Enhanced Fischer-Tropsch activity in ammonium nitrate pretreated cobalt-silica catalyst

Effect of Modification of Amorphous Silica with Ammonium Agents on the Physicochemical Properties and Hydrogenation Activity of Ir/SiO2 Catalysts

The modification of commercial silica with solutions of NH₄F or NH₄Cl salts, followed by thermal treatment, enabled generation of the acidic sites in SiO₂ and changed its textural properties. The use of ammonium salts solution also caused the generation of additional porosity. Using NH₄F solution caused significant decrease in the specific surface area and the increase in the average pore diameter. The number and strength of resulting acid sites depend on the nature of anion in the applied ammonium salt and the concentration of salt solution. It has been found that the sample treated with NH₄F presented higher total acidity (TPD–NH₃) and the amount as well as the strength of acid sites increased with the concentration of the used modifier. As modified amorphous SiO₂ materials used as a support for iridium (1 wt %, Ir(acac)₃) nanoparticles permitted to obtain highly active catalysts for toluene hydrogenation under atmospheric pressure. The highest activity (expressed as the apparent rate and TOF) was obtained for iridium catalysts supported on silica modified by NH₄F with the highest acidity. The modification of silica with NH₄F favors the generation of centers able to adsorb toluene, which results in higher activity of this catalyst.

Mesoporous KIT-6 supported Cr and Co-based catalysts for microwave-assisted non-oxidative ethane dehydrogenation

In the present study, mono and bi-metallic catalysts containing Cr and Co were prepared by impregnating the hydrothermally prepared mesoporous KIT-6 support with 5–10 wt% total metal content. The well-ordered three-dimensional mesoporous structure of the KIT-6 support was confirmed by small angle X-ray diffraction (XRD) patterns. N2 adsorption-desorption analysis results showed that the mesoporous structure of KIT-6 was preserved after metal loading. Structural bonds of KIT-6 support and prepared catalysts were determined by Fourier-transform infrared (FT-IR) spectroscopy. The pyridine adsorbed diffuse reflectance FT-IR (DRIFT) spectroscopy results revealed the presence of Lewis acid sites on the surface of the catalysts. Activity experiments were carried out in a microwave-heated continuous-flow fixed bed reactor system at temperature range of 350–650 °C and feed ratios of Ethane/Argon: 1/2, 1/1, 2/1 with a gas hourly space velocity (GHSV) of 18,000 ml/h.gcat. The 5Cr@KIT-6 catalyst exhibited high ethane conversion (63.5%) while the highest ethylene/hydrogen ratio (0.98) was obtained with the 2.5Cr2.5Co@KIT-6 catalyst at 450 °C. It was concluded that high temperatures (above 450 °C) facilitate the formation of side reactions and the production of aromatic compounds. The high catalytic activities of mesoporous catalysts were thought to be due to hot spots in the microwave reactor system.