Novel complex hydrogels based on N-carboxyethyl chitosan and quaternized chitosan and their controlled in vitro protein release property

Chitosan-Functionalized Poly(β-Amino Ester) Hybrid System for Gene Delivery in Vaginal Mucosal Epithelial Cells

Gene therapy displays great promise in the treatment of cervical cancer. The occurrence of cervical cancer is highly related to persistent human papilloma virus (HPV) infection. The HPV oncogene can be cleaved via gene editing technology to eliminate carcinogenic elements. However, the successful application of the gene therapy method depends on effective gene delivery into the vagina. To improve mucosal penetration and adhesion ability, quaternized chitosan was introduced into the poly(β-amino ester) (PBAE) gene-delivery system in the form of quaternized chitosan-g-PBAE (QCP). At a mass ratio of PBAE:QCP of 2:1, the polymers exhibited the highest green fluorescent protein (GFP) transfection efficiency in HEK293T and ME180 cells, which was 1.1 and 5.4 times higher than that of PEI 25 kD. At this mass ratio, PBAE-QCP effectively compressed the GFP into spherical polyplex nanoparticles (PQ-GFP NPs) with a diameter of 255.5 nm. In vivo results indicated that owing to the mucopenetration and adhesion capability of quaternized CS, the GFP transfection efficiency of the PBAE-QCP hybrid system was considerably higher than those of PBAE and PEI 25 kD in the vaginal epithelial cells of Sprague-Dawley rats. Furthermore, the new system demonstrated low toxicity and good safety, laying an effective foundation for its further application in gene therapy.

Free Salt Dyeing by Treatment of Cotton Fabric Using Carboxyethyl Chitosan and Synthesized Direct Dyes to Enhance Dyeing Properties and Antibacterial Activity

AIM

The purpose of this paper is to synthesize and characterize two new direct dyes based on chromenes derivatives.

BACKGROUND

The synthesis of carboxyethyl chitosan (CECS) by the reaction of chitosan and acrylic acid via Michael's addition reaction was conducted. Cotton fabrics were treated with CECS to enhance the exhaustion of dye, fastness properties, and antimicrobial activity of dyed fabric.

METHODS

Chitosan (CS) and acrylic acid were combined in Michael's addition process to successfully produce N-carboxyethylchitosan (CECS). Then, the cotton was treated with different concentrations of carboxyethyl chitosan (0.5-5 wt.%) and then dyed by synthesized mono azo and diazo direct dyes based on chromene derivatives.

RESULTS AND DISCUSSION

The results regarding dyeing and antibacterial activity indicated highquality dyeing properties, However, direct dyes showed higher exhaustion and fixation values, fastness properties, and the colorimetric CIE L*a*b* C*h° data of the dyed cotton fabric.

CONCLUSION

Cotton fabrics treated with carboxyethyl chitosan and dyed with direct dyes were found to have higher antibacterial activity upon a concentration of 2.5 wt.%. In addition, the antibacterial activity towards Gram-positive bacteria was reported to be more than Gram-negative bacteria.

Potential use of N-carboxyethylchitosan in biomedical applications: Preparation, characterization, biological properties

N-carboxyethylchitosan (CECS) was successfully prepared via Michael addition reaction of chitosan (CS) with acrylic acid in water. The structure of CECS was characterized by Fourier transform Infra-Red spectrometry (FT-IR), ¹HNMR, elemental analysis, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Differential scanning calorimetry (DSC). Antibacterial activity of CECS was evaluated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by using minimum inhibition concentration (MIC). The results showed that the prepared CECS soluble in water at wide range of pH values. In addition, it has amorphous character improve its chemical reactivity than CS itself, in addition it has been showed stronger antibacterial activity than chitosan itself due to the presence of both -COOH and -NH₂ groups and the CECS shows higher antibacterial activity towards S. aureus than E. coli. Finally, the cytotoxicity of CECS has been evaluated through Cell viability assay, which confirm that CECS is non-toxic and tissue compatible like CS.

