Gelation behavior and mechanism of Nicandra physalodes (Linn.) Gaertn. seeds pectin induced by Glucono-delta-lactone

Effect of high-pressure-homogenisation on the interaction between pomegranate peel pectin fractions and anthocyanins in acidic environment

In this study, changes in the basic composition and structural characterisation of water-soluble pectin (WSP), homogalacturonan (HG) and rhamnogalacturonan-I (RG-I) from pomegranate peel were investigated after high-pressure-homogenisation (HPH) at 50 MPa and 300 MPa. The interactions between three pectin and anthocyanin (ACN) complex were also studied. The three pectin fractions were mainly composed of galacturonic acid (34.95%-87.69%), all with low degrees of methyl-esterification ≤41.20%. HPH at 300 MPa increased the binding ratios of ACN to three pectin fractions by 34.22%-34.59%. Changes in the structural characterisation results of pectin confirmed that the depolymerisation and breakdown of the side chains of pectin after HPH promoted electrostatic interactions, hydrogen bond and hydrophobic interaction between pectin and ACN. Correspondingly, the thermal and storage stabilities of ACN in the complex was boosted after HPH at 300 MPa. This study provides insights into the interaction between pectin and ACN under HPH.

High internal phase Pickering emulsions stabilized by egg yolk-carboxymethyl cellulose as an age-friendly dysphagia food: Tracking the dynamic transition from co-solubility to coacervates

Although protein-polysaccharide complexes with different phase behaviors all show potential for stabilizing high internal phase Pickering emulsions (HIPPEs), it is not clarified which aggregation state is more stable and age-friendly. In this study, we investigated and compared the stability and age friendliness of HIPPEs stabilized with egg yolk and carboxymethyl cellulose (EYCMC) in different phase behaviors. The results revealed differences in particle size, aggregation state, charge potential, and stability of secondary and tertiary structures of EYCMC. The behavior of EYCMC at the oil-water interface was mainly divided into three phases: rapid diffusion, permeation, and reorganization. The electrostatic interaction, kinetic hindrance, and depletion attraction were the mechanisms primarily involved in stabilizing HIPPEs by EYCMC. Rheological analysis results indicated that HIPPEs had excellent viscoelasticity, structural recovery properties and yield stress. HIPPEs were used in 3D printing, electronic nose testing, IDDSI testing and in vitro digestive simulations for the elderly, demonstrating a fine appearance, safe consumption and bioaccessibility of β-carotene. Soluble complexes showed the best stability and age friendliness compared to other aggregated forms. This study serves as a foundational source of information for developing innovative foods utilizing HIPPEs.

Higher molecular weight pectin inhibits ice crystal growth and its effect on the microstructural and physical properties of pectin cryogels

Understanding the formation of ice crystals is essential for tailoring the microstructure and physical properties of cryogels. This study investigated the effects and mechanisms of pectin molecular weight (Mw) on impacting ice crystal formation. Pectin fractions various Mw (10.13-212.20 kDa) were prepared by hydrothermal method. The solution of high Mw pectin fractions exhibited higher contact angle, lower water freedom, and stronger adsorption of water molecules. The splat experiment and molecular dynamic (MD) results confirmed that higher Mw pectin have stronger ice crystal growth inhibition activity than lower Mw pectin. Furthermore, the pore size distribution of the cryogel increased from 98-203 μm to 105-267 μm as the molecular weight decreased from 212.2 kDa to 121.0 kDa. Additionally, in the higher Mw pectin cryogel, stronger mechanical strength was observed. These findings suggested that changing the molecular weight of pectin has the potential to regulate the ice crystal growth, microstructure and physical properties of frozen products.

Carboxymethylcellulose-induced depletion attraction to stabilize high internal phase Pickering emulsions for the elderly: 3D printing and β-carotene delivery

In this study, a carboxymethylcellulose (CMC) induced depletion attraction was developed to stabilize high internal phase Pickering emulsions (HIPPEs) as age-friendly 3D printing inks. The results demonstrated that depletion force induced the adsorption of yolk particles at the droplet interface and the formation of osmotic droplet clusters, thereby increasing the stability of HIPPEs. In addition, the rheological properties and nutrient delivery properties of HIPPEs could be adjusted by the mass ratio of yolk/CMC. The HIPPEs stabilized at yolk/CMC mass ratio 20:7.5 showed optimal printability, viscoelastic, structural recovery, and swallowability. HIPPEs have been applied to 3D printing, International Dysphagia Dietary Standardization Initiative (IDDSI) test, and in vitro digestive simulation in the elderly, indicating their attractive appearance, safe swallowability, and enhanced bioaccessibility of β-carotene. Our work provides new ideas for developing age-friendly foods with plasticity and nutrient delivery capacity by depletion attraction stabilizing HIPPEs.

