Surface coating of chitosan of different degree of acetylation on non surface sized writing and printing grade paper

A review on the application of chitosan-based polymers in liver tissue engineering

Chitosan-based polymers have enormous structural tendencies to build bioactive materials with novel characteristics, functions, and various applications, mainly in liver tissue engineering (LTE). The specific physicochemical, biological, mechanical, and biodegradation properties give the effective ways to blend these biopolymers with synthetic and natural polymers to fabricate scaffolds matrixes, sponges, and complexes. A variety of natural and synthetic biomaterials, including chitosan (CS), alginate (Alg), collagen (CN), gelatin (GL), hyaluronic acid (HA), hydroxyapatite (HAp), polyethylene glycol (PEG), polycaprolactone (PCL), poly(lactic-co-glycolic) acid (PGLA), polylactic acid (PLA), and silk fibroin gained considerable attention due to their structure-properties relationship. The incorporation of CS within the polymer matrix results in increased mechanical strength and also imparts biological behavior to the designed PU formulations. The significant and growing interest in the LTE sector, this review aims to be a detailed exploration of CS-based polymers biomaterials for LTE. A brief explanation of the sources and extraction, properties, structure, and scope of CS is described in the introduction. After that, a full overview of the liver, its anatomy, issues, hepatocyte transplantation, LTE, and CS LTE applications are discussed.

Effect of chitosan-based bio coating on mechanical, structural and physical characteristics of microfiber based paper packaging: An alternative to wood pulp/plastic packaging

Limnocharis flava is a noxious aquatic weed that poses a threat to paddy cultivation. The high cellulose and low lignin contents in this plant make it a potential raw material for papermaking. Against this backdrop, this study was taken up to develop Limnocharis flava (LF) based sheets containing natural fibres from Banana (B), Pineapple (P), and Rice Straw (RS) as reinforcing agents. The influence of carboxymethyl cellulose (CMC) as a binder on the LF-based sheets was also studied. To enhance the mechanical and moisture resistance properties, a chitosan coating was provided to the sheets. Analytical tests for mechanical properties, water barrier properties, functional groups, structure and microstructure, thermal properties and biodegradability were performed. Among the samples, LF + B showed the highest tensile strength (34.86 Mpa) and bursting strength (13.055 kg/cm2), while LF + R had higher puncture and tearing strengths. Chitosan coating was found to enhance the sheets and improve the water barrier properties mechanically. The contact angle of LF + B increased from 91.6° to 110.65°, while the water vapour transmission rate of LF reduced from 532.18 to 404.47 on providing chitosan coating. The significant interactions of reinforcing agents were confirmed by the results of FTIR and that of the coating by the SEM micrographs. The LF-based sheets were also found to have decent thermal stability. The high value of the crystallinity index in LF + R samples supported their remarkable mechanical properties. This study proclaims the notable suitability of Limnocharis flava in manufacturing paper for packaging applications.

Extensive Characterization of Alginate, Chitosan and Microfibrillated Cellulose Cast Films to Assess their Suitability as Barrier Coating for Paper and Board

The vast amount of synthetic polymers used in packaging is putting a strain on the environment and is depleting finite, non-renewable raw materials. Abundantly available biopolymers such as alginate, chitosan and microfibrillated cellulose (MFC) have frequently been suggested in the literature to replace synthetic polymers and their barrier properties have been investigated in detail. Many studies aim to improve the properties of standalone biopolymer films. Some studies apply these biopolymers as barrier coatings on paper, but the solids content in most of these studies is quite low, which in turn would result in a high energy demand in industrial drying processes. The aim of this study is to suggest a laboratory procedure to investigate the suitability of these biopolymers at higher and such more industrially relevant solids content as potential coating materials for paper and board in order to improve their barrier properties. First, biopolymer solutions are prepared at a high solids content at which the viscosity at industrially relevant higher shear rates of 50,000 s-1 (1000 s-1 for MFC) is in the same range as a synthetic reference material (in this case ethylene vinyl alcohol EVOH) at 10 wt%. These solutions are analyzed regarding properties such as rheology and surface tension that are relevant for their coatability in industrial coating processes. Then, free-standing films are cast, and the films are characterized regarding important properties for packaging applications such as different surface, mechanical and barrier properties. Based on these results suitable biopolymers for future coating trials can be easily identified.

A comprehensive review of chitosan applications in paper science and technologies

Using environmentally friendly biomaterials in different aspects of human life has been considered extensively. In this respect, different biomaterials have been identified and different applications have been found for them. Currently, chitosan, the well-known derivative of the second most abundant polysaccharide in the nature (i.e., chitin), has been receiving a lot of attention. This unique biomaterial can be defined as a renewable, high cationic charge density, antibacterial, biodegradable, biocompatible, non-toxic biomaterial with high compatibility with cellulose structure, where it can be used in different applications. This review takes a deep and comprehensive look at chitosan and its derivative applications in different aspects of papermaking.

