial properties of mung bean protein isolate (MPI)/pullulan (PU) composite films and its influence on the quality of minced beef meat during 14 days storage at 4 °C was studied. The Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results confirmed the compatibility between components. Also, depend on the different ratios of combination of MEO and MPI/PU, tensile strength (TS) and elongation at break (EAB) were varied. The results showed that an increase in the level of the MPI led to a significant increment in TS and water-proof properties of the composite films. Also, with addition of MEO, the EAB of the antimicrobial blend-films was decreased, while TS and water-proof properties were increased. In addition, enrichment of the films with MEO led to a considerable positive effect on DPPH radical scavenging and antibacterial activity against pathogenic bacteria (Staphylococcus aureus and Escherichia coli). Based on the bacterial and chemical analyses of the minced meat samples, MEO-incorporation in MPI/PU films enhanced oxidative stability of minced beef samples, and also showed effective antimicrobial activity against all of the tested bacteria.

Effect of palm wax on the mechanical, thermal, and moisture absorption properties of thermoplastic cassava starch composites

Thermoplastic starch is a potentially sustainable and biodegradable material. However, it possesses some limitations in terms of mechanical performance and high moisture sensitivity. In this current work, the characteristics of thermoplastic cassava starch (TPCS) containing palm wax at various loading were evaluated. TPCS was prepared via hot pressing by varying the ratios of palm wax (2.5, 5, 10, and 15 wt%). Next, characterization via scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), mechanical, water solubility, thickness swelling and moisture absorption tests, were conducted on the samples. The findings showed that incorporating starch-based thermoplastics with palm wax has remarkably improved mechanical characteristics of the thermoplastic blends. Besides, the morphology of the samples demonstrated irregular and rougher cleavage fracture after palm wax addition. FT-IR indicated the existence of intermolecular interaction between TPCS and palm wax with the intermolecular hydrogen bonds that existed between them. The thermal stability of TPCS has improved with rising palm wax content. The incorporation of 15 wt% palm wax resulted in the lowest moisture absorption value among the samples. Overall, the developed TPCS/palm wax with improved mechanical and moisture resistance characteristics has the potential to be used as biodegradable materials.

Thermoplastic starch/beeswax blend: Characterization on thermal mechanical and moisture absorption properties

Cassava starch has acquired many attentions owing to its ability to be developed as thermoplastic cassava starch (TPCS) where it can be obtained in low cost, making it to be one of alternatives to substitute petroleum-based plastic. An attempt was made to investigate the thermal, mechanical and moisture absorption properties of thermoplastic cassava starch blending with beeswax (TPCS-BW) fabricated using hot moulding compression method in the range of beeswax loading from 0, 2.5, 5 to 10 wt%. Addition of beeswax has significantly reduced tensile strength, elongation and flexural strength while improving tensile modulus and flexural modulus until 5 wt% beeswax. Incorporation of 10 wt% beeswax has successfully produced the lowest value of moisture absorption and water solubility among the bio-composite which might be attributed to the beeswax's hydrophobic properties in improving water barrier of the TPCS-BW bio-composite. Furthermore, the addition of beeswax resulted in the appearance of irregular and rough fractured surface. Meanwhile, fourier transform infrared (FT-IR) spectroscopy presented that incorporation of beeswax in the mixture has considerably improve hydrogen bonding of blends indicating good interaction between starch and beeswax. Hence, beeswax with an appropriate loading value able to improve the functional properties of TPCS-BW bio-composite.

Preparation and Characterization of κ-Carrageenan Modified with Maleic Anhydride and Its Application in Films

In this work, the physicochemical properties of maleic anhydride (MAH)-modified κ-carrageenan (κCar) (MC) were characterized and compared with those of native κ-carrageenan (NC). The Fourier transform infrared spectrum of MC exhibited that κCar was successfully modified. Thermogravimetric analysis indicated that the thermal stability of MC was decreased. When the degree of substitution was 0.032, MC exhibited a low gel strength (759 g/cm²), gelling temperature (33.3 °C), and dehydration rate (60.3%). Given the excellent film-forming ability of κCar, MC films were then prepared and were found to have better mechanical and barrier properties (UV and water) than NC films. With regard to optical properties, MC films could completely absorb UV light in the range of 200–236 nm. The water contact angle of MC films was higher than that of NC films. Moreover, the elongation at break increased from 26.9% to 163%. These physicochemical property changes imply that MC can be employed in polysaccharide-based films.

Development and characterization of aldehyde-sensitive cellulose/chitosan/beeswax colorimetric papers for monitoring kiwifruit maturity

In this study, we developed an in-package colorimetric paper to monitor the ripeness of kiwifruit by detecting the release of aldehydes. Strongly hydrophobic composite films were prepared using chitosan as the matrix and beeswax as an additive. A piece of cellulose paper containing methyl red and bromocresol violet as color indicators was heat-sealed between two hydrophobic films to protect the indicators from the effects of fruit respiration and transpiration. The nucleophilic addition reaction between aldehydes and OH^- (Cannizzaro reaction) changes the pH in the paper and triggers a color change in the indicators. As the kiwifruit ripens, the colorimetric paper changes from bluish-purple to dark red and then gradually to red. A mobile phone application was further used to measure the RGB values and link them to kiwifruit ripeness. This intelligent paper can be used for the accurate and convenient monitoring of produce in real time.

Tea polyphenols (TP): a promising natural additive for the manufacture of multifunctional active food packaging films

As a bioactive extract from tea leaves, tea polyphenols (TP) are safe and natural. Its excellent antioxidant and antibacterial properties are increasingly regarded as a good additive for improving degradable food packaging film properties. This article comprehensively reviewed the functional properties of active films containing TP developed recently. The effects of TP addition to enhancing active food packaging films' performance, including thickness, water sensitivity, barrier properties, color, mechanical properties, antioxidant, antibacterial, and intelligent discoloration properties, were discussed. Besides, the practical applications in food preservation of active films containing TP are also discussed. This work concluded that the addition of TP could impart antioxidant and antibacterial properties to active packaging films and act as a crosslinking agent to improve other physical and chemical properties of the film, such as mechanical and barrier properties. However, the effect of TP on specific properties of the active packaging film is complex, and the appropriate TP concentration needs to be selected according to the type of film matrix and the interaction between the components. Notably, the addition of TP improved the efficiency of the active packaging film in food preservation applications, which accelerates the process of replacing the traditional plastic-based food packaging with active packaging film.