Strong, conductive, and freezing-tolerant polyacrylamide/PEDOT:PSS/cellulose nanofibrils hydrogels for wearable strain sensors

Nano/micro flexible fiber and paper-based advanced functional packaging materials

Recently, fiber-based and functional paper food packaging has garnered significant attention for its versatility, excellent performance, and potential to provide sustainable solutions to the food packaging industry. Fiber-based food packaging is characterized by its large surface area, adjustable porosity and customizability, while functional paper-based food packaging typically exhibits good mechanical strength and barrier properties. This review summarizes the latest research progress on food packaging based on fibers and functional paper. Firstly, the raw materials used for preparing fiber and functional paper, along with their physical and chemical properties and roles in food packaging, were discussed. Subsequently, the latest advancements in the application of fiber and paper materials in food packaging were introduced. This paper also discusses future research directions and potential areas for improvement in fiber and functional paper food packaging to further enhance their effectiveness in ensuring food safety, quality, and sustainability.

High-strength, anti-fatigue, cellulose nanofiber reinforced polyvinyl alcohol based ionic conductive hydrogels for flexible strain/pressure sensors and triboelectric nanogenerators

Ionic conductive hydrogels (ICHs) have attracted great attention because of their excellent biocompatibility and structural similarity with biological tissues. However, it is still a huge challenge to prepare a high strength, conductivity and durability hydrogel-based flexible sensor with dual network structure through a simple and environmentally friendly method. In this work, a simple one-pot cycle freezing thawing method was proposed to prepare ICHs by dissolving polyvinyl alcohol (PVA) and ferric chloride (FeCl3) in cellulose nanofiber (CNF) aqueous dispersion. A dual cross-linked network was established in hydrogel through the hydrogen bonds and coordination bonds among PVA, CNF, and FeCl3. This structure endows the as-prepared hydrogel with high sensitivity (pressure sensitivity coefficient (S) = 5.326 in the pressure range of 0-5 kPa), wide response range (4511 kPa), excellent durability (over 3000 cycles), short response time (83 ms) and recovery time (117 ms), which can accurately detect various human activities in real time. Furthermore, the triboelectric nano-generator (TENG) made from PVA@CNF-FeCl3 hydrogel can not only supply power for commercial capacitors and LED lamps, but also be used as a self-powered sensor to detect human motion. This work provides a new approach for the development of the next generation of flexible wearable electronic devices.

"Bottom-up" and "top-down" strategies toward strong cellulose-based materials

Cellulose, as the most abundant natural polymer on Earth, has long captured researchers' attention due to its high strength and modulus. Nevertheless, transferring its exceptional mechanical properties to macroscopic 2D and 3D materials poses numerous challenges. This review provides an overview of the research progress in the development of strong cellulose-based materials using both the "bottom-up" and "top-down" approaches. In the "bottom-up" strategy, various forms of regenerated cellulose-based materials and nanocellulose-based high-strength materials assembled by different methods are discussed. Under the "top-down" approach, the focus is on the development of reinforced cellulose-based materials derived from wood, bamboo, rattan and straw. Furthermore, a brief overview of the potential applications fordifferent types of strong cellulose-based materials is given, followed by a concise discussion on future directions.

Cellulose-derived raw materials towards advanced functional transparent papers

Pulp and paper are gradually transforming from a traditional industry into a new green strategic industry. In parallel, cellulose-derived transparent paper is gaining ground for the development of advanced functional materials for light management with eco-friendly, high performance, and multifunctionality. This review focuses on methods and processes for the preparation of cellulose-derived transparent papers, highlighting the characterization of raw materials linked to responses to different properties, such as optical and mechanical properties. The applications in electronic devices, energy conversion and storage, and eco-friendly packaging are also highlighted with the objective to showcase the untapped potential of cellulose-derived transparent paper, challenging the prevailing notion that paper is merely a daily life product. Finally, the challenges and propose future directions for the development of cellulose-derived transparent paper are identified.

