Evidence of active species in CO oxidation catalyzed by highly dispersed supported gold

Measuring and directing charge transfer in heterogenous catalysts

Precise control of charge transfer between catalyst nanoparticles and supports presents a unique opportunity to enhance the stability, activity, and selectivity of heterogeneous catalysts. While charge transfer is tunable using the atomic structure and chemistry of the catalyst-support interface, direct experimental evidence is missing for three-dimensional catalyst nanoparticles, primarily due to the lack of a high-resolution method that can probe and correlate both the charge distribution and atomic structure of catalyst/support interfaces in these structures. We demonstrate a robust scanning transmission electron microscopy (STEM) method that simultaneously visualizes the atomic-scale structure and sub-nanometer-scale charge distribution in heterogeneous catalysts using a model Au-catalyst/SrTiO₃-support system. Using this method, we further reveal the atomic-scale mechanisms responsible for the highly active perimeter sites and demonstrate that the charge transfer behavior can be readily controlled using post-synthesis treatments. This methodology provides a blueprint for better understanding the role of charge transfer in catalyst stability and performance and facilitates the future development of highly active advanced catalysts.

Insight into the Properties of Plasmonic Au/TiO2 Activated by O2/Ar Plasma

The performance of CO oxidation over plasmonic Au/TiO₂ photocatalysts is largely determined by the electric discharge characteristics and physicochemical properties of discharge gas. To explore the activation mechanism of Au/TiO₂, an O₂ and Ar mixture gas as a discharge gas was employed to activate Au/TiO₂. The photocatalytic activity in CO oxidation over activated Au/TiO₂ was obtained, and the electric discharge characteristics, Au nanoparticle size, surface chemical state, optical property and CO chemisorption were thoroughly characterized. As the O₂ content increases from 10% to 50%, the amplitude of the current pulses increases, but the number of pulses and the discharge power decrease. The photocatalytic activity of Au/TiO₂ rises rapidly at first and then remains constant at 75% when the O₂ content is above 50%. Compared with the discharge gas of 10% and 30% O₂/Ar, the sample activated by 50% O₂/Ar plasma possesses less metallic Au and more surface oxygen species and carbonate species by X-ray photoelectron spectroscopy, which is consistent with UV-vis diffuse reflectance spectra and CO chemisorption. The CO chemisorption capacities of the activated samples are the same at a long exposure time due to the approximate Au nanoparticle size observed by transmission electron microscopy. An increase in carbonate species generated from the oxygen species on the surface of TiO₂ is discovered.

An Au8 Cluster Fortified by Four Ferrocenes

Atomically precise metal clusters are now in the research spotlight, owing to the precise correlation between the physicochemical properties and their atomic-packing structures at an atomic-level. Herein we synthesized an Au₈ cluster capped by four ferrocene ligands (DPPF), in which the ferrocene not only can direct the precise formation of the Au₈ cluster, but also can solidify the structural pattern of the Au₈ cluster. The Au₈(DPPF)₄ clusters as heterogeneous catalysts can achieve efficiently catalytic performances for the CO oxidation reaction, mainly due to the resistance to aggregation into large particles under reaction conditions. Our results suggest that the homolytic phosphine dissociation nature and the postdissociation reconstruction effect induced by Fe may enhance the catalytic performances of Au₈(DPPF)₄.

An Ultrasensitive Plasmonic Nanosensor for Aldehydes

Glucose is the most common but important aldehyde, and it is necessary to create biosensors with high sensitivity and anti-interference to detect it. Under the existence of silver ions and aldehyde compounds, single gold nanoparticles and freshly formed silver atoms could respectively act as core and shell, which finally form a core-shell structure. By observing the reaction between glucose and Tollens' reagent, metallic silver was found to be reduced on the surface of gold nanoparticles and formed Au@Ag nanoparticles that lead to a direct wavelength shift. Based on this principle and combined with in situ plasmon resonance scattering spectra, a plasmonic nanosensor was successfully applied in identifying aldehyde compounds with excellent sensitivity and specificity. This ultrasensitive sensor was successfully further utilized to detect blood glucose in mice serum samples, exhibiting good anti-interference ability and great promise for future clinical application.

