Zn–Cr double metal cyanide catalysts synthesized by ball milling for the copolymerization of CO2/propylene oxide, phthalic anhydride/propylene oxide, and CO2/propylene oxide/phthalic anhydride

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Transition Metal Hexacyanoferrate(II) Complexes as Catalysts in the Ring-Opening Copolymerization of CO2 and Propylene Oxide

The catalytic activity of four transition metal hexacyanoferrate(II) complexes (Ni2[Fe(CN)6], Co2[Fe(CN)6], KFe[Fe(CN)6] and Zn2[Fe(CN)6]) in the ring-opening copolymerization (ROCOP) of CO2 and propylene oxide (PO) is reported here for the first time and compared with that of other hexacyanometallate compounds. Complexes were prepared by coprecipitation employing tert-butanol as complexing agent. X-ray diffraction, Fourier-transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, X-ray fluorescence, scanning electron microscopy, transmission electron microscopy and N2 physisorption were used to confirm the identity of the obtained materials. Except for Zn2[Fe(CN)6], which showed an amorphous nature, the complexes were constituted by aggregates of cubic nanocrystals with intra-crystalline micropores and inter-crystalline mesopores. Gas–solid phase titration with NH3 revealed the high potential of hexacyanoferrates as Lewis acid catalysts. In the case of Zn2[Fe(CN)6], the lack of structural organization led to an extremely high density of acid sites (43 μmol m−2). The resulting copolymers were analyzed via nuclear magnetic resonance spectroscopy and gel permeation chromatography. The studied transition metal hexacyanoferrate(II) catalysts showed mild activity in the target reaction, giving rise to polyethercarbonates with moderate CO2 content (9.3–18.1 wt%), random configuration (67.0–92.4% of polyethercarbonate linkages), modest molecular weights (MW, g mol−1 = 3400–20,200) and high dispersity (ĐM = 4.0–5.4). Cyclic propylene carbonate (PC) was also produced (1.4–19.8 wt%). Among all, the Co2[Fe(CN)6] complex stands as a potential catalyst for CO2/PO ROCOP due to its high CO2 uptake, selectivity and molecular weight of the obtained copolymer.

Porous Hexacyanometallate(III) Complexes as Catalysts in the Ring-Opening Copolymerization of CO2 and Propylene Oxide

In this work, six porous hexacyanometallate complexes (Ni3[Co(CN)6]2, Co3[Co(CN)6]2, Fe3[Co(CN)6]2, Ni3[Fe(CN)6]2, Co3[Fe(CN)6]2, Fe4[Fe(CN)6]2) were synthesized by a complexing agent assisted coprecipitation method and thoroughly characterized via X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), in situ high-temperature X-ray diffraction (HT-XRD), elemental analysis (EA), X-ray fluorescence (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 physisorption, and gas–solid phase titration with NH3. The thermal stability, chemical composition, pore size and volume, crystallite size and density of surface acid sites were strongly sensitive to both the transition metal and the cyanometallate anion employed. On that basis, transition metal hexacyanometallates must be perceived as an adaptable class of zeolite-like microporous materials. The catalytic properties of these compounds were tested by copolymerization of propylene oxide and CO2, a green route to obtain biodegradable aliphatic polycarbonates. All compounds under study showed moderate activity in the target reaction. The obtained copolymers were characterized by modest CO2 content (carbonate units ranging from 16 to 33%), random structure (RPEC ≈ 70%), and moderate molecular weight (Mw = 6000–85,400 g/mol) with broad dispersity values (ĐM = 4.1–15.8).