Regulation of inflammatory microenvironment using a self-healing hydrogel loaded with BM-MSCs for advanced wound healing in rat diabetic foot ulcers

A diabetic foot ulcer (DFUs) is a state of prolonged chronic inflammation, which can result in amputation. Different from normal skin wounds, various commercially available dressings have not sufficiently improved the healing of DFUs. In this study, a novel self-healing hydrogel was prepared by in situ crosslinking of N-carboxyethyl chitosan (N-chitosan) and adipic acid dihydrazide (ADH) with hyaluronic acid-aldehyde (HA-ALD), to provide a moist and inflammatory relief environment to promote stem cell proliferation or secretion of growth factors, thus accelerating wound healing. The results demonstrated that this injectable and self-healing hydrogel has excellent swelling properties, stability, and mechanical properties. This biocompatible hydrogel stimulated secretion of growth factors from bone marrow mesenchymal stem cells (BM-MSCs) and regulated the inflammatory environment by inhibiting the expression of M1 macrophages and promoting the expression of M2 macrophages, resulting in granulation tissue formation, collagen deposition, nucleated cell proliferation, neovascularization, and enhanced diabetic wound healing. This study showed that N-chitosan/HA-ALD hydrogel could be used as a multifunctional injectable wound dressing to regulate chronic inflammation and provide an optimal environment for BM-MSCs to promote diabetic wound healing.

Preparation of Antimicrobial Hyaluronic Acid/Quaternized Chitosan Hydrogels for the Promotion of Seawater-Immersion Wound Healing

Wound immersion in seawater with high salt, high sodium, and a high abundance of pathogenic bacteria, especially gram-negative bacteria, can cause serious infections and difficulties in wound repair. The present study aimed to prepare a composite hydrogel composed of hyaluronic acid (HA) and quaternized chitosan (QCS) that may promote wound healing of seawater-immersed wounds and prevent bacterial infection. Based on dynamic Schiff base linkage, hydrogel was prepared by mixing oxidized hyaluronic acid (OHA) and hyaluronic acid-hydrazide (HA-ADH) under physiological conditions. With the addition of quaternized chitosan, oxidized hyaluronic acid/hyaluronic acid-hydrazide/quaternized chitosan (OHA/HA-ADH/O-HACC and OHA/HA-ADH/N-HACC) composite hydrogels with good swelling properties and mechanical properties, appropriate water vapor transmission rates (WVTR), and excellent stability were prepared. The biocompatibility of the hydrogels was demonstrated by in vitro fibroblast L929 cell culture study. The results of in vitro and in vivo studies revealed that the prepared antibacterial hydrogels could largely inhibit bacterial growth. The in vivo study further demonstrated that the antibacterial hydrogels exhibited high repair efficiencies in a seawater-immersed wound defect model. In addition, the antibacterial hydrogels decreased pro-inflammatory factors (TNF-α, IL-1β, and IL-6) but enhanced anti-inflammatory factors (TGF-β1) in wound. This work indicates that the prepared antibacterial composite hydrogels have great potential in chronic wound healing applications, such as severe wound cure and treatment of open trauma infections.

Dextran hydrogels by crosslinking with amino acid diamines and their viscoelastic properties

Amine functionalized polysaccharide hydrogels such as those based on chitosan are widely examined as biomaterials. Here we set out to develop a facile procedure for developing such hydrogels by crosslinking dextran with amino acid diamines. The dextran-amino acid gels were formed by the addition of the amino acid diamines to a dextran and epichlorohydrin solution once it became homogeneous. This was demonstrated with three amino acid diamines, lysine, lysine methyl ester, and cystine dimethyl ester. Hydrogel networks with albumin entrapped were also demonstrated. These hydrogels were characterized by FTIR, SEM, rotational rheometry, swelling studies and cell biocompatibility analysis. These hydrogels showed the unexpected pH-responsive behavior of greater swelling at more basic pH, similar to that of an anionic hydrogel. This is uncharacteristic for amine functionalized gels as they typically exhibit cationic hydrogel behavior. All hydrogels showed similar biocompatibility to that of dextran crosslinked without amino acids.

Preparation and Characterization of Quaternized Chitosan Coated Alginate Microspheres for Blue Dextran Delivery

In this study, 2-[(Acryloyloxy)ethyl]trimethylammonium chloride was graft polymerized onto chitosan (CS) to form quaternary ammonium CS (QAC) by using ammonium persulfate as a redox initiator. Alginate (ALG) microspheres loaded with a water-soluble macromolecular model drug, blue dextran (BD), were obtained by corporation of coaxial gas-flow method and ionic gelation process. CS and QAC were then coated on the surfaces of ALG microspheres to generate core/shell structured CS/ALG and QAC/ALG microspheres, respectively. The experiment result showed that QAC/ALG microspheres had a smaller particle size due to the stronger electrostatic interactions between QAC and ALG molecules. In vitro drug release studies at pH 7.4 and pH 9.0 exhibited that the release rate of BD was significantly decreased after ALG microspheres coating with CS and QAC. Moreover, ALG microspheres coated with QAC showed a prolonged release profile for BD at pH 9.0. Therefore, QAC/ALG microspheres may be a promising hydrophilic macromolecular drug carrier for a prolonged and sustained delivery.

