Controlled release of dinotefuran with temperature/pH-responsive chitosan-gelatin microspheres to reduce leaching risk during application

Tailored synthesis of pH-responsive biodegradable microcapsules incorporating gelatin, alginate, and hyaluronic acid for effective-controlled release

In response to escalating environmental concerns and the urgent need for sustainable drug delivery systems, this study introduces biodegradable pH-responsive microcapsules synthesized from a blend of gelatin, alginate, and hyaluronic acid. Employing the coacervation process, capsules were created with a spherical shape, multicore structure, and small sizes ranging from 10 to 20 μm, which exhibit outstanding vitamin E encapsulation efficiency. With substantial incorporation of hyaluronic acid, a pH-responsive component, the resulting microcapsules displayed noteworthy swelling behavior, facilitating proficient core ingredient release at pH 5.5 and 7.4. Notably, these capsules can effectively deliver active substances to the dermal layer under specific skin conditions, revealing promising applications in topical medications and cosmetics. Furthermore, the readily biodegradable nature of the designed capsules was demonstrated through Biochemical Oxygen Demand (BOD) testing, with over 80 % of microcapsules being degraded by microorganisms after one week of incubation. This research contributes to the development of responsive microcapsules and aligns with broader environmental initiatives, offering a promising pathway to mitigate the impact of microplastics while advancing various applications.

Fabrication and property of the avermectin-attapulgite composites regulated by mixed-surfactants and sodium alginate

OA-AP, DTAB-AP, DDBAB-AP complexes were synthesized by introducing surfactants of OA, DTAB and DDBAB into attapulgite (AP). The complexes were systematically characterized. The appearance of new diffraction peaks at low angle indicated a new lamellar structure of OA (DTAB, DDBAB)-AP complexes. Then, the pesticide avermectin (AV) composites of AV/DTAB-OA-AP, AV/DDBAB-OA-AP, sodium alginate (SA) @AV/DTAB-OA-AP and SA@AV/DDBAB-OA-AP were prepared and investigated detailedly. The basal spacings of AV/DTAB-OA-AP and AV/DDBAB-OA-AP were bigger than those of OA-AP and DTAB(DDBAB)-AP. The existences of AV, surfactants and SA molecules of the composites were further confirmed. Furthermore the effect of SA on AV release behaviors of SA@AV/DTAB (DDBAB)-OA-AP microspheres was investigated and compared. Compared to AV/DTAB (DDBAB)-OA-AP, the released rate of the microspheres decreased remarkably. The AV release behaviors of AV/DTAB (DDBAB)-OA-AP could be fitted with pseudo second-order model, while the first-order model was better to describe those of the microspheres. Finally, the bioassay of the microspheres were studied and analyzed. The microspheres had a longer duration and control effect on Mythimna separata. This study could be helpful to provide a pesticide delivery system to improve the utilization efficiency of pesticides.

Controlled delivery of 5-fluorouracil from monodisperse chitosan microspheres prepared by emulsion crosslinking

This work aims to determine the optimal conditions for emulsion cross-linking of chitosan (CHS) with various molecular weights using glutaraldehyde as a cross-linking agent to produce 5-fluorouracil-loaded CHS microspheres (5-FU/CHS). Their drug loading and encapsulation efficiencies are found to be in the range of 3.87-12.35% and 20.13-70.45%, respectively. The dynamic light scattering results show that 5-FU/CHS microspheres are micron-sized with a uniform size distribution, and the scanning electron microscopy results show that they are spherical. The results of thermogravimetric analysis, X-ray diffraction, and Fourier transform infrared spectroscopy demonstrate that 5-FU is successfully incorporated into the microspheres. The in vitro release tests show that 5-FU/CHS have a prolonged, pH-responsive release pattern of 5-FU, and the cumulative release rate under acidic condition is much larger than that under neutral conditions. The drug release kinetic analysis further demonstrates that the release of 5-FU can be well described by the Fickian diffusion model.

Ecotoxicological impact of dinotefuran insecticide and its metabolites on non-targets in agroecosystem: Harnessing nanotechnology- and bio-based management strategies to reduce its impact on non-target ecosystems

The class of insecticides known as neonicotinoid insecticides has gained extensive application worldwide. Two characteristics of neonicotinoid pesticides are excellent insecticidal activity and a wide insecticidal spectrum for problematic insects. Neonicotinoid pesticides can also successfully manage pest insects that have developed resistance to other insecticide classes. Due to its powerful insecticidal properties and rapid plant absorption and translocation, dinotefuran, the most recent generation of neonicotinoid insecticides, has been widely used against biting and sucking insects. Dinotefuran has a wide range of potential applications and is often used globally. However, there is growing evidence that they negatively impact the biodiversity of organisms in agricultural settings as well as non-target organisms. The objective of this review is to present an updated summary of current understanding regarding the non-target effects of dinotefuran; we also enumerated nano- and bio-based mitigation and management strategies to reduce the impact of dinotefuran on non-target organisms and to pinpoint knowledge gaps. Finally, future study directions are suggested based on the limitations of the existing studies, with the goal of providing a scientific basis for risk assessment and the prudent use of these insecticides.

