Remarkable effect of soft-templating synthesis procedure on catalytic properties of mesoporous carbon supported Ni in hydrodechlorination of trichloroethylene in liquid phase

Preparation of Fe/Cu bimetals by ball milling iron powder and copper sulfate for trichloroethylene degradation: Combined effect of FeSx and Fe/Cu alloy

The addition of a secondary metal (such as Cu, Co, Ni and Pd) to form iron-based bimetallic particles could enhance the reactivity of zero valent iron (ZVI). This study proposed a new synthesis method for preparing Cu-Fe bimetals (Cu-Febm (CuSO4)) by ball milling mZVI and CuSO4. During ball-milling process, 40% of Cu2+ can be reduced to Cu0, which formed galvanic couple with Fe0 in a way of Fe/Cu alloy structure. Part Cu2+ was only reduced to Cu+ (corresponding to Cu2O), while 29% of SO42- was reduced to Sx2- (corresponding to FeSx). The appearance of Cu2O was not conducive to the activity of Cu-Febm (CuSO4) particles, the formation of Fe0/FeSx structure compensated for the partial loss of Fe/Cu alloy. H•abs was identified as the main active species for TCE degradation by Cu-Febm (CuSO4) bimetals. The Cu-Febm (CuSO4) bimetals has great potential for the removal of chlorinated hydrocarbons in water.

Liquid-phase hydrodechlorination of trichloroethylene driven by nascent H2 under an open system: Hydrogenation activity, solvent effect and sulfur poisoning

Hydrodechlorination is a promising technology for the remediation of water body contaminated with trichloroethylene (TCE). In this work, the liquid-phase hydrogenation of TCE by Raney Ni (R-Ni) and Pd/C under an open system have been studied, in which nascent H₂ (Nas-H₂) generated in situ from the cathode acted as a hydrogen source. Experimental results showed that TCE was completely eliminate from the solution through the synergistic effects of hydrodechlorination and air flotation due to the formation of continuous micro/nano-sized Nas-H₂ bubbles from the cathode. Furthermore, the effects of inorganic anions and organic solvents on R-Ni and Pd/C hydrogenation activity were investigated, respectively. The results showed that NO₃^- and acetonitrile can form a competitive reaction with TCE; Sulfur with lone-pair electrons will cause irreversible poisoning to these two catalysts, and have a stronger inhibitory effect on Pd/C. This work helps to realize the separation of volatile halogenated compounds from water environment and provides certain data support for the choice of catalyst in the actual liquid-phase hydrogenation system.

The Effect of Shape-Controlled Pt and Pd Nanoparticles on Selective Catalytic Hydrodechlorination of Trichloroethylene

Tailoring the shape of nanoscale materials enables obtaining morphology-controlled surfaces exhibiting specific interactions with reactants during catalytic reactions. The specifics of nanoparticle surfaces control the catalytic performance, i.e., activity and selectivity. In this study, shape-controlled Platinum (Pt) and Palladium (Pd) nanoparticles with distinct morphology were produced, i.e., cubes and cuboctahedra for Pt and spheres and polyhedra/multiple-twins for Pd, with (100), (111 + 100), curved/stepped and (111) facets, respectively. These particles with well-tuned surfaces were subsequently deposited on a Zirconium oxide (ZrO2) support. The morphological characteristics of the particles were determined by high resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD), while their adsorption properties were investigated by Fourier transform infrared spectroscopy (FTIR) of CO adsorbed at room temperature. The effect of the nanoparticle shape and surface structure on the catalytic performance in hydrodechlorination (HDCl) of trichloroethylene (TCE) was examined. The results show that nanoparticles with different surface orientations can be employed to affect selectivity, with polyhedral and multiply-twinned Pd exhibiting the best ethylene selectivity.

A CuNi bimetallic cathode with nanostructured copper array for enhanced hydrodechlorination of trichloroethylene (TCE)

To address the challenges of low hydrodechlorination efficiency by non-noble metals, a CuNi bimetallic cathode with nanostructured copper array film was fabricated for effective electrochemical dechlorination of trichloroethylene (TCE) in aqueous solution. The CuNi bimetallic cathodes were prepared by a simple one-step electrodeposition of copper onto the Ni foam substrate, with various electrodeposition time of 5/10/15/20 min. The optimum electrodeposition time was 10 min when copper was coated as a uniform nanosheet array on the nickel foam substrate surface. This cathode exhibited the highest TCE removal, which was twice higher compared to that of the nickel foam cathode. At the same passed charge of 1080C, TCE removal increased from 33.9 ± 3.3% to 99.7 ± 0.1% with the increasing operation current from 5 to 20 mA cm^-2, while the normalized energy consumption decreased from 15.1 ± 1.0 to 2.6 ± 0.01 kWh log^-1 m^-3. The decreased normalized energy consumption at a higher current density was due to the much higher removal efficiency at a higher current. These results suggest that CuNi cathodes prepared by simple electrodeposition method represent a promising and cost-effective approach for enhanced electrochemical dechlorination.

Reductive dechlorination of trichloroethylene by polyvinylpyrrolidone stabilized nanoscale zerovalent iron particles with Ni

We developed a novel stabilized nanoscale zerovalent iron (NZVI) particles with Ni using an electron conducting polymer, polyvinylpyrrolidone (PVP), to selectively dechlorinate trichloroethylene (TCE) to non-toxic intermediates. The size of the PVP stabilized NZVI-Ni ((PVP-NZVI-Ni), average diameter: ∼20nm) is smaller than that of bare NZVI (50-80nm) due to the prevention of agglomeration of the resultant iron particles by PVP. PVP-NZVI-Ni showed a complete removal of TCE in 1h with superior dechlorination kinetics (k_obs=5.702h^-1) and ethane selectivity (98%), while NZVI-Ni showed 5 times slower dechlorination kinetics (1.218h^-1). Other PVP-NZVI-metals (i.e., Cu, Sn, Co, and Mn) also enhanced the TCE dechlorination, but they were much slower (k_obs=0.024-0.411h^-1) than that of PVP-NZVI-Ni. In column test, PVP-NZVI-Ni exhibited better mobility (95% of PVP-NZVI-Ni recovery in the eluent) than NZVI-Ni (1%). In addition, PVP-NZVI-Ni reductively transform TCE to ethane even under 10 cycles of repeated TCE dechlorination treatment.