Carbon-based single-atom catalysts derived from biomass: Fabrication and application

Single-atom catalysts (SACs) with active metals dispersed atomically have shown great potential in heterogeneous catalysis due to the high atomic utilization and superior selectivity/stability. Synthesis of SACs using carbon-neutral biomass and its components as the feedstocks provides a promising strategy to realize the sustainable and cost-effective SACs preparation as well as the valorization of underused biomass resources. Herein, we begin by describing the general background and status quo of carbon-based SACs derived from biomass. A detailed enumeration of the common biomass feedstocks (e.g., lignin, cellulose, chitosan, etc.) for the SACs preparation is then offered. The interactions between metal atoms and biomass-derived carbon carriers are summarized to give general rules on how to stabilize the atomic metal centers and rationalize porous carbon structures. Furthermore, the widespread adoption of catalysts in diverse domains (e.g., chemocatalysis, electrocatalysis and photocatalysis, etc.) is comprehensively introduced. The structure-property relationships and the underlying catalytic mechanisms are also addressed, including the influences of metal sites on the activity and stability, and the impact of the unique structure of single-atom centers modulated by metal/biomass feedstocks interactions on catalytic activity and selectivity. Finally, we end this review with a look into the remaining challenges and future perspectives of biomass-based SACs. We expect to shed some light on the forthcoming research of carbon-based SACs derived from biomass, manifestly stimulating the development in this emerging research area.

Application of New Polymer Soil Amendment in Ecological Restoration of High-Steep Rocky Slope in Seasonally Frozen Soil Areas

In seasonally frozen soil areas, high-steep rocky slopes resulting from open-pit mining and slope cutting during road construction undergo slow natural restoration, making ecological restoration generally challenging. In order to improve the problems of external soil attachment and long-term vegetation growth in the ecological restoration of high-steep rocky slopes in seasonally frozen areas, this study conducted a series of experiments through the combined application of polyacrylamide (PAM) and carboxymethyl cellulose (CMC) to assess the effects of soil amendments on soil shear strength, water stability, freeze-thaw resistance, erosion resistance, and vegetation growth. This study showed that the addition of PAM-CMC significantly increased the shear resistance and cohesion of the soil, as well as improving the water stability, freeze-thaw resistance, and erosion resistance, but the internal friction angle of the soil was not significantly increased after reaching a certain content. Moderate amounts of PAM-CMC can extend the survival of vegetation, but overuse may cause soil hardening and inhibit vegetation growth by limiting air permeability. It was observed by a scanning electron microscope (SEM) that the gel membrane formed by PAM-CMC helped to "bridge" and bind the soil particles. After discussion and analysis, the optimum application rate of PAM-CMC was 3%, which not only improved the soil structure but also ensured the growth of vegetation in the later stage under the optimum application rate. Field application studies have shown that 3% PAM-CMC-amended soil stably attaches to high-steep rocky slopes, with stable vegetation growth, and continues to grow after five months of freeze-thaw action, with no need for manual maintenance after one year.

Multifunctional sodium lignosulfonate/xanthan gum/sodium alginate/polyacrylamide ionic hydrogels composite as a high-performance wearable strain sensor

Recently, conductive hydrogels have shown great promise in flexible electronics and are ideal materials for the preparation of wearable strain sensors. However, developing a simple method to produce conductive hydrogels with excellent mechanical properties, self-adhesion, transparency, anti-freezing, and UV resistance remains a significant challenge. A novel sodium lignosulfonate/xanthan gum/sodium alginate/polyacrylamide/Zn2+/DMSO (SLS/XG/SA/PAM/Zn2+/DMSO) ionic conductive hydrogel was developed using a one-pot method. The resulting ionic conductive hydrogels have excellent mechanical properties (stress: 0.13 MPa, strain: 1629 %), high anti-fatigue properties, self-adhesion properties (iron: 7.37 kPa, pigskin: 4.74 kPa), anti-freezing (freezing point: -33.49 °C) and UV resistance by constructing a chemical and physical hybrid cross-linking network. In particular, the conductivity of G hydrogel reached 6.02 S/m at room temperature and 5.52 S/m at -20 °C. Thus, the hydrogel was assembled into a flexible sensor that could distinguish a variety of large and small scales human movements, such as joint bending, swallowing and speaking in real time with high stability and sensitivity. Moreover, the hydrogel could be used as electronic skin just like human skin and touch screen pen to write.