Diphosphine-Protected Au22 Nanoclusters on Oxide Supports Are Active for Gas-Phase Catalysis without Ligand Removal

Investigation of atomically precise Au nanoclusters provides a route to understand the roles of coordination, size, and ligand effects on Au catalysis. Herein, we explored the catalytic behavior of a newly synthesized Au₂₂(L⁸)₆ nanocluster (L = 1,8-bis(diphenylphosphino) octane) with in situ uncoordinated Au sites supported on TiO₂, CeO₂, and Al₂O₃. Stability of the supported Au₂₂ nanoclusters was probed structurally by in situ extended X-ray absorption fine structure (EXAFS) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and their ability to adsorb and oxidize CO was investigated by IR absorption spectroscopy and a temperature-programmed flow reaction. Low-temperature CO oxidation activity was observed for the supported pristine Au₂₂(L⁸)₆ nanoclusters without ligand removal. Density functional theory (DFT) calculations confirmed that the eight uncoordinated Au sites in the intact Au₂₂(L⁸)₆ nanoclusters can chemisorb both CO and O₂. Use of isotopically labeled O₂ demonstrated that the reaction pathway occurs mainly through a redox mechanism, consistent with the observed support-dependent activity trend of CeO₂ > TiO₂ > Al₂O₃. We conclude that the uncoordinated Au sites in the intact Au₂₂(L⁸)₆ nanoclusters are capable of adsorbing CO, activating O₂, and catalyzing CO oxidation reaction. This work is the first clear demonstration of a ligand-protected intact Au nanocluster that is active for gas-phase catalysis without the need of ligand removal.

Heterogeneous catalysis for green chemistry based on nanocrystals

Modern society has an ever-increasing demand for environmentally friendly catalytic processes. Catalysis research is working towards a solution through the development of effective heterogeneous catalysts for environment-related applications. Nanotechnologies have provided effective strategies for the preparation of nanocrystals (NCs) with well-defined sizes, shapes and compositions. Precise control of these NCs provides an important foundation for the studies of structure-performance relationships in catalysis, which is critical to the design of NCs with optimized catalytic performances for practical applications. We focus on recent advances in the development of bottom-up strategies to control NCs structures for some key catalytic applications, including CO oxidation, selective oxidation of alcohols, semihydrogenation of alkynes, and selective hydrogenation of unsaturated aldehydes and nitrobenzene. These key applications have been a popular research focus because of their significance in green chemistry. Herein we also discuss the scientific understandings of the active species and active structures of these systems to gain an insight for rational design of efficient catalytic systems for these catalytic reactions.

Au/3DOM Co3O4: highly active nanocatalysts for the oxidation of carbon monoxide and toluene

Three-dimensionally ordered macroporous Co3O4 (3DOM Co3O4) and its supported gold (xAu/3DOM Co3O4, x = 1.1-8.4 wt%) nanocatalysts were prepared using the polymethyl methacrylate-templating and bubble-assisted polyvinyl alcohol-protected reduction methods, respectively. The 3DOM Co3O4 and xAu/3DOM Co3O4 samples exhibited a surface area of 22-27 m(2) g(-1). The Au nanoparticles with a size of 2.4-3.7 nm were uniformly deposited on the macropore walls of 3DOM Co3O4. There were good correlations of oxygen adspecies concentration and low-temperature reducibility with catalytic activity of the sample for CO and toluene oxidation. Among 3DOM Co3O4 and xAu/3DOM Co3O4, the 6.5Au/3DOM Co3O4 sample performed the best, giving a T90% (the temperature required for achieving a conversion of 90%) of -35 °C at a space velocity of 20 000 mL g(-1) h(-1) for CO oxidation and 256 °C at a space velocity of 40 000 mL g(-1) h(-1) for toluene oxidation. The effect of water vapor was more significant in toluene oxidation than in CO oxidation. The apparent activation energies (26 and 74 kJ mol(-1)) over 6.5Au/3DOM Co3O4 were lower than those (34 and 113 kJ mol(-1)) over 3DOM Co3O4 for CO and toluene oxidation, respectively. It is concluded that the higher oxygen adspecies concentration, better low-temperature reducibility, and strong interaction between Au and 3DOM Co3O4 were responsible for the excellent catalytic performance of 6.5Au/3DOM Co3O4.

