Hydrophobication and characterisation of O-acetyl-galactoglucomannan for papermaking and barrier applications

Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing

Hemicelluloses, the second most abundant polysaccharide right after cellulose, are in practice still treated as a side-stream in biomass processing industries. In the present study, we report an approach to use a wood-derived and side-stream biopolymer, spruce wood hemicellulose (galactoglucomannan, GGM) to partially replace the synthetic PLA as feedstock material in 3D printing. A solvent blending approach was developed to ensure the even distribution of the formed binary biocomposites. The blends of hemicellulose and PLA with varied ratio up to 25% of hemicellulose were extruded into filaments by hot melt extrusion. 3D scaffold prototypes were successfully printed from the composite filaments by fused deposition modeling 3D printing. Combining with 3D printing technique, the biocompatible and biodegradable feature of spruce wood hemicellulose into the composite scaffolds would potentially boost this new composite material in various biomedical applications such as tissue engineering and drug-eluting scaffolds.

Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing

This paper presents a sustainable all-wood-based ink which can be used for 3D printing of constructs for a large variety of applications such as clothes, furniture, electronics, and health care products with a customized design and versatile gel properties. The 3D printing technologies where the material is dispensed in the form of liquids, so called inks, have proven suitable for 3D printing dispersions of cellulose nanofibrils (CNFs) because of their unique shear thinning properties. In this study, novel inks were developed with a biomimetic approach where the structural properties of cellulose and the cross-linking function of hemicelluloses that are found in the plant cell wall were utilized. The CNF was mixed with xylan, a hemicellulose extracted from spruce, to introduce cross-linking properties which are essential for the final stability of the printed ink. For xylan to be cross-linkable, it was functionalized with tyramine at different degrees. Evaluation of different ink compositions by rheology measurements and 3D printing tests showed that the degree of tyramine substitution and the ratio of CNFs to xylan-tyramine in the prepared inks influenced the printability and cross-linking density. Both two-layered gridded structures and more complex 3D constructs were printed. Similarly to conventional composites, the interactions between the components and their miscibility are important for the stability of the printed and cross-linked ink. Thus, the influence of tyramine on the adsorption of xylan to cellulose was studied with a quartz crystal microbalance to verify that the functionalization had little influence on xylan's adsorption to cellulose. Utilizing xylan-tyramine in the CNF dispersions resulted in all-wood-based inks which after 3D printing can be cross-linked to form freestanding gels while at the same time, the excellent printing properties of CNFs remain intact.

Structure characterization, chemical and enzymatic degradation, and chain conformation of an acidic polysaccharide from Lycium barbarum L

An acidic polysaccharide, named as p-LBP, was isolated from Lycium barbarum L. by water extraction and purified by decoloration, ion exchange chromatography, dialysis and gel chromatography, successively. The primary structure analysis was determined by HPAEC-PAD, HPSEC, FT-IR, GC-MS, and NMR. The results showed p-LBP was a homogeneous heteropolysaccharide as a pectin molecule with an average molecular weight of 64kDa p-LBP was an approximately 87nm hollow sphere in 0.05mol/L sodium sulfate solution determined by HPSEC-MALLS, DLS and TEM. A discussion of degradation patterns gave the detailed structural information of p-LBP. Therefore, the results from degraded fragments elucidated that the backbone of p-LBP was formed by →4-α-GalpA-(1→, repeatedly. Partial region was connected by →4-α-GalpA-(1→ and →2-α-Rhap-(1→, alternatively. On the C-4 of partial →2-α-Rhap-(1→ residues existed branches forming by →4-β-Galp-(1→, →3-β-Galp-(1→ or →5-α-Araf-(1→, while on the C-6 of partial →3-β-Galp-(1→ residues existed secondary branches forming by terminal-α-Araf, terminal-β-Galp or →3-α-Araf-(1→.

Bioinspired composites from cross-linked galactoglucomannan and microfibrillated cellulose: Thermal, mechanical and oxygen barrier properties

In this study, new wood-inspired films were developed from microfibrillated cellulose and galactoglucomannan-lignin networks isolated from chemothermomechanical pulping side streams and cross-linked using laccase enzymes. To the best of our knowledge, this is the first time that cross-linked galactoglucomannan-lignin networks have been used for the potential development of composite films inspired by woody-cell wall formation. Their capability as polymeric matrices was assessed based on thermal, structural, mechanical and oxygen permeability analyses. The addition of different amounts of microfibrillated cellulose as a reinforcing agent and glycerol as a plasticizer on the film performances was evaluated. In general, an increase in microfibrillated cellulose resulted in a film with better thermal, mechanical and oxygen barrier performance. However, the presence of glycerol decreased the thermal stability, stiffness and oxygen barrier properties of the films but improved their elongation. Therefore, depending on the application, the film properties can be tailored by adjusting the amounts of reinforcing agent and plasticizer in the film formulation.

Modification of nanofibrillated cellulose using amphiphilic block-structured galactoglucomannans

Nanofibrillated cellulose (NFC) and hemicelluloses have shown to be highly promising renewable components both as barrier materials and in novel biocomposites. However, the hydrophilic nature of these materials restricts their use in some applications. In this work, the usability of modified O-acetyl galactoglucomannan (GGM) for modification of NFC surface properties was studied. Four GGM-block-structured, amphiphilic derivatives were synthesized using either fatty acids or polydimethylsiloxane as hydrophobic tails. The adsorption of these GGM derivatives was consecutively examined in aqueous solution using a quartz crystal microbalance with dissipation monitoring (QCM-D). It was found that the hydrophobic tails did not hinder adsorption of the GGM derivatives to cellulose, which was concluded to be due to the presence of the native GGM-block with high affinity to cellulose. The layer properties of the adsorbed block-co-polymers were discussed and evaluated. Self-standing NFC films were further prepared and coated with the GGM derivatives and the effect of the surface modification on wetting properties and oxygen permeability (OP) of the modified films was assessed.