Mesoporous plasmonic Au-loaded Ta2O5 nanocomposites for efficient visible light photocatalysis

Enhanced solar-driven photoelectrochemical water splitting using nanoflower Au/CuO/GaN hybrid photoanodes

Harnessing solar energy for large-scale hydrogen fuel (H2) production shows promise in addressing the energy crisis and ecological degradation. This study focuses on the development of GaN-based photoelectrodes for efficient photoelectrochemical (PEC) water splitting, enabling environmentally friendly H2 production. Herein, a novel nanoflower Au/CuO/GaN hybrid structure was successfully synthesized using a combination of methods including successive ionic layer adsorption and reaction (SILAR), RF/DC sputtering, and metal-organic chemical vapour deposition (MOCVD) techniques. Structural, morphological, and optical characteristics and elemental composition of the prepared samples were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Vis spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy, respectively. PEC and electrochemical impedance measurements were performed for all samples. The nanoflower Au/CuO/GaN hybrid structure exhibited the highest photocurrent density of ∼4 mA cm-2 at 1.5 V vs. RHE in a Na2SO4 electrolyte with recorded moles of H2 of about 3246 μmol h-1 cm-2. By combining these three materials in a unique structure, we achieved improved performance in the conversion of solar energy into chemical energy. The nanoflower structure provides a large surface area and promotes light absorption while the Au, CuO, and GaN components contribute to efficient charge separation and transfer. This study presents a promising strategy for advancing sustainable H2 production via efficient solar-driven water splitting.

Proceeding of catalytic water splitting on Cu/Ce@g-C3N4 photocatalysts: an exceptional approach for sunlight-driven hydrogen generation

Increasing energy demands and environmental problems require carbon-free and renewable energy generation systems. For this purpose, we have synthesized efficient photocatalysts (i.e., g-C3N4, Cu@g-C3N4, Ce@g-C3N4 and Cu/Ce@g-C3N4) for H2 evolution from water splitting. Their optical, structural and electrochemical properties were investigated by UV-Vis-DRS, PL, XRD, FTIR, Raman and EIS methods. Their surface morphologies were evaluated by AFM and SEM analyses. Their chemical characteristics, compositions and stability were assessed using XPS, EDX and TGA techniques. Photoreactions were performed in a quartz reactor (150 mL/Velp-UK), whereas hydrogen generation activities were monitored using a GC-TCD (Shimadzu-2014/Japan). The results depicted that Cu/Ce@g-C3N4 catalysts are the most active catalysts that deliver 23.94 mmol g-1 h-1 of H2. The higher rate of H2 evolution was attributed to the active synergism between Ce and Cu metals and the impact of surface plasmon electrons (SPEs) of Cu that were produced during the photoreaction. The rate of H2 production was optimized by controlling various factors, including the catalyst amount, light intensity, pH, and temperature of the reaction mixture. It has been concluded that the current study holds promise to replace the conventional and costly catalysts used for hydrogen generation technologies.

Kinetic pathways of sub-bandgap induced electron transfer in Ag/TiO2 and the effect on isopropanol dehydrogenation under gaseous conditions

Electron transfer and its kinetics play a major role in the photocatalysis of metal/semiconductor systems. Using in situ photoconductances, in situ photoabsorption, and photoinduced spectroscopic techniques, the present research aimed to gain a deep insight into electron transfer pathways and their kinetics for Ag/TiO2 systems under sub-bandgap light illumination and gaseous conditions. The results revealed that electrons generated in TiO2 can transfer to Ag nanoparticles at fast rates, and plasmon-generated electrons in Ag nanoparticles can also transfer to TiO2. However, it was found that plasmon-assisted hot electron transfer efficiency is much lower than the electron transition from the valence band to the conduction band of TiO2. Rather than plasmonic active spots, the results showed that Ag nanoparticles acted as co-catalyst sites bridging electron transfer to recombination in a methanol-containing N2 atmosphere. As a result, photocatalytic isopropanol dehydrogenation was decreased. Independent of Ag decorations, it was also indicated that isopropanol dehydrogenation mainly occurred over TiO2 surfaces; therefore, Ag nanoparticles did not increase photocatalytic activities. Our results may provide a different viewpoint on sub-bandgap light-induced Ag/TiO2 photocatalysis under gaseous conditions; this may also facilitate the understanding of the photocatalytic mechanism of metal/semiconductor systems.