Plasmon resonance scattering spectroscopy at the single-nanoparticle level: real-time monitoring of a click reaction

A method based on plasmon resonance Rayleigh scattering (PRRS) spectroscopy and dark-field microscopy (DFM) was established for the real-time monitoring of a click reaction at the single-nanoparticle level. Click reactions on the surface of single gold nanoparticles (GNPs) result in interparticle coupling, which leads to a red-shift of the λmax (Δλmax =43 nm) in the PRRS spectra and a color change of the single gold nanoparticles in DFM (from green to orange).

Role of iron carbonyls in the inhibition of oxygen activation for the oxidation of CO catalyzed by iron oxide-supported gold

Iron oxide-supported gold samples were prepared by co-precipitation from HAuCl(4) and Fe(NO(3))(3). The activities of the samples as CO oxidation catalysts were tested without thermal treatment and following treatments in flows of He and O(2) at various temperatures. It was found that the untreated samples and those treated in a flow of He at 150 °C were more active than samples that had been treated at 400 °C in either a flow of O(2) or of He. Infrared spectra recorded during CO oxidation catalysis indicate the presence of bonded CO molecules to cationic gold on all samples, whereas spectra of the least active catalysts indicate a predominant presence of Fe(2+) carbonyls, which were highly stable under the conditions of our experiments. Our results indicate that in the least active samples the Fe(2+)-bound CO blocks sites that would otherwise be available for oxygen activation.

Raman analysis of mode softening in nanoparticle CeO(2-δ) and Au-CeO(2-δ) during CO oxidation

Oxygen vacancy levels are monitored during the oxidation of CO by CeO(2-δ) nanorods and Au-CeO(2-δ) nanorods, nanocubes, and nanopolyhedra by using Raman scattering. The first-order CeO(2) F(2g) peak near 460 cm(-1) decreases when this reaction is fast (fast reduction and relatively slow reoxidation of the surface), because of the lattice expansion that occurs when Ce(3+) replaces Ce(4+) during oxygen vacancy creation. This shift correlates with reactivity for CO oxidation. Increases in the oxygen deficit δ as large as ~0.04 are measured relative to conditions when the ceria is not reduced.

Determination of CO, H2O and H2 coverage by XANES and EXAFS on Pt and Au during water gas shift reaction

The turn-over-rate (TOR) for the water gas shift (WGS) reaction at 200 degrees C, 7% CO, 9% CO(2), 22% H(2)O, 37% H(2) and balance Ar, of 1.4 nm Au/Al(2)O(3) is approximately 20 times higher than that of 1.6 nm Pt/Al(2)O(3). Operando EXAFS experiments at both the Au and Pt L(3) edges reveal that under reaction conditions, the catalysts are fully metallic. In the absence of adsorbates, the metal-metal bond distances of Pt and Au catalysts are 0.07 A and 0.13 A smaller than those of bulk Pt and Au foils, respectively. Adsorption of H(2) or CO on the Pt catalysts leads to significantly longer Pt-Pt bond distances; while there is little change in Au-Au bond distance with adsorbates. Adsorption of CO, H(2) and H(2)O leads to changes in the XANES spectra that can be used to determine the surface coverage of each adsorbate under reaction conditions. During WGS, the coverage of CO, H(2)O, and H(2) are obtained by the linear combination fitting of the difference XANES, or DeltaXANES, spectra. Pt catalysts adsorb CO, H(2), and H(2)O more strongly than the Au, in agreement with the lower CO reaction order and higher reaction temperatures.

