FT-IR characterization of supported Ni-catalysts: Influence of different supports on the metal phase properties

Dolomite industrial by-products as active material for CO2 adsorption and catalyst for the acetone condensation

The feasibility of using dolomite powders, by-product from the refractory industry, as a CO2 adsorbent and as a catalyst for the acetone liquid-phase self-condensation is demonstrated in this article. The performance of this material can be largely improved by combining physical pretreatments (hydrothermal ageing, sonication) and thermal activation at different temperatures (500-800 °C). The highest CO2 adsorption capacity was observed for the sample after sonication and activated at 500 °C (46 mg·g-1). As to the acetone condensation, the best results were obtained also with the sonicated dolomites, mainly after activation at 800 °C (17.4% of conversion after 5 h at 120 °C). The kinetic model reveals that this material optimizes the equilibrium between catalytic activity (proportional to the total basicity) and deactivation by water (specific adsorption process). These results demonstrate that the valorisation of dolomite fines is feasible, proposing attractive pretreatments for obtaining activated materials with promising results as adsorbents and basic catalysts.

Cobalt-Nickel Nanoparticles Supported on Reducible Oxides as Fischer-Tropsch Catalysts

Efficient and more sustainable production of transportation fuels is key to fulfill the ever-increasing global demand. In order to achieve this, progress in the development of highly active and selective catalysts is fundamental. The combination of bimetallic nanoparticles and reactive support materials offers unique and complex interactions that can be exploited for improved catalyst performance. Here, we report on cobalt-nickel nanoparticles on reducible metal oxides as support material for enhanced performance in the Fischer-Tropsch synthesis. For this, different cobalt to nickel ratios (Ni/(Ni + Co): 0.0, 0.25, 0.50, 0.75, or 1.0 atom/atom) supported on reducible (TiO₂ and Nb₂O₅) or nonreducible (α-Al₂O₃) oxides were studied. At 1 bar, Co-Ni nanoparticles supported on TiO₂ and Nb₂O₅ showed stable catalytic performance, high activities and remarkably high selectivities for long-chain hydrocarbons (C₅₊, ∼80 wt %). In contrast, catalysts supported on α-Al₂O₃ independently of the metal composition showed lower activities, high methane production, and considerable deactivation throughout the experiment. At 20 bar, the combination of cobalt and nickel supported on reducible oxides allowed for 25-50% cobalt substitution by nickel with increased Fischer-Tropsch activity and without sacrificing much C₅₊ selectivity. STEM-EDX and IR of adsorbed CO pointed to a cobalt enrichment of the nanoparticle's surface and a weaker adsorption of CO in Co-Ni supported on TiO₂ and Nb₂O₅ and not on α-Al₂O₃, modifying the rate-determining step and the catalytic performance. Overall, we show the strong effect and potential of reducible metal oxides as support materials for bimetallic nanoparticles for enhanced catalytic performance.

Mechanism and catalytic performance for direct dimethyl ether synthesis by CO2 hydrogenation over CuZnZr/ferrierite hybrid catalyst

Direct synthesis of dimethyl ether (DME) by CO₂ hydrogenation has been investigated over three hybrid catalysts prepared by different methods: co-precipitation, sol-gel, and solid grinding to produce mixed Cu, ZnO, ZrO₂ catalysts that were physically mixed with a commercial ferrierite (FER) zeolite. The catalysts were characterized by N₂ physisorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption of CO₂ (CO₂-TPD), temperature programmed desorption of NH₃ (NH₃-TPD), and temperature programmed H₂ reduction (H₂-TPR). The results demonstrate that smaller CuO and Cu crystallite sizes resulting in better dispersion of the active phases, higher surface area, and lower reduction temperature are all favorable for catalytic activity. The reaction mechanism has been studied using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Methanol appears to be formed via the bidentate-formate (b-HCOO) species undergoing stepwise hydrogenation, while DME formation occurs from methanol dehydration and reaction of two surface methoxy groups.

Ni-loaded nanocrystalline ceria-zirconia solid solutions prepared via modified Pechini route as stable to coking catalysts of CH4 dry reforming

Mixed nanocrystalline Ce-Zr-O oxides (Ce/Zr = 1 or 7/3) were prepared by modified Pechini route using ethylene glycol solutions of metal salts. Detailed characterization of their real structure and surface properties by X-ray diffraction on synchrotron radiation with the full-profile Rietveld analysis, high resolution electron microscopy with elemental analysis, Raman spectroscopy, UV-Vis and X-ray photoelectron spectroscopy revealed a high homogeneity of cations distribution in nanodomains resulting in stabilization of disordered cubic phase. This provides a high dispersion of NiO loaded on these mixed oxides by wet impregnation, a high reactivity and mobility of oxygen in these catalysts and strong interaction of Ni with support in the reduced state. This helps to achieve a high activity and coking stability of developed catalysts in CH4 dry reforming in feeds with CH4 concentration up to 15% and CH4/CO2 ratio =1.