Plasma-assisted preparation of Ni/SiO2 catalyst using atmospheric high frequency cold plasma jet

Non-thermal plasma synthesis of supported Cu-Mn-Ce mixed oxide catalyst towards highly improved catalytic performance for volatile organic compound oxidation

Compared with that of the transition metal mixed oxide pellet catalyst, the catalytic activity of the supported mixed oxide catalyst was significantly reduced, which was limited in practical industrial applications. In this work, supported Cu-Mn-Ce mixed oxide catalysts were prepared by non-thermal plasma. Catalyst characterization result demonstrated that plasma treatment could promote the proportion of oxygen vacancy and enhance the adsorptive strength of VOCs on the surface of catalyst. Meanwhile, plasma treatment process exerted a slight influence on the pore structure and morphological property of the catalyst. Consequently, CMC/SiO₂-P exhibited much higher catalytic activity than CMC/SiO₂ prepared by the incipient wetness impregnation method for the catalytic oxidation of toluene and n-hexane. Among the catalysts prepared, the 15%CMC/SiO₂-P catalyst even exhibited a high catalytic activity comparable to that of the supported noble metal catalyst for the oxidation of the inert hexane. The T₉₈ of toluene and n-hexane over 15%CMC/SiO₂-P was 260 and 280°C under the conditions of VOC concentration at 1000 ppm and WHSV at 20,000 mL·g^-1·h^-1, respectively. This work provided a novel method for the preparation of the supported transition metal mixed oxide catalyst.

Supported metal and metal oxide particles with proximity effect for catalysis

External influence is essential for any change to occur in this world. Similarly, the reaction path of a chemical reaction can be changed with the addition of a catalyst from outside. Sometimes a catalyst performs better when it remains associated with an inert substance, which is called a support material (SM). Improved catalyst accomplishment arises from the 'proximity effect'. Even inert supports play a role in better product formulation or environmental remediation. In this review, it has been shown how the SM, as a nest, aids the catalyst particle synergistically to perform a good job in a chemical reaction. The structure-function relationship of SM helps in catalyst activation to some extent, and produces active centres that are difficult to fully ascertain. In the text, Langmuir-Hinshelwood (L-H), Mars-van Krevelen (MVK), and Eley-Rideal (E-R) mechanisms are highlighted for the adsorption processes as the case may be. Again, the importance of SM for both catalyst and substrates has been consolidated here in the text. Finally, the role of the initiator and the promoter is also discussed in this review.

High-Resolution SEM and EDX Characterization of Deposits Formed by CH₄+Ar DBD Plasma Processing in a Packed Bed Reactor

The deposits formed during the DBD plasma conversion of CH₄ were characterized by high-resolution scanning electron microscopy (HRSEM) and energy dispersive X-ray elemental analysis (EDX) for both cases of a non-packed reactor and a packed reactor. For the non-packed plasma reactor, a layer of deposits was formed on the dielectric surface. HRSEM images in combination with EDX and CHN elemental analysis of this layer revealed that the deposits are made of a polymer-like layer with a high content of hydrogen (60 at%), possessing an amorphous structure. For the packed reactor, γ-alumina, Pd/γ-alumina, BaTiO₃, silica-SBA-15, MgO/Al₂O₃, and α-alumina were used as the packing materials inside the DBD discharges. Carbon-rich agglomerates were formed on the γ-alumina after exposure to plasma. The EDX mapping furthermore indicated the carbon-rich areas in the structure. In contrast, the formation of agglomerates was not observed for Pd-loaded γ-alumina. This was ascribed to the presence of Pd, which enhances the hydrogenation of deposit precursors, and leads to a significantly lower amount of deposits. It was further found that the structure of all other plasma-processed materials, including MgO/Al₂O₃, silica-SBA-15, BaTiO₃, and α-alumina, undergoes morphological changes. These alterations appeared in the forms of the generation of new pores (voids) in the structure, as well as the moderation of the surface roughness towards a smoother surface after the plasma treatment.

Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane

Dry reforming of methane (DRM) is one of the more promising methods for syngas (synthetic gas) production and co-utilization of methane and carbon dioxide, which are the main greenhouse gases. Magnesium is commonly applied in a Ni-based catalyst in DRM to improve catalyst performance and inhibit carbon deposition. The aim of this review is to gain better insight into recent developments on the use of Mg as a support or promoter for DRM catalysts. Its high basicity and high thermal stability make Mg suitable for introduction into the highly endothermic reaction of DRM. The introduction of Mg as a support or promoter for Ni-based catalysts allows for good metal dispersion on the catalyst surface, which consequently facilitates high catalytic activity and low catalyst deactivation. The mechanism of DRM and carbon formation and reduction are reviewed. This work further explores how different constraints, such as the synthesis method, metal loading, pretreatment, and operating conditions, influence the dry reforming reactions and product yields. In this review, different strategies for enhancing catalytic activity and the effect of metal dispersion on Mg-containing oxide catalysts are highlighted.

Synergistic effects of plasma–catalyst interactions for CH4 activation

Plasma-assisted catalysis populates vibrationally excited CH₄ interacting with catalyst, leading to small energy barriers and enhanced rates to activate CH₄.

Valence variation of phase-pure M1 MoVNbTe oxide by plasma treatment for improved catalytic performance in oxidative dehydrogenation of ethane

This work presents a new method of catalyst surface modification by using oxygen plasma to change the oxidation state of active sites in metal oxide catalysts.