Cat-CrNP as new material with catalytic properties for 2-chloro-2-propen-1-ol and ethylene oligomerizations

The contemporary search for new catalysts for olefin oligomerization and polymerization is based on the study of coordinating compounds and/or organometallic compounds as post-metallocene catalysts. However known catalysts are suffered by many flaws, among others unsatisfactory activity, requirement of high pressure or instability at high temperatures. In this paper, we present a new catalyst i.e. the crystalline complex compound possesing high catalytic activity in the oligomerization of olefins, such as 2-chloro-2-propen-1-ol and ethylene under very mild conditions (room temperature, 0.12 bar for ethylene oligomerization, atmospheric pressure for 2-chloro-2-propen-1-ol oligomerization). New material—Cat-CrNP ([nitrilotriacetato-1,10-phenanthroline]chromium(III) tetrahydrate) has been obtained as crystalline form of the nitrilotriacetate complex compound of chromium(III) with 1,10-phenanthroline and characterized in terms of its crystal structure by the XRD method and by multi-analytical investigations towards its physicochemical propeties The yield of catalytic oligomerization over Cat-CrNP reached to 213.92 g · mmol⁻¹ · h⁻¹· bar⁻¹ and 3232 g · mmol⁻¹ · h⁻¹ · bar⁻¹ for the 2-chloro-2-propen-1-ol and ethylene, respectively. Furthemore, the synthesis of Cat-CrNP is cheap, easy to perform and solvents used during preparation are environmentally friendly.

Co-Ni Cyanide Bi-Metal Catalysts: Copolymerization of Carbon Dioxide with Propylene Oxide and Chain Transfer Agents

Synthesis of copolymers from carbon dioxide (CO2) and epoxides is an important research direction as such processes utilize the abundant greenhouse gas and deliver useful products. Specifically, cooligomers of CO2 and propylene oxide (PO) with a non-alternating structure can be used for polyurethane preparation. They are synthesized by employing Zn-Co cyanide catalysts. The application of alternative metal cyanide complexes is interesting from scientific and practical points of view. The purpose of this work was to study the copolymerization of CO2 and PO in the presence of Co-Ni cyanide catalysts and chain transfer agents (CTAs) in order to obtain low molecular weight products. Three Co-Ni catalysts with different contents of complexing agents were synthesized, characterized by several analytical methods and applied for this reaction. The complex without complexing agents was chosen for detailed investigation. 1,6-Hexanediol proved to be a more preferred CTA than poly(propylene glycol) and adipic acid. An oligo(ethercarbonate) (Mn = 2560, PDI = 2.5, CO2 = 20 mol.%) capped with OH groups was synthesized with relatively high productivity (1320 gPO+CO2/gcat in 24 h) and characterized by matrix-assisted laser desorption/ionization (MALDI) MS and NMR methods. The main chain transfer routes during the cooligomerization were suggested on the basis of the research results.

Advances in the use of CO2 as a renewable feedstock for the synthesis of polymers

Carbon dioxide offers an accessible, cheap and renewable carbon feedstock for synthesis. Current interest in the area of carbon dioxide valorisation aims at new, emerging technologies that are able to provide new opportunities to turn a waste into value. Polymers are among the most widely produced chemicals in the world greatly affecting the quality of life. However, there are growing concerns about the lack of reuse of the majority of the consumer plastics and their after-life disposal resulting in an increasing demand for sustainable alternatives. New monomers and polymers that can address these issues are therefore warranted, and merging polymer synthesis with the recycling of carbon dioxide offers a tangible route to transition towards a circular economy. Here, an overview of the most relevant and recent approaches to CO2-based monomers and polymers are highlighted with particular emphasis on the transformation routes used and their involved manifolds.

Co-Aromatization of n-Butane and Methanol over PtSnK-Mo/ZSM-5 Zeolite Catalysts: The Promotion Effect of Ball-Milling

The ball-milling (BM) method benefits the stabilization and dispersion of metallic particles for the preparation of the PtSnK–Mo/ZSM-5 catalyst. Based on the TPR, H2-TPD, XPS, and CO-FTIR results, the Pt–SnOx and MoOx species were formed separately on the BM sample. During the aromatization of cofeeding the n-butane with methanol, the yield of the aromatics is 59 wt.% at a n-butane conversion of 86% at 475 °C over the Pt Mo BM catalyst. The more weak acid sites also contribute to the aromatics formation with the less light alkanes formation. For the Pt Ga catalysts, the slow loss of activity suggests that the BM method can restrain the coke deposition on the Pt-SnOx species, because of a certain distance between the Pt–SnOx and GaOx species on the surface of ZSM-5.