Sol–gel derived V2O5–TiO2 mesoporous materials as catalysts for the total oxidation of chlorobenzene

Structure-property-performance relationship of transition metal doped WO3 mixed oxides for catalytic degradation of organic pollutants

Transition metal doped WO₃ mixed oxides (named as W-M-O, M = Nb, Fe, Cr, Cu, Ti or Sn, respectively) with high structure stability were synthesized by modified sol-gel method using citric acid as organic crosslinking agent, and were evaluated for catalytic elimination of low-concentration toluene, monochlorobenzene and 1,2-dichloroethance with high toxicity and relatively stable molecule structure, as the typical examples for the pollutants of various volatile organic compounds (VOCs). Results of the structure-property-performance relationship research showed that mesoporous structure and nanocrystalline/amorphous state were formed, and binary metal components were dispersed into each other, which contributed to promoting the metal/metal electron interaction and adjusting the physicochemical properties of mixed metal oxides. The sequence of apparent catalytic activity for toluene degradation was: W-Nb-O＞W-Fe-O＞W-Cr-O, W-Cu-O＞W-Ti-O＞W-Sn-O＞WO₃, and the sequence for monochlorobenzene degradation was: W-Nb-O＞W-Fe-O＞W-Cr-O, W-Ti-O＞W-Cu-O＞W-Sn-O＞WO₃. There existed cooperative catalytic effect: mesopore and surface acid sites of catalysts facilitated adsorption, activation and breakage of the C-X bond, and then redox sites of catalysts promoted deep oxidation of a series of reaction intermediates to transform into CO₂ and H₂O. Especially, the optimized W-Nb-O catalyst deserved more attention, since it represented remarkable catalytic activity, selectivity and durability for three typical VOCs degradation along with good resistance to water vapor and corrosion of HCl.

Influence of zirconia addition in TiO2 and TiO2-CeO2 aerogels on the textural, structural and catalytic properties of supported vanadia in chlorobenzene oxidation

This paper studies the effect of the direct incorporation of ZrO₂ in TiO₂ and TiO₂-CeO₂ aerogel supports prepared by sol-gel route on the physico-chemical and catalytic properties of supported vanadia catalysts in the total oxidation of chlorobenzene. The obtained catalysts have been characterized by means of ICP-AES, N₂ adsorption-desorption at 77 K, XRD, XPS, H₂-TPR and NH₃-TPD. The results revealed that Zr-doped V₂O₅ based catalyst is beneficial for the improvement of catalytic properties in chlorobenzene total oxidation. In particular, in the absence of cerium groups, this beneficial effect is correlated with the better acidic properties or/and the stabilization of the V₂O₅ active phase in a higher oxidation state. However, in the case of cerium rich catalyst, this positive effect is much stronger thanks to the enhanced redox properties of V₂O₅/TiO₂-CeO₂-ZrO₂.

A new V2O5–MoO3–TiO2–SO42−nanostructured aerogel catalyst for diesel DeNOxtechnology

A new V₂O₅–MoO₃–TiO₂–SO₄²⁻nanostructured aerogel catalyst exhibits superior SCR activity compared to the V₂O₅–WO₃/TiO₂commercial catalyst (EUROCAT) at high temperatures (375–500 °C).

Catalytic Combustion of Chlorobenzene with VOx/CeO2 Catalysts： Influence of Catalyst Synthesis Method

VOx/CeO2 catalysts with various nanostructure were synthesized by the hydrothermal method and used in catalytic combustion of chlorobenzene (CB) at a low temperature. XRD, BET, TEM, Raman, XPS, and H2-TPR were employed to reveal that catalysts VOx on CeO2 support had considerable activity for CB combustion. VOx/CeO2 catalysts prepared with ammonium to adjust pH value and added P123 as a surfactant, showed the highest CB conversion ratio of 60 % at 250 °C and 100 % at 400 °C. It showed that preparation method could infect the shape evolution and surface species during the synthesis. The new phase CeVO4 formed in VOx/CeO2 catalysts improved the catalysts efficiency by increasing oxygen vacancies.

Versatile Aerogels for Sensors

Aerogels are unique solid-state materials composed of interconnected 3D solid networks and a large number of air-filled pores. They extend the structural characteristics as well as physicochemical properties of nanoscale building blocks to macroscale, and integrate typical characteristics of aerogels, such as high porosity, large surface area, and low density, with specific properties of the various constituents. These features endow aerogels with high sensitivity, high selectivity, and fast response and recovery for sensing materials in sensors such as gas sensors, biosensors and strain and pressure sensors, among others. Considerable research efforts in recent years have been devoted to the development of aerogel-based sensors and encouraging accomplishments have been achieved. Herein, groundbreaking advances in the preparation, classification, and physicochemical properties of aerogels and their sensing applications are presented. Moreover, the current challenges and some perspectives for the development of high-performance aerogel-based sensors are summarized.

V2O5/TiO2 and V2O5/TiO2–SO42− catalysts for the total oxidation of chlorobenzene: one-step sol–gel preparation vs. two-step impregnation

This paper examines the effect of the preparation method of sulfated and unsulfated V₂O₅/TiO₂ catalysts on chlorobenzene total oxidation.

Aerosol processing: a wind of innovation in the field of advanced heterogeneous catalysts

Aerosol processing technologies represent a major route of innovation in the mushrooming field of heterogeneous catalysts preparation.

Innovative Sol-Gel Routes for the Bottom-Up Preparation of Heterogeneous Catalysts

Heterogeneous catalysts can be prepared by different methods offering various levels of control on the final properties of the solid. In this account, we exemplify bottom-up preparation routes that are based on the sol-gel chemistry and allow to tailor some decisive properties of solid catalysts. First, an emulsion templating strategy is shown to lead to macrocellular self-standing monoliths with a macroscopic 3D structure. The latter can be used as catalyst or catalyst supports in flow chemistry, without requiring any subsequent shaping step. Second, the aerosol-assisted sol-gel process allows for the one-step and continuous production of porous mixed oxides. Tailored textural properties can be obtained together with an excellent control on composition and homogeneity. Third, the application of non-hydrolytic sol-gel routes, in the absence of water, leads to mixed oxides with outstanding textural properties and with peculiar surface chemistry. In all cases, the resulting catalytic performance can be correlated with the specificities of the preparation routes presented. This is exemplified in catalytic reactions in the fields of biomass conversion, petro chemistry, enantioselective organic synthesis, and air pollution mitigation.

Rapid synthesis of alkylaminophenols via the Petasis borono–Mannich reaction using protonated trititanate nanotubes as robust solid–acid catalysts

The Petasis borono–Mannich reaction was applied to the synthesis of alkylaminophenols from o-hydroxybenzaldehydes, secondary amines and boronic acids in the presence of H₂Ti₃O₇ nanotubes as reusable solid–acid catalysts.

Efficient solvent free synthesis of tertiary α-aminophosphonates using H2Ti3O7 nanotubes as a reusable solid-acid catalyst

The Kabachnik–Fields reaction was applied for the synthesis of α-aminophosphonates from aldehydes, secondary amines and dialkyl phosphites in the presence of H₂Ti₃O₇ nanotubes as reusable solid-acid catalysts.