Low-molecular-weight organic acids-mediated transport of neonicotinoid pesticides through saturated soil porous media: Combined effects of the molecular structures of organic acids and the chemical properties of contaminants

Empirical information about the transport properties of neonicotinoid pesticides through the soil as affected by the ubiquitous low molecular weight organic acids (LMWOAs) is lacking. Herein, the impacts of three LMWOAs with different molecular structures, including citric acid, acetic acid, and malic acid, on the mobility characteristics of two typical neonicotinoid pesticides (Dinotefuran (DTF) and Nitenpyram (NTP)) were explored. Interestingly, under acidic conditions, different mechanisms were involved in transporting DTF and NTP by adding exogenous LMWOAs. Concretely, acetic acid and malic acid inhibited DTF transport, ascribed to the enhanced electrostatic attraction between DTF and porous media and the additional binding sites provided by the deposited LMWOAs. However, citric acid slightly enhanced DTF mobility due to the fact that the inhibitory effect was weakened by the steric hindrance effect induced by the deposited citric acid with a large molecular size. In comparison, all three LMWOAs promoted NTP transport at pH 5.0. Because the interaction between NTP with soil organic matter (e.g., via π-π stacking interaction) was masked by the LMWOAs coating on soil surfaces. Nevertheless, LMWOAs could promote the mobility of both neonicotinoid pesticides at pH 7.0 due to the steric hindrance effect caused by the deposited organic acids and the competitive retention between LMWOAs and pesticides for effective surface deposition sites of soil particles. Furthermore, the extent of the promotion effects of LMWOAs generally followed the order of citric acid > malic acid > acetic acid. This pattern was highly related to their molecular structures (e.g., number and type of functional groups and molecular size). Additionally, when the background solutions contained Ca2+, the bridging effect of cations also contributed to the transport-enhancement effects of LMWOAs. The findings provide valuable information about the mobility behaviors of neonicotinoid pesticides co-existing with LMWOAs in soil-water systems.

Ecofriendly polysaccharide-based alginate/pluronic F127 semi-IPN hydrogel with magnetic collectability for precise release of pesticides and sustained pest control

Controlled-release systems are crucial for efficient pesticide utilization and environmental protection in agricultural production. The utilization of polysaccharide-based materials derived from biopolymers as carriers for controlling pesticide release holds significant potential. In this work, a reversible near infrared-responsive polysaccharide-based hydrogel (RNPH) was fabricated by employing a semi-interpenetrating polymer network (alginate-FeIII/pluronic F127) as a carrier to encapsulate Fe3O4@polydopamine (FP) and emamectin benzoate (EB)-loaded hollow mesoporous silica. The incorporation of FP into the RNPH introduced a photothermal effect, enabling the precise release of EB through reversible shrinkage of the hydrogel upon NIR irradiation. Additionally, the presence of magnetic Fe3O4 in the system facilitated the rapid removal of remaining RNPH from the environment using a magnet, reducing EB residue. Importantly, RNPH exhibited exceptional controlled-release performance and could be reused for at least 4 cycles. Furthermore, the anti-photolysis ability of EB protected by RNPH was enhanced by 4.8 times compared to EB alone. Moreover, RNPH significantly improved the adhesion of EB to foliar surfaces, thereby reducing the loss of EB while ensuring crop safety. Therefore, the polysaccharide-based hydrogel holds promise as a versatile carrier for the precise release of EB, offering valuable applications in enhancing pesticide bioavailability and promoting environmental safety.

