Efficient aerobic oxidation of ethylbenzene accelerated by cu species in hydrotalcite

Ultrathin organic solvent nanofiltration membrane with polydopamine-HKUST-1 interlayer for organic solvent separation

Polydopamine (PDA) and metal-organic skeleton HKUST-1 were co-deposited on the base membrane of hexamethylenediamine (HDA)-crosslinked polyetherimide (PEI) ultrafiltration membrane as the interlayer, and high-throughput organic solvent nanofiltration membrane (OSN) was prepared by interfacial polymerization and solvent activation reaction. The polyamide (PA) layer surface roughness from 28.4 nm in PA/PEI to 78.3 nm in PA/PDA-HKUST-10.6/PEI membrane, reduced the thickness of the separation layer from 79 to 14 nm, and significantly improved the hydrophilic, thermal and mechanical properties. The flux of the PA/PDA-HKUST-10.6/PEI membrane in a 0.1 g/L Congo Red (CR) ethanol solution at 0.6 MPa test pressure reached 21.8 L/(m2·hr) and the rejection of CR was 92.8%. Solvent adsorption test, N, N-dimethylformamide (DMF) immersion experiment, and long-term operation test in ethanol showed that the membranes had high solvent tolerance. The solvent flux test demonstrated that, under the test pressure of 0.6 MPa, the flux of different solvents ranked as follows: methanol (56.9 L/(m2·hr)) > DMF (39.6 L/(m2·hr)) > ethanol (31.2 L/(m2·hr)) > IPA (4.5 L/(m2·hr)) > N-hexane (1.9 L/(m2·hr)). The ability of the membranes to retain dyes in IPA/water dyes solution was also evaluated. The flux of the membrane was 30.4 L/(m2·hr) and the rejection of CR was 91.6% when the IPA concentration reached 50%. This OSN membrane-making strategy is economical, environment-friendly and efficient, and has a great application prospect in organic solvent separation systems.

Coupled Interface and Oxygen-Defect Engineering in Co3O4/CoMoO4 Heterostructures toward Active Oxidation of Ethylbenzene

The catalytic oxidation of ethylbenzene (EB) is a promising route to produce acetophenone (AcPO). Unfortunately, it remains a great challenge to achieve the highly efficient oxidation of EB under solvent-free conditions using molecular oxygen as the sole oxidant. In this contribution, we present a facile strategy to construct hierarchical oxygen vacancy-rich Co3O4/CoMoO4 heterostructures (Vö-CCMO), which delivers a high yield value of 74.5% at 83.2% conversion of EB and selectivity of 89.6% to AcPO. Both experimental studies and theoretical calculations substantiate the important role of oxygen-defect engineering triggered by the modified chemistry environment at the interfaces between the biphasic phases, which contributes to the good catalytic performance. This work illustrates a promising paradigm for the exploit of advanced catalysts toward boosting EB oxidation reaction in a more practical way.

Cobalt Encapsulated in Nitrogen-Doped Graphite-like Shells as Efficient Catalyst for Selective Oxidation of Arylalkanes

Selective oxidation of ethylbenzene to acetophenne is an important process in both organic synthesis and fine chemicals diligence. The cobalt-based catalysts combined with nitrogen-doped carbon have received great attention in ethylbenzene (EB) oxidation. Here, a series of cobalt catalysts with metallic cobalt nanoparticles (NPs) encapsulated in nitrogen-doped graphite-like carbon shells (Co@NC) have been constructed through the one-pot pyrolysis method in the presence of different nitrogen-containing compounds (urea, dicyandiamide and melamine), and their catalytic performance in solvent-free oxidation of EB with tert-butyl hydrogen peroxide (TBHP) as an oxidant was investigated. Under optimized conditions, the UCo@NC (urea as nitrogen source) could afford 95.2% conversion of EB and 96.0% selectivity to acetophenone, and the substrate scalability was remarkable. Kinetics show that UCo@NC contributes to EB oxidation with an apparent activation energy of 32.3 kJ/mol. The synergistic effect between metallic cobalt NPs and nitrogen-doped graphite-like carbon layers was obviously observed and, especially, the graphitic N species plays a key role during the oxidation reaction. The structure-performance relationship illustrated that EB oxidation was a free radical reaction through 1-phenylethanol as an intermediate, and the possible reaction mechanistic has been proposed.

Transition Metal Salts of Carboxylated Multiwalled Carbon Nanotubes in Combination with N-hydroxyphthalimide as Catalytic Systems for Hydrocarbon Oxidation

In this study, the transition metal (Co (II), Cu (II), and Mn (II)) salts of carboxylated carbon nanotubes were synthesized and characterized (the determined metal contents were in the range of 0.89-1.16%). The catalytic activity and the possibility for recovery and reuse of the obtained heterogeneous salts were then studied in the solvent-free oxidation of ethylbenzene with oxygen. The oxidation processes were carried out at 80 °C under atmospheric pressure in the presence of N-hydroxyphthalimide. The highest conversion of ethylbenzene, 27%, was obtained with a system consisting of the Cu (II) salt of the carboxylated carbon nanotubes, N-hydroxyphthalimide, and the azo initiator AIBN.

Covalent anchoring of N-hydroxyphthalimide on silica via robust imide bonds as a reusable catalyst for the selective aerobic oxidation of ethylbenzene to acetophenone

N-Hydroxyphthalimide is anchored on commercial silica by robust imide bonds, and the synthesized N-oxyl catalysts exhibit excellent activity, selectivity and reusability for the aerobic oxidation of ethylbenzene to acetophenone.