Biohybrid Molecule-Based Photocatalysts for Water Splitting Hydrogen Evolution

The problems of resource depletion and environmental pollution caused by the excessive use of fossil fuels greatly restrict the rapid development of human technology and industry, which has led to a high demand for the development of new and clean energy sources. Hydrogen, due to its high calorific value and environmentally friendly combustion products, is undoubtedly a very promising energy carrier. The current methods of industrial hydrogen production are mainly water electrocatalytic decomposition or fossil fuels conversion, which also results in the waste of other energy sources. Since only one-step is involved during the conversion from solar to chemical energy and thus unnecessary energy waste is avoided, solar energy photocatalytic decomposition of water provides a more viable method for hydrogen production. The utilization of biohybrid molecules, which are widely available in nature and environmentally friendly, further reduce the cost of such photocatalytic systems. This Review discusses the research progress on hydrogen production using biohybrid molecules for photocatalytic hydrogen evolution. The basic reaction mechanism, general types and system structures about biohybrid molecule-based photocatalysts are summarized. The current challenges and prospects in the research of water splitting hydrogen evolution by biohybrid molecules photocatalysts are presented.

Visible-light driven reaction of CO2 with alcohols using a Ag/CeO2 nanocomposite: first photochemical synthesis of linear carbonates under mild conditions

The first photochemical synthesis of linear carbonates from the reaction of CO₂ with alcohols using a silver-doped ceria nanocomposite at room temperature under visible light irradiation is described. DFT calculations suggested the electron transfer from Ag 4d states to Ce 4f states in the composite for the photoreaction.

Metal Halide Perovskite Based Heterojunction Photocatalysts

With fascinating photophysical properties and a strong potential to utilize solar energy, metal halide perovskites (MHPs) have become a prominent feature within photocatalysis research. However, the effectiveness of single MHP photocatalysts is relatively poor. The introduction of a second component to form a heterojunction represents a well-established route to accelerate carrier migration and boost reaction rates, thus increasing the photoactivity. Recently, there have been several scientific advances related to the design of MHP-based heterojunction photocatalysts, including Schottky, type II, and Z-scheme heterojunctions. In this Review, we systematically discuss and critically appraise recent developments in MHP-based heterojunction photocatalysis. In addition, the techniques for identifying the type of active heterojunctions are evaluated and we conclude by briefly outlining the ongoing challenges and future directions for promising photocatalysts based on MHP heterojunctions.

Tantalum Oxide as an Efficient Alternative Electron Transporting Layer for Perovskite Solar Cells

Electron transporting layers facilitating electron extraction and suppressing hole recombination at the cathode are crucial components in any thin-film solar cell geometry, including that of metal–halide perovskite solar cells. Amorphous tantalum oxide (Ta₂O₅) deposited by spin coating was explored as an electron transport material for perovskite solar cells, achieving power conversion efficiency (PCE) up to ~14%. Ultraviolet photoelectron spectroscopy (UPS) measurements revealed that the extraction of photogenerated electrons is facilitated due to proper alignment of bandgap energies. Steady-state photoluminescence spectroscopy (PL) verified efficient charge transport from perovskite absorber film to thin Ta₂O₅ layer. Our findings suggest that tantalum oxide as an n-type semiconductor with a calculated carrier density of ~7 × 10¹⁸/cm³ in amorphous Ta₂O₅ films, is a potentially competitive candidate for an electron transport material in perovskite solar cells.