Interfacial Polymerization Depth Mediated by the Shuttle Effect Regulating the Application Performance of Pesticide-Loaded Microcapsules

The highly water-soluble nematicide fosthiazate is anticipated to undergo microencapsulation in order to enhance its retention around plant roots and mitigate leaching into groundwater. However, the underlying mechanism governing the influence of hydrophilicity of the microcapsule (MC) core on the evolution of the microcapsule shell remains unclear, posing challenges for encapsulating water-soluble core materials. This study elucidates the microlevel formation mechanism of microcapsules by investigating the impact of interfacial mass transfer on shell formation and proposes a method for regulating the structure of shells. The study reveals that enhancing the hydrophilicity of the core enhances the shuttle effect between the oil and aqueous phase, expands the region of polymerization reactions, and forms a loose and thick shell. The thickness of the microcapsule shell prepared using solvent oil 150# (MCs-SOL) measures only 264 nm, while that of the microcapsules prepared using propylene glycol diacetate and solvent oil 150# at a ratio of 2:1 (MCs-P2S1) is 5.2 times greater. The enhanced compactness of the shell reduced the release rate of microcapsules and the leaching distance of fosthiazate in soil, thereby mitigating the risk of leaching loss and facilitating the distribution of active ingredients within crop roots. The MCs-SOL had a limited leaching distance measurement of 8 cm and exhibited a satisfactory efficacy of 87.3% in controlling root galling nematodes. The thickness and compactness of the MCs shell can be regulated by manipulating the interfacial shuttle effect, providing a promising approach to enhancing utilization efficiency while mitigating potential environmental risks.

Effect of sodium alginate-gelatin-polyvinyl pyrrolidone microspheres on cucumber plants, soil, and microbial communities under lead stress

Lead is highly persistent and toxic in soil, hindering plant growth. Microspheres are a novel, functional, and slow-release preparation commonly used for controlled release of agricultural chemicals. However, their application in the remediation of Pb-contaminated soil has not been studied; furthermore, the remediation mechanism involved has not been systematically assessed. Herein, we evaluated the Pb stress mitigation ability of sodium alginate-gelatin-polyvinyl pyrrolidone composite microspheres. Microspheres effectively attenuated the Pb toxic effect on cucumber seedlings. Furthermore, they boosted cucumber growth, increased peroxidase activity, and chlorophyll content, while reducing malondialdehyde content in leaves. Microspheres promoted Pb enrichment in cucumber, especially in roots (about 4.5 times). They also improved soil physicochemical properties, promoted enzyme activity, and increased soil available Pb concentration in the short term. In addition, microspheres selectively enriched functional (heavy metal-tolerating and plant growth promoting) bacteria to adapt to and resist Pb stress by improving soil properties and nutrients. These results indicated that even a small amount (0.025-0.3 %) of microspheres can significantly reduce the adverse effects of Pb on plants, soil, and bacterial communities. Composite microspheres have shown great value in Pb remediation, and their application potential in phytoremediation is also worth evaluating to expand the application.

Research Progress of a Pesticide Polymer-Controlled Release System Based on Polysaccharides

In recent years, with the development of the nanomaterials discipline, many new pesticide drug-carrying systems-such as pesticide nano-metal particles, nano-metal oxides, and other drug-carrying materials-had been developed and applied to pesticide formulations. Although these new drug-loading systems are relatively friendly to the environment, the direct exposure of many metal nanoparticles to the environment will inevitably lead to potential effects. In response to these problems, organic nanomaterials have been rapidly developed due to their high-quality biodegradation and biocompatibility. Most of these organic nanomaterials were mainly polysaccharide materials, such as chitosan, carboxymethyl chitosan, sodium alginate, β-cyclodextrin, cellulose, starch, guar gum, etc. Some of these materials could be used to carry inorganic materials to develop a temperature- or pH-sensitive pesticide drug delivery system. Herein, the pesticide drug-carrying system developed based on polysaccharide materials, such as chitosan, was referred to as the pesticide polymer drug-carrying system based on polysaccharide materials. This kind of drug-loading system could be used to protect the pesticide molecules from harsh environments, such as pH, light, temperature, etc., and was used to develop the function of a sustained release, targeted release of pesticides in the intestine of insects, and achieve the goal of precise application, reduction, and efficiency of pesticides. In this review, the recent progress in the field of polysaccharide-based polymer drug delivery systems for pesticides has been discussed, and suggestions for future development were proposed based on the current situation.

Carboxymethyl β-cyclodextrin grafted hollow copper sulfide@mesoporous silica carriers for stimuli-responsive pesticide delivery

Stimuli-responsive controlled release systems have received extensive attention to improve the pesticide bioavailability and minimize environmental pollution. Herein, a multiple stimuli-responsive IMI@HCuS@mSiO₂ @ -ss-CβCD delivery system was constructed using modified carboxymethyl β-cyclodextrin (CβCD-ss-COOH) as sealing materials, hollow copper sulfide nanoparticles with amino-functionalized mesoporous silica shell (HCuS@mSiO₂-NH₂) as carriers and imidacloprid (IMI) as the model drug. The cavity structure of HCuS@mSiO₂-NH₂ would provide a large space for pesticide loading. The results revealed that HCuS@mSiO₂-ss-CβCD was approximately 230 nm in size and the loading efficiency for IMI was 25.7%, and exhibited better biosafety on bacteria and seed. HCuS carriers were also served as photothermal agent and possessed high photothermal conversion effect (η = 38.4%). IMI@HCuS@mSiO₂ @ -ss-CβCD displayed excellent foliage adhesion and multiple stimuli-responsive release properties to pH, α-amylase, GSH, and NIR. The photostability of IMI embedded in CuS@mSiO₂ @ -ss-CβCD was approximately 10 times that of IMI solution. This work provides an efficient nanoplatform for realizing pesticide delivery.