Chitosan nanoparticle-based delivery of fused NKG2D-IL-21 gene suppresses colon cancer growth in mice

Nanoparticles can be loaded with exogenous DNA for the potential expression of cytokines with immune-stimulatory function. NKG2D identifies major histocompatibility complex class I chain-related protein in human and retinoic acid early induced transcript-1 in mouse, which acts as tumor-associated antigens. Biologic agents based on interleukin 21 (IL-21) have displayed antitumor activities through lymphocyte activation. The NKG2D-IL-21 fusion protein theoretically identifies tumor cells through NKG2D moiety and activates T cells through IL-21 moiety. In this study, double-gene fragments that encode the extracellular domains of NKG2D and IL-21 genes were connected and then inserted into the pcDNA3.1(-) plasmid. PcDNA3.1-dsNKG2D-IL-21 plasmid nanoparticles based on chitosan were generated. Tumor cells pretransfected with dsNKG2D-IL-21 gene nanoparticles can activate natural killer (NK) and CD8⁺ T cells in vitro. Serum IL-21 levels were enhanced in mice intramuscularly injected with the gene nanoparticles. DsNKG2D-IL-21 gene nanoparticles accumulated in tumor tissues after being intravenously injected for ~4-24 h. Treatment of dsNKG2D-IL-21 gene nanoparticles also retarded tumor growth and elongated the life span of tumor-bearing mice by activating NK and T cells in vivo. Thus, the dsNKG2D-IL-21 gene nanoparticles exerted efficient antitumor activities and would be potentially used for tumor therapy.

Preparation and characterization of chitosan microsphere loading bovine serum albumin

To optimize the preparation process of chitosan microspheres and study its loading capacity, chitosan microsphere was prepared by crosslinking with glutaraldehyde, and bovine serum albumin (BSA) was absorbed onto chitosan microsphere. Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FITR), TA instruments and zeta potentiometer analyzer were used to characterize the parameters with respect to size, thermal characters, morphology, and zeta potential of the microspheres. The loading capability and in vitro release tests were carried out. The results showed that chitosan microsphere with particle size less than 10 μm and positively charged (+25.97±0.56 mV) can be obtained under the aldehyde group to amino group ratio at 1:1. A loading capacity of BSA at 28.63±0.15 g/100 g with corresponding loading efficiency at 72.01±1.44% was obtained for chitosan microsphere. In vitro test revealed a burst release followed by sustained-release profile.

In vitro and in vivo characterisation of a novel peptide delivery system: amphiphilic polyelectrolyte-salmon calcitonin nanocomplexes

The cationic peptide, salmon calcitonin (sCT) was complexed with the cationic amphiphilic polyelectrolyte, poly(allyl)amine, grafted with palmitoyl and quaternary ammonium moieties at pH 5.0 and 7.4 to yield particulates (sCT-QPa). The complexes were approximately 200 nm in diameter, had zeta potentials ranging from +20 to +50 mV, and had narrow polydispersity indices (PDIs). Differential scanning calorimetry revealed the presence of an interaction between sCT and QPa in the complexes. Electron microscopy confirmed the zeta-size data and revealed a vesicular bilayer structure with an aqueous core. Tyrosine- and Nile red fluorescence indicated that the complexes retained gross physical stability for up to 7 days, but that the pH 5.0 complexes were more stable. The complexes were more resistant to peptidases, serum and liver homogenates compared to free sCT. In vitro bioactivity was measured by cAMP production in T47D cells and the complexes had EC50 values in the nM range. While free sCT was unable to generate cAMP following storage for 7 days, the complexes retained approximately 33% activity. When the complexes were injected intravenously to rats, free and complexed sCT (pH 5.0 and 7.4) but not QPa reduced serum calcium over 120 min. Free and complexed sCT but not QPa also reduced serum calcium over 240 min following intra-jejunal administration. In conclusion, sCT-QPa nanocomplexes that have been synthesised are stable, bioactive and resistant to a range of peptidases. These enhanced features suggest that they may have the potential for improved efficacy when formulated for injected and oral delivery.