Effect of Morphology and Plasmonic on Au/ZnO Films for Efficient Photoelectrochemical Water Splitting

To improve photoelectrochemical (PEC) water splitting, various ZnO nanostructures (nanorods (NRs), nanodiscs (NDs), NRs/NDs, and ZnO NRs decorated with gold nanoparticles) have been manufactured. The pure ZnO nanostructures have been synthesized using the successive ionic-layer adsorption and reaction (SILAR) combined with the chemical bath deposition (CBD) process at various deposition times. The structural, chemical composition, nanomorphological, and optical characteristics have been examined by various techniques. The SEM analysis shows that by varying the deposition time of CBD from 2 to 12 h, the morphology of ZnO nanostructures changed from NRs to NDs. All samples exhibit hexagonal phase wurtzite ZnO with polycrystalline nature and preferred orientation alongside (002). The crystallite size along (002) decreased from approximately 79 to 77 nm as deposition time increased from 2 to 12 h. The bandgap of ZnO NRs was tuned from 3.19 to 2.07 eV after optimizing the DC sputtering time of gold to 4 min. Via regulated time-dependent ZnO growth and Au sputtering time, the PEC performance of the nanostructures was optimized. Among the studied ZnO nanostructures, the highest photocurrent density (Jph) was obtained for the 2 h ZnO NRs. As compared with ZnO NRs, the Jph (7.7 mA/cm2) of 4 min Au/ZnO NRs is around 50 times greater. The maximum values of both IPCE and ABPE are 14.2% and 2.05% at 490 nm, which is closed to surface plasmon absorption for Au NPs. There are several essential approaches to improve PEC efficiency by including Au NPs into ZnO NRs, including increasing visible light absorption and minority carrier absorption, boosting photochemical stability, and accelerating electron transport from ZnO NRs to electrolyte carriers.

Unprecedented Ag-Cu2O composited mesocrystals with efficient charge separation and transfer as well as visible light harvesting for enhanced photocatalytic activity

Mesocrystals with highly ordered subunits can provide good charge transfer tunnels and more active sites for catalytic reactions. So far, single-component mesocrystals have been well-developed in metals or metal oxides in the past decades, but the construction of mesocrystals in nanocomposites has been a great challenge. Herein we demonstrated a simple, one-pot wet chemical strategy for the preparation of plate-like Ag-Cu2O composited mesocrystals (CMCs) without any organic capping agent, which broke through the traditional dependence on organic capping agents for the synthesis of mesocrystals. As expected, these unprecedented Ag-Cu2O CMCs displayed superior visible-light-driven photodegradation performance toward tetracycline solution compared to the core-shell Ag@Cu2O and pure Cu2O photocatalysts. The improved photocatalytic activity of Ag-Cu2O CMCs could be ascribed to the synergistic effect of an ordered crystallographic orientation, the Schottky barrier and localized surface plasmon resonance (LSPR) for simultaneously enhancing charge separation and transfer as well as visible light harvesting. This research might stimulate in-depth investigations on the exploration of new synthetic methods for the design and construction of novel composited mesocrystals.

Recent Advances in Plasmonic Nanostructures for Enhanced Photocatalysis and Electrocatalysis

Plasmonic nanomaterials coupled with catalytically active surfaces can provide unique opportunities for various catalysis applications, where surface plasmons produced upon proper light excitation can be adopted to drive and/or facilitate various chemical reactions. A brief introduction to the localized surface plasmon resonance and recent design and fabrication of highly efficient plasmonic nanostructures, including plasmonic metal nanostructures and metal/semiconductor heterostructures is given. Taking advantage of these plasmonic nanostructures, the following highlights summarize recent advances in plasmon-driven photochemical reactions (coupling reactions, O₂ dissociation and oxidation reactions, H₂ dissociation and hydrogenation reactions, N₂ fixation and NH₃ decomposition, and CO₂ reduction) and plasmon-enhanced electrocatalytic reactions (hydrogen evolution reaction, oxygen reduction reaction, oxygen evolution reaction, alcohol oxidation reaction, and CO₂ reduction). Theoretical and experimental approaches for understanding the underlying mechanism of surface plasmon are discussed. A proper discussion and perspective of the remaining challenges and future opportunities for plasmonic nanomaterials and plasmon-related chemistry in the field of energy conversion and storage is given in conclusion.

