Heterojunction material BiYO3/g-C3N4 modified with cellulose nanofibers for photocatalytic degradation of tetracycline

Oxygen vacancy enhanced photocatalytic activity of Cu2O/TiO2 heterojunction

In this study, a method was developed to create oxygen vacancies in Cu2O/TiO2 heterojunctions. By varying the amounts of ethylenediaminetetraacetic acid (EDTA), sodium citrate, and copper acetate, Cu2O/TiO2 with different Cu ratios were synthesized. Tests on CO2 photocatalytic reduction revealed that Cu2O/TiO2's performance is influenced by Cu content. The ideal Cu mass fraction in Cu2O/TiO2, determined by inductively coupled plasma (ICP), is between 0.075% and 0.55%, with the highest CO yield being 10.22 μmol g-1 h-1, significantly surpassing pure TiO2. High-resolution transmission electron microscopy and electron paramagnetic resonance studies showed optimal oxygen vacancy in the most effective heterojunction. Density functional theory (DFT) calculations indicated a 0.088 eV lower energy barrier for ∗CO2 to ∗COOH conversion in Cu2O/TiO2 with oxygen vacancy compared to TiO2, suggesting that oxygen vacancies enhance photocatalytic activity.

Oxygen vacancy engineering of ultra-small CuWO4 nanoparticles for boosting photocatalytic organic pollutant degradation

Nanomaterials have attracted great interest in the field of photocatalytic degradation due to their larger specific surface area and efficient charge/mass transfer ability, which are beneficial for enhancing photocatalytic activity. However, the bandgap of photocatalysts would increase with the size reduction, weakening the photoabsorption ability. Thus the relationship between the size of catalysts and photoactivity should be balanced to achieve optimal photocatalytic performance. Herein, ultra-small CuWO4 nanoparticles (ca. 39 nm) with moderate oxygen vacancies (CuWO4-OVs) were synthesized by the cascade strategy (ligand confinement@fast calcination). The introduction of oxygen vacancies offset the deficiency of light absorption ability caused by the small size effect. Besides, oxygen vacancies could provide more reaction active sites, conducive to the adsorption and activation of dye molecules and H2O. Degradation experiments reveal that the optimized photocatalyst CuWO4-OVs 350 shows outstanding photocatalytic activity, and the removal ratio of methylene blue (MB) reaches over 90.26% in 70 min, exceeding that of pure CuWO4-air (37.66%). Additionally, the degradation performance of CuWO4-OVs 350 surpasses most of the other CuWO4-based photocatalytic systems. More importantly, the photocatalytic degradation activity of CuWO4-OVs 350 could remain at 88.26% even after five cycles, and high photostability was achieved. This work affords constructive inspiration for synergistic photoactivity enhancement and increase of catalyst reaction active sites to achieve eminent photocatalytic degradation performance.

Insight into the key factors and mechanism of excellent tetracycline adsorption on amorphous cobalt carbonate nanosheets

The extensive use of tetracyclines (TCs) has led to their widespread distribution in the environment, causing serious harm to ecosystems because of their toxicity and resistance to decomposition. Adsorption is presently the principal approach to dispose of TCs, and the development of excellent adsorbents is crucial to TC removal. Herein, a novel amorphous cobalt carbonate hydroxide (ACCH) was successfully prepared by a one-step solvothermal method, which was identified as Co(CO3)0·63(OH)0.74·0.07H2O. The ultimate adsorption capacity of ACCH for TC reaches 2746 mg g-1, and the excellent adsorption performance can be maintained over a wide pH (3.0-11.0) and temperature (10-70 °C) range. Moreover, ACCH also exhibits a wonderful adsorption performance for other organic contaminants, such as ciprofloxacin and Rhodamine B. The TC adsorption process can be reasonably described by the pseudo-second-order kinetic model, intraparticle model and Langmuir isothermal model. The experimental results in this work suggest that the excellent adsorption performance of ACCH is ascribed to the large specific surface area, alkaline characteristics and numerous functional groups of ACCH. Accordingly, this work provides a promising strategy for the development of highly-efficient adsorbents and demonstrates their application prospects in environmental remediation.

Zinc-Doped BiOBr Hollow Microspheres for Enhanced Visible Light Photocatalytic Degradation of Antibiotic Residues

Photocatalysis represents an effective technology for environmental remediation. Herein, a series of Zn-doped BiOBr hollow microspheres are synthesized via one-pot solvothermal treatment of bismuth nitrate and dodecyl ammonium bromide in ethylene glycol along with a calculated amount of zinc acetate. Whereas the materials morphology and crystal structure remain virtually unchanged upon Zn-doping, the photocatalytic performance toward the degradation of ciprofloxacin is significantly improved under visible light irradiation. This is due to the formation of a unique band structure that facilitates the separation of photogenerated electron-hole pairs, reduced electron-transfer resistance, and enhanced electron mobility and carrier concentration. The best sample consists of a Zn doping amount of 1%, which leads to a 99.2% degradation rate of ciprofloxacin under visible photoirradiation for 30 min. The resulting photocatalysts also exhibit good stability and reusability, and the degradation intermediates exhibit reduced cytotoxicity compared to ciprofloxacin. These results highlight the unique potential of BiOBr-based photocatalysts for environmental remediation.