Ionic Liquid/Water Binary Solvent Anti-Freezing Hydrogel for Strain and Temperature Sensors

Hydrogels are widely applied in the flexible wearable electronic devices field owing to their skin-like stretchability, superb biocompatibility, and high conductivity retention under mechanical deformations. Nevertheless, hydrogels are prone to freezing at low temperatures and losing water at high temperatures, which seriously limits their practical applications. Herein, a binary solvent system of ionic liquid (1-ethyl-3-methylimidazolium chloride) and water was prepared to endow the ionic hydrogel high ionic conductivity (0.28 S m-1 at 25 °C), high transparency (94.26%), and superior freezing tolerance (-50 °C). The multiple hydrogen bonds formed among polymer chains, water, and ionic liquids significantly improved the mechanical properties of the ionic hydrogel, enabling excellent tensile properties (strain >1800%) and durability (1000 times at 100% strain). Moreover, the ionic hydrogel was further assembled into a dual-response sensor, which exhibited satisfactory sensitivity to both tension (gauge factor = 2.15 at 200% strain) and temperature (temperature coefficient of resistance = -1.845%/°C) and can be applied for human motion and body temperature monitoring. This study provides a versatile method for preparing multifunctional hydrogels with a wide range of applications and lays the groundwork for human movement detection and smart health care.

Fabrication of anti-freezing and self-healing nanocomposite hydrogels based on phytic acid and cellulose nanocrystals for high strain sensing applications

For hydrogel-based flexible sensors, it is a challenge to enhance the stability at sub-zero temperatures while maintaining good self-healing properties. Herein, an anti-freezing nanocomposite hydrogel with self-healing properties and conductivity was designed by introducing cellulose nanocrystals (CNCs) and phytic acid (PA). The CNCs were grafted with polypyrrole (PPy) by chemical oxidation, which were used as the nanoparticle reinforcement phase to reinforce the mechanical strength of hydrogels (851.8%). PA as a biomass material could form strong hydrogen bond interactions with H2O molecules, endowing hydrogels with prominent anti-freezing properties. Based on the non-covalent interactions, the self-healing rate of the hydrogels reached 92.9% at -15 °C as the content of PA was 40.0 wt%. Hydrogel-based strain sensors displayed high sensitivity (GF = 0.75), rapid response time (350 ms), good conductivity (3.1 S m-1) and stability at -15 °C. Various human movements could be detected by using them, including small (smile and frown) and large changes (elbow and knee bending). This work provides a promising method for the development of flexible wearable sensors that work stably in frigid environments.

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Interfacial Modulation of Ti3 C2 Tx MXene by Cellulose Nanofibrils to Construct Hybrid Fibers with High Volumetric Specific Capacitance

The intrinsic poor rheological properties of MXene inks result in the MXene nanosheets in dried MXene microfibers prone to self-stacking, which is not conducive to ion transport and diffusion, thus affecting the electrochemical performance of fiber-based supercapacitors. Herein, robust cellulose nanofibrils (CNF)/MXene hybrid fibers with high electrical conductivity (916.0 S cm-1 ) and narrowly distributed mesopores are developed by wet spinning. The interfacial interaction between CNF and MXene can be enhanced by hydrogen bonding and electrostatic interaction due to their rich surface functional groups. The interfacial modulation of MXene by CNF can not only regulate the rheology of MXene spinning dispersion, but also enhance the mechanical strength. Furthermore, the interlayer distance and self-stacking effect of MXene nanosheets are also regulated. Thus, the ion transport path within the fiber material is optimized and ion transport is accelerated. In H2 SO4 electrolyte, a volumetric specific capacitance of up to 1457.0 F cm-3 (1.5 A cm-3 ) and reversible charge/discharge stability are demonstrated. Intriguingly, the assembled supercapacitors exhibit a high-volume energy density of 30.1 mWh cm-3 at 40.0 mW cm-3 . Moreover, the device shows excellent flexibility and cycling stability, maintaining 83% of its initial capacitance after 10 000 charge/discharge cycles. Practical energy supply applications (Power for LED and electronic watch) can be realized.

Incorporation of Cellulose-Based Aerogels into Textile Structures

Given their exceptional attributes, aerogels are viewed as a material with immense potential. Being a natural polymer, cellulose offers the advantage of being both replenishable and capable of breaking down naturally. Cellulose-derived aerogels encompass the replenish ability, biocompatible nature, and ability to degrade naturally inherent in cellulose, along with additional benefits like minimal weight, extensive porosity, and expansive specific surface area. Even with increasing appreciation and acceptance, the undiscovered possibilities of aerogels within the textiles sphere continue to be predominantly uninvestigated. In this context, we outline the latest advancements in the study of cellulose aerogels' formulation and their diverse impacts on textile formations. Drawing from the latest studies, we reviewed the materials used for the creation of various kinds of cellulose-focused aerogels and their properties, analytical techniques, and multiple functionalities in relation to textiles. This comprehensive analysis extensively covers the diverse strategies employed to enhance the multifunctionality of cellulose-based aerogels in the textiles industry. Additionally, we focused on the global market size of bio-derivative aerogels, companies in the industry producing goods, and prospects moving forward.