A flower-like Zn3V2O8/Ag composite with enhanced visible light driven photocatalytic activity: the triple-functional roles of Ag nanoparticles

Coprecipitation, calcination and photoreduction, in a combined method, were successfully employed to fabricate a flower-like Zn₃V₂O₈ (ZnVO)/nano-precipitated Ag composite powder.

N-rich covalent organic polymer in situ modified TiO2 for highly efficient photocatalytic hydrogen evolution

TiO₂ has been everlastingly employed as popular photocatalyst for water splitting. However, the wide band gap (3.0-3.2 eV) and poor absorption to visible light of TiO₂ result in a low utilization of solar energy and limit its large-scale application. To decrease its band gap and promote the utilization of full solar energy, we here modified TiO₂ by in situ growth of N-rich covalent organic polymer (termed as COP_HM). During the in situ growth of COP_HM on the surface of TiO₂, intimate contacts between TiO₂ and COP_HM were built and core-shell structures were finally formed. The derived TiO₂@COP_HM demonstrated a narrower band gap (2.53 eV) compared to raw TiO₂ (3.13 eV) and improved absorption to visible light. The optimal TiO₂@COP_HM hybrid exhibited excellent hydrogen evolution performance of 162.7 μmol h^-1 under simulated sunlight which was more than 3 times higher than raw TiO₂ (51.3 μmol h^-1). Particularly, visible light hydrogen evolution rate of TiO₂@COP_HM reached 0.65 μmol h^-1 while non-hydrogen generation was observed using raw TiO₂.

Hydrothermal Cation Exchange Enabled Gradual Evolution of Au@ZnS-AgAuS Yolk-Shell Nanocrystals and Their Visible Light Photocatalytic Applications

Yolk-shell hybrid nanoparticles with noble metal core and programmed semiconductor shell composition may exhibit synergistic effects and tunable catalytic properties. In this work, the hydrothermal cation exchange synthesis of Au@ZnS-AgAuS yolk-shell nanocrystals (Y-S NCs) with well-fabricated void size, grain-boundary-architectured ZnS-AgAuS shell and in situ generated Au cocatalyst are demonstrated. Starting from the novel cavity-free Au@AgAuS core-shell NCs, via aqueous cation exchange reaction with Zn2+, the gradual evolution with produced Au@ZnS-AgAuS Y-S NCs can be achieved successfully. This unprecedented evolution can be reasonably explained by cation exchange initialized chemical etching of Au core, followed by the diffusion through the shell to be AgAuS and then ZnS. By hydrothermal treatment provided optimal redox environment, Au ions in shell were partially reduced to be Au NCs on the surface. The UV-vis absorption spectra evolution and visible light photocatalytic performances, including improved photodegradation behavior and photocatalytic hydrogen evolution activity, have demonstrated their potential applications. This new one-pot way to get diverse heterointerfaces for better photoinduced electron/hole separation synergistically can be anticipated for more kinds of photocatalytic organic synthesis.

Superstructure Ta2O5 mesocrystals derived from (NH4)2Ta2O3F6 mesocrystals with efficient photocatalytic activity

Superstructured mesocrystalline Ta₂O₅ nanosheets were successfully prepared from mesocrystalline (NH₄)₂Ta₂O₃F₆ nanorods by the annealing method.

Enhanced photocatalytic performance and stability of visible-light-driven Z-scheme CdS/Ag/g-C3N4 nanosheets photocatalyst

A novel Z-scheme CdS/Ag/g-C₃N₄ nanosheets photocatalyst was synthesized by combining the hydrothermal and photo-deposition techniques, where Ag nanoparticles as carrier transport channels significantly improve the separation efficiency of electron–hole pairs.