Plasmonic photocatalytic nanocomposite of in-situ synthesized MnO2 nanoparticles on cellulosic fabric with structural color

The textile industry produces 20 % of the industrial water pollution containing toxic substances mostly dyes. Reducing material consumption and developing more efficient and scalable textile waste-water treatment methods such as photocatalytic degradation is essential. In this work, manganese dioxide nanoparticles (MnO2 NPs) were synthesized on the cotton fabric via a facile in-situ process. The preparation process was optimized for the highest photocatalytic activity under sunlight and color change originating from the plasmonic structural color of the nanoparticles. This promotes the photocatalytic activity by delocalization of the hot electrons while demonstrating the best washing and light fastness by using the least chemicals, and energy in a short time. In this way, the fabric was colored without any dye and possessed robust photocatalytic activity. Further, no dye-containing waste-water is made, and also accomplished to degrade dyes in a few hours under sunlight which is substantial for sustainable development. The treated fabrics indicated favorable mechanical properties, enhanced thermal stability, and perfect biocompatibility.

Highly Efficient and Reusable PI/TiO2 Organic-Inorganic Microfibers for Sustainable Photocatalytic Degradation of Multiple Organic Pollutants under Simulated Sunlight

Herein, a series of polyimide (PI)/titanium dioxide (TiO2) organic-inorganic flexible composite microfibers with high photocatalytic performance and good reusability were prepared by combining electrospinning technology and a hydrothermal method. Under simulated sunlight, the photocatalytic characteristics of the as-prepared PI nanofibers, TiO2 nanorods, and PI/TiO2 microfibers were evaluated with photocatalytic degradation of Rhodamine B (RhB) solution. Among the tested samples, PI/TiO2-3 mL hydrochloric acid-160 °C-14 h (PI/TiO-3-160-14) (100%) exhibited a superior photocatalytic degradation rate compared to pure PI (84.0%) and TiO2 (62.2%). The enhancement of the photocatalytic performance was attributed to the Z-scheme heterojunction mechanism. When the interface was irradiated by simulated sunlight, the band edge bending, built-in electric field, and Coulomb interaction synergistically facilitated the separation and transport of electron-hole pairs in the heterojunction. This enhanced the oxidation and reduction abilities of the valence and conduction bands of PI/TiO2. These results were adequately verified by X-ray photoelectron spectroscopy (XPS) analyses and radical trapping experiments. Additionally, PI/TiO2 microfibers also demonstrated excellent photocatalytic activity toward methylene blue (MB, 81.4%), methyl orange (MO, 95.9%), and malachite green (KG, 98.9%), underscoring the versatile applicability of PI/TiO2. Further supplementary investigations illustrated that PI/TiO2 microfibers also possess excellent photostability during our extensive recycling photocatalytic experiments.

Design and construction of a robust ternary Bi5O7I/Cd0.5Zn0.5S/CuO photocatalytic system for boosted photodegradation of antibiotics via dual-S-scheme mechanisms: Environmental factors and degradation intermediates

The detection of efficacious and environment-friendly nanomaterials with prominent photocatalytic performance is crucial for the detoxification of antibiotics in wastewater. Herein, a dual-S-scheme Bi5O7I/Cd0.5Zn0.5S/CuO semiconductor was designed and fabricated via a simple approach to degrade tetracycline (TC) and other types of antibiotics under LED illumination. However, Cd0.5Zn0.5S and CuO nanoparticles were decorated on the surface of the Bi5O7I microsphere to create a dual-S-scheme system that stimulates visible-light utilization and facilitates the dissolution of excited photo-curriers. Therefore, the Bi5O7I/Cd0.5Zn0.5S/CuO system offers strong redox ability, which reflects reinforced photocatalytic activity and robust stability. The ternary heterojunction discloses enhanced TC detoxification efficiency of 92% in 60 min with TC destruction rate constant of 0.04034 min-1, outperforming pure Bi5O7I, Cd0.5Zn0.5S, and CuO by 4.27, 3.20, and 4.80 folds, respectively. Besides, Bi5O7I/Cd0.5Zn0.5S/CuO manifests outstanding photo-activity against a series of antibiotics like norfloxacin, enrofloxacin, ciprofloxacin, and levofloxacin under the same operational conditions. The active species detection, TC destruction pathways, catalyst stability, and photoreaction mechanisms of Bi5O7I/Cd0.5Zn0.5S/CuO were accurately explained in detail. Summarily, this work introduces a new class of dual-S-scheme system with strengthened catalytic properties to effectively eliminate the antibiotics in wastewater under visible-light illumination.