Ficus awkeotsang Makino pectin in acidic environments: Insights into pectin structure, gelation behavior, and gel properties

This study demonstrated the gelation capacity, gelation behavior, and mechanism of Ficus awkeotsang Makino pectin (JFSP) in acidic media (pH 3.4-4.5). JFSP exhibited an extraordinary ability to spontaneously form a gel at a low polymer concentration (0.3 %, w/v) within the pH range of 3.75-4.05 at room temperature, without the need to introduce exogenous metal ions or co-solutes. Analysis of zeta potential and carboxyl dissociation extent revealed the protonation of free carboxyl groups within JFSP under acidic conditions. Atomic force microscopy and small angle X-ray scattering elucidated the aggregation morphology and folding conformation of JFSP. At pH 3.8, the correlation length (ξ) of JFSP chains decreased to around 1.67 nm. Rheological experiments confirmed the formation of a stronger gel network at pH 3.8 and 4.0, with good thermal and freeze-thaw stability. Isothermal Titration Calorimetry (ITC), temperature sweeps, and gelation force analyses emphasized the pivotal role of hydrogen bonds in JFSP gels at pH 3.8 and 4.0. Further reducing the pH to 3.4-3.6 disrupted the dynamic equilibrium of gel-driving forces, leading to the formation of a flocculated gel network. These findings deepen our understanding of JFSP behavior in low-acid conditions, which may be useful for further food formulations at these conditions.

Exploring the Transmembrane Behaviors of Dietary Flavonoids under Intestinal Digestive Products of Different Lipids: Insights into the Structure-Activity Relationship In Vitro

This study aimed to investigate the transmembrane transport behavior and structure-activity relationships of various dietary flavonoids in the presence of dietary lipids derived from different sources in vitro. Results revealed that the digestion products of soybean oil (SOED) and lard (LOED) augmented the apparent permeability coefficients of most dietary flavonoids, and SOED exhibited higher transport compared with LOED. The structural properties of flavonoids and the potential interactions between fatty acids in these digestion products and flavonoids may influence the outcomes. 3D quantitative structure-activity relationship analyses revealed that incorporating small-volume groups at position 8 of the A-ring augmented the transmembrane transfer of flavonoids in the LOED system compared with the control group. By contrast, the integration of hydrophobic groups at position 5 of the A-ring and hydrogen bonding acceptor groups at position 6 of the A-ring enhanced the transmembrane transportation of flavonoids in the SOED system. Molecular dynamics simulations revealed that the SOED system may facilitate the interactions with flavonoids to form more stable and compact fatty acid-flavonoid complexes compared to the LOED system. These findings may provide valuable insights into flavonoid absorption to facilitate the development and utilization of functional foods or dietary supplements based on dietary flavonoids.

Effect of localized electrochemical pH and temperature synergistic modification on the structural and antibacterial properties of pectin/polyvinyl alcohol/zinc oxide nanorod films

Two low-methoxy pectins (LMPs) were obtained by local electrochemical pH modification using an H-type double-layer water bath sealed electrochemical cell at the voltage of 180 V for 3 h. The weight-average molecular weight (Mw) of citrus peel pectin (CPP) prepared in the anodic part at room temperature (CPP-A5/RT) and in the cathodic part at 5 °C (CPP-C5/RT) were 346 kDa and 328 kDa, respectively, and the degrees of methylation (DM) were 36.8 % and 11.9 %. Moreover, the second-order kinetic model was most appropriate for the degradation processes, as free radicals were generated in the anodic part and β-elimination occurred in the cathodic part. Subsequently, CPP-A5/RT and CPP-C5/RT were utilized to fabricate food packaging film blending with polyvinyl alcohol (PVA), bcZnO (ZnO coupled with bentonite and colophony) nanorods, and Ca2+ ions by casting method. Then the prepared films were studied for their ability to maintain the freshness of strawberries. The addition of Ca2+ ions and bcZnO nanorods increased the thickness, water contact angle (WCA), and mechanical properties of the composite films, while decreased water vapor permeability (WVP). Therefore, the CPP-based films, supplemented with bcZnO nanorods and crosslinked with Ca2+ ions by "egg-box" model, can serve as an antibacterial food packaging material for food preservation.

