Enhancement in oxidative property on amorphous rare earth doped Mn catalysts

A plasma thermal slag-derived from hazardous waste has a born hydrothermal stability

Hydrothermal instability restricts performances of silica-based catalysts, which have wide applications in both industry and environment. For the first time, plasma-thermal slag was revealed to be a catalyst with a born hydrothermal stability in selective catalytic reduction of nitric oxide. The slag catalyst removed 98.5 % of NO with a high N₂ selectivity (> 95 %) at 200 °C. After a hydrothermal treatment at 900 °C, the activity of the slag only decreased to 84.0 %. According to characterizations of XRD, HTREM, XPS, and EPR, active metals existed in coordination states in the slag at first. Under hydrothermal conditions, these species transformed to short-range single crystals, which were hindered from sintering by surrounded Si-O bands. At the same time, in-situ DRIFT indicated that more Brønsted and Lewis acid sites were formed. Hence, enough active sties were reserved for effective catalytic reduction of nitric oxide. The main result of this work helps us to understand hydrothermal stability of a catalyst. What's more, the high-value-added utilization of plasma-thermal slag is in favor of the development of hazardous-waste treatment.

Recent advances in selective catalytic oxidation of nitric oxide (NO-SCO) in emissions with excess oxygen: a review on catalysts and mechanisms

Nitric oxides (NO_x, which mainly include more than 90% NO) are one of the major air pollutants leading to a series of environmental problems, such as acid rain, haze, photochemical smog, etc. The selective catalytic oxidation of NO to NO₂ (NO-SCO) is regarded as a key process for the development of selective catalytic reduction of NO_x by ammonia (via fast selective catalytic reduction reaction) and also the simultaneous removal of multipollutant (pre-oxidation and post-absorption). Until now, scholars have developed various types of NO-SCO catalysts, dividing the main groups into noble metals (Pt, Pd, Ru, etc.), metal oxides (Mn-, Co-, Cr-, Ce-based, etc.), perovskite-type oxides (LaMnO₃, LaCoO₃, LaCeCoO₃, etc.), carbon materials (activated carbon, carbon fiber, carbon nanotube, graphene, etc.), and zeolites (ion-exchanged ZSM-5, CHA, SAPO, MCM-41, etc.) in this review. This paper summarizes the recent progress of the above typical catalysts and mostly analyzes the catalytic performance for NO oxidation in terms of the H₂O and/or SO₂ resistances and also the influencing factors, and their reaction mechanisms are described in detail. Finally, this review points out the key problems and possible solutions of the current researches and presents the application prospects and future development directions of NO-SCO technology using the above typical catalysts.

Catalytic oxidation of nitric oxide (NO) over different catalysts: an overview

Nitrogen oxides (mainly NO) are one of the major air pollutants that lead to a number of environmental problems such as photochemical smog, acid rain and haze.

Investigation of the active sites for NO oxidation reactions over MnOx–CeO2 catalysts

Mn⁴⁺/Mn³⁺ is the active site for NO oxidation reactions, according to the TOF calculated with respect to the initial reducibility measured by H₂-TPR quantification.