Effective catalytic hydrodechlorination of 4-chlorophenol over a Rh immobilized on amine-functionalized magnetite nanoparticles in aqueous phase

Catalytic Hydrodechlorination of 4-Chlorophenol by Palladium-Based Catalyst Supported on Alumina and Graphene Materials

Hydrodechlorination (HDC) is a reaction that involves the use of hydrogen to cleave the C-Cl bond in chlorinated organic compounds such as chlorophenols and chlorobenzenes, thus reducing their toxicity. In this study, a palladium (Pd) catalyst, which is widely used for HDC due to its advantageous physical and chemical properties, was immobilized on alumina (Pd/Al) and graphene-based materials (graphene oxide and reduced graphene oxide; Pd/GO and Pd/rGO, respectively) to induce the HDC of 4-chlorophenol (4-CP). The effects of the catalyst dosage, initial 4-CP concentration, and pH on 4-CP removal were evaluated. We observed that 4-CP was removed very rapidly when the HDC reaction was induced by Pd/GO and Pd/rGO. The granulation of Pd/rGO using sand was also investigated as a way to facilitate the separation of the catalyst from the treated aqueous solution after use, which is to improve practicality and effectiveness of the use of Pd catalysts with graphene-based support materials in an HDC system. The granulated catalyst (Pd/rGOSC) was employed in a column to induce HDC in a continuous flow reaction, leading to the successful removal of most 4-CP after 48 h. The reaction mechanisms were also determined based on the oxidation state of Pd, which was observed using X-ray photoelectron spectroscopy. Based on the results as a whole, the proposed granulated catalyst has the potential to greatly enhance the practical applicability of HDC for water purification.

Mesoporous ferrihydrite-supported Pd nanoparticles for enhanced catalytic dehalogenation of chlorinated environmental pollutant

Organic chlorides are a group of ubiquitous environmental pollutants that have attracted wide attention because of their carcinogenetic effect on human. Catalytic hydrodechlorination represents one of the most promising methods for the removal of these contaminants, but it suffers from drawbacks such as catalytic inefficiency and/or instability, and the danger of using H₂ as hydrogen source. The relationship between the catalyst structure and its dehalogenation activity has not been completely understood. By combining the advantages of Pd nanocatalyst and mesoporous ferrihydrite (Fh) with its distinctive structure, here we present a new composite material with Pd nanoparticles (NPs) supported onto the Fh (Pd/Fh), which has excellent catalytic dehalogenation performance with a rapid, complete dechlorination of chlorophenol (turnover frequency 25.2 min^-1) and the ability to perform well over a wide range of pH and temperature. The superior catalytic property of Pd/Fh can be attributed to the three unique functions of Fh, including: 1) having abundant hydroxyl groups that provide interaction sites with metals for incorporating highly dispersed small Pd NPs; 2) facilitating the fast adsorption of chlorophenol onto the catalyst surface via hydrogen bonding and importantly, 3) working as an electron mediator to greatly enhance the electron transfer from iron or chemicals (e.g., NaBH₄) to the catalyst, thereby achieving a synergistic effect between Pd catalyst and support, and an enhanced dechlorination activity. In essence, this work presents a promising catalyst for the efficient dehalogenation of chlorinated environmental pollutants and provides an insight into the relationship between catalyst structure and dehalogenation activity.

Pd nanoparticles supported on amino-functionalized magnetic mesoporous silica nanotubes: a highly selective catalyst for the catalytic hydrodechlorination reaction

Highly dispersed Pd nanoparticles supported on amine-functionalized magnetic mesoporous silica nanotubes are prepared. This catalyst exhibits remarkable catalytic performance for the HDC reaction.

Convenient preparation of Pd/RGO catalyst for the efficient hydrodechlorination of various chlorophenols

Highly active Pd/RGO (RGO, reduced graphene oxide) was easily prepared by a one pot co-reduction of Pd ions and GO using NaBH₄. The as-prepared catalyst exhibited excellent reactivity towards the degradation of chlorophenols under mild conditions without additives.

Catalytic hydrodechlorination of trichloroethylene in a novel NaOH/2-propanol/methanol/water system on ceria-supported Pd and Rh catalysts

The catalytic hydrodechlorination (HDC) of high concentrations of trichloroethylene (TCE) (4.9 mol%, 11.6 vol%) was studied over 1%Pd, 1%Rh and 0.5%Pd-0.5%Rh catalysts supported on CeO2 under conditions of room temperature and pressure. For this, a one-phase system of NaOH/2-propanol/methanol/water was designed with molar percentages of 13.2/17.5/36.9/27.6, respectively. In this system, the alcohols delivered the hydrogen required for the reaction through in-situ dehydrogenation reactions. PdRh/CeO2 was the most active catalyst for the degradation of TCE among the evaluated materials, degrading 85% of the trichloroethylene, with alcohol dehydrogenation rates of 89% for 2-propanol and 83% for methanol after 1 h of reaction. Fresh and used catalysts were characterized by Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and Thermogravimetric analysis (TGA). These results showed important differences of the active phase in each catalyst sample. Rh/CeO2 had particle sizes smaller than 1 nm and the active metal was partially oxidized (Rh(0)/Rh(+δ) ratio of 0.43). This configuration showed to be suitable for alcohols dehydrogenation. On the contrary, Pd/CeO2 showed a Pd completed oxidized and with a mean particle size of 1.7 nm, which seemed to be unfavorable for both, alcohols dehydrogenation and TCE HDC. On PdRh/CeO2, active metals presented a mean particle size of 2.7 nm and more reduced metallic species, with ratios of Rh(0)/Rh(+δ) = 0.67 and Pd(0)/Pd(+δ) = 0.28, which showed to be suitable features for the TCE HDC. On the other hand, TGA results suggested some deposition of NaCl residues over the catalyst surfaces. Thus, the new reaction system using PdRh/CeO2 allowed for the degradation of high concentrations of the chlorinated compound by using in situ hydrogen liquid donors in a reaction at room temperature and pressure.