Oxidized dextran-crosslinked ferrocene-chitosan-PEI composite porous material integrating adsorption and degradation to malachite green

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

Efficient removal and recycling of phosphorus from complex water matrices using environmentally friendly and sustainable materials is essential yet challenging. To this end, a novel bio-based adsorbent (DX-FcA-CS) was developed by coupling oxidized dextran-crosslinked chitosan with ferrocene carboxylic acid (FcA). Detailed characterization revealed that the incorporation of FcA reduced the total pore area of DX-FcA-CS to 7.21 m2·g-1, one-third of ferrocene-free DX-CS (21.71 m2·g-1), while enhancing thermal stability and PO43- adsorption performance. Adsorption kinetics and isotherm studies demonstrated that the interaction between DX-FcA-CS and PO43- followed a pseudo-second-order kinetic model and Langmuir model, indicating chemical and monolayered adsorption mechanisms, respectively. Moreover, DX-FcA-CS exhibited excellent anti-interference properties against concentrated co-existing inorganic ions and humic acid, along with high recyclability. The maximum adsorption capacity reached 1285.35 mg·g-1 (∼428.45 mg P g-1), three times that of DX-CS and surpassing many other adsorbents. PO43--loaded DX-FcA-CS could be further carbonized into electrode material due to its rich content of phosphorus and nitrogen, transforming waste into a valuable resource. These outstanding characteristics position DX-FcA-CS as a promising alternative for phosphate capture and recycling. Overall, this study presents a viable approach to designing environmentally friendly, recyclable, and cost-effective biomaterial for wastewater phosphate removal and value-added applications.

Assembly of Functional Co(II) Metal-Organic Frameworks through a Mixed Ligand Strategy: Structure and Photocatalytic Degradation Properties

Four Co(II)-based metal-organic frameworks (MOFs) were constructed by a mixed ligand strategy under solvothermal conditions. The controllable modification of the bridging groups in the secondary building units was realized by changing the anions in MOFs 1-3. The MOF 4 with 3D framework structure was obtained by regulating the solvent ratio following the synthesis process of MOF 3. Furthermore, the MOFs 1-4 exhibited efficient photocatalytic activity for the degradation of malachite green (MG) dye without any photosensitizer or cocatalyst under a low-energy light source, the decolorization ratio of MG all reached more than 96.0% within 60 min, and maximal degradation was obtained to be 99.4% (MOF 4). The recycling experiments showed that the degradation rate of MG was still higher than 91% after 10 cycles. In the MOF 4 as representation, the photocatalytic process was explored systematically. The possible mechanism of catalytic degradation was discussed, which proved the existence of efficient oxidation active factors (•O2-, •OH, and h+). The possible intermediates and degradation pathways were investigated based on high-performance liquid chromatography tandem mass spectrometry. Additionally, MOFs 1-4 also exhibited excellent photocatalytic activity for the degradation of methylene blue, methyl violet, rhodamine B, and basic red 9.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

Rapid and convenient synthesis of "green" ammonium-modified chitosan composite sponge with the existence of ascorbic acid for highly efficient removal of Congo red (CR)

In this study, a new green composite sponge made of chitosan and modified with ammonium ascorbate (ACS-CIT) was synthesized in just 10 min. Compared with CS-CIT (sponge prepared from acetic acid), ACS-CIT exhibits significantly enhanced adsorption performance for CR, with the saturated adsorption capacities increased from 353.667 to 1261.639 mg·g-1. The adsorption mechanism can be summarized as the generation of more hydrogen bonds, electrostatic attraction, and intra particle diffusion, revealing the addition of ascorbic acid introduced more hydroxyl groups, thereby enhancing the hydrogen bonding force, and the ammonium modification of chitosan improved the electrostatic attraction of the material, resulting in a significant increase in its adsorption capacity. Additionally, the prepared ACS-CIT showed excellent CR removal performance even in the presence of multiple interfering factors coexisting in the simulated wastewater, and the adsorption capacity remained stable after at least five cycles. Furthermore, the maximum bed capacity of ACS-CIT for CR is 1152.829 mg·g-1 under the given conditions of a flow rate of 1 mL·min-1, inlet concentration of 150 mg·L-1, a bed height of 1 cm respectively, and the breakthrough curve followed the Thomas model. The results indicated the eco-friendly and recyclable ACS-CIT is a promising adsorbent for CR dye removal in water.

