One-step quaternization and macromolecular reconstruction to prepare micro-/nano-porous cellulose beads from homogeneous solution for low-concentration amoxicillin removal

Quaternary ammonium-modified cellulose: A sustainable strategy for purifying aqueous solutions contaminated with sunset yellow dye

This study showcases the remarkable efficacy of quaternary ammonium-modified cellulose as a highly sustainable biosorbent for removing Sunset Yellow (SY) dye from water. Detailed analysis was conducted using infrared (FTIR) spectroscopy for structural changes and Scanning Electron Microscopy (SEM) for morphological changes. A minimal yet highly effective dose of 0.05 g was identified through dedicated optimization experiments, achieving near-complete removal (99 %) of SY. The biosorbent demonstrated exceptional performance across a broad pH range (2-10), accomplishing remarkable removal within just 5 min. Langmuir modeling uncovered a monolayer sorption mechanism with a high maximum capacity (107.08 mg g-1), and thermodynamic analysis affirmed the spontaneity and favorability of the sorption process. Noteworthy is the biosorbent's impressive regeneration capabilities (up to 95 %) using 1.0 M NaOH or HCl solutions and its sustained performance over three sorption-regeneration cycles, highlighting its exceptional stability and reusability. The modified cellulose exhibited remarkable resistance to common interfering ions (chloride, nitrate, and sulfate) at 10 and 100 mg L-1 concentrations. These combined features position quaternary ammonium-modified cellulose as a promising, sustainable, and efficient option for dye wastewater treatment.

Porous cationic cellulose beads prepared by homogeneous in-situ quaternization and acid induced regeneration for water/moisture absorption

Chemical modification is a reliable and efficient strategy for designing cellulose-based functional materials. Herein, porous quaternized cellulose beads (QCBs) as cationic superabsorbent were fabricated by homogeneous in-situ chemical grafting cellulose molecular chains with glycidyl trimethylammonium chloride (GTAC) in tetraethylammonium hydroxide (TEAOH)/urea aqueous solution followed by acetic acid induced regeneration. The influence of GTAC dosage on the physicochemical-structural properties of cationic QCBs was deeply investigated. Results revealed that cotton liner could well-dissolved in TEAOH/urea aqueous solution, leading to a homogeneous and efficient quaternization medium for cellulose, thereby giving the high DS and positive charge density for quaternized cellulose. NMR results demonstrated the main substitution of GTAC groups at 2-OH and 6-OH positions of the cellulose chains during quaternization reaction. With increasing GTAC dosage, the network skeleton of QCBs gradually transformed from thick fibrils to thin aggregates, as well as enhanced pore volumes and hydrophilicity. Accordingly, QCBs-1.5 with high pore volume (99.70 cm3/g) exhibited excellent absorption capacity and efficiency, absorbing 122.32 g of water and 0.45 g of moisture per gram of the beads in 20 min. This work not only offers a simple strategy for the homogeneous quaternization modification of cellulose, but also provides a porous cellulose-based cationic superabsorbent material.

Insights into the assembly process and properties of regenerated cellulose beads prepared in alkali/urea aqueous solutions

Taking the perspective of cellulose molecular chain assembly via the "bottom-top" route, we delve into the influence of both the cellulose solution and the coagulation bath on the assembly process and structure of regenerated cellulose beads (RCBs). The results show that cellulose molecular weight, mass fraction, and the presence of surfactant have an impact on RCBs. Contrary to traditional views where the structures of material are determined by solvent-nonsolvent exchange rate, ion-cellulose binding capacity also affects RCBs. Overall, the influence of ions follows the Hofmeister sequence. Kosmotropes promote the assembly of cellulose chains and elementary fibers, leading to "salting out" effects, reduced pore size of RCBs, increased crystallinity, and enhanced mechanical properties. In contrast, chaotropes induce "salting in" effects, resulting in opposite outcomes. The average pore size of RCBs coagulated in NaSCN solution was approximately 15-folds larger than those prepared in sodium citrate solution. Anions have a greater impact than cations, and both "salting out" and "salting in" effects strengthen with concentration. Temperature variations primarily affect solvent and nonsolvent exchange speed during cellulose regeneration. These findings provide new insights into regulating RCBs, enabling tailored performance for different applications.

Tailoring magnetic Sn-MOFs for efficient amoxicillin antibiotic removal through process optimization

This study investigated the efficacy of magnetic Sn metal-organic frameworks (MSn-MOFs) in removing the insecticide amoxicillin (AMX) from aqueous solutions. Our thorough experimental investigation showed that MSn-MOFs were an incredibly effective adsorbent for removing AMX. Several methods were used to characterize the material. BET investigation of the data displayed a significant surface area of 880 m2 g-1 and a strong magnetic force of 89.26 emu g-1. To identify the point of zero charge, surface characterization was carried out and the value was 7.5. This shows that the adsorbent carries a positive and negative charge below and above this position, respectively. Moreover, the impact of pH on adsorption equilibrium was explored. The results of kinetic models to explore the adsorption of AMX on MSn-MOFs supported the pseudo-second-order, and the adsorption complied well with the Langmuir isotherm. The results revealed that the overall adsorption mechanism may entail chemisorption via an endothermic spontaneous process with MSn-MOFs. The precise modes by which MSn-MOFs and AMX interacted may involve pore filling, H-bonding, π-π interaction, or electrostatic interaction. Determining the nature of this interaction is essential in understanding the adsorption behavior of the MOFs and optimize the adsorbent design for real-world applications. The use of the MSn-MOF adsorbent provides a straightforward yet efficient method for the filtration of water and treatment of industrial effluents. The results showed 2.75 mmol g-1 as the maximum capacity for adsorption at pH = 6. Additional tests were conducted to assess the adsorbent regeneration, and even after more than six cycles, the results demonstrated a high level of efficiency. The adsorption results were enhanced by the application of the Box-Behnken design.

New Quaternary Ammonium Derivatives Based on Citrus Pectin

New citrus pectin derivatives carrying pendant N,N-dimethyl-N-alkyl-N-(2-hydroxy propyl) ammonium chloride groups were achieved via polysaccharide derivatization with a mixture of N,N-dimethyl-N-alkyl amine (alkyl = ethyl, butyl, benzyl, octyl, dodecyl) and epichlorohydrin in aqueous solution. The structural characteristics of the polymers were examined via elemental analysis, conductometric titration, Fourier Transform Infrared spectroscopy (FTIR) and 1D (1H and 13C) nuclear magnetic resonance (NMR). Capillary viscosity measurements allowed for the study of viscometric behavior as well as the determination of viscosity-average molar mass for pristine polysaccharide and intrinsic viscosity ([η]) values for pectin and its derivatives. Dynamic light scattering measurements (DLS) showed that pectin-based polymers formed aggregates in aqueous solution with a unimodal distribution. Critical aggregation concentration (cac) for the hydrophobic pectin derivatives were determined using fluorescence spectroscopy. Atom force microscopy (AFM) images allowed for the investigation of the morphology of polymeric populations obtained in aqueous solution, consisting of flocs and aggregates for crude pectin and its hydrophilic derivatives and well-organized aggregates for lipophilic pectin derivatives. Antimicrobial activity, examined using the disc diffusion method, proved that all polymers were active against Staphylococcus aureus bacterium and Candida albicans yeast.