An efficient Ce-doped MoO3 catalyst and its photo-thermal catalytic synergetic degradation performance for dye pollutant

Embedding Co in perovskite MoO3 for superior catalytic oxidation of refractory organic pollutants with peroxymonosulfate

A cobalt (Co)-doped perovskite molybdenum trioxide (α-MoO₃) catalyst (Co-MO) was synthesized by a facile pyrolysis strategy and used for degrading various organic contaminants via peroxymonosulfate (PMS) activation. The doped Co was inserted in the inter space between the octahedron [MoO₆], facilitating the growth of the α-MoO₃ crystal on the [010] direction. This unique structure accelerated the activation of PMS as the Co-MO could function as a carrier for electron transfer to facilitate the Co(II)/Co(III) cycle in the Co-MO/PMS system. As a result, the Co-MO/PMS system showed noticeable activity for removing 100% bisphenol A (BPA) under a broad conditions within 30 min. The radical quenching test and electron paramagnetic resonance analysis revealed that singlet oxygen (¹O₂) was the main active species for BPA degradation in the Co-MO/PMS system, while free radicals, such as O₂^•-, SO₄^•- and •OH, were also produced as the intermediate species. Furthermore, the carrier mechanism may enable the Co-MO/PMS system maintain relatively high performance during repeat use, and also excellent adaptability was revealed by the well function in various water matrices and high activity in degrading various refractory organic pollutants. Our findings pave a useful avenue for the rational design of novel cobalt-doped catalysts with high catalytic performance toward wide environmental applications.

Synthesis and defect engineering of molybdenum oxides and their SERS applications

Surface-enhanced Raman scattering (SERS) spectroscopy has been developed into a cross-disciplinary analytical technology through exploring various materials' Raman vibrational modes with ultra-high sensitivity and specificity. Although conventional noble-metal based SERS substrates have achieved great success, oxide-semiconductor-based SERS substrates are attracting researchers' intensive interest due to their merits of facile fabrication, high uniformity and tunable SERS characteristics. Among all the SERS active oxide semiconductors, molybdenum oxides (MoO_x) possess exceptional advantages of high Raman enhancement factor, environmental stability, recyclable detection, etc. More interestingly, the SERS effect of the MoO_x SERS substrates may involve both the electromagnetic enhancement mechanism and the chemical enhancement mechanism, which is determined by the stoichiometry and morphology of the material. Therefore, the focus of this review will be on two critical points: (1) synthesis and material engineering methods of the functional MoO_x material and (2) MoO_x SERS mechanism and performance evaluation. First, we review recent works on the MoO_x preparation and material property tuning approaches. Second, the SERS mechanism and performance of various MoO_x substrates are surveyed. In particular, the performance uniformity, enhancement factor and recyclability are evaluated. In the end, we discuss several challenges and open questions related to further promoting the MoO_x as the SERS substrate for monitoring extremely low trace molecules and the theory for better understanding of the SERS enhancement mechanism.

Ce-based catalysts used in advanced oxidation processes for organic wastewater treatment: A review

Refractory organic pollutants in water threaten human health and environmental safety, and advanced oxidation processes (AOPs) are effective for the degradation of these pollutants. Catalysts play vital role in AOPs, and Ce-based catalysts have exhibited excellent performance. Recently, the development and application of Ce-based catalysts in various AOPs have been reported. Our study conducts the first review in this rapid growing field. This paper clarifies the variety and properties of Ce-based catalysts. Their applications in different AOP systems (catalytic ozonation, photodegradation, Fenton-like reactions, sulfate radical-based AOPs, and catalytic sonochemistry) are discussed. Different Ce-based catalysts suit different reaction systems and produce different active radicals. Finally, future research directions of Ce-based catalysts in AOP systems are suggested.

Photocatalytic Conversion of Lignin into Chemicals and Fuels

Lignin, an underutilized component of lignocellulosic biomass, is regarded as a rich reservoir for the production of aromatic chemicals and fuels. Despite extensive research in recent years, lignin's potential is far from being fully unlocked. Photocatalysis that uses sustainable solar energy to drive lignin conversion under mild conditions has been identified as a promising strategy and received growing research interest. This review aims to present a critical introduction to the photocatalytic conversion of lignin, including a summary of lignin conversion pathways and mechanisms, as well as the latest cutting-edge innovations on photocatalyst design and reactor construction. Moreover, the screening of solvents and regulation of other key factors that are involved in photocatalytic lignin conversion are also elucidated and future perspectives and challenges for photocatalytic conversion of lignin into valuable products are discussed.