Direct observation of chemical reactions on single gold nanocrystals using surface plasmon spectroscopy

Heterogeneous catalysts have been pivotal to the development of the modern chemical industry and are essential for catalysing many industrial reactions. However, reaction rates are different for every individual catalyst particle and depend upon each particle's morphology and size, crystal structure and composition. Measuring the rates of reaction on single nanocrystals will enable the role of catalyst structure to be quantified. Here, using surface plasmon spectroscopy, we have directly observed the kinetics of atomic deposition onto a single gold nanocrystal and also monitored electron injection and extraction during a redox reaction involving the oxidation of ascorbic acid on a gold nanocrystal surface. These results constitute the first direct measurement of the rates of redox catalysis on single nanocrystals.

Insights into the oxidation and decomposition of CO on Au/alpha-Fe2O3 and on alpha-Fe2O3 by coupled TG-FTIR

CO oxidation and decomposition behaviors over nanosized 3% Au/alpha-Fe2O3 catalyst and over the alpha-Fe2O3 support were studied in situ via thermogravimetry coupled to on-line FTIR spectroscopy (TG-FTIR), which was used to obtain temperature-programmed reduction (TPR) curves and evolved gas analysis. The catalyst was prepared by a sonication-assisted Au colloid based method and had a Au particle size in the range of 2-5 nm. Carburization studies of H 2-prereduced samples were also made in CO gas. According to gravimetry, for the 3% Au/alpha-Fe2O3 catalyst, there were three distinct stages of CO interaction with the Au catalyst but only two stages for the catalyst support. At low temperatures (<or=100 degrees C), only the Au catalyst had a rapid weight loss, which confirmed that CO reacted with highly active absorbed oxygen species and/or OH species which were associated with and promoted by the Au nanoparticles. Around 300 degrees C, both the catalyst and support samples experienced the reduction of Fe2O3 to Fe3O4, while above 400 degrees C further reduction to FeO and Fe metal took place. Au played no part in the kinetics of Fe3O4 formation because lattice O mobility was rate-limiting. At higher temperature where Fe3O4 was further reduced to FeO and Fe 0, the initially formed metallic Fe 0 nuclei could decompose CO molecules and release O species. Both this coproduced O species and the lattice oxygen could react with CO molecules. Thus, the CO oxidation was not limited by the mobility of lattice oxygen, and the catalytic function of Au was revealed again. Carburization of metallic Fe, created by prereduction in H 2, revealed a distinct weight gain at 350 degrees C corresponding to Fe 3C formation, as subsequently confirmed by X-ray diffraction (XRD). Sustained carbon deposition ensued at 450 degrees C. In the cases of the 3% Au/gamma-Al 2O 3 and Au/ZrO 2 catalysts prepared by the same method, however, after exposure to CO in the same temperature range, no carbon deposit was observed, indicating that although Au nanoparticles could activate the absorbed oxygen molecules at low temperatures, they were not able to activate the lattice oxygen in the three catalyst supports or to dissociate the CO molecules directly.

Catalysis by gold dispersed on supports: the importance of cationic gold

There are many examples of catalysis in solution by cationic complexes of gold, and recent results, reviewed here in this critical review, demonstrate that cationic gold species on oxide and zeolite supports are also catalytically active, for reactions including ethylene hydrogenation and CO oxidation. The catalytically active gold species on supports are evidently not restricted to isolated mononuclear gold complexes, but include gold clusters, which for at least some reactions are more active than the mononuclear complexes and for some reactions less active. Fundamental questions remain about the nature of cationic gold in supported catalysts, such as the nature of the cationic gold clusters and the nature of gold atoms at metal-support interfaces (88 references).