Photoactive titania nanostructured thin films: Synthesis and characteristics of ordered helical nanocoil array

Towards artificial leaves for solar hydrogen and fuels from carbon dioxide

The development of an "artificial leaf" that collects energy in the same way as a natural one is one of the great challenges for the use of renewable energy and a sustainable development. To avoid the problem of intermittency in solar energy, it is necessary to design systems that directly capture CO(2) and convert it into liquid solar fuels that can be easily stored. However, to be advantageous over natural leaves, it is necessary that artificial leaves have a higher solar energy-to-chemical fuel conversion efficiency, directly provide fuels that can be used in power-generating devices, and finally be robust and of easy construction, for example, smart, cheap and robust. This review discusses the recent progress in this field, with particular attention to the design and development of 'artificial leaf' devices and some of their critical components. This is a very active research area with different concepts and ideas under investigation, although often the validity of the considered solutions it is still not proven or the many constrains are not fully taken into account, particularly from the perspective of system engineering, which considerably limits some of the investigated solutions. It is also shown how system design should be included, at least at a conceptual level, in the definition of the artificial leaf elements to be investigated (catalysts, electrodes, membranes, sensitizers) and that the main relevant aspects of the cell engineering (mass/charge transport, fluid dynamics, sealing, etc.) should be also considered already at the initial stage because they determine the design and the choice between different options. For this reason, attention has been given to the system-design ideas under development instead of the molecular aspects of the O(2) - or H(2) -evolution catalysts. However, some of the recent advances in these catalysts, and their use in advanced electrodes, are also reported to provide a more complete picture of the field.

Comparison of the rate capability of nanostructured amorphous and anatase TiO2 for lithium insertion using anodic TiO2 nanotube arrays

Nanostructured amorphous and anatase TiO2 are both considered as high rate Li-insertion/extraction electrode materials. To clarify which phase is more desirable for lithium ion batteries with both high power and high density, we compare the electrochemical properties of anatase and amorphous TiO2 by using anodic TiO2 nanotube arrays (ATNTAs) as electrodes. With the same morphological features, the rate capacity of nanostructured amorphous TiO2 is higher than that of nanostructured anatase TiO2 due to the higher Li-diffusion coefficient of amorphous TiO2 as proved by the electrochemical impedance spectra of an amorphous and an anatase ATNTA electrode. The electrochemical impedance spectra also prove that the electronic conductivity of amorphous TiO2 is lower than that of anatase TiO2. These results are helpful in the structural and componential design of all TiO2 mesoporous structures as anode material in lithium ion batteries. Moreover, all the advantages of the amorphous ATNTA electrode including high rate capacity, desirable cycling performance and the simplicity of its fabrication process indicate that amorphous ATNTA is potentially useful as the anode for lithium ion batteries with both high power and high energy density.

Oxide thin films based on ordered arrays of 1D nanostructure. A possible approach toward bridging material gap in catalysis

TiO(2) thin films based on ordered arrays of 1D nanostructures (nanorods, nanotubes) are proposed as suitable model materials in studies for bridging material and complexity gap in catalysis. The samples were prepared by anodic oxidation of Ti foils. By changing the preparation conditions (pH, procedure of application of the potential), different types of 1D nanostructure and different characteristics of the ordered array of these 1D nanostructures could be obtained. This allows studying the effect of nanodimension and 3D nanoarchitecture on the characteristics and reactivity of these catalysts. It is also shown that TiO(2) thin films characterized by a well-ordered array of titania nanorod behave as photonic materials, thus showing unique properties of light harvesting efficiency.