Photothermal conversion assisted photocatalytic hydrogen evolution from amorphous carbon nitrogen nanosheets with nitrogen vacancies

Amorphous carbon nitrogen (a-CN) has attracted a lot of attention due to its unique properties, different from those of its crystal form. Here, we demonstrate a near-infrared (NIR) photothermal conversion assisted photocatalytic hydrogen evolution from a-CN with nitrogen vacancies (a-CNN) nanosheets. Experiments suggest that sp2 hybridized C[double bond, length as m-dash]C structures can be created in a-CNN. These structures, just like small islands, disperse on a-CNN, leading to fluorescence quenching and a superior vis-NIR light absorption. Meanwhile, these structures, like "hot islands", can generate a stronger NIR photothermal conversion. A series of in situ characterization techniques are developed to clarify the detailed mechanism of photothermal conversion assisted photocatalytic hydrogen evolution. It is found that photothermal conversion can not only accelerate the drift velocity of the photo-induced carrier, but also increase the carrier concentration, which finally promotes the photocatalytic hydrogen evolution. Due to photothermal conversion assistance, the hydrogen production rate of a-CNN nanosheets is promoted to 3.1 mmol g-1 h-1 compared to 0.71 mmol g-1 h-1 for a-CN, in which the NIR photothermal conversion is proven to contribute a 16% promotion to the hydrogen production. These findings suggest that creating an NIR photothermal conversion of photocatalysts by constructing "hot islands" can greatly promote photocatalytic hydrogen production.

The Novel Z-Scheme Ternary-Component Ag/AgI/α-MoO3 Catalyst with Excellent Visible-Light Photocatalytic Oxidative Desulfurization Performance for Model Fuel

The novel ternary-component Ag/AgI/α-MoO₃ (AAM) photocatalyst was successfully fabricated by a facile hydrothermal method combined with a charge-induced physical adsorption and photo-reduced deposition technique. X-ray diffraction, scanning/transmission electron microscope, X-ray photoelectron, UV-vis diffuse reflectance, photoluminescence and electrochemical impedance spectroscopy were employed to characterize the composition, morphology, light-harvesting properties and charge transfer character of the as-synthesized catalysts. The ternary-component AAM heterojunctions exhibited an excellent visible-light photocatalytic oxidative desulfurization activity, in which the AAM-35 (35 represents weight percent of AgI in AAM sample) possessed the highest photocatalytic activity of the conversion of 97.5% in 2 h. On the basis of band structure analysis, radical trapping experiments and electron spin resonance (ESR) spectra results, two different catalytic mechanisms were suggested to elucidate how the photogenerated electron-hole pairs can be effectively separated for the enhancement of photocatalytic performance for dual composites AM-35 and ternary composites AAM-35 during the photocatalytic oxidative desulfurization (PODS) of thiophene. This investigation demonstrates that Z-scheme Ag/AgI/α-MoO₃ will be a promising candidate material for refractory sulfur aromatic pollutant’s removal in fossil fuel.

Molybdenum Oxides - From Fundamentals to Functionality

The properties and applications of molybdenum oxides are reviewed in depth. Molybdenum is found in various oxide stoichiometries, which have been employed for different high-value research and commercial applications. The great chemical and physical characteristics of molybdenum oxides make them versatile and highly tunable for incorporation in optical, electronic, catalytic, bio, and energy systems. Variations in the oxidation states allow manipulation of the crystal structure, morphology, oxygen vacancies, and dopants, to control and engineer electronic states. Despite this overwhelming functionality and potential, a definitive resource on molybdenum oxide is still unavailable. The aim here is to provide such a resource, while presenting an insightful outlook into future prospective applications for molybdenum oxides.

pH-regulated template-free assembly of Sb4O5Cl2 hollow microsphere crystallites with self-narrowed bandgap and optimized photocatalytic performance

Sb₄O₅Cl₂ hollow microspheres with self-narrowed bandgap and optimized photocatalytic performances are synthesized via a facile template-free method. It is found that the crystal structure and morphology of Sb₄O₅Cl₂ crystallites are strongly dependent on the pH values of precursors. Nano-sized irregular-cuboids assembled Sb₄O₅Cl₂ micro-particles and hollow microspheres can be synthesized at pH 1 and 2, whereas individual Sb₄O₅Cl₂ micro-belts become to form when the pH is higher than 3. The irregular-cuboids assembled Sb₄O₅Cl₂ micro-particles and hollow microspheres exhibit self-narrowed bandgap and higher light absorption ability compared with individual Sb₄O₅Cl₂ micro-belts. The photoelectrochemical measurements show that the assembled Sb₄O₅Cl₂ hollow microsphere crystallites prepared at pH 2 exhibit enhanced carrier density, improved separation efficiency of electron-hole pairs and decreased electron-transfer resistance. As a result, the irregular-cuboids assembled Sb₄O₅Cl₂ hollow microspheres prepared at pH = 2 exhibit the highest photocatalytic activity for the degradation of gaseous iso-propanol (IPA) and Rhodamine B (RhB) aqueous solution. The good photocatalytic activity of Sb₄O₅Cl₂ sample prepared at pH = 2 may be caused by the synergistic effect of its higher light absorption, the decreased electron-transfer resistance, the suppressed recombination of photogenerated electrons and holes, and the increased surface area.