A novel Cr/WO3-ZrO2 catalyst for the selective catalytic reduction of NOx with NH3

Advances in air pollution control for key industries in China during the 13th five-year plan

Industrial development is an essential foundation of the national economy, but the industry is also the largest source of air pollution, of which power plants, iron and steel, building materials, and other industries emit large amounts of pollutants. Therefore, the Chinese government has promulgated a series of stringent emission regulations, and it is against this backdrop that research into air pollution control technologies for key industrial sectors is in full swing. In particular, during the 13th Five-Year Plan, breakthroughs have been made in pollution control technology for key industrial sectors. A multi-pollutant treatment technology system of desulfurization, denitrification, and dust collection, which applies to key industries such as power plants, steel, and building materials, has been developed. High-performance materials for the treatment of different pollutants, such as denitrification catalysts and desulfurization absorbers, were developed. At the same time, multi-pollutant synergistic removal technologies for flue gas in various industries have also become a hot research topic, with important breakthroughs in the synergistic removal of NO_x, SO_x, and Hg. Due to the increasingly stringent emission standards and regulations in China, there is still a need to work on the development of multi-pollutant synergistic technologies and further research and development of synergistic abatement technologies for CO₂ to meet the requirements of ultra-low emissions in industrial sectors.

Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world's building material industries, the control of flue gas pollutants mainly focuses on a single pollutant. However, given the large capacity and high contribution of China's building materials industry to global air pollution, the need to develop multi-pollutant emission reduction technology is urgent. Recently, China has focused on reducing the emissions of flue gas pollutants in the building materials industry, established many key research and development projects, and gradually implemented more stringent pollutant emission limits. This project focuses on the most recent advances in flue gas emission control technology in China's building materials industry, including denitration, dust removal, desulfurization, synergistic multi-pollutant emission reduction, and the construction of pilot research and demonstration projects for pollutant removal in several building material industries. On this basis, revised pollutant limits in flue gas emitted in China's building material industry are proposed.

Starch bio-template synthesis of W-doped CeO2 catalyst for selective catalytic reduction of NOx with NH3: influence of ignition temperature

A novel tungsten-doped CeO₂ catalyst was fabricated via the sweet potato starch bio-template spread self-combustion (SSC) method to secure a high NH₃-SCR activity. The study focuses on the influence of ignition temperature on the physical structure and redox properties of the synthesized catalyst and the catalytic performance of NO_x reduction with NH₃. These were quantitatively examined by conducting TG-DSC measurements of the starch gel, XRD analysis for the crystallites, SEM and TEM assessments for the morphology of the catalyst, XPS and H₂-TPR measurements for the distribution of cerium and tungsten, and NH₃-TPD assessments for the acidity of the catalyst. It is found that the ignition temperature shows an important role in the interaction of cerium and tungsten species, and the optimal ignition temperature is 500 °C. The increase of ignition temperature from 150 °C is beneficial to the interactions of species in the catalyst, depresses the formation of WO₃, and refines the cubic CeO₂ crystallite. The sample ignited at 500 °C shows the biggest BET surface area, the highest surface concentration of Ce species and molar ratio of Ce³⁺/(Ce³⁺+Ce⁴⁺), and the most abundant surface Brønsted acid sites, which are the possible reasons for the superiority of the NH₃-SCR activity. With a high GHSV of 200,000 mL (g h)^-1 and the optimal ignition temperature, Ce₄W₂O_z-500 can achieve a steadily high NO_x reduction of 80% or more at a lowered reduction temperature in the range of 250~500 °C.

A review on fabricating functional materials by heavy metal-containing sludges

With the development of industry, sustainable use of natural resources has become a worldwide hot topic. Heavy metal-containing sludge (HMS) is a hazardous waste after wastewater treatment. At present, HMS is still treated by landfill or landfill after incineration. Considering the components, HMS usually contains various heavy metals and organic compounds, which is potentially used as a raw resource for catalyst production. This review thus concludes recent reports and developments in this field. First, basic technologies are summarized as component regulation, precursor formation, and structure transformations. Second, prepared materials are applied in various catalytic fields, such as gas purification, photocatalysis, electrocatalysis, and Fenton catalysis. During these processes, key factors are multi-metallic components, metal doping, temperature, and pH. They not only influence the formation of HMS-derived catalyst but also the catalytic activity. Furthermore, catalytic activities of HMS-derived catalysts are compared with those synthesized by pure reagents. An assessment and accounting are also supplied if raw resources are substituted by HMS. Finally, in order to apply HMS in a real application, more works must be devoted to the influence of trace metal doping on catalytic activities and stabilities. Besides, more pilot experiments are urgently necessary.