Polydopamine-encapsulated cap-like mesoporous silica based delivery system for responsive pesticide release and high retention

Nanopesticides formulation has been applied in modern agriculture, but the effective deposition of pesticides on plant surfaces is still a critical challenge. Here, we developed a cap-like mesoporous silica (C-mSiO₂) carrier for pesticide delivery. The C-mSiO₂ carriers with surface amino groups present uniform cap-like shape and have an mean diameter of 300 nm and width of 100 nm. This structure would reduce the rolling and bouncing of carriers on plant leaves, leading to improving the foliage deposition and retention. After loading dinotefuran (DIN), polydopamine (PDA) was used to encapsulate the pesticide (DIN@C-mSiO₂@PDA). The C-mSiO₂ carriers exhibit high drug loading efficiency (24.7%) and benign biocompatibility on bacteria and seed. Except for pH/NIR response release, the DIN@C-mSiO₂@PDA exhibited excellent photostability under UV irradiation. Moreover, the insecticidal activity of DIN@C-mSiO₂@PDA was comparable to that of pure DIN and DIN commercial suspension (CS-DIN). This carrier system has the potential for improving the foliage retention and utilization of pesticides.

Preparation and evaluation of attractive microspheres for control of Agrilus planipennis fairmaire

Agrilus planipennis Fairmaire is an important wood boring pest of Fraxinus species in the family Oleaceae. Oxacyclotridecan-2-one is an attractant of A. planipennis. Traps with attractive lures can be used in mass trapping of insect pests, but the traps are a bit expensive and they must be set up and dismantled in the field. To develop an attract and kill method for A. planipennis, we enveloped oxacyclotridecan-2-one into sustained-released microspheres. The attractant microspheres were prepared using the solvent evaporation method. An orthogonal test L₁₆(4⁵) was used to optimize the five preparation factors: the quantities of polylactic acid (PLA), gelatin, Polyvinyl alcohol (PVA), attractant, and the rotational speed. The results showed that optimal conditions for preparation of microspheres were 2.5 g PLA, 0.5 g gelatin, 1.25 g PVA, 2 mL attractant and 600 r min^-1 rotational speed. The encapsulation efficiency of the prepared microspheres was 95.22%, and the attractant loading rate was 15.61%. The release rate of attractant from prepared microspheres was about 26.74% on the first day, and then gradually entered a sustained-release stage for about 10 days that lasted for 17 days. Preliminary field control experiments showed that the prepared microspheres could attract and kill A. planipennis adults when sprayed together with insecticide.

Sodium alginate-based composite microspheres for controlled release of pesticides and reduction of adverse effects of copper in agricultural soils

Excessive copper (Cu) concentrations pose significant health risks to both plants and humans. In this study, sodium alginate (SA)-gelatin (GEL)-polyvinyl pyrrolidone (PVP)- embedded dinotefuran (DIN) microspheres were prepared using spray-drying technology. The loading content and encapsulation efficiency of optimal microspheres determined by physical modifications were 19.77% and 99.32%, respectively. In addition, the microspheres showed variable stimuli-responsive controlled release capacities in different temperatures and types of soil, as well as showed better control efficiency of larvae of Protaetia brevitarsis at pesticide application in the early stage, with the potential ability to control pest outbreaks at high temperatures. In addition, blank microspheres improved the growth and physiological activity of cucumber seedlings, reduced copper content in leaves, increased soil nutrient content, and prevented soil acidification. Further, the use of blank microspheres increased the relative abundance of soil beneficial functional bacteria communities, which mediate heavy metal (HM) immobilization/tolerance and promote plant growth. Redundancy analysis (RDA) and Spearman correlation analysis showed that these beneficial functional bacteria were mainly positively correlated with soil EC, A-N, and N-N. In summary, this study showed that the technique of combining physically modified carrier materials with pesticides has the potential to reduce Cu contamination in the surrounding agricultural soil during pesticide application, thereby reducing Cu uptake by crops.