Fe-pillared montmorillonite functionalized chitosan/gelatin foams for efficient removal of organic pollutants by integration of adsorption and Fenton degradation

A Fe-pillared montmorillonite (Fe-MMT) functionalized bio-based foam (Fe-MMT@CS/G) was developed by using chitosan (CS) and gelatin (G) as the matrix for high-efficiency elimination of organic pollutants through the integration of adsorption and Fenton degradation. The results showed that the mechanical properties of as-obtained foam were strengthened by the addition of certain amounts of Fe-MMT. Interestingly, Fe-MMT@CS/G displayed efficient adsorption ability for charged pollutants under a wide range of pH. The adsorption processes of methyl blue (MB), methylene blue (MEB) and tetracycline hydrochloride (TCH) on Fe-MMT@CS/G were well described by the Freundlich isotherm model and pseudo-second-order kinetic model. The maximum adsorption capacities were 2208.24 mg/g for MB, 1167.52 mg/g for MEB, and 806.31 mg/g for TCH. Electrostatic interactions, hydrogen bonding and van der Waals forces probably involved the adsorption process. As expected, this foam could exhibit better removal properties toward both charged and uncharged organic pollutants through the addition of H2O2 to trigger the Fenton degradation reaction. For non-adsorbable and uncharged bisphenol A (BPA), the removal efficiency was dramatically increased from 1.20 % to 92.77 % after Fenton degradation. Additionally, it presented outstanding recyclability. These results suggest that Fe-MMT@CS/G foam is a sustainable and efficient green material for the alleviation of water pollution.

Dielectric barrier discharge plasma-modified chitosan flocculant and its flocculation performance

The flocculation performance of chitosan can be enhanced by grafting modification to overcome its disadvantages of poor water solubility. In this study, chitosan was modified by dielectric barrier discharge plasma and polymerized with acrylamide and aluminum chloride to synthesize a new chitosan-based flocculant, namely, chitosan-acrylamide-aluminum chloride (CA-PAC). After optimizing the synthesis conditions of CA-PAC, the best conditions were as follows: discharge time of 3 min, discharge power of 50 W, polymerization temperature of 60 °C, polymerization time of 3 h, total monomer concentration of 100 g/L, and m(AlCl3):m(CA) ratio of 2:1. Characterization was performed through SEM, XPS, FTIR, XRD, TG and 1H NMR. Results showed that the preparation of CA-PAC was successful. The influences of flocculant dosage, pH, and stirring intensity on flocculation efficiency were investigated. The removal efficiency of turbidity was 94.1 %. The investigation of the flocculation mechanism revealed that CA-PAC mainly relied on charge neutralization or the synergic action of electric neutralization, bridging, and roll-sweep under acidic and neutral conditions, but it depended on the joint action of adsorption bridging and net sweeping under alkaline conditions. This study provides new ideas for the preparation and development of modified chitosan and broadens its application in water treatment.

Fabrication of titania/calcium alginate nanocomposite matrix for efficient adsorption and photocatalytic degradation of malachite green

This work aims to examine the two techniques' efficiency for the elimination of malachite green (MG) by photocatalytic degradation and adsorption onto synthesized solid nanomaterials. Three solid samples were prepared as calcium alginate (AG), nanotitania (NT), and nanotitania/calcium alginate composite (TG). The morphological and physicochemical characteristics of the solid nanomaterials were investigated by XRD, TGA, DRS, FTIR, pHPZC, nitrogen adsorption/desorption isotherm, SEM, and TEM. The main experimental conditions were determined for sample dose, shaking time, pH, initial malachite green concentration, temperature, ionic strength, and UV lamp power. The resulting data proved that TG attained the higher adsorption capacity (252.52 mg/g) at 40 °C. The adsorption of MG was well fitted by Langmuir, Temkin, Dubinin-Radushkevich, pseudo-second order, intra-particle diffusion, and Elovich models onto all the prepared samples, confirming the endothermic, spontaneous, and favorable adsorption process. The maximum degradation percent (99.6 %) of MG was achieved by using 1.0 g/L as a catalyst dose, 10 mg/L of initial MG concentration, and 33 W for TG. The photodegradation of MG was well fitted by Eyring-Polanyi and Arrhenius models onto the surface of catalyst. The TG reusability resulted in a decrease in the degradation efficiency by 9.8 %, indicating its great capacity as the first nanotitania/calcium alginate nanocomposite used in removing MG from wastewater by two technologies in the same article.