Furfural production from rice husk using sulfuric acid and a solid acid catalyst through a two-stage process

Kinetic Models for Glucosamine Production by Acid Hydrolysis of Chitin in Five Mushrooms

In this paper, glucosamine was produced by acid hydrolysis of five mushrooms. The glucosamine yields were investigated, and the optimum conditions were obtained as follows: acid type, sulfuric acid; acid concentration, 6 M; ratio of raw material to acid volume, 1 : 10; hydrolysis temperature, 100°C; and time, 6 h. Under these conditions, the glucosamine conversion from chitin content reached up to 92%. The results of hydrolysis kinetics indicated that hydrolysis of five mushrooms to glucosamine followed zero-order kinetics. Moreover, the relatively low activation energy for hydrolysis of straw mushroom (18.31 kJ/mol) and the highest glucosamine yield (56.8132 ± 3.5748 mg/g DM, 0.9824 g/g chitin) indicated that hydrolysis of straw mushroom was energy-saving. Thus, sulfuric acid hydrolysis of straw mushroom for glucosamine production should be considered as an efficient process for the future industrial application. However, further study is needed for glucosamine purification.

Pretreatment and enzymatic hydrolysis for the efficient production of glucose and furfural from wheat straw, pine and poplar chips

A flexible approach to a two-step Biorefinery for the production of glucose and furfural from three different feedstocks is presented. Pretreatment conditions were selected to drive the production towards the generation of glucose or furfural. Harsh pretreatment conditions produced solids with highly accessible glycan contents for the enzymatic hydrolysis with 100% glucose yields when wheat straw or poplar chips were used as feedstock. Mild conditions afforded xylan-rich hydrolysates that could be efficiently transformed to furfural, either under conventional or microwave heating in biphasic media. Yields for the transformation of xylan from feedstocks ranged between 45% and 90% depending on the feedstock, the thermal pretreatment and the cyclodehydration conditions. Up to 12.6 kg of glucose and materials and 2.5 kg of furfural can be produced starting from 50 kg of biomass. A new analytical methodology based on ¹³C NMR that provided good quality analytical results is also presented.

Bio-MCM-41: a high-performance catalyst support derived from pyrolytic biochar

Bio-MCM-41 was produced from pyrolytic rice husk char in a sequential stepwise method and then used to prepare Cu/Bio-MCM-41 catalyst with good performance.

Review of the rice production cycle: by-products and the main applications focusing on rice husk combustion and ash recycling

One of the consequences of industrial food production activities is the generation of high volumes of waste, whose disposal can be problematic, since it occupies large spaces, and when poorly managed can pose environmental and health risks for the population. The rice industry is an important activity and generates large quantities of waste. The main solid wastes generated in the rice production cycle include straw, husk, ash, bran and broken rice. As such, the aim of this article is to present a review of this cycle, the waste generated and the identification of opportunities to use them. Owing to impacts that can be minimised with the application of rice husk ash as a by-product, this work is focused on the recycling of the main wastes. In order to achieve that, we performed theoretical research about the rice production cycle and its wastes. The findings point to the existence of an environmentally suitable use for all wastes from the rice production cycle. As rice, bran and broken rice have their main use in the food industry, the other wastes are highly studied in order to find solutions instead of landfilling. Straw can be used for burning or animal feeding. The husk can be used for poultry farming, composting or burning. In the case of burning, it has been used as biomass to power reactors to generate thermal or electrical energy. This process generates rice husk ash, which shows potential to be used as a by-product in many different applications, but not yet consolidated.