Rhodamine B in dissolved and nano-bound forms: Indicators for light-based advanced oxidation processes

Rhodamine B (RhB) is a water-soluble fluorescent dye that is often used to determine flux and flow direction in biotechnological and environmental applications. In the current research, RhB in soluble (termed free) and virus-bound (termed nano-bound) forms was used as an efficiency indicator for three environmental processes. The degradation of free and nano-bound RhB by (i) direct UV photolysis and (ii) UV/H₂O₂ advanced oxidation process (AOP) was studied in a collimated beam apparatus equipped with medium-pressure mercury vapor lamp. The degradation by (iii) solar light-induced photocatalysis was studied in a solar simulator with titanium dioxide and bismuth photocatalysts. Results showed negligible RhB degradation by direct UV and solar light, and its nearly linear degradation by UV/H₂O₂ and photocatalysis/photosensitization in the presence of a solid catalyst. Considerable adsorption of free RhB on bismuth-based catalyst vs. no adsorption of nano-bound RhB on this catalyst or of any form of the dye on titanium dioxide produced two important conclusions. First, the better degradation of free RhB by the bismuth catalyst suggests that close proximity of a catalyst hole and the decomposing molecule significantly influences degradation. Second, the soluble form of the dye might not be the best option for its use as an indicator. Nano-bound RhB showed high potential as an AOP indicator, featuring possible separation from water after the analysis.

Smart Utilization of Carbon Dots in Semiconductor Photocatalysis

Efficient capture of solar energy will be critical to meeting the energy needs of the future. Semiconductor photocatalysis is expected to make an important contribution in this regard, delivering both energy carriers (especially H₂ ) and valuable chemical feedstocks under direct sunlight. Over the past few years, carbon dots (CDs) have emerged as a promising new class of metal-free photocatalyst, displaying semiconductor-like photoelectric properties and showing excellent performance in a wide variety of photoelectrochemical and photocatalytic applications owing to their ease of synthesis, unique structure, adjustable composition, ease of surface functionalization, outstanding electron-transfer efficiency and tunable light-harvesting range (from deep UV to the near-infrared). Here, recent advances in the rational design of CDs-based photocatalysts are highlighted and their applications in photocatalytic environmental remediation, water splitting into hydrogen, CO₂ reduction, and organic synthesis are discussed.

Au nanoparticle sensitized ZnO nanopencil arrays for photoelectrochemical water splitting

This paper describes the synthesis of Au nanoparticle sensitized ZnO nanopencil arrays on F-doped SnO2 substrates by an aqueous chemical growth and subsequent photoreduction method. The Au-ZnO nanopencil arrays yield a photocurrent of ∼ 1.5 mA cm(-2) at 1 V versus Ag/AgCl. The enhanced photocurrent is attributed to the surface plasmon resonance effect of Au nanoparticles and the prolonged lifetime of the photo-generated electron-hole pairs. The improved stability of ZnO is due to the plasmon resonance energy transfer process enabled by the Au nanoparticles, which enhances the electric field intensity in a small, well-defined location of the ZnO semiconductor.

Hierarchical TiO2 spheres decorated with Au nanoparticles for visible light hydrogen production

Hierarchical TiO₂ spheres composed of nanosheets are successfully synthesized via a simple solvothermal route.

Gold nanoparticles-sensitized wide and narrow band gap TiO2 for visible light applications: a comparative study

Photocatalytic degradation of dyes and organic compounds by Au/P-TiO₂ and Au/M-TiO₂ nanocomposites under visible light irradiation.

Nanogold plasmonic photocatalysis for organic synthesis and clean energy conversion

This review provides the basic concepts, an overall survey and the state-of-the art of plasmon-based nanogold photocatalysis using visible light including fundamental understanding and major applications to organic reactions and clean energy-conversion systems. First, the basic concepts of localized surface plasmon resonance (LSPR) are recalled, then the major preparation methods of AuNP-based plasmonic photocatalysts are reviewed. The major part of the review is dedicated to the latest progress in the application of nanogold plasmonic photocatalysis to organic transformations and energy conversions, and the proposed mechanisms are discussed. In conclusion, new challenges and perspectives are proposed and analyzed.