Development of high-capacity surface-engineered MXene composite for heavy metal Cr (VI) removal from industrial wastewater

The substantial quantity of Cr(VI) contaminants in the aqueous atmosphere is a major environmental fear that cannot be overlooked. For the first time, MXene and chitosan-coated polyurethane foam have been employed for wastewater treatment, including heavy metal ions (Cr (VI)) through a fixed-bed column study. It is also the most inexpensive, lightweight, and globally friendly material tested. The Mxene and chitosan-coated polyurethane foam hybrid materials were thoroughly investigated using FTIR (Fourier transform infrared), SEM (scanning electron microscope), XPS (X-ray photoelectron spectroscopy) and XRD (X-ray diffraction). The presence of the rough surface and the pore creation in the Mxene- MX₃@CS₃@PUF should rise its surface area, which is useful to interact the surface-active assembly of MX₃@CS₃@PUF and the Cr(VI) contaminations in the aqueous solution. With the help of the ion exchange mechanism and electrostatic contact, negatively charged MXene hexavalent ions were being adsorbed on the surface. MXene and chitosan have been coated on PUF foam in the form of three different layers, which shows the highest adsorption capacity, where up to ∼70% Cr (VI) was removed in the first 10 min and more than 60% elimination after 3 h when the metal ion concentration was 20 ppm. The electrostatic interaction between the negative charge MXene and the positive charge chitosan on the surface of PUF, which was absent in MX@PUF, is accountable for the high removal efficiency. This was done through a sequence of fixed-bed column studies, which took place in the continuous flowing of wastewater.

Chitosan: Sources, Processing and Modification Techniques

Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is derived from chitin. Chitin is found in cell walls of crustaceans, fungi, insects and in some algae, microorganisms, and some invertebrate animals. Chitosan is emerging as a very important raw material for the synthesis of a wide range of products used for food, medical, pharmaceutical, health care, agriculture, industry, and environmental pollution protection. This review, in line with the focus of this special issue, provides the reader with (1) an overview on different sources of chitin, (2) advances in techniques used to extract chitin and converting it into chitosan, (3) the importance of the inherent characteristics of the chitosan from different sources that makes them suitable for specific applications and, finally, (4) briefly summarizes ways of tailoring chitosan for specific applications. The review also presents the influence of the degree of acetylation (DA) and degree of deacetylation (DDA), molecular weight (M_w) on the physicochemical and biological properties of chitosan, acid-base behavior, biodegradability, solubility, reactivity, among many other properties that determine processability and suitability for specific applications. This is intended to help guide researchers select the right chitosan raw material for their specific applications.

O-ATRP synthesized poly(β-pinene) blended with chitosan for antimicrobial and antioxidant bio-based films production

Antioxidant and antimicrobial activities are important characteristics of active film packaging designed to extend food preservation. In this study, functional bio-based films were produced using different concentrations of antioxidant poly(β-pinene) bio-oligomer synthesized via organocatalyzed atom transfer radical polymerization (O-ATRP) and blended with chitosan of different molecular weights. The structural, mechanical, thermal, solubility, antioxidant, and antimicrobial properties of the films were investigated. The poly(β-pinene)-chitosan blends presented significant pores and irregularities with the increase of poly(β-pinene) concentration over 30%. Chitosan molecular weight did not show any important influence in the physical properties of the blends. Poly(β-pinene) load decreased the materials' tensile strength and melting temperature, exhibiting a plasticizing effect on chitosan chains. The antioxidant and antimicrobial activities of the films were improved by poly(β-pinene) incorporation and mainly depended on its concentration. Therefore, the incorporation of poly(β-pinene) in chitosan films can be an alternative for active packaging production.

Green Synthesis of A Novel MXene–CS Composite Applied in Treatment of Cr(VI) Contaminated Aqueous Solution

The considerable amount of Cr(VI) pollutants in the aqueous environment is a significant environmental concern that cannot be ignored. A series of novel Mxene–CS inorganic–organic composite nanomaterials synthesized by using the solution reaction method was applied to treat the Cr(VI) contaminated water. The Mxene–CS composites were characterized through SEM (scanning electron microscope), XRD (X–ray diffraction), XPS (X–ray photoelectron spectroscopy), and FTIR (Fourier transform infrared). The XRD patterns (observed at 2θ of 18.1°, 35.8°, 41.5°, and 60.1°) and the FT–IR spectra (-NH2 group for 1635 and 1517 cm−1, and -OH group for 3482 cm−1) illustrated that CS was successfully loaded on the Mxene. The effects of solution pH, the dosage of Mxene–CS, and duration time on the adsorption of Cr(VI) by synthesized Mxene–CS were investigated. The removal efficiency of Cr(VI) was increased from 12.9% to 40.5% with Mxene–CS dosage ranging from 0.02 to 0.12 g/L. The adsorption process could be well fitted by the pseudo–second–order kinetics model, indicating chemisorption occurred. The Langmuir isotherm model could be better to describe the process with a maximum adsorption capacity of 43.1 mg/g. The prepared novel Mxene–CS composite was considered as an alternative for adsorption of heavy metals from wastewater.