Multifunctional, Self-Adhesive MXene-Based Hydrogel Flexible Strain Sensors for Hand-Written Digit Recognition with Assistance of Deep Learning

The conductive hydrogel as a flexible sensor not only has certain mechanical flexibility but also can be used in the field of human health detection and human-computer interaction. Herein, by introduction of tannic acid (TA) with MXene into the polyacrylamide (PAM)/carboxymethyl chitosan (CMC) double-network hydrogel, a hydrogel with high stretchability, self-adhesion, and high sensitivity was prepared. CMC and PAM form a semi-interpenetrating double-network of high toughness and durability through electrostatic interactions and multiple hydrogen bonding networks. The abundant hydrophilic functional groups on TA and MXene form multiple hydrogen bonds simultaneously with the polymer network, ensuring high stretchability and sensitivity of the hydrogel. The hydrogel can display an accurate response to a variety of stimulus signals and can monitor both human joint movements and small physiological signal changes. It can also be combined with deep learning algorithms to classify handwritten digits with an accuracy rate of 98%. This work can promote the application of hydrogel sensors with durability and high sensitivity. The combination of algorithms and flexible sensors provides important ideas for the further development of flexible devices.

Tremella polysaccharide-based conductive hydrogel with anti-freezing and self-healing ability for motion monitoring and intelligent interaction

The application of conductive hydrogels in flexible wearable devices has garnered significant attention. In this study, a self-healing, anti-freezing, and fire-resistant hydrogel strain sensor is successfully synthesized by incorporating sustainable natural biological materials, viz. Tremella polysaccharide and silk fiber, into a polyvinyl alcohol matrix with borax cross-linking. The resulting hydrogel exhibits excellent transparency, thermoplasticity, and remarkable mechanical properties, including a notable elongation (1107.3 %) and high self-healing rate (91.11 %) within 5 min, attributed to the dynamic cross-linking effect of hydrogen bonds and borax. A strain sensor based on the prepared hydrogel sensor can be used to accurately monitor diverse human movements, while maintaining exceptional sensing stability and durability under repeated strain cycles. Additionally, a hydrogel touch component is designed that can successfully interact with intelligent electronic devices, encompassing functions like clicking, writing, and drawing. These inherent advantages make the prepared hydrogel a promising candidate for applications in human health monitoring and intelligent electronic device interaction.

Muscle-inspired anisotropic carboxymethyl cellulose-based double-network conductive hydrogels for flexible strain sensors

Conductive hydrogels are considered one of the most promising materials for preparing flexible sensors due to their flexible and extensible properties. However, conventional hydrogels' weak mechanical and isotropic properties are greatly limited in practical applications. Here, the internal structure of the hydrogel was regulated by pre-stretching synergistic ion crosslinking to construct a carboxymethyl cellulose-based double network-oriented hydrogel similar to muscle. The introduction of pre-stretching increased the tensile strength of the double-network hydrogel from 1.45 MPa to 4.32 MPa, and its light transmittance increased from 67.3 % to 84.5 %. In addition, the hydrogel's thermal stability and electrical conductivity were improved to a certain extent. Its good mechanical properties and conductive properties can be converted into stable electrical signal output during deformation. The carboxymethyl cellulose-based double network oriented hydrogels were further assembled as flexible substrates into flexible sensor devices. The hydrogel sensors can monitor simple joint movements as well as complex spatial movements, which makes them have potential application value in the research field of intelligent response electronic devices such as flexible wearables, intelligent strain sensing, and soft robots.

Water-dispersible and stable polydopamine coated cellulose nanocrystal-MXene composites for high transparent, adhesive and conductive hydrogels

