One-pot hydrothermal synthesis of a novel Pt@CeO2 nanocomposite for water-gas shift reaction

Cerium Oxide on a Fluorinated Carbon-Based Electrode as a Promising Catalyst for Hypochlorite Production

Sodium hypochlorite (NaOCl) is widely used as a disinfectant agent for water treatment and surface cleaning. A straightforward way to produce NaOCl is by the electrolysis of an aqueous sodium chloride (NaCl) solution. This process presents several side reactions decreasing its efficiency with hypochlorite reduction on the cathode surface being one of the main detrimental reactions. In this work, we have studied carbon-based electrodes modified with cerium oxide (CeO₂), fluorine, and platinum nanoparticles as cathodes for hypochlorite production. Fluorination was carried out electrochemically; the polyol method was used to synthesize platinum nanoparticles; and the hydrothermal process was applied to form a CeO₂ layer. Scanning electron microscopy, FTIR, and inductively coupled plasma (ICP) indicated the presence of cerium oxide as a film, fluorine groups on the substrate, and a load of 3.2 mg/cm² of platinum nanoparticles and 2.7 mg/cm² of CeO₂. From electrochemical impedance spectroscopy, it was possible to demonstrate that incorporating platinum and fluorine decreases the charge transfer resistance by 16% and 28%, respectively. Linear sweep voltammetry showed a significant decrease in hypochlorite reduction when the substrate was doped with fluorine from -16.6 mA/cm² at -0.6 V to -9.64 mA/cm² that further reduced to -8.78 mA/cm² with cerium oxide covered fluorinated electrodes. The performance of the cathode materials during hypochlorite production improved by 80% compared with pristine activated carbon cloth (ACC) electrodes. The improvement toward hindering NaOCl reduction is probably caused by the incorporation of a partial negative charge upon doping with fluorine.

Rapid electrochemical detection of MiRNA-21 facilitated by the excellent catalytic ability of Pt@CeO2 nanospheres

Pt@CeO2 nanospheres (NSs) were first synthesized by simply mixing Ce(NO3)3 and K2PtCl4 under the protection of pure argon at 70 °C for 1 h, which exhibited excellent catalytic ability toward hydrogen peroxide (H2O2). An electrochemical biosensor was successfully developed using Pt@CeO2 NSs as a capture probe for the ultra-sensitive and fast detection of miRNA-21, a new type of biomarker for disease diagnostics, especially for cancer. During the step-by-step construction process of the RNA sensor, Pt@CeO2 NSs were functionalized with streptavidin (SA) to obtain SA-Pt@CeO2 NSs through amide bonds. Gold nanoparticles (Au NPs) were electrodeposited on the surface of the glassy carbon electrode to improve the transmission capacity of electrons and provided Au atoms for fixing the thiolated capture probe (SH-CP) with a hairpin structure on the electrode via forming Au-S bonds. The target miRNA-21 specifically hybridized with SH-CP and opened the hairpin structure to form a rigid duplex so as to activate the biotin at the end of the capture probe. SA-Pt@CeO2 NSs were thus specially attached to the electrode surface through the biotin-streptavidin affinity interaction, finally leading to the significant signal amplification. The ultra-sensitive and rapid detection of miRNA-21 was finally realized as expected benefiting from the excellent catalytic ability of Pt@CeO2 NSs toward H2O2 in a wide linear concentration range from 10 fM to 1 nM with the detection limit as low as 1.41 fM. The results achieved with this new RNA sensor were quite satisfactory during the blood sample analysis.

Modification strategies of heterogeneous catalysts for water-gas shift reactions

Featured by high energy density, hydrogen has been deemed as a clean and renewable energy source compared with conventional fossil fuels. Water-gas shift reaction (WGSR) exhibits great potential in the...