Modified hydroxyapatite nanoparticles reinforced nanocomposite hydrogels based on gelatin/oxidized alginate via Schiff base reaction

Electrospun "Hard-Soft" Interpenetrating Nanofibrous Tissue Scaffolds Facilitating Enhanced Mechanical Strength and Cell Proliferation

"Soft" hydrogel-based macroporous scaffolds have been widely used in tissue engineering and drug delivery applications due to their hydrated interfaces and macroporous structures, but have drawbacks related to their weak mechanics and often weak adhesion to cells. In contrast, "hard" poly(caprolactone) (PCL) electrospun fibrous networks have desirable mechanical strength and ductility but offer minimal interfacial hydration and thus limited capacity for cell proliferation. Herein, we demonstrate the fabrication of interpenetrating nanofibrous networks based on coelectrospun PCL and poly(oligoethylene glycol methacrylate) (POEGMA) nanofibers that exhibit the mechanical benefits of PCL but the interfacial hydration benefits of hydrogels. The electrospinning process results in partially aligned but interpenetrating fiber network with minimal internal phase separation, leading to anisotropic but strong mechanical properties even in the hydrated state; apparent ultimate tensile strengths of the swollen scaffolds ranged from 429 ± 39 kPa in the direction of fiber alignment (longitudinal) to 86 ± 25 kPa perpendicular to fiber alignment (cross-longitudinal), typical of PCL-based scaffolds and enabling efficient suture retention in different directions. However, contact angle measurements indicate hydrogel-like interfacial properties due to the presence of the interpenetrating POEGMA network. C2C12 myoblast proliferation in the PCL-POEGMA scaffolds was 50% higher than that observed on PCL-only scaffolds, a result attributed to the presence of the more hydrophilic POEGMA interpenetrating nanofiber network. Overall, this method is demonstrated to represent a facile single-step strategy to fabricate strong macroporous but still interfacially hydrophilic scaffolds for tissue engineering applications.

Biomaterials / bioinks and extrusion bioprinting

Bioinks are formulations of biomaterials and living cells, sometimes with growth factors or other biomolecules, while extrusion bioprinting is an emerging technique to apply or deposit these bioinks or biomaterial solutions to create three-dimensional (3D) constructs with architectures and mechanical/biological properties that mimic those of native human tissue or organs. Printed constructs have found wide applications in tissue engineering for repairing or treating tissue/organ injuries, as well as in vitro tissue modelling for testing or validating newly developed therapeutics and vaccines prior to their use in humans. Successful printing of constructs and their subsequent applications rely on the properties of the formulated bioinks, including the rheological, mechanical, and biological properties, as well as the printing process. This article critically reviews the latest developments in bioinks and biomaterial solutions for extrusion bioprinting, focusing on bioink synthesis and characterization, as well as the influence of bioink properties on the printing process. Key issues and challenges are also discussed along with recommendations for future research.

Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices

Ionic conductors (ICs) find widespread applications across different fields, such as smart electronic, ionotronic, sensor, biomedical, and energy harvesting/storage devices, and largely determine the function and performance of these devices. In the pursuit of developing ICs required for better performing and sustainable devices, cellulose appears as an attractive and promising building block due to its high abundance, renewability, striking mechanical strength, and other functional features. In this review, we provide a comprehensive summary regarding ICs fabricated from cellulose and cellulose-derived materials in terms of fundamental structural features of cellulose, the materials design and fabrication techniques for engineering, main properties and characterization, and diverse applications. Next, the potential of cellulose-based ICs to relieve the increasing concern about electronic waste within the frame of circularity and environmental sustainability and the future directions to be explored for advancing this field are discussed. Overall, we hope this review can provide a comprehensive summary and unique perspectives on the design and application of advanced cellulose-based ICs and thereby encourage the utilization of cellulosic materials toward sustainable devices.