High conductive and transparent hydrogels with adhesion function are ideal candidates for soft electronic devices. However, it remains a challenge to design appropriate conductive nanofillers to endow hydrogels with all these characteristics. The 2D MXene sheets are promising conductive nanofillers for hydrogels due to excellent electricity and water-dispersibility. However, MXene is quite susceptible to oxidation. In this study, polydopamine (PDA) was employed to protect the MXene from oxidation and meanwhile endow hydrogels with adhesion. However, PDA coated MXene (PDA@MXene) were easily flocculated from dispersion. 1D cellulose nanocrystals (CNCs) were employed as steric stabilizers to prevent the agglomeration of MXene during the self-polymerization of dopamine. The obtained PDA coated CNC-MXene (PCM) sheets display outstanding water-dispersible and anti-oxidation stability and are promising conductive nanofillers for hydrogels. During the fabrication of polyacrylamide hydrogels, the PCM sheets were partially degraded into PCM nanoflakes with smaller size, leading to transparent PCM-PAM hydrogels. The PCM-PAM hydrogels can self-adhere to skin, and possess high transmittance of 75 % at 660 nm, superior electric conductivity of 4.7 S/m with MXene content as low as 0.1 % and excellent sensitivity. This study will facilitate the development of MXene based stable, water-dispersible conductive nanofillers and multi-functional hydrogels.

The catalytic hydrodeoxygenation of bio-oil for upgradation from lignocellulosic biomass

The increasing depletion of oil resources and the environmental problems caused by using much fossil energy in the rapid development of society. The bio-oil becomes a promising alternative energy source to fossil. However, bio-oil cannot be directly utilized, owing to its high proportion of oxygenated compounds with low calorific value and poor thermal stability. Catalytic hydrodeoxygenation (HDO) is one of the most effective methods for refining oxygenated compounds from bio-oil. HDO catalysts play a crucial role in the HDO reaction. This review emphasizes the description of the main processing of HDO and various catalytic systems for bio-oil, including noble/non-noble metal catalysts, porous organic polymer catalysts, and polar solvents. A discussion based on recent studies and evaluations of different catalytic materials and mechanisms is considered. Finally, the challenges and future opportunities for the development of catalytic hydrodeoxygenation for bio-oil upgradation are looked forward.

Carboxymethylcellulose reinforced, double-network hydrogel-based strain sensor with superior sensing stability for long-term monitoring

Hydrogel-based strain sensors have garnered significant attention for their potential for human health monitoring. However, its practical application has been hindered by water loss, freezing, and structural impairment during long-term motion monitoring. Here, a strain sensor based on double-network (DN) hydrogel of polyacrylamide (PAAm)/carboxymethylcellulose (CMC) was developed in a ternary solvent system of lithium chloride (LiCl)/ethylene glycol (EG)/H₂O through a facile one-pot radical polymerization strategy. The incorporation of EG effectively mitigated the hydration of lithium salts by generating stable ion clusters with Li⁺ and stronger hydrogen bonds within the polymer matrix. The sensor demonstrated excellent mechanical properties, including a stretchability of 1858 %, toughness of 1.80 MJ/m³, and recoverability of 102 %. Furthermore, the LiCl/EG/H₂O ternary system resulted in high conductivity, excellent anti-freezing performance, and superior sensing stability. In addition, the sensor exhibited remarkable sensitivity, enabling the monitoring of human movements ranging from subtle to significant deformations, including throat motion and bending of the elbow, wrist, finger, and lower limb. This study presents a viable approach for constructing hydrogel-based strain sensors with exceptional sensing stability for long-term tracking of human motions.

Biocompatible, Resilient, and Tough Nanocellulose Tunable Hydrogels

Hydrogels have been proposed as potential candidates for many different applications. However, many hydrogels exhibit poor mechanical properties, which limit their applications. Recently, various cellulose-derived nanomaterials have emerged as attractive candidates for nanocomposite-reinforcing agents due to their biocompatibility, abundance, and ease of chemical modification. Due to abundant hydroxyl groups throughout the cellulose chain, the grafting of acryl monomers onto the cellulose backbone by employing oxidizers such as cerium(IV) ammonium nitrate ([NH₄]₂[Ce(NO₃)₆], CAN) has proven a versatile and effective method. Moreover, acrylic monomers such as acrylamide (AM) may also polymerize by radical methods. In this work, cerium-initiated graft polymerization was applied to cellulose-derived nanomaterials, namely cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF), in a polyacrylamide (PAAM) matrix to fabricate hydrogels that display high resilience (~92%), high tensile strength (~0.5 MPa), and toughness (~1.9 MJ/m³). We propose that by introducing mixtures of differing ratios of CNC and CNF, the composite's physical behavior can be fine-tuned across a wide range of mechanical and rheological properties. Moreover, the samples proved to be biocompatible when seeded with green fluorescent protein (GFP)-transfected mouse fibroblasts (3T3s), showing a significant increase in cell viability and proliferation compared to samples comprised of acrylamide alone.