Insights into the Acid-Induced Gelation of Original Pectin from Potato Cell Walls by Gluconic Acid-δ-Lactone

The acid-induced gelation of pectin in potato cell walls has been gradually recognized to be related to the improvement in the cell wall integrity after heat processing. The aim of this study was to characterize the acid-induced gelation of original pectin from a potato cell wall (OPP). Rheological analyses showed a typical solution-sol-gel transition process of OPP with different additions of gluconic acid-δ-lactone (GDL). The gelation time (Gt) of OPP was significantly shortened from 7424 s to 2286 s. The complex viscosity (η*) of OPP gradually increased after 4000 s when the pH was lower than 3.13 and increased from 0.15 to a range of 0.20~6.3 Pa·s at 9000 s. The increase in shear rate caused a decrease in η, indicating that OPP belongs to a typical non-Newtonian fluid. Furthermore, a decrease in ζ-potential (from -21.5 mV to -11.3 mV) and an increase in particle size distribution (from a nano to micro scale) was observed in OPP after gelation, as well as a more complex (fractal dimension increased from 1.78 to 1.86) and compact (cores observed by cryo-SEM became smaller and denser) structure. The crystallinity of OPP also increased from 8.61% to 26.44%~38.11% with the addition of GDL. The above results call for an investigation of the role of acid-induced OPP gelation on potato cell walls after heat processing.

Fabrication of anthocyanin–rich W1/O/W2 emulsion gels based on pectin–GDL complexes: 3D printing performance

The stability of anthocyanin-rich W₁/O/W₂ double emulsions prepared with Nicandra physalodes (Linn.) Gaertn. Seeds pectin was investigated, including droplet sizes, ζ-potential, viscosity, color, microstructures and encapsulation efficiency. Furthermore, the gelation behavior, rheological behavior, texture behavior and three-dimensional (3D) printing effects of the W₁/O/W₂ emulsion gels induced with Glucono-delta-lactone (GDL) were studied. The L*, b*, ΔE, droplet sizes and ζ-potential of the emulsions were gradually increased, while other indicators were gradually decreased during 28 days of storage under 4 ℃. The storage stability of sample under storage at 4 ℃ was higher than 25 ℃. The G' of W₁/O/W₂ emulsion gels gradually boosted with increased GDL addition, and reached the highest after the addition of 1.6 % GDL. In creep-recovery sweep, the minimum strain of 1.68 % and the highest recovery rate of 86 % were also found for the emulsion gels with 1.6 % GDL. Accordingly, the models "KUST", hearts, flowers printed by emulsion gels after 60 min addition of 1.6 % GDL had the best printing effects. The W₁/O/W₂ emulsion gels based on pectin-GDL complexes exhibited good performance in protecting anthocyanins and suggested as a potential ink for food 3D printing.

A Novel Strategy to Improve Cloud Stability of Orange-Based Juice: Combination of Natural Pectin Methylesterase Inhibitor and High-Pressure Processing

This study investigated the prospect of producing cloud-stable orange-based juice by combining high-pressure processing (HPP) with a natural kiwifruit pectin methylesterase inhibitor (PMEI) during chilled storage. Kiwifruit is rich in a PMEI, which greatly improves the cloud loss caused by the pectin methylesterase (PME) demethylation of pectin. The results show that the cloud loss of orange juice occurred after 3 days, while the orange-kiwifruit mixed juice and kiwifruit puree were cloud stable during 28 days' storage. Although, the kiwifruit puree contained larger particles compared to the orange juice, its higher viscosity and solid-like behavior were dominant, improving the cloud stability of the juice systems. In addition, the particle size distribution and rheological properties were highly related to PME activity, PMEI activity, and pectin characterization. The kiwifruit PMEI showed higher resistance to HPP and storage time than PME. More water-solubilized pectin fractions with a high molecular mass were found in the kiwifruit puree, leading to its high viscosity and large particle size, but a more chelator-solubilized pectin fraction with a low esterification degree was observed in the orange juice, resulting in its cloud loss. In general, the outcome of this work provides a novel strategy to improve the cloud stability of orange-based juices using natural PMEIs and nonthermal processing technologies.