Novel electrospun nanofibers based on gelatin/oxidized xanthan gum containing propolis reinforced by Schiff base cross-linking for food packaging

Gelatin-based electrospun fibers are promising materials for food packaging but suffer from high hydrophilicity and weak mechanical properties. To overcome these limitations, in the current study, gelatin-based nanofibers were reinforced by using oxidized xanthan gum (OXG) as a crosslinking agent. The nanofibers' morphology was investigated through SEM, and the observations showed that the fibers' diameter was decreased by enhancing OXG content. The resultant fibers with more OXG content exhibited high tensile stress so the optimal sample obtained showed a tensile stress of 13.24 ± 0.76 MPa, which is up to 10 times more than neat gelatin fiber. Adding OXG to gelatin fibers reduced water vapor permeability, water solubility, and moisture content properties while increasing thermal stability and porosity. Additionally, the nanofibers containing propolis displayed a homogenous morphology with high antioxidant and antibacterial activities. In general, the findings suggested that the designed fibers could be used as a matrix for active food packaging.

Porous Hydrogels: Present Challenges and Future Opportunities

In this feature article, we critically review the physical properties of porous hydrogels and their production methods. Our main focus is nondense hydrogels that have physical pores besides the space available between adjacent cross-links in the polymer network. After reviewing theories on the kinetics of swelling, equilibrium swelling, the structure-stiffness relationship, and solute diffusion in dense hydrogels, we propose future directions to develop models for porous hydrogels. The aim is to show how porous hydrogels can be designed and produced for studies leading to the modeling of physical properties. Additionally, different methods that are used for making hydrogels with physically incorporated pores are briefly reviewed while discussing the potentials, challenges, and future directions for each method. Among kinetic methods, we discuss bubble generation approaches including reactions, gas injection, phase separation, electrospinning, and freeze-drying. Templating approaches discussed are solid-phase, self-assembled amphiphiles, emulsion, and foam methods.

A Shapable Alginate Hydrogel Resolving the Conflicts between Multifunctionality and Fabrication Simplicity

Alginate is a naturally derived biocompatible polymer widely used as a drug or food adjuvant. However, its usage as a biofunctional material has been confounded by the lack of shapable strategies. In this study, we report an easily applied ionic cross-linking strategy for fabricating shapable multifunctional SA-Ca(II) hydrogels employing the process of regulated diffusion. The fabrication proceeds in neutral solutions under ambient conditions. The obtained SA-Ca(II) hydrogel presents tunable moduli ranging from 4 to 30 kPa, resembling a series of human tissues. The tunable mechanical strength provides differentiation signals for stem cell polarization. The hydrogel film can lift a weight of 10 kg. The hydrogel can be prepared into various shapes and remains stable over one year upon rinsing in deionized water, but rapidly degrades in alginate lyase solutions. Subcutaneously embedded SA-Ca(II) hydrogels in mice show high biocompatibility and degrade over 4 weeks accompanied by hair follicle regeneration. Wearable protections as well as stimuli-responsive electronic circuits are then achieved, which not only protect the model body against high-temperature environments but also show warning signals when the protection loses effectiveness because of high temperatures. Overall, these results demonstrate that our SA-Ca(II) hydrogel offers appealing comprehensive functionalities from multifaceted perspectives, including mechanical strength, economic and environmental considerations, transparency, forming capability, biocompatibility, and conductivity.

Enzyme-Triggered Crosslinked Hybrid Hydrogels for Bone Tissue Engineering

The quest to develop state-of-the-art hydrogels for bone tissue engineering has accompanied substantial innovation and significant progression in the field of bioactive hydrogels. Still, there is scope for advancement in this cell-friendly and biocompatible scaffold system. The crosslinking approaches used for hydrogel synthesis plays a decisive role in guiding and regulating the mechanical stability, network framework, macroscopic architect, immunological behaviors, and cellular responses. Until recently, enzyme-based crosslinking strategies were considered as the pinnacle in designing efficient hybrid hydrogel systems. A variety of enzymes have been explored for manufacturing hydrogels while taking the advantage of the biocompatible nature, specificity, ability to produce nontoxic by products and high efficiency of enzymes. The current review focuses on the utility of different enzymes as crosslinking agents for hydrogel formation with their application in bone tissue engineering. The field of enzyme crosslinked hydrogel synthesis is rapidly maturing with a lot of opportunities to be explored in bone tissue engineering. Enzyme-based in situ and externally crosslinked hydrogels for bone regeneration is an attractive field, and with innovation in using engineered enzymes this field will continue to flourish with clinical orientation.

Injectable hydrogels for bone and cartilage tissue engineering: